Bridge clients ignore ClientUseIPv6, acting as if it is always 1.
This preserves existing behaviour.
Make ClientPreferIPv6OR/DirPort auto by default:
* Bridge clients prefer IPv6 by default.
* Other clients prefer IPv4 by default.
This preserves existing behaviour.
ClientUseIPv4 0 tells tor to avoid IPv4 client connections.
ClientPreferIPv6DirPort 1 tells tor to prefer IPv6 directory connections.
Refactor policy for IPv4/IPv6 preferences.
Fix a bug where node->ipv6_preferred could become stale if
ClientPreferIPv6ORPort was changed after the consensus was loaded.
Update documentation, existing code, add unit tests.
This will give relay operators the ability of disabling the caching of
directory data. In general, this should not be necessary, but on some
lower-resource systems it may beneficial.
* The option is now KeepBindCapabilities
* We now warn if the user specifically asked for KeepBindCapabilities
and we can't deliver.
* The unit tests are willing to start.
* Fewer unused-variable warnings.
* More documentation, fewer misspellings.
Once tor is downloading a usable consensus, any other connection
attempts are not needed.
Choose a connection to keep, favouring:
* fallback directories over authorities,
* connections initiated earlier over later connections
Close all other connections downloading a consensus.
Prop210: Add attempt-based connection schedules
Existing tor schedules increment the schedule position on failure,
then retry the connection after the scheduled time.
To make multiple simultaneous connections, we need to increment the
schedule position when making each attempt, then retry a (potentially
simultaneous) connection after the scheduled time.
(Also change find_dl_schedule_and_len to find_dl_schedule, as it no
longer takes or returns len.)
Prop210: Add multiple simultaneous consensus downloads for clients
Make connections on TestingClientBootstrapConsensus*DownloadSchedule,
incrementing the schedule each time the client attempts to connect.
Check if the number of downloads is less than
TestingClientBootstrapConsensusMaxInProgressTries before trying any
more connections.
UseDefaultFallbackDirs enables any hard-coded fallback
directory mirrors. Default is 1, set it to 0 to disable fallbacks.
Implements ticket 17576.
Patch by "teor".
Refuse connection requests to private OR addresses unless
ExtendAllowPrivateAddresses is set. Previously, tor would
connect, then refuse to send any cells to a private address.
Fixes bugs 17674 and 8976; bugfix on b7c172c9ec (28 Aug 2012)
Original bug 6710, released in 0.2.3.21-rc and an 0.2.2 maint
release.
Patch by "teor".
The slop testing options are the only spot where we try to enumerate multiple
options on the same line. Changing them to each be on their own line as we do
elsewhere.
When applying changes from proposal 171 Nick renamed SocksPort to SOCKSPort,
and SocksListenAddress to SOCKSListenAddress...
https://gitweb.torproject.org/tor.git/commit/?id=891ccd3cd0690e83f1dc4dde7698c3bd9d7fe98d
However, this didn't change the option itself in tor (it's still SocksPort),
and wasn't even uniform in the man page. Functionally this doesn't matter
(tor's config options are case insensitive) but this is a pretty clear
regression.
When logging to syslog, allow a tag to be added to the syslog identity
("Tor"), i.e. the string prepended to every log message. The tag can be
configured by setting SyslogIdentityTag and defaults to none. Setting
it to "foo" will cause logs to be tagged as "Tor-foo". Closes: #17194.
Update the definition of the private exit policy in the man page
and torrcs. It didn't get merged correctly into the man page, and
it was incomplete in the torrcs. (Unfortunately, we only reject the
primary configured IPv4 and IPv6 addresses, not all configured IPv4
and IPv6 addresses.)
Also fixup msn page formatting errors from changes in tickets 16069
and 17027, mainly unescaped *s.
Advise users how to configure separate IPv4 and IPv6 exit
policies in the manpage and sample torrcs.
Related to fixes in ticket #16069 and #17027. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
src/test/test_policy.c:
Merged calls to policies_parse_exit_policy by adding additional arguments.
fixup to remaining instance of ~EXIT_POLICY_IPV6_ENABLED.
Compacting logic test now produces previous list length of 4, corrected this.
src/config/torrc.sample.in:
src/config/torrc.minimal.in-staging:
Merged torrc modification dates in favour of latest.
ExitPolicyRejectPrivate now rejects more local addresses by default:
* the relay's published IPv6 address (if any), and
* any publicly routable IPv4 or IPv6 addresses on any local interfaces.
This resolves a security issue for IPv6 Exits and multihomed Exits that
trust connections originating from localhost.
Resolves ticket 17027. Patch by "teor".
Patch on 42b8fb5a15 (11 Nov 2007), released in 0.2.0.11-alpha.
In previous versions of Tor, ExitPolicy accept6/reject6 * produced
policy entries for IPv4 and IPv6 wildcard addresses.
To reduce operator confusion, change accept6/reject6 * to only produce
an IPv6 wildcard address.
Resolves bug #16069.
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
This controls the circuit dirtyness reset behavior added for Tor
Browser's user experience fix (#15482). Unlike previous iterations
of this patch, the tunable actually works, and is documented.
When this is set, and Tor is running as a relay, it will not
generate or load its secret identity key. You can manage the secret
identity key with --keygen. Implements ticket 16944.
"option to prevent guard,exit,hsdir flag assignment"
"A node will never receive the corresponding flag unless
that node is specified in the
TestingDirAuthVote{Exit,Guard,HSDir} list, regardless of
its uptime, bandwidth, exit policy, or DirPort".
Patch modified by "teor": VoteOnHidServDirectoriesV2
is now obsolete, so TestingDirAuthVoteHSDir always
votes on HSDirs.
Closes ticket 14882. Patch by "robgjansen".
Commit message and changes file by "teor"
with quotes from "robgjansen".
Fix an error in the manual page and comments for
TestingDirAuthVoteHSDir, which suggested that a
HSDir required "ORPort connectivity". While this is true,
it is in no way unique to the HSDir flag. Of all the flags,
only HSDirs need a DirPort configured in order for the
authorities to assign that particular flag.
Fixed as part of 14882. Patch by "teor".
Bugfix on 0.2.6.3 (f9d57473e1 on 10 January 2015).
This is a way to specify the amount of introduction points an hidden service
can have. Maximum value is 10 and the default is 3.
Fixes#4862
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When set, this limits the maximum number of simultaneous streams per
rendezvous circuit on the server side of a HS, with further RELAY_BEGIN
cells being silently ignored.
This can be modified via "HiddenServiceMaxStreamsCloseCircuit", which
if set will cause offending rendezvous circuits to be torn down instead.
Addresses part of #16052.
Parse the file just before voting and apply its information to the
provided vote_routerstatus_t. This follows the same logic as when
dirauths parse bwauth files.
This incidentally makes unix SocksSocket support all the same options
as SocksPort.
This patch breaks 'SocksSocket 0'; next will restore it.
Resolves 14254.
TestingDirAuthVoteHSDir ensures that authorities vote the HSDir flag
for the listed relays regardless of uptime or ORPort connectivity.
Respects the value of VoteOnHidServDirectoriesV2.
Partial fix for bug 14067.
If we're not a relay, we ignore it.
If it's set to 1, we obey ExitPolicy.
If it's set to 0, we force ExitPolicy to 'reject *:*'
And if it's set to auto, then we warn the user if they're running an
exit, and tell them how they can stop running an exit if they didn't
mean to do that.
Fixes ticket 10067
This allows hidden services to disable the anti-scanning feature
introduced in 0.2.6.2-alpha. With this option not set, a connection
to an unlisted port closes the circuit. With this option set, only
a RELAY_DONE cell is sent.
Closes ticket #14084.
The two statistics are:
1. number of RELAY cells observed on successfully established
rendezvous circuits; and
2. number of .onion addresses observed as hidden-service
directory.
Both statistics are accumulated over 24 hours, obfuscated by rounding
up to the next multiple of a given number and adding random noise,
and written to local file stats/hidserv-stats.
Notably, no statistics will be gathered on clients or services, but
only on relays.
Authorities are no longer voting on Named, so specifying nodes by
nickname isn't a clever thing to do. (Not that it ever was!) So
remove the documentation that suggests that you should do it.
Additionally, add proper cross-references to our __node__ lists, and
explain about the optional $ before identity digests.
Also, the oxford comma: endorsed by Steven Pinker, my spouse, and my
11th grade English teacher.
Closes 13381.
Add the TestingDirAuthVoteExit option, a list of nodes to vote Exit for,
regardless of their uptime, bandwidth, or exit policy.
TestingTorNetwork must be set for this option to have any effect.
Works around an issue where authorities would take up to 35 minutes to
give nodes the Exit flag in a test network, despite short consensus
intervals. Partially implements ticket 13161.
This implements the meat of #12899. This commit should simply remove the
parts of Tor dirauths used to check whether a relay was supposed to be
named or not, it doesn't yet convert to a new mechanism for
reject/invalid/baddir/badexiting relays.
This is in preparation for a big patch series removing the entire Naming
system from Tor. In its wake, the approved-routers file is being
deprecated, and a replacement option to allow only pre-approved routers
is not being implemented.
When we merged the cookieauthfile creation logic in 33c3e60a37, we
accidentally took out this feature. Fixes bug 12864, bugfix on
0.2.5.1-alpha.
Also adds an ExtORPortCookieAuthFileGroupReadable, since there's no
reason not to.
I don't know whether we missed these or misclassified them when we
first made the "DIRECTORY AUTHORITY SERVER OPTIONS" section, but they
really belong there.
If we can't detect the physical memory, the new default is 8 GB on
64-bit architectures, and 1 GB on 32-bit architectures.
If we *can* detect the physical memory, the new default is
CLAMP(256 MB, phys_mem * 0.75, MAX_DFLT)
where MAX_DFLT is 8 GB on 64-bit architectures and 2 GB on 32-bit
architectures.
You can still override the default by hand. The logic here is simply
trying to choose a lower default value on systems with less than 12 GB
of physical RAM.
This means that tor can run without needing to communicate with ioctls
to the firewall, and therefore doesn't need to run with privileges to
open the /dev/pf device node.
A new TransProxyType is added for this purpose, "pf-divert"; if the user
specifies this TransProxyType in their torrc, then the pf device node is
never opened and the connection destination is determined with getsockname
(as per pf(4)). The default behaviour (ie., when TransProxyType is "default"
when using the pf firewall) is still to assume that pf is configured with
rdr-to rules.
This isn't on by default; to get it, you need to set "TransProxyType
ipfw". (The original patch had automatic detection for whether
/dev/pf is present and openable, but that seems marginally fragile.)
We are searching @CONFDIR@ before $HOME, but the documentation
implied otherwise.
I screwed this up in f5e86bcd6c, when I
first documented the $HOME/.torrc possibility.
Fix for bug 9213; bugfix on 0.2.3.18-rc.
In the end this required a slightly nasty hack using a dummy anchor as
an option heading in order to make the "Other recognized __flags__"
line indent properly.
Fixes bug 11061; Bugfix on 61d740ed.
We have ignored any ports listed here since 80365b989 (0.0.7rc1),
but we didn't warn the user that we were ignoring them. This patch
adds a warning if you put explicit ports in any of the options
{Socks,Dir}Policy or AuthDir{Reject,Invalid,BadDir,BadExit}. It
also adjusts the manpage to say that ports are ignored.
Fixes ticket 11108.
These options were added back in 0.1.2.5-alpha, but no longer make any
sense now that all directories support tunneled connections and
BEGIN_DIR cells. These options were on by default; now they are
always-on.
This is a fix for 10849, where TunnelDirConns 0 would break hidden
services -- and that bug arrived, I think, in 0.2.0.10-alpha.
(There is no longer meaningfully any such thing as a HS authority,
since we stopped uploading or downloading v0 hs descriptors in
0.2.2.1-alpha.)
Implements #10881, and part of #10841.
Explicitly include bridges, and note that we archive and publish all
descriptors.
(We are not yet publishing ContactInfo lines contained in bridge
descriptors, but maybe we'll want to do that soon, so let's err on the
side of caution here.)
Related to #9854.
According to the manpage, bridges use P256 for conformity and relays
use P224 for speed. But skruffy points out that we've gotten it
backwards in the code.
In this patch, we make the default P256 for everybody.
Fixes bug 9780; bugfix on 0.2.4.8-alpha.
For now, round down to the nearest 10 minutes. Later, eliminate entirely by
setting a consensus parameter.
(This rounding is safe because, in 0.2.2, where the timestamp mattered,
REND_REPLAY_TIME_INTERVAL was a nice generous 60 minutes.)
This implements "algorithm 1" from my discussion of bug #9072: on OOM,
find the circuits with the longest queues, and kill them. It's also a
fix for #9063 -- without the side-effects of bug #9072.
The memory bounds aren't perfect here, and you need to be sure to
allow some slack for the rest of Tor's usage.
This isn't a perfect fix; the rest of the solutions I describe on
codeable.
A new option TestingV3AuthVotingStartOffset is added which offsets the
starting time of the voting interval. This is possible only when
TestingTorNetwork is set.
This patch makes run_scheduled_events() check for new consensus
downloads every second when TestingTorNetwork, instead of every
minute. This should be fine, see #8532 for reasoning.
This patch also brings MIN_VOTE_SECONDS and MIN_DIST_SECONDS down from
20 to 2 seconds, unconditionally. This makes sanity checking of
misconfiguration slightly less sane.
Addresses #8532.
- Avoid control_event_refill_global function with 13 arguments and
increase code reuse factor by moving more code from control.c to
connection.c.
- Avoid an unsafe uint32_t -> int cast.
- Add TestingEnableTbEmptyEvent option.
- Prepare functions for testing.
- Rename a few functions and improve documentation.
- Move cell_command_to_string from control.c to command.c.
- Use accessor for global_circuitlist instead of extern.
- Add a struct for cell statistics by command instead of six arrays.
- Split up control_event_circuit_cell_stats by using two helper functions.
- Add TestingEnableCellStatsEvent option.
- Prepare functions for testing.
- Rename a few variables and document a few things better.
Now the manpages no longer refer to tsocks or tsocks.conf, and we no
longer have or ship a tor-tsocks.conf. The only remaining instances
of "tsocks" in our repository are old ChangeLog and ReleaseNotes
entries, and the torify script saying that it doesn't support tsocks.
Fixes bug 8290.
Also, deprecate the torrc options for the scaling values. It's unlikely anyone
but developers will ever tweak them, even if we provided a single ratio value.
Instead of hardcoding the minimum fraction of possible paths to 0.6, we
take it from the user, and failing that from the consensus, and
failing that we fall back to 0.6.
This is ticket 7706, reported by "bugcatcher." The rationale here
is that if somebody says 'ExcludeNodes {tv}', then they probably
don't just want to block definitely Tuvaluan nodes: they also want
to block nodes that have unknown country, since for all they know
such nodes are also in Tuvalu.
This behavior is controlled by a new GeoIPExcludeUnknown autobool
option. With the default (auto) setting, we exclude ?? and A1 if
any country is excluded. If the option is 1, we add ?? and A1
unconditionally; if the option is 0, we never add them.
(Right now our geoip file doesn't actually seem to include A1: I'm
including it here in case it comes back.)
This feature only takes effect if you have a GeoIP file. Otherwise
you'd be excluding every node.
The right way to set "MaxOnionsPending" was to adjust it until the
processing delay was appropriate. So instead, let's measure how long
it takes to process onionskins (sampling them once we have a big
number), and then limit the queue based on its expected time to
finish.
This change is extra-necessary for ntor, since there is no longer a
reasonable way to set MaxOnionsPending without knowing what mix of
onionskins you'll get.
This patch also reserves 1/3 of the onionskin spots for ntor
handshakes, on the theory that TAP handshakes shouldn't be allowed to
starve their speedier cousins. We can change this later if need be.
Resolves 7291.
With an IPv6 virtual address map, we can basically hand out a new
IPv6 address for _every_ address we connect to. That'll be cool, and
will let us maybe get around prop205 issues.
This uses some fancy logic to try to make the code paths in the ipv4
and the ipv6 case as close as possible, and moves to randomly
generated addresses so we don't need to maintain those stupid counters
that will collide if Tor restarts but apps don't.
Also has some XXXX items to fix to make this useful. More design
needed.
