Changes to directory request statistics:
- Rename GEOIP statistics to DIRREQ statistics, because they now include
more than only GeoIP-based statistics, whereas other statistics are
GeoIP-dependent, too.
- Rename output file from geoip-stats to dirreq-stats.
- Add new config option DirReqStatistics that is required to measure
directory request statistics.
- Clean up ChangeLog.
Also ensure that entry guards statistics have access to a local GeoIP
database.
This new option will allow clients to download the newest fresh consensus
much sooner than they normally would do so, even if they previously set
FetchDirInfoEarly. This includes a proper ChangeLog entry and an updated man
page.
Introduce a threshold of 0.01% of bytes that must be read and written per
port in order to be included in the statistics. Otherwise we cannot include
these statistics in extra-info documents, because they are too big.
Change the labels "-written" and "-read" so that the meanings are as
intended.
The internal error "could not find intro key" occurs when we want to send
an INTRODUCE1 cell over a recently finished introduction circuit and think
we built the introduction circuit with a v2 hidden service descriptor, but
cannot find the introduction key in our descriptor.
My first guess how we can end up in this situation is that we are wrong in
thinking that we built the introduction circuit based on a v2 hidden
service descriptor. This patch checks if we have a v0 descriptor, too, and
uses that instead.
o Minor features:
- If we're a relay and we change our IP address, be more verbose
about the reason that made us change. Should help track down
further bugs for relays on dynamic IP addresses.
when we write out our stability info, detect relays that have slipped
through the cracks. log about them and correct the problem.
if we continue to see a lot of these over time, it means there's another
spot where relays fall out of the routerlist without being marked as
unreachable.
Marks the control port connection for flushing before closing when
the QUIT command is issued. This allows a QUIT to be issued during
a long reply over the control port, flushing the reply and then
closing the connection. Fixes bug 1015.
rather than the bandwidth values in each relay descriptor. This approach
opens the door to more accurate bandwidth estimates once the directory
authorities start doing active measurements. Implements more of proposal
141.
arma's rationale: "I think this is a bug, since people intentionally
set DirPortFrontPage, so they really do want their relay to serve that
page when it's asked for. Having it appear only sometimes (or roughly
never in Sebastian's case) makes it way less useful."
Fixes bug 1013; bugfix on 0.2.1.8-alpha.
Added a sanity check in config.c and a check in directory.c
directory_initiate_command_rend() to catch any direct connection attempts
when a socks proxy is configured.
The rest of the code was only including event.h so that it could see
EV_READ and EV_WRITE, which we were using as part of the
connection_watch_events interface for no very good reason.
This patch adds a new compat_libevent.[ch] set of files, and moves our
Libevent compatibility and utilitity functions there. We build them
into a separate .a so that nothing else in src/commmon depends on
Libevent (partially fixing bug 507).
Also, do not use our own built-in evdns copy when we have Libevent
2.0, whose evdns is finally good enough (thus fixing Bug 920).
Fix an edge case where a malicious exit relay could convince a
controller that the client's DNS question resolves to an internal IP
address. Bug found and fixed by "optimist"; bugfix on 0.1.2.8-beta.
Fix an edge case where a malicious exit relay could convince a
controller that the client's DNS question resolves to an internal IP
address. Bug found and fixed by "optimist"; bugfix on 0.1.2.8-beta.
Hidden service clients didn't use a cached service descriptor that
was older than 15 minutes, but wouldn't fetch a new one either. Now,
use a cached descriptor no matter how old it is and only fetch a new
one when all introduction points fail. Fix for bug 997. Patch from
Marcus Griep.
Apparently all the stuff that does a linear scan over all the DNS
cache entries can get really expensive when your DNS cache is very
large. It's hard to say how much this will help performance, since
gprof doesn't count time spent in OpenSSL or zlib, but I'd guess 10%.
Also, this patch removes calls to assert_connection_ok() from inside
the read and write callbacks, which are similarly unneeded, and a
little costlier than I'm happy with.
This is probably worth backporting to 0.2.0.
Provide a useful warning when launch_circuit tries to make us use a
node we don't want to use. Just give an info message when this is a
normal and okay situation. Fix for logging issues in bug 984.
This patch adds a function to determine whether we're in the main
thread, and changes control_event_logmsg() to return immediately if
we're in a subthread. This is necessary because otherwise we will
call connection_write_to_buf, which modifies non-locked data
structures.
Bugfix on 0.2.0.x; fix for at least one of the things currently
called "bug 977".
Tas (thanks!) noticed that when *ListenAddress is set, Tor would
still warn on startup when *Port is low and hibernation is active.
The patch parses all the *ListenAddress lines, and checks the
ports. Bugfix on 0.2.1.15-rc
With the last fix of task 932 (5f03d6c), client requests are only added to
the history when they happen after the start of the current history. This
conflicts with the unit tests that insert current requests first (defining
the start of the client request history) followed by requests in the past.
The fix is to insert requests in chronological order in the unit tests.
- Write geoip stats to disk every 24 hours, not every hour.
- Remove configuration options and define reasonable defaults.
- Clear history of client requests every 24 hours (which wasn't done at
all before).
Specifically if you send SIGUSR1, it will add two lines to the log file:
May 22 07:41:59.576 [notice] Our DNS cache has 3364 entries.
May 22 07:41:59.576 [notice] Our DNS cache size is approximately 1022656
bytes.
[tweaked a bit by nickm]
Really, our idiocy was that we were calling event_set() on the same
event more than once, which sometimes led to us calling event_set() on
an event that was already inserted, thus making it look uninserted.
With this patch, we just initialize the timeout events when we create
the requests and nameservers, and we don't need to worry about
double-add and double-del cases at all.
If we ever add an event, then set it, then add it again, there will be
now two pointers to the event in the event base. If we delete one and
free it, the first pointer will still be there, and possibly cause a
crash later.
This patch adds detection for this case to the code paths in
eventdns.c, and works around it. If the warning message ever
displays, then a cleverer fix is in order.
{I am not too confident that this *is* the fix, since bug 957 is very
tricky. If it is, it is a bugfix on 0.2.0.}
When we got a descriptor that we (as an authority) rejected as totally
bad, we were freeing it, then using the digest in its RAM to look up its
download status. Caught by arma with valgrind. Bugfix on 0.2.1.9-alpha.
Bridges are not supposed to publish router descriptors to the directory
authorities. It defeats the point of bridges when they are included in the
public relay directory.
This patch puts out a warning and exits when the node is configured as
a bridge and to publish v1, v2, or v3 descriptors at the same time.
Also fixes part of bug 932.
This addresses the first part of bug 918. Users are now warned when
they try to use hibernation in combination with a port below 1024
when they're not on Windows. We don't want to die here, because
people might run Tor as root, use a capabilities system or some
other platform that will allow them to re-attach low ports.
Wording suggested by Marian
(Don't crash immediately if we have leftover chunks to free after
freeing chunks in a buffer freelist; instead log a debugging message
that might help.)
Now, when you call tor --digests, it dumps the SHA1 digest of each
source file that Tor was built with. We support both 'sha1sum' and
'openssl sha1'. If the user is building from a tarball and they
haven't edited anything, they don't need any program that calculates
SHA1. If they _have_ modified a file but they don't have a program to
calculate SHA1, we try to build so we do not output digests.
bytes (aka 20KB/s), to match our documentation. Also update
directory authorities so they always assign the Fast flag to relays
with 20KB/s of capacity. Now people running relays won't suddenly
find themselves not seeing any use, if the network gets faster
on average.
svn:r19305
IP address changes: directory mirrors were mistakenly telling them
their old address if they asked via begin_dir, so they never got
an accurate answer about their new address, so they just vanished
after a day. Should fix bugs 827, 883, and 900 -- but alas, only
after every directory mirror has upgraded.
svn:r19291
ago. This change should significantly improve client performance,
especially once more people upgrade, since relays that have been
a guard for a long time are currently overloaded.
svn:r19287
The directory authorities were refusing v3 consensus votes from
other authorities, since the votes are now 504K. Fixes bug 959;
bugfix on 0.0.2pre17 (where we raised it from 50K to 500K ;).
svn:r19194
When we used smartlist_free to free the list of succesful uploads
because we had succeeded in uploading everywhere, we did not actually
set the successful_uploads field to NULL, so later it would get freed
again in rend_service_descriptor_free. Fix for bug 948; bug
introduced in 0.2.1.6-alpha.
svn:r19073
tor_sscanf() only handles %u and %s for now, which will make it
adequate to replace sscanf() for date/time/IP parsing. We want this
to prevent attackers from constructing weirdly formed descriptors,
cells, addresses, HTTP responses, etc, that validate under some
locales but not others.
svn:r18760
It seems that 64-bit Sparc Solaris demands 64-bit-aligned access to
uint64_t, but does not 64-bit-align the stack-allocated char array we
use for cpuworker tags. So this patch adds a set/get_uint64 pair, and
uses them to access the conn_id field in the tag.
svn:r18743
It turns out that we weren't updating the _ExcludeExitNodesUnion set's
country numbers when we reloaded (or first loaded!) the IP-to-country
file. Spotted by Lark. Bugfix on 0.2.1.6-alpha.
svn:r18575
stream never finished making its connection, it would live
forever in circuit_wait state. Now we close it after SocksTimeout
seconds. Bugfix on 0.1.2.7-alpha; reported by Mike Perry.
svn:r18516
Previously, when we had the chosen_exit set but marked optional, and
we failed because we couldn't find an onion key for it, we'd just give
up on the circuit. But what we really want to do is try again, without
the forced exit node.
Spotted by rovv. Another case of bug 752. I think this might be
unreachable in our current code, but proposal 158 could change that.
svn:r18451
This resolves bug 526, wherein we would crash if the following
events occurred in this order:
A: We're an OR, and one of our nameservers goes down.
B: We launch a probe to it to see if it's up again. (We do this hourly
in steady-state.)
C: Before the probe finishes, we reconfigure our nameservers,
usually because we got a SIGHUP and the resolve.conf file changed.
D: The probe reply comes back, or times out. (There is a five-second
window for this, after B has happens).
IOW, if one of our nameservers is down and our nameserver
configuration has changed, there were 5 seconds per hour where HUPing
the server was unsafe.
Bugfix on 0.1.2.1-alpha. Too obscure to backport.
svn:r18306
This fixes the last known case of bug 891, which could happen if two
hosts, A and B, disagree about how long a circuit has been open,
because of clock drift of some kind. Host A would then mark the
connection as is_bad_for_new_circs when it got too old and open a new
connection. In between when B receives a NETINFO cell on the new
conn, and when B receives a conn cell on the new circuit, the new
circuit will seem worse to B than the old one, and so B will mark it
as is_bad_for_new_circs in the second or third loop of
connection_or_group_set_badness().
Bugfix on 0.1.1.13-alpha. Bug found by rovv.
Not a backport candidate: the bug is too obscure and the fix too tricky.
svn:r18303
