This is used for the bridge authority currently, to get a better
intuition on how many descriptors are actually fetched from it and how
many fetches happen in total.
Implements ticket 4200.
Fixes bug 4259, bugfix on 0.2.2.25-alpha. Bugfix by "Tey'".
Original message by submitter:
Changing nodes restrictions using a controller while Tor is doing
DNS resolution could makes Tor crashes (on WinXP at least). The
problem can be repeated by trying to reach a non-existent domain
using Tor:
curl --socks4a 127.0.0.1:9050 inexistantdomain.ext
.. and changing the ExitNodes parameter through the control port
before Tor returns a DNS resolution error (of course, the following
command won't work directly if the control port is password
protected):
echo SETCONF ExitNodes=TinyTurtle | nc -v 127.0.0.1 9051
Using a non-existent domain is needed to repeat the issue so that
Tor takes a few seconds for resolving the domain (which allows us to
change the configuration). Tor will crash while processing the
configuration change.
The bug is located in the addressmap_clear_excluded_trackexithosts
method which iterates over the entries of the addresses map in order
to check whether the changes made to the configuration will impact
those entries. When a DNS resolving is in progress, the new_adress
field of the associated entry will be set to NULL. The method
doesn't expect this field to be NULL, hence the crash.
Previously, we would treat an intro circuit failure as a timeout iff the
circuit failed due to a mismatch in relay identity keys. (Due to a bug
elsewhere, we only recognize relay identity-key mismatches on the first
hop, so this isn't as bad as it could have been.)
Bugfix on commit eaed37d14c, not yet in any
release.
It's too risky to have a function where if you leave one parameter
NULL, it splits up address:port strings, but if you set it, it does
hostname resolution.
Under the new convention, having a tor_addr.*lookup function that
doesn't do hostname resolution is too close for comfort.
I used this script here, and have made no other changes.
s/tor_addr_parse_reverse_lookup_name/tor_addr_parse_PTR_name/g;
s/tor_addr_to_reverse_lookup_name/tor_addr_to_PTR_name/g;
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Right now we can take the digests only of an RSA key, and only expect to
take the digests of an RSA key. The old tor_cert_get_id_digests() would
return a good set of digests for an RSA key, and an all-zero one for a
non-RSA key. This behavior is too error-prone: it carries the risk that
we will someday check two non-RSA keys for equality and conclude that
they must be equal because they both have the same (zero) "digest".
Instead, let's have tor_cert_get_id_digests() return NULL for keys we
can't handle, and make its callers explicitly test for NULL.
Also, define all commands > 128 as variable-length when using
v3 or later link protocol. Running into a var cell with an
unrecognized type is no longer a bug.
Without this patch, Tor wasn't sure whether it would be hibernating or
not, so it postponed opening listeners until after the privs had been
dropped. This doesn't work so well for low ports. Bug was introduced in
the fix for bug 2003. Fixes bug 4217, reported by Zax and katmagic.
Thanks!
One of its callers assumes a non-zero result indicates a permanent failure
(i.e. the current attempt to connect to this HS either has failed or is
doomed). The other caller only requires that this function's result
never equal -2.
Bug reported by Sebastian Hahn.
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
This is the cherry-picked 499661524b.
Previously Tor would always claim to have been given a hostname
by the client, while actually only verifying that the client
is using SOCKS4A or SOCKS5 with hostnames. Both protocol versions
allow IP addresses, too, in which case the log messages were wrong.
Fixes#4094.
Previously, we wouldn't refetch an HS's descriptor unless we didn't
have one at all. That was equivalent to refetching iff we didn't have
a usable one, but the next commit will make us keep some non-usable HS
descriptors around in our cache.
Code bugfix on the release that introduced the v2 HS directory system,
because rend_client_refetch_v2_renddesc's documentation comment should
have described what it actually did, not what its behaviour happened
to be equivalent to; no behaviour change in this commit.
Otherwise, we can wind up munging our reference counts if we set it in
the middle of loading the nodes. This happens because
nodelist_set_consensus() and microdesc_reload_cache() are both in the
business of adjusting microdescriptors' references.
we don't need to check whether we don't have enough guards right after
concluding that we do have enough.
slight efficiency fix suggested by an anonymous fellow on irc.
We were doing "divide bandwidth by 1000, then multiply by msec", but
that would lose accuracy: instead of getting your full bandwidth,
you'd lose up to 999 bytes per sec. (Not a big deal, but every byte
helps.)
Instead, do the multiply first, then the division. This can easily
overflow a 32-bit value, so make sure to do it as a 64-bit operation.
With managed proxies you would always get the error message:
"You have a Bridge line using the X pluggable transport, but there
doesn't seem to be a corresponding ClientTransportPlugin line."
because the check happened directly after parse_client_transport_line()
when managed proxies were not fully configured and their transports
were not registered.
The fix is to move the validation to run_scheduled_events() and make
sure that all managed proxies are configured first.
* Create mark/sweep functions for transports.
* Create a transport_resolve_conflicts() function that tries to
resolve conflicts when registering transports.
Previously the FooPort was ignored and the default used instead,
causing Tor to bind to the wrong port if FooPort and the default
port don't match or the CONN_TYPE_FOO_LISTENER has no default port.
Fixes#3936.
Right now we only force a new descriptor upload every 18 hours.
This can make servers become unlisted if they upload a descriptor at
time T which the authorities reject as being "too similar" to one
they uploaded before. Nothing will actually make the server upload a
new descriptor later on, until another 18 hours have passed.
This patch changes the upload behavior so that the 18 hour interval
applies only when we're listed in a live consensus with a descriptor
published within the last 18 hours. Otherwise--if we're not listed
in the live consensus, or if we're listed with a publication time
over 18 hours in the past--we upload a new descriptor every 90
minutes.
This is an attempted bugfix for #3327. If we merge it, it should
obsolete #535.
Conflicts:
src/or/connection.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/dnsserv.c
Some of these were a little tricky, since they touched code that
changed because of the prop171 fixes.
Add a "default" state which we use until we've decided whether we're
live or hibernating. This allows us to properly track whether we're
resuming a hibernation period or not. Fixes bug 2003.
For printf, %f and %lf are synonymous, since floats are promoted to
doubles when passed as varargs. It's only for scanf that we need to
say "%lf" for doubles and "%f" for floats.
Apparenly, some older compilers think it's naughty to say %lf and like
to spew warnings about it.
Found by grarpamp.
For bufferevents, we had all of connection_buckets_decrement() stubbed
out. But that's not actually right! The rephist_* parts were
essential for, inter alia, recording our own bandwidth. This patch
splits out the rephist parts of connection_buckets_decrement() into their
own function, and makes the bufferevent code call that new function.
Fixes bug 3803, and probably 3824 and 3826 too. Bugfix on 0.2.3.1-alpha.
Previously, if you were set up to use microdescriptors, and you
weren't a cache, you'd never fetch router descriptors (except for
bridges). Now FetchUselessDescriptors causes descriptors and
mirodescs to get cached. Also, FetchUselessDescriptors changes the
behavior of "UseMicrodescriptors auto" to be off, since there's no
point in saying "UseMicrodescriptors 1" when you have full descriptors
too.
Fix for bug 3851; bugfix on 0.2.3.1-alpha.
Because tunneled connections are implemented with buffervent_pair,
writing to them can cause an immediate flush. This means that
added to them and then checking to see whether their outbuf is
empty is _not_ an adequate way to see whether you added anything.
This caused a problem in directory server connections, since they
would try spooling a little more data out, and then close the
connection if there was no queued data to send.
This fix should improve matters; it only closes the connection if
there is no more data to spool, and all of the spooling callbacks
are supposed to put the dirconn into dir_spool_none on completion.
This is bug 3814; Sebastian found it; bugfix on 0.2.3.1-alpha.
When we're doing filtering ssl bufferevents, we want the rate-limits
to apply to the lowest level of the bufferevent stack, so that we're
actually limiting bytes sent on the network. Otherwise, we'll read
from the network aggressively, and only limit stuff as we process it.
This behavior is normal when we want more data than the evbuffer
actually has for us. We'll ask for (say) 7 bytes, get only 5
(because that's all there is), try to parse the 5 bytes, and get
told "no, I want 7". One option would be to bail out early whenever
want_length is > buflen, but sometimes we use an over-large
want_length. So instead, let's just remove the warning here: it's
not a bug after all.
