Using an anonymous mmap() is a good way to get pages that we can set
kernel-level flags on, like minherit() or madvise() or mlock().
We're going to use that so that we can make uninheritable locked
pages to store PRNG data.
Because the test is adding entries to the "rend_cache" directly, the
rend_cache_increment_allocation() was never called which made the
rend_cache_clean() call trigger that underflow warning:
rend_cache/clean: [forking] Nov 29 09:55:04.024 [warn] rend_cache_decrement_allocation(): Bug: Underflow in rend_cache_decrement_allocation (on Tor 0.4.0.0-alpha-dev 2240fe63feb9a8cf)
The test is still good and valid.
Fixes#28660
Signed-off-by: David Goulet <dgoulet@torproject.org>
The code checked for sysctl being available and HW_PHYSMEM being
defined, but HW_USERMEM was actually being used with sysctl instead
of HW_PHYSMEM.
The case for OpenBSD, etc. use HW_PHYSMEM64 (which is obviously a
64-bit variant of HW_PHYSMEM) and the case for OSX uses HW_MEMSIZE
(which appears to be a 64-bit variant of HW_PHYSMEM).
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
We log these messages at INFO level, except when we are reading a
private key from a file, in which case we log at WARN.
This fixes a regression from when we re-wrote our PEM code to be
generic between nss and openssl.
Fixes bug 29042, bugfix on 0.3.5.1-alpha.
When cleaning up after an error in process_unix_exec, the stdin
pipe was being double closed instead of closing both the stdin
and stdout pipes. This occurred in two places.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
NOTE: This commit breaks the build, because there was a mistake in an
earlier change of exactly the sort that this is meant to detect! I'm
leaving it broken for illustration.
Test exactly what the geometric sampler returns, because that's what
the downstream callers of it are going to use.
While here, also assert that the geometric sampler returns a positive
integer. (Our geometric distribution is the one suported on {1, 2,
3, ...} that returns the number of trials before the first success,
not the one supported on {0, 1, 2, ...} that returns the number of
failures before the first success.)
In file included from ./src/core/or/or_circuit_st.h:12:0,
from src/core/or/circuitlist.c:112:
./src/core/or/circuit_st.h:15:39: error: redefinition of typedef ‘circpad_machine_spec_t’
./src/core/or/circuitpadding.h:572:3: note: previous declaration of ‘circpad_machine_spec_t’ was here
./src/core/or/circuit_st.h:16:40: error: redefinition of typedef ‘circpad_machine_state_t’
./src/core/or/circuitpadding.h:517:3: note: previous declaration of ‘circpad_machine_state_t’ was here
In file included from src/core/or/connection_edge.c:70:0:
./src/core/or/circuitpadding.h:16:26: error: redefinition of typedef ‘circuit_t’
./src/core/or/or.h:930:26: note: previous declaration of ‘circuit_t’ was here
./src/core/or/circuitpadding.h:17:33: error: redefinition of typedef ‘origin_circuit_t’
./src/core/or/or.h:931:33: note: previous declaration of ‘origin_circuit_t’ was here
./src/core/or/circuitpadding.h:18:23: error: redefinition of typedef ‘cell_t’
./src/core/or/or.h:628:23: note: previous declaration of ‘cell_t’ was here
typedef doesn't work for forward declarations, but plain struct
without a typedef wrapper does (and unlike the _t type aliases makes
it clearer for everyone whether you're talking about the struct or
the pointer).
Stop logging "Tried to establish rendezvous on non-OR circuit..." as
a warning. Instead, log it as a protocol warning, because there is
nothing that relay operators can do to fix it.
Fixes bug 29029; bugfix on 0.2.5.7-rc.
Prior to this commit, the testsuite was failing on OpenBSD. After
this commit the testsuite runs fine on OpenBSD.
It was previously decided to test for the OpenBSD macro (rather than
__OpenBSD__, etc.) because OpenBSD forks seem to have the former
macro defined. sys/param.h must be included for the OpenBSD macro
definition; however, many files tested for the OpenBSD macro without
having this header included.
This commit includes sys/param.h in the files where the OpenBSD macro
is used (and sys/param.h is not already included), and it also
changes some instances of the __OpenBSD__ macro to OpenBSD.
See commit 27df23abb6 which changed
everything to use OpenBSD instead of __OpenBSD__ or OPENBSD. See
also tickets #6982 and #20980 (the latter ticket is where it was
decided to use the OpenBSD macro).
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
In get_local_listener used by tor_ersatz_socketpair, the address
family used when binding the IPv6 socket was AF_INET instead of
AF_INET6.
Fixes bug 28995; bugfix on 0.3.5.1-alpha.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Reported on tor-dev by Gisle Vanem. Bug not in any released Tor
(The suggested patch used _MSC_VER, but that's not how we do stuff
with autoconf. With autoconf, you detect the feature you want,
rather than trying to list all the systems that do or do not have
it.)
In theory it would be better to detect this bug in advance, but this
approach is much simpler, and therefore safer to backport.
This closes tor issue 28973.
This project introduces the prob_distr.c subsystem which implements all the
probability distributions that WTF-PAD needs. It also adds unittests for all of
them.
Code and tests courtesy of Riastradh.
Co-authored-by: Taylor R Campbell <campbell+tor@mumble.net>
Co-authored-by: Mike Perry <mikeperry-git@torproject.org>
Hope is this will make it easier to test on the live tor network.
Does not need to be merged if we don't want to, but will come in handy
for researchers.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
This implements all of the event handling, state machines, and padding
decisions for circuit padding.
I recommend reviewing this after you look at the call-in points into it from
the rest of Tor.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
These callbacks allow the padding state machines to react to various types of
sent and received relay cells.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
These event callbacks allow circuit padding to decide when to attempt to
launch and negotiate new padding machines, and when to tear old ones down.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
This is a good code review start point, to get an overview of the interfaces
and types used in circuit padding.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
We need this for padding negotiation so that we can have later machine
revisions supercede earlier ones.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
signed_descriptor_digest has a length of DIGEST_LEN but the memset
used to fill it used DIGEST256_LEN.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Redefine the set of bootstrap phases to allow display of finer-grained
progress in the early connection stages of connecting to a relay.
This includes adding intermediate phases for proxy and PT connections.
Also add a separate new phase to indicate obtaining enough directory
info to build circuits so we can report that independently of actually
initiating an ORCONN to build the first application circuit.
Previously, we would claim to be connecting to a relay when we had
merely finished obtaining directory info.
Part of ticket 27167.
Replace a few invocations of control_event_bootstrap() with calls from
the bootstrap tracker subsystem. This mostly leaves behavior
unchanged. The actual behavior changes come in the next commit.
Part of ticket 27167.
Linked connections aren't woken up by libevent due to I/O but rather
artificially so we can, by chunks, empty the spooled object(s).
Commit 5719dfb48f (in 0.3.4.1-alpha) made it
that the schedule_active_linked_connections_event would be only called once at
startup but this is wrong because then we would never go through again the
active linked connections.
Fortunately, everytime a new linked connection is created, the event is
activated and thus we would go through the active list again. On a busy relay,
this issue is mitigated by that but on a slower relays or bridge, a connection
could get stuck for a while until a new directory information request would
show up.
Fixes#28717, #28912
Add a tracker for bootstrap progress, tracking events related to
origin circuit and ORCONN states. This uses the ocirc_event and
orconn_event publish-subscribe subsystems.
Part of ticket 27167.
Add a publish-subscribe subsystem to publish messages about changes to
origin circuits.
Functions in circuitbuild.c and circuitlist.c publish messages to this
subsystem.
Move circuit event constants out of control.h so that subscribers
don't have to include all of control.h to take actions based on
messages they receive.
Part of ticket 27167.
Add a publish-subscribe subsystem to publish messages about changes to
OR connections.
connection_or_change_state() in connection_or.c and
control_event_or_conn_event() in control.c publish messages to this
subsystem via helper functions.
Move state constants from connection_or.h to orconn_state.h so that
subscribers don't have to include all of connection_or.h to take
actions based on changes in OR connection state. Move event constants
from control.h for similar reasons.
Part of ticket 27167.
connection_or_change_state() saved an old_state to pass to
channel_tls_handle_state_change_on_orconn(), which promptly cast it to
void. Remove this unused variable and parameter.
This patch changes the CancelIoEx() example code to use CancelIo(),
which is available for older versions of Windows too. I still think the
kernel handles this nicely by sending broken pipes if either side
closes the pipe while I/O operations are pending.
See: https://bugs.torproject.org/28179
Handle `ERROR_BROKEN_PIPE` from ReadFileEx() and WriteFileEx() in
process_win32_stdin_write_done() and
process_win32_handle_read_completion() instead of in the early handler.
This most importantmly makes sure that `reached_eof` is set to true when
these errors appears.
See: https://bugs.torproject.org/28179
This patch adds some missing calls to set `reached_eof` of our handles
when various error conditions happens or when we close our handle (which
happens at `process_terminate()`.
See: https://bugs.torproject.org/28179
This patch adds some additional error checking after calls to
ReadFileEx() and WriteFileEx(). I have not managed to get this code to
reach the branch where `error_code` is NOT `ERROR_SUCCESS`, but MSDN
says one should check for this condition so we do so just to be safe.
See: https://bugs.torproject.org/28179
This patch makes us delay checking for whether we have an exit code
value (via GetExitCodeProcess()) until both stdout and stderr have been
closed by the operating system either by the process itself or by
process cleanup after termination.
See: https://bugs.torproject.org/28179
This patch adds support for the new STATUS message that PT's can emit
from their standard out. The STATUS message uses the `config_line_t` K/V
format that was recently added in Tor.
See: https://bugs.torproject.org/28846
This patch changes the LOG pluggable transport message to use the recent
K/V parser that landed in Tor. This allows PT's to specify the log
severity level as well as the message. A mapping between the PT log
severity levels and Tor's log serverity level is provided.
See: https://bugs.torproject.org/28846
Previously we had decoded the asn.1 to get a public key, and then
discarded the asn.1 so that we had to re-encode the key to store it
in the onion_pkey field of a microdesc_t or routerinfo_t.
Now we can just do a tor_memdup() instead, which should be loads
faster.
Previously, we would decode the PEM wrapper for keys twice: once in
get_next_token, and once later in PEM decode. Now we just do all of
the wrapper and base64 stuff in get_next_token, and store the
base64-decoded part in the token object for keys and non-keys alike.
This change should speed up parsing slightly by letting us skip a
bunch of stuff in crypto_pk_read_*from_string(), including the tag
detection parts of pem_decode(), and an extra key allocation and
deallocation pair.
Retaining the base64-decoded part in the token object will allow us
to speed up our microdesc parsing, since it is the asn1 portion that
we actually want to retain.
This patch makes sure that we terminate the event loop from the event
loop timer instead of directly in the process' exit handler. This allows
us to run the event loop an additional time to ensure that the SleepEx()
call on Windows is called and the data from stdout/stderr is delivered
to us.
Additionally we ensure that we don't try to read or write data from a
Unix process that have been terminated in the main loop, since its file
descriptors are closed at that time.
See: https://bugs.torproject.org/28179
This patch changes the API of the Windows backend of the Process
subsystem to allow the dormant interface to disable the Process event
timer.
See: https://bugs.torproject.org/28179
