This code adds a new field to vote on: "params". It consists of a list of
sorted key=int pairs. The output is computed as the median of all the
integers for any key on which anybody voted.
Improved with input from Roger.
Adding the same vote to a networkstatus consensus leads to a memory leak
on the client side. Fix that by only using the first vote from any given
voter, and ignoring the others.
Problem found by Rotor, who also helped writing the patch. Thanks!
A vote may only contain exactly one signature. Make sure we reject
votes that violate this.
Problem found by Rotor, who also helped writing the patch. Thanks!
Fix an obscure bug where hidden services on 64-bit big-endian
systems might mis-read the timestamp in v3 introduce cells, and
refuse to connect back to the client. Discovered by "rotor".
Bugfix on 0.2.1.6-alpha.
(Given that we're pretty much assuming that int is 32 bits, and given that
hex values are always unsigned, taking out the "ul" from 0xff000000 should
be fine.)
Add a "getinfo status/accepted-server-descriptor" controller
command, which is the recommended way for controllers to learn
whether our server descriptor has been successfully received by at
least on directory authority. Un-recommend good-server-descriptor
getinfo and status events until we have a better design for them.
We were telling the controller about CHECKING_REACHABILITY and
REACHABILITY_FAILED status events whenever we launch a testing
circuit or notice that one has failed. Instead, only tell the
controller when we want to inform the user of overall success or
overall failure. Bugfix on 0.1.2.6-alpha. Fixes bug 1075. Reported
by SwissTorExit.
When we added support for fractional units (like 1.5 MB) I broke
support for giving units with no space (like 2MB). This patch should
fix that. It also adds a propoer tor_parse_double().
Fix for bug 1076. Bugfix on 0.2.2.1-alpha.
We were triggering a CLOCK_SKEW controller status event whenever
we connect via the v2 connection protocol to any relay that has
a wrong clock. Instead, we should only inform the controller when
it's a trusted authority that claims our clock is wrong. Bugfix
on 0.2.0.20-rc; starts to fix bug 1074. Reported by SwissTorExit.
- Refactor geoip.c by moving duplicate code into rotate_request_period().
- Don't leak memory when cleaning up cell queues.
- Make sure that exit_(streams|bytes_(read|written)) are initialized in all
places accessing these arrays.
- Read only the last block from *stats files and ensure that its timestamp
is not more than 25 hours in the past and not more than 1 hour in the
future.
- Stop truncating the last character when reading *stats files.
The only thing that's left now is to avoid reading whole *stats files into
memory.
Note that unlike subversion revision numbers, it isn't meaningful to
compare these for anything but equality. We define a sort-order anyway,
in case one of these accidentally slips into a recommended-versions
list.
If any the v3 certs we download are unparseable, we should actually
notice the failure so we don't retry indefinitely. Bugfix on 0.2.0.x;
reported by "rotator".
Once we had called log_free_all(), anything that tried to log a
message (like a failed tor_assert()) would fail like this:
1. The logging call eventually invokes the _log() function.
2. _log() calls tor_mutex_lock(log_mutex).
3. tor_mutex_lock(m) calls tor_assert(m).
4. Since we freed the log_mutex, tor_assert() fails, and tries to
log its failure.
5. GOTO 1.
Now we allocate the mutex statically, and never destroy it on
shutdown.
Bugfix on 0.2.0.16-alpha, which introduced the log mutex.
This bug was found by Matt Edman.
(This would be everywhere running OpenSSL 0.9.7x and earlier, including
all current Macintosh users.)
The code is based on Tom St Denis's LibTomCrypt implementation,
modified to be way less general and use Tor's existing facilities. I
picked this one because it was pretty fast and pretty free, and
because Python uses it too.
The more verbose logs that were added in ee58153 also include a string
that might not have been initialized. This can lead to segfaults, e.g.,
when setting up private Tor networks. Initialize this string with NULL.
Send circuit or stream sendme cells when our window has decreased
by 100 cells, not when it has decreased by 101 cells. Bug uncovered
by Karsten when testing the "reduce circuit window" performance
patch. Bugfix on the 54th commit on Tor -- from July 2002,
before the release of Tor 0.0.0. This is the new winner of the
oldest-bug prize.
I don't think we actually use (or plan to use) strtok_r in a reentrant
way anywhere in our code, but would be nice not to have to think about
whether we're doing it.
Relays no longer publish a new server descriptor if they change
their MaxAdvertisedBandwidth config option but it doesn't end up
changing their advertised bandwidth numbers. Bugfix on 0.2.0.28-rc;
fixes bug 1026. Patch from Sebastian.
Specifically, every time we get a create cell but we have so many already
queued that we refuse it.
Bugfix on 0.2.0.19-alpha; fixes bug 1034. Reported by BarkerJr.
The problem is that clients and hidden services are receiving
relay_early cells, and they tear down the circuit.
Hack #1 is for rendezvous points to rewrite relay_early cells to
relay cells. That way there are never any incoming relay_early cells.
Hack #2 is for clients and hidden services to never send a relay_early
cell on an established rendezvous circuit. That works around rendezvous
points that haven't upgraded yet.
Hack #3 is for clients and hidden services to not tear down the circuit
when they receive an inbound relay_early cell. We already refuse extend
cells at clients.
When determining how long directory requests take or how long cells spend
in queues, we were comparing timestamps on microsecond detail only to
convert results to second or millisecond detail later on. But on 32-bit
architectures this means that 2^31 microseconds only cover time
differences of up to 36 minutes. Instead, compare timestamps on
millisecond detail.
Now that we require EntryStatistics to be 1 for counting connecting
clients, unit tests need to set that config option, too.
Reported by Sebastian Hahn.
Changes to directory request statistics:
- Rename GEOIP statistics to DIRREQ statistics, because they now include
more than only GeoIP-based statistics, whereas other statistics are
GeoIP-dependent, too.
- Rename output file from geoip-stats to dirreq-stats.
- Add new config option DirReqStatistics that is required to measure
directory request statistics.
- Clean up ChangeLog.
Also ensure that entry guards statistics have access to a local GeoIP
database.
This new option will allow clients to download the newest fresh consensus
much sooner than they normally would do so, even if they previously set
FetchDirInfoEarly. This includes a proper ChangeLog entry and an updated man
page.
Introduce a threshold of 0.01% of bytes that must be read and written per
port in order to be included in the statistics. Otherwise we cannot include
these statistics in extra-info documents, because they are too big.
Change the labels "-written" and "-read" so that the meanings are as
intended.
The internal error "could not find intro key" occurs when we want to send
an INTRODUCE1 cell over a recently finished introduction circuit and think
we built the introduction circuit with a v2 hidden service descriptor, but
cannot find the introduction key in our descriptor.
My first guess how we can end up in this situation is that we are wrong in
thinking that we built the introduction circuit based on a v2 hidden
service descriptor. This patch checks if we have a v0 descriptor, too, and
uses that instead.
o Minor features:
- If we're a relay and we change our IP address, be more verbose
about the reason that made us change. Should help track down
further bugs for relays on dynamic IP addresses.
when we write out our stability info, detect relays that have slipped
through the cracks. log about them and correct the problem.
if we continue to see a lot of these over time, it means there's another
spot where relays fall out of the routerlist without being marked as
unreachable.
Marks the control port connection for flushing before closing when
the QUIT command is issued. This allows a QUIT to be issued during
a long reply over the control port, flushing the reply and then
closing the connection. Fixes bug 1015.
rather than the bandwidth values in each relay descriptor. This approach
opens the door to more accurate bandwidth estimates once the directory
authorities start doing active measurements. Implements more of proposal
141.
arma's rationale: "I think this is a bug, since people intentionally
set DirPortFrontPage, so they really do want their relay to serve that
page when it's asked for. Having it appear only sometimes (or roughly
never in Sebastian's case) makes it way less useful."
Fixes bug 1013; bugfix on 0.2.1.8-alpha.
Added a sanity check in config.c and a check in directory.c
directory_initiate_command_rend() to catch any direct connection attempts
when a socks proxy is configured.
If the Tor is running with AutomapHostsOnResolve set, it _is_
reasonable to do a DNS lookup on a .onion address. So instead we make
tor-resolve willing to try to resolve anything. Only if Tor refuses
to resolve it do we suggest to the user that resolving a .onion
address may not work.
Fix for bug 1005.
The rest of the code was only including event.h so that it could see
EV_READ and EV_WRITE, which we were using as part of the
connection_watch_events interface for no very good reason.
This patch adds a new compat_libevent.[ch] set of files, and moves our
Libevent compatibility and utilitity functions there. We build them
into a separate .a so that nothing else in src/commmon depends on
Libevent (partially fixing bug 507).
Also, do not use our own built-in evdns copy when we have Libevent
2.0, whose evdns is finally good enough (thus fixing Bug 920).
Fix an edge case where a malicious exit relay could convince a
controller that the client's DNS question resolves to an internal IP
address. Bug found and fixed by "optimist"; bugfix on 0.1.2.8-beta.
Fix an edge case where a malicious exit relay could convince a
controller that the client's DNS question resolves to an internal IP
address. Bug found and fixed by "optimist"; bugfix on 0.1.2.8-beta.
Hidden service clients didn't use a cached service descriptor that
was older than 15 minutes, but wouldn't fetch a new one either. Now,
use a cached descriptor no matter how old it is and only fetch a new
one when all introduction points fail. Fix for bug 997. Patch from
Marcus Griep.
Apparently all the stuff that does a linear scan over all the DNS
cache entries can get really expensive when your DNS cache is very
large. It's hard to say how much this will help performance, since
gprof doesn't count time spent in OpenSSL or zlib, but I'd guess 10%.
Also, this patch removes calls to assert_connection_ok() from inside
the read and write callbacks, which are similarly unneeded, and a
little costlier than I'm happy with.
This is probably worth backporting to 0.2.0.
Provide a useful warning when launch_circuit tries to make us use a
node we don't want to use. Just give an info message when this is a
normal and okay situation. Fix for logging issues in bug 984.
This patch adds a function to determine whether we're in the main
thread, and changes control_event_logmsg() to return immediately if
we're in a subthread. This is necessary because otherwise we will
call connection_write_to_buf, which modifies non-locked data
structures.
Bugfix on 0.2.0.x; fix for at least one of the things currently
called "bug 977".
Tas (thanks!) noticed that when *ListenAddress is set, Tor would
still warn on startup when *Port is low and hibernation is active.
The patch parses all the *ListenAddress lines, and checks the
ports. Bugfix on 0.2.1.15-rc
With the last fix of task 932 (5f03d6c), client requests are only added to
the history when they happen after the start of the current history. This
conflicts with the unit tests that insert current requests first (defining
the start of the client request history) followed by requests in the past.
The fix is to insert requests in chronological order in the unit tests.
- Write geoip stats to disk every 24 hours, not every hour.
- Remove configuration options and define reasonable defaults.
- Clear history of client requests every 24 hours (which wasn't done at
all before).
Specifically if you send SIGUSR1, it will add two lines to the log file:
May 22 07:41:59.576 [notice] Our DNS cache has 3364 entries.
May 22 07:41:59.576 [notice] Our DNS cache size is approximately 1022656
bytes.
[tweaked a bit by nickm]
Really, our idiocy was that we were calling event_set() on the same
event more than once, which sometimes led to us calling event_set() on
an event that was already inserted, thus making it look uninserted.
With this patch, we just initialize the timeout events when we create
the requests and nameservers, and we don't need to worry about
double-add and double-del cases at all.
If we ever add an event, then set it, then add it again, there will be
now two pointers to the event in the event base. If we delete one and
free it, the first pointer will still be there, and possibly cause a
crash later.
This patch adds detection for this case to the code paths in
eventdns.c, and works around it. If the warning message ever
displays, then a cleverer fix is in order.
{I am not too confident that this *is* the fix, since bug 957 is very
tricky. If it is, it is a bugfix on 0.2.0.}
When we got a descriptor that we (as an authority) rejected as totally
bad, we were freeing it, then using the digest in its RAM to look up its
download status. Caught by arma with valgrind. Bugfix on 0.2.1.9-alpha.
The trick is that we should assert that our next_mem pointer has not
run off the end of the array _before_ we realign the pointer, since
doing that could take us over the end... but only if we're on a system
where malloc() gives us ram in increments smaller than sizeof(void*).
Bridges are not supposed to publish router descriptors to the directory
authorities. It defeats the point of bridges when they are included in the
public relay directory.
This patch puts out a warning and exits when the node is configured as
a bridge and to publish v1, v2, or v3 descriptors at the same time.
Also fixes part of bug 932.
This matters because a cpuworker can close its socket when it
finishes. Cpuworker typically runs in another thread, so without a
lock here, we can have a race condition and get confused about how
many sockets are open. Possible fix for bug 939.
This might detect some possible causes of bug 930, and will at least
make sure we aren't doing some dumb memory-corruption stuff with the heap
and router-parsing.
This addresses the first part of bug 918. Users are now warned when
they try to use hibernation in combination with a port below 1024
when they're not on Windows. We don't want to die here, because
people might run Tor as root, use a capabilities system or some
other platform that will allow them to re-attach low ports.
Wording suggested by Marian
(Don't crash immediately if we have leftover chunks to free after
freeing chunks in a buffer freelist; instead log a debugging message
that might help.)
Now, when you call tor --digests, it dumps the SHA1 digest of each
source file that Tor was built with. We support both 'sha1sum' and
'openssl sha1'. If the user is building from a tarball and they
haven't edited anything, they don't need any program that calculates
SHA1. If they _have_ modified a file but they don't have a program to
calculate SHA1, we try to build so we do not output digests.
bytes (aka 20KB/s), to match our documentation. Also update
directory authorities so they always assign the Fast flag to relays
with 20KB/s of capacity. Now people running relays won't suddenly
find themselves not seeing any use, if the network gets faster
on average.
svn:r19305
IP address changes: directory mirrors were mistakenly telling them
their old address if they asked via begin_dir, so they never got
an accurate answer about their new address, so they just vanished
after a day. Should fix bugs 827, 883, and 900 -- but alas, only
after every directory mirror has upgraded.
svn:r19291
ago. This change should significantly improve client performance,
especially once more people upgrade, since relays that have been
a guard for a long time are currently overloaded.
svn:r19287
The directory authorities were refusing v3 consensus votes from
other authorities, since the votes are now 504K. Fixes bug 959;
bugfix on 0.0.2pre17 (where we raised it from 50K to 500K ;).
svn:r19194
When we used smartlist_free to free the list of succesful uploads
because we had succeeded in uploading everywhere, we did not actually
set the successful_uploads field to NULL, so later it would get freed
again in rend_service_descriptor_free. Fix for bug 948; bug
introduced in 0.2.1.6-alpha.
svn:r19073
tor_sscanf() only handles %u and %s for now, which will make it
adequate to replace sscanf() for date/time/IP parsing. We want this
to prevent attackers from constructing weirdly formed descriptors,
cells, addresses, HTTP responses, etc, that validate under some
locales but not others.
svn:r18760
It seems that 64-bit Sparc Solaris demands 64-bit-aligned access to
uint64_t, but does not 64-bit-align the stack-allocated char array we
use for cpuworker tags. So this patch adds a set/get_uint64 pair, and
uses them to access the conn_id field in the tag.
svn:r18743
It turns out that we weren't updating the _ExcludeExitNodesUnion set's
country numbers when we reloaded (or first loaded!) the IP-to-country
file. Spotted by Lark. Bugfix on 0.2.1.6-alpha.
svn:r18575
