ERR is if something fatal just happened
WARNING is something bad happened, but we're still running. The bad thing
is either a bug in the code, an attack or buggy protocol/implementation
of the remote peer, etc. The operator should examine the bad thing and
try to correct it.
(No error or warning messages should be expected. I expect most people
to run on -l warning eventually.)
NOTICE is never ever used.
INFO means something happened (maybe bad, maybe ok), but there's nothing
you need to (or can) do about it.
DEBUG is for everything louder than INFO.
svn:r486
redo all the config files for the new format (we'll redo them again soon)
fix (another! yuck) segfault in log_fn when input is too large
tor_tls_context_new() returns -1 for error, not NULL
fix segfault in check_conn_marked() on conn's that die during tls handshake
make ORs also initialize conn from router when we're the receiving node
make non-dirserver ORs upload descriptor to every dirserver on startup
add our local address to the descriptor
add Content-Length field to POST command
revert the Content-Length search in fetch_from_buf_http() to previous code
fix segfault in memmove in fetch_from_buf_http()
raise maximum allowed headers/body size in directory.c
svn:r484
'buf_t' is now an opaque type defined in buffers.c .
Router descriptors now include all keys; routers generate keys as
needed on startup (in a newly defined "data directory"), and generate
their own descriptors. Descriptors are now self-signed.
Implementation is not complete: descriptors are never published; and
upon receiving a descriptor, the directory doesn't do anything with
it.
At least "routers.or" and orkeygen are now obsolete, BTW.
svn:r483
Fixed up the assert_*_ok funcs some (more work remains)
Changed config so it reads either /etc/torrc or the -f arg, never both
Finally tracked down a nasty bug with our use of tls:
It turns out that if you ask SSL_read() for no more than n bytes, it
will read the entire record from the network (and maybe part of the next
record, I'm not sure), give you n bytes of it, and keep the remaining
bytes internally. This is fine, except our poll-for-read looks at the
network, and there are no bytes pending on the network, so we never know
to ask SSL_read() for more bytes. Currently I've hacked it so if we ask
for n bytes and it returns n bytes, then it reads again right then. This
will interact poorly with our rate limiting; we need a cleaner solution.
svn:r481
deal with content-length headers better when reading http
don't assume struct socks4_info is a packed struct
fail the socks handshake if destip is zero
flesh out conn_state_to_string() for dir conn
fix typo (bug) in connection_handle_read()
directory get is now called fetch, post is now upload
reopen logs on sighup
svn:r475
this paves the way for supporting socks5 and other handshakes
it also removes those pesky AP-only variables from connection_t
also hacked a fix for a bug where some streams weren't ending properly --
maybe because marked connections weren't flushing properly?
svn:r472
- signal support
- forking for DNS farm
- changes for async IO
- daemonizing
In other words, some files still don't build, and the ones that do build,
do nonblocking IO incorrectly.
I'm also not checking in the project files till I have a good place
for them.
svn:r380
i've eliminated the master dns process, so now the workers just
act like regular connections and are handled by the normal pollarray.
everything seems to still work. ;)
svn:r327
on startup, it forks off a master dns handler, which forks off dns
slaves (like the apache model). slaves as spawned as load increases,
and then reused. excess slaves are not ever killed, currently.
implemented topics. each topic has a receive window in each direction
at each edge of the circuit, and sends sendme's at the data level, as
per before. each circuit also has receive windows in each direction at
each hop; an edge sends a circuit-level sendme as soon as enough data
cells have arrived (regardless of whether the data cells were flushed
to the exit conns). removed the 'connected' cell type, since it's now
a topic command within data cells.
at the edge of the circuit, there can be multiple connections associated
with a single circuit. you find them via the linked list conn->next_topic.
currently each new ap connection starts its own circuit, so we ought
to see comparable performance to what we had before. but that's only
because i haven't written the code to reattach to old circuits. please
try to break it as-is, and then i'll make it reuse the same circuit and
we'll try to break that.
svn:r152
now tor can be run safely inside nat'ed areas that kill idle
connections; and the proxy can handle when you suspend your laptop
and then emerge hours later from a new domain.
svn:r125
prkey is only fetched when it's needed
tor nodes who aren't dirservers now fetch directories and autoconnect
to new nodes listed in the directory
default role is a non-dirserver node
svn:r120
revamped the router reading section
reference counting for crypto pk env's (so we can dup them)
we now read and write pem pk keys from string rather than from FILE*,
in anticipation of fetching directories over a socket
(so now on startup we slurp in the whole file, then parse it as a string)
fixed a bug in the proxy side, where you could get some circuits
wedged if they showed up while the connection was being made
svn:r110
httpap is obsolete; we support privoxy directly now!
smtpap is obsolete; need to find a good socks4a-enabled smtp proxy/client
I dub thee 0.0.1.
svn:r107
Servers are allowed to send 100 cells initially, and can't send more until
they receive a 'sendme' cell from that direction, indicating that they
can send 10 more cells. As it currently stands, the exit node quickly
runs out of window, and sends bursts of 10 whenever a sendme cell gets
to him. This is much much much faster (and more flexible) than the old
"give each circuit 1 kB/s and hope nothing overflows" approach.
Also divided out the connection_watch_events into stop_reading,
start_writing, etc. That way we can control them separately.
svn:r54
we're now much more robust when bandwidth varies: instead of forcing a
fixed bandwidth on the link, we instead use what the link will give us,
up to our bandwidth.
svn:r53
Each socket reads at most 'bandwidth' bytes per second sustained, but
can handle bursts of up to 10*bandwidth bytes.
Cells are now sent out at evenly-spaced intervals, with padding sent
out otherwise. Set Linkpadding=0 in the rc file to send cells as soon
as they're available (and to never send padding cells).
Added license/copyrights statements at the top of most files.
router->min and router->max have been merged into a single 'bandwidth'
value. We should make the routerinfo_t reflect this (want to do that,
Mat?)
As the bandwidth increases, and we want to stop sleeping more and more
frequently to send a single cell, cpu usage goes up. At 128kB/s we're
pretty much calling poll with a timeout of 1ms or even 0ms. The current
code takes a timeout of 0-9ms and makes it 10ms. prepare_for_poll()
handles everything that should have happened in the past, so as long as
our buffers don't get too full in that 10ms, we're ok.
Speaking of too full, if you run three servers at 100kB/s with -l debug,
it spends too much time printing debugging messages to be able to keep
up with the cells. The outbuf ultimately fills up and it kills that
connection. If you run with -l err, it works fine up through 500kB/s and
probably beyond. Down the road we'll want to teach it to recognize when
an outbuf is getting full, and back off.
svn:r50
basically, a twin is a router which is different except it shares
the same keypair. so in cases where we want to find a "next router"
and all we really care is that it can decrypt the next onion layer,
then a twin is just as good.
we still need to decide how to mark twins in the routerinfo_t and in
the routers config file.
svn:r30
The 'or' process can now be told (by the global_role variable) what
roles this server should play -- connect to all ORs, listen for ORs,
listen for OPs, listen for APs, or any combination.
* everything in /src/op/ is now obsolete.
* connection_ap.c now handles all interactions with application proxies
* "port" is now or_port, op_port, ap_port. But routers are still always
referenced (say, in conn_get_by_addr_port()) by addr / or_port. We
should make routers.c actually read these new ports (currently I've
kludged it so op_port = or_port+10, ap_port=or_port+20)
* circuits currently know if they're at the beginning of the path because
circ->cpath is set. They use this instead for crypts (both ways),
if it's set.
* I still obey the "send a 0 back to the AP when you're ready" protocol,
but I think we should phase it out. I can simply not read from the AP
socket until I'm ready.
I need to do a lot of cleanup work here, but the code appears to work, so
now's a good time for a checkin.
svn:r22
