Some compilers apparently noticed that p2len was allowed to be equal
to msg, and so maybe we would be doing memset(prompt2, ' ', 0), and
decided that we probably meant to do memset(prompt2, 0, 0x20);
instead.
Stupid compilers, doing optimization before this kind of warning!
My fix is to just fill the entire prompt2 buffer with spaces,
because it's harmless.
Bugfix on e59f0d4cb9, not in any released Tor.
(Specifically, carriage return after a quoted value in a config
line. Fixes bug 19167; bugfix on 0.2.0.16-alpha when we introduced
support for quoted values. Unit tests, changes file, and this
parenthetical by nickm.)
This is a kludge to deal with the fact that `tor_addr_t` doesn't contain
`sun_path`. This currently ONLY happens when circuit isolation is being
checked, for an isolation mode that is force disabled anyway, so the
kludge is "ugly but adequate", but realistically, making `tor_addr_t`
and the AF_UNIX SocksPort code do the right thing is probably the better
option.
Closes ticket 20303.
The LIBRESSL_VERSION_NUMBER check is needed because if our openssl
is really libressl, it will have an openssl version number we can't
really believe.
Previously, we would reject even rendezvous connections to IPv6
addresses when IPv6Exit was false. But that doesn't make sense; we
don't count that as "exit"ing. I've corrected the logic and tried
to make it a lottle more clear.
Fixes bug 18357; this code has been wrong since 9016d9e829 in
0.2.4.7-alpha.
When deleting unsuitable addresses in get_interface_address6_list(), to
avoid reordering IPv6 interface addresses and keep the order returned by
the OS, use SMARTLIST_DEL_CURRENT_KEEPORDER() instead of
SMARTLIST_DEL_CURRENT().
This issue was reported by René Mayrhofer.
[Closes ticket 20163; changes file written by teor. This paragraph
added by nickm]
We removed that feature in 0.2.4.2-alpha, but some comments seem to
have lingered.
I didn't add a changes/ file since this is just internal code cleanup.
(like clients do) rather than old-style router descriptors. Now bridges
will blend in with clients in terms of the circuits they build.
Fixes bug 6769; bugfix on 0.2.3.2-alpha.
Clients that use bridges were ignoring their cached microdesc-flavor
consensus files, because they only thought they should use the microdesc
flavor once they had a known-working bridge that could offer microdescs,
and at first boot no bridges are known-working.
This bug caused bridge-using clients to download a new microdesc consensus
on each startup.
Fixes bug 20269; bugfix on 0.2.3.12-alpha.
The client addr is essentially meaningless in this context (yes, it is
possible to explicitly `bind()` AF_LOCAL client side sockets to a path,
but no one does it, and there are better ways to grant that sort of
feature if people want it like using `SO_PASSCRED`).
As before, we check server protocols whenever server_mode(options)
is true and we check client protocols whenever server_mode(options)
is false.
Additionally, we now _also_ check client protocols whenever any
client port is set.
(Technically, we could just remove extend2 cell checking entirely,
since all Tor versions on our network are required to have it, but
let's keep this around as an example of How To Do It.)
(Despite the increased size of the consensus, this should have
approximately zero effect on the compressed consensus size, since
the "proto" line should be completely implied by the "v" line.)
[This is a brute-force method that potentially uses way too much
RAM. Need to rethink this a little. Right now you can DOS an
authority by saying "Foo=1-4294967295".]
Sierra provides clock_gettime(), but not pthread_condattr_setclock.
So we had better lot try to use CLOCK_MONOTONIC as our source for
time when waiting, since we ccan never actually tell the condition
that we mean CLOCK_MONOTONIC.
This isn't a tor bug yet, since we never actually pass a timeout to
tor_cond_wait() outside of the unit tests.
Not telling the cmux would sometimes cause an assertion failure in
relay.c when we tried to get an active circuit and found an "active"
circuit with no cells.
Additionally, replace that assert with a test and a log message.
Fix for bug 20203. This is actually probably a bugfix on
0.2.8.1-alpha, specifically my code in 8b4e5b7ee9 where I
made circuit_mark_for_close_() do less in order to simplify our call
graph. Thanks to "cypherpunks" for help diagnosing.
Our use of the (mockable) tor_close_socket() in the util/socket_..
tests confused coverity, which could no longer tell that we were
actually closing the sockets.
It's a macro that calls down to a function whose behavior has been
getting progresively more complicated.... but we named it as if it
were a variable. That's not so smart. So, replace it with a
function call to a function that was just doing "return
current_consensus".
Fixes bug 20176.
Commit 41cc1f612b introduced a "dns_request"
configuration value which wasn't set to 1 for an entry connection on the
DNSPort leading to a refusal to resolve the given hostname.
This commit set the dns_request flag by default for every entry connection
made to the DNSPort.
Fixes#20109
Signed-off-by: David Goulet <dgoulet@torproject.org>
For a brief moment in networkstatus_set_current_consensus(), the old
consensus has been freed, but the node_t objects still have dead
pointers to the routerstatus_t objects within it. During that
interval, we absolutely must not do anything that would cause Tor to
look at those dangling pointers.
Unfortunately, calling the (badly labeled!) current_consensus macro
or anything else that calls into we_use_microdescriptors_for_circuits(),
can make us look at the nodelist.
The fix is to make sure we identify the main consensus flavor
_outside_ the danger zone, and to make the danger zone much much
smaller.
Fixes bug 20103. This bug has been implicitly present for AGES; we
just got lucky for a very long time. It became a crash bug in
0.2.8.2-alpha when we merged 35bbf2e4a4 to make
find_dl_schedule start looking at the consensus, and 4460feaf28
which made node_get_all_orports less (accidentally) tolerant of
nodes with a valid ri pointer but dangling rs pointer.
Previously, the IV and key were stored in the structure, even though
they mostly weren't needed. The only purpose they had was to
support a seldom-used API where you could pass NULL when creating
a cipher in order to get a random key/IV, and then pull that key/IV
back out.
This saves 32 bytes per AES instance, and makes it easier to support
different key lengths.
* Check consistency between the two single onion torrc options
* Use the more relevant option each time we check for single onion mode
* Clarify log messages
* Clarify comments
* Otherwise, no behaviour change
Tor checks that the flag matches the configured onion service anonymity.
Tor refuses to create unflagged onion service using ADD_ONION, if they
would be non-anonymous. The error is:
512 Tor is in non-anonymous onion mode
Similarly, if the NonAnonymous flag is present, and Tor has the default
anonymous onion config:
512 Tor is in anonymous onion mode
Parse the value to UseEntryNodes_option, then set UseEntryNodes before
validating options.
This way, Authorities, Tor2web, and Single Onion Services don't write
spurious "UseEntryNodes 0" lines to their configs. Document the fact that
these tor configurations ignore UseEntryNodes in the manual page.
Also reorder options validation so we modify UseEntryNodes first, then
check its value against EntryNodes.
And silence a warning about disabled UseEntryNodes for hidden services
when we're actually in non-anonymous single onion service mode.
We log this message every time we validate tor's options.
There's no need to log a duplicate in main() as well.
(It is impossible to run main() without validating our options.)
The changes in #19973 fixed ReachableAddresses being applied
too broadly, but they also broke Tor2web (somewhat unintentional)
compatibility with ReachableAddresses.
This patch restores that functionality, which makes intro and
rend point selection is consistent between Tor2web and Single Onion
Services.
Add experimental OnionServiceSingleHopMode and
OnionServiceNonAnonymousMode options. When both are set to 1, every
hidden service on a tor instance becomes a non-anonymous Single Onion
Service. Single Onions make one-hop (direct) connections to their
introduction and renzedvous points. One-hop circuits make Single Onion
servers easily locatable, but clients remain location-anonymous.
This is compatible with the existing hidden service implementation, and
works on the current tor network without any changes to older relays or
clients.
Implements proposal #260, completes ticket #17178. Patch by teor & asn.
squash! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! fixup! Implement Prop #260: Single Onion Services
Redesign single onion service poisoning.
When in OnionServiceSingleHopMode, each hidden service key is poisoned
(marked as non-anonymous) on creation by creating a poison file in the
hidden service directory.
Existing keys are considered non-anonymous if this file exists, and
anonymous if it does not.
Tor refuses to launch in OnionServiceSingleHopMode if any existing keys
are anonymous. Similarly, it refuses to launch in anonymous client mode
if any existing keys are non-anonymous.
Rewrite the unit tests to match and be more comprehensive.
Adds a bonus unit test for rend_service_load_all_keys().
(We check consensus method when deciding whether to assume a node is
valid. No need to check the consensus method for Running, since
we will never see a method before 13.)
Closes ticket 20001
g
The other test vectors are pretty complete, and get full coverage, I
believe.
This one test vector accounted for half the time spent in
test-slow. "Now that's slow!"
We have a mock for our RSA key generation function, so we now wire
it to pk_generate(). This covers all the cases that were not using
pk_generate() before -- all ~93 of them.
Previously, you needed to store the previous log severity in a local
variable, and it wasn't clear if you were allowed to call these
functions more than once.
The functions it warns about are:
assert, memcmp, strcat, strcpy, sprintf, malloc, free, realloc,
strdup, strndup, calloc.
Also, fix a few lingering instances of these in the code. Use other
conventions to indicate _intended_ use of assert and
malloc/realloc/etc.
We should consider them bugs. If they are happening intentionally,
we should use the log_test_helpers code to capture and suppress
them. But having them off-by-default has potential to cause
programming errors.
Previously setup_capture_of_logs would prevent log messages from
going to the console entirely. That's a problem, since sometimes
log messages are bugs! Now setup_capture_of_logs() acts sensibly.
If you really do need to keep a message from going to the console
entirely, there is setup_full_capture_of_logs(). But only use that
if you're prepared to make sure that there are no extraneous
messages generated at all.
Users can't run an anonymous client and non-anonymous single
onion service at the same time. We need to know whether we have
any client ports or sockets open to do this check.
When determining whether a client port (SOCKS, Trans, NATD, DNS)
is set, count unix sockets when counting client listeners. This
has no user-visible behaviour change, because these options are
set once and never read in the current tor codebase.
Don't count sockets when setting ControlPort_set, that's what
ControlSocket is for. (This will be reviewed in #19665.)
Don't count sockets when counting server listeners, because the code
that uses these options expects to count externally-visible ports.
(And it would change the behaviour of Tor.)
Copying the integer 42 in a char buffer has a different representation
depending on the endianess of the system thus that unit test was failing on
big endian system.
This commit introduces a python script, like the one we have for SRV, that
computes a COMMIT/REVEAL from scratch so we can use it as a test vector for
our encoding unit tests.
With this, we use a random value of bytes instead of a number fixing the
endianess issue and making the whole test case more solid with an external
tool that builds the COMMIT and REVEAL according to the spec.
Fixes#19977
Signed-off-by: David Goulet <dgoulet@torproject.org>
Check NoOnionTraffic before attaching a stream.
NoOnionTraffic refuses connections to all onion hostnames,
but permits non-onion hostnames and IP addresses.
Check NoDNSRequest, NoIPv4Traffic, and NoIPv6Traffic before
attaching a stream.
NoDNSRequest refuses connections to all non-onion hostnames,
but permits IP addresses.
NoIPv4Traffic refuses connections to IPv4 addresses, but resolves
hostnames.
NoIPv6Traffic refuses connections to IPv6 addresses, but resolves
hostnames.
Combined, they refuse all non-onion hostnames and IP addresses.
OnionTrafficOnly is equivalent to NoDNSRequest, NoIPv4Traffic,
and NoIPv6Traffic.
Add unit tests for parsing and checking option validity.
Add documentation for each flag to the man page.
Add changes file for all of #18693.
Parsing only: the flags do not change client behaviour (yet!)
Rely on onion_populate_cpath to check that we're only using
TAP for the rare hidden service cases.
Check and log if handshakes only support TAP when they should support
ntor.
When a client connects to an intro point not in the client's consensus,
or a hidden service connects to a rend point not in the hidden service's
consensus, we are stuck with using TAP, because there is no ntor link
specifier.
This bug had existed since 0.2.4.7-alpha, but now that we have
FallbackDirs by default, it actually matters.
Fixes bug 19947; bugfix on 0.2.4.7-alpha or maybe 0.2.8.1-alpha.
Rubiate wrote the patch; teor wrote the changes file.
Longer and more explicit log message so we don't confuse users with behind NAT with working configurations and state that public IP addresses only should be provided with "Address", won't work with internal addresses.
OpenBSD removes this function, and now that Tor requires Libevent 2,
we should also support the OpenBSD Libevent 2.
Fixes bug 19904; bugfix on 0.2.5.4-alpha.
