Since the removal of ip->circuit_established, this function does litterally
nothing so clean it up.
Part of #32020
Signed-off-by: David Goulet <dgoulet@torproject.org>
By centralizing the circuit cleanup type that is: on close, free and
repurpose, some actions on the circuit can not happen for a certain cleanup
type or for all types.
This passes a cleanup type so the HS subsystem (v2 and v3) can take actions
based on the type of cleanup.
For instance, there is slow code that we do not run on a circuit close but
rather only on free.
Part of #32020
Signed-off-by: David Goulet <dgoulet@torproject.org>
Report back to the v3 subsystem any introduction point client circuit failure
so they can be noted down in the failure cache.
Fixes#32020
Signed-off-by: David Goulet <dgoulet@torproject.org>
Old and messy code path. Structure it in a more pleasant and readable way. No
behavior change with this refactor.
Part of #32020
Signed-off-by: David Goulet <dgoulet@torproject.org>
The FP_ identifiers referred to fingerprints, but they also applied
to address ranges. The router_status_t name invited confusion with
routerstasus_t. Fixes ticket 29826.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
router_status_t rtr_flags_t \
FP_INVALID RTR_INVALID \
FP_BADEXIT RTR_BADEXIT \
FP_REJECT RTR_REJECT
Refactor to decomplexify circuit_about_to_free() and finally have one single
entry point into the HS subsystems (v2 and v3) for when a circuit is freed.
With this, hs_circ_cleanup() becomes the one and only entry point when a
circuit is freed which then routes to the right subsystem version for any
actions to be taken.
This moves a big chunk of code from circuituse.c to rendclient.c. No behavior
change. Next commit will refactor it to reduce our technical debt.
Part of #32020
Signed-off-by: David Goulet <dgoulet@torproject.org>
We now keep descriptor that we can't decode due to missing client
authorization in the cache.
This new function is used when new client authorization are added and to tell
the client cache to retry decoding.
Part of #30382
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit extract most of the code that dirclient.c had to handle the end of
a descriptor directory requests (fetch). It is moved into hs_client.c in order
to have one single point of entry and the rest is fully handled by the HS
subsystem.
As part of #30382, depending on how the descriptor ended up stored (decoded or
not), different SOCKS error code can be returned.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This will allow us to callback into the HS subsytem depending on the decoding
status and return an extended SOCKS5 error code depending on the decoding
issue.
This is how we'll be able to tell the SocksPort connection if we are missing
or have bad client authorization for a service.
Part of #30382
Signed-off-by: David Goulet <dgoulet@torproject.org>
We now keep the descriptor in the cache, obviously not decoded, if it can't be
decrypted for which we believe client authorization is missing or unusable
(bad).
This way, it can be used later once the client authorization are added or
updated.
Part of #30382
Signed-off-by: David Goulet <dgoulet@torproject.org>
Using a standard ending here will let other tools that expect
markdown understand our output here.
This commit was automatically generated with:
for fn in $(find src -name '*.dox'); do \
git mv "$fn" "${fn%.dox}.md"; \
done
In our old design, we had to declare configuration structures (like
or_options_t) and variable tables (like option_vars_) separately,
and we used some magic to enforce their consistency (see
conftesting.h).
With this design, we write a single definition for the configuration
object and its fields, and use C macros to expand it either into a
structure, or a variable table. Since they are both made from the
same source, they can't become inconsistent.
The two designs can coexist happily, and we can migrate from one to
the other at our convenience.
When the relay module is disabled, make "ClientOnly 1" and
"DirCache 0" by default. (But keep "ClientOnly 0" and
"DirCache 1" as the defaults for the unit tests.)
And run "make autostyle".
Part of ticket 32410.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
get_dirportfrontpage relay_get_dirportfrontpage \
parse_port_config port_parse_config \
count_real_listeners port_count_real_listeners \
parse_transport_line pt_parse_transport_line \
ensure_bandwidth_cap config_ensure_bandwidth_cap \
get_effective_bwrate relay_get_effective_bwrate \
get_effective_bwburst relay_get_effective_bwburst \
warn_nonlocal_ext_orports port_warn_nonlocal_ext_orports \
parse_ports_relay port_parse_ports_relay \
update_port_set_relay port_update_port_set_relay \
get_transport_bindaddr_from_config pt_get_bindaddr_from_config \
get_options_for_server_transport pt_get_options_for_server_transport
It was generated with --no-verify, because it has some long lines.
Part of 32213.
This includes app, core, feature, lib, and tools, but excludes
ext, test, and trunnel.
This was generated by the following shell script:
cd src
for dname in $(find lib core feature app tools -type d |grep -v \\.deps$); do
keyword="$(echo "$dname" |sed -e "s/\//_/" )"
target="${dname}/${keyword}.dox"
echo "$target"
cat <<EOF >"$target"
/**
@dir ${dname}
@brief ${dname}
**/
EOF
git add "$target"
done
This commit:
* disables the ExtORPort, ServerTransportPlugin,
ServerTransportListenAddress, and ServerTransportOptions options,
when the relay module is disabled.
Part of 32213.
This commit:
* disables the ORPort, DirPort, DirCache, and BridgeRelay options,
* sets ClientOnly 1,
* disables relay_config.c and relay/transport_config.c,
* disables test_rebind.sh, and
* modifies the expected results for test_parseconf.sh,
when the relay module is disabled.
Part of 32213.
Minor simplification and refactoring.
Make the dirauth tests focus on testing the intention of the code,
rather than option processing order.
Part of 32213.
The DoS heartbeat now contains the number of rejected INTRODUCE2 cell that the
relay has seen.
Closes#31371
Signed-off-by: David Goulet <dgoulet@torproject.org>
This required a small refactoring so we could count properly the INTRO2
sending disallow.
Part of #31371
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit:
* moves dirauth stats and mtbf config actions into dirauth_config,
* adds thin wrappers to make the moved code compile.
The moved code is disabled when the dirauth module is disabled.
Part of 32213.
This commit:
* moves relay config actions into relay_config,
* moves get_dirportfrontpage() into relay_config,
* adds thin wrappers to make the moved code compile.
No functional changes: the moved code is still enabled,
even if the relay module is disabled. (Some of the checks
are re-ordered, so the order of some warnings may change.)
Part of 32213.
This commit:
* moves server transport config checks into transport_config.c,
* adds thin wrappers to make the moved code compile.
No functional changes: the moved code is still enabled,
even if the relay module is disabled. (Some of the checks
are re-ordered, so the order of some warnings may change.)
Part of 32213.
This commit:
* moves bandwidth checks into dirauth_config, and
* moves some other minor checks into dirauth_config.
The moved code is disabled when the dirauth module is disabled.
(And some of the checks are re-ordered, so the order of some
warnings may change.)
Part of 32213.
This commit:
* moves accounting and bandwidth checks into relay_config,
* moves testing options checks into relay_config,
* moves some other minor checks into relay_config,
* exposes some code from src/app/config.c
(we'll refactor it later in 29211), and
* adds thin wrappers to make the moved code compile.
No functional changes: the moved code is still enabled,
even if the relay module is disabled. (Some of the checks
are re-ordered, so the order of some warnings may change.)
Part of 32213.
This commit:
* creates feature/relay/transport_config.[ch],
* moves server transport config checks into them,
* exposes some code from src/app/config.c
(we'll refactor it later in 29211), and
* adds thin wrappers to make the moved code compile.
No functional changes: the moved code is still enabled,
even if the relay module is disabled. (Some of the checks
are re-ordered, so the order of some warnings may change.)
Part of 32213.
This commit:
* moves relay config checks into relay_config.[ch],
* exposes some code from src/app/config.c
(we'll refactor it later in 29211), and
* adds thin wrappers to make the moved code compile.
No functional changes: the moved code is still enabled,
even if the relay module is disabled. (Some of the checks
are re-ordered, so the order of some warnings may change.)
Part of 32213.
This commit:
* creates feature/relay/relay_config.[ch],
* moves relay port parsing into them,
* exposes some code from src/app/config.c
(we'll refactor it later in 29211), and
* adds thin wrappers to make the moved code compile.
No functional changes: the moved code is still enabled,
even if the relay module is disabled.
Part of 32213.
This commit:
* creates feature/dirauth/dirauth_config.[ch],
* moves the dirauth config code into them,
* copies some macros from src/app/config.c
(we'll refactor them later in 29211), and
* adds thin wrappers to make the moved code compile.
No functional changes: the moved code is still enabled,
even if the dirauth module is disabled.
Part of 32213.
When picking an intro point from the service descriptor, the client failed to
lookup the failure cache.
It made an HS v2 client re-pick bad intro points for which we already know it
won't work in the first place.
Based on Neel Chauhan original patch.
Fixes#25568
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
confparse.h confmgt.h \
confparse.c confmgt.c \
CONFPARSE_PRIVATE CONFMGT_PRIVATE \
TOR_CONFPARSE_H TOR_CONFMGT_H
The former foo_validate() functions are now toplevel
legacy_validate_fn callbacks. The new foo_validate() functions now
call them.
This change lets us remove the old shared_random disk state
validation callback entirely.
The current API of this callback mixes responsibilities, including:
* validation
* transition checking
* processing (modifying) the configuration object.
These will have to be disentangled piece by piece, so for now, we'll
have "legacy" validate functions as well.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
validate_fn_t legacy_validate_fn_t \
validate_fn legacy_validate_fn
