base16_decodes() now returns the number of decoded bytes. It's interface
changes from returning a "int" to a "ssize_t". Every callsite now checks the
returned value.
Fixes#14013
Signed-off-by: David Goulet <dgoulet@torproject.org>
So, back long ago, XXX012 meant, "before Tor 0.1.2 is released, we
had better revisit this comment and fix it!"
But we have a huge pile of such comments accumulated for a large
number of released versions! Not cool.
So, here's what I tried to do:
* 0.2.9 and 0.2.8 are retained, since those are not yet released.
* XXX+ or XXX++ or XXX++++ or whatever means, "This one looks
quite important!"
* The others, after one-by-one examination, are downgraded to
plain old XXX. Which doesn't mean they aren't a problem -- just
that they cannot possibly be a release-blocking problem.
When we connect to a hidden service as a client we may need three internal
circuits, one for the descriptor retrieval, introduction, and rendezvous.
Let's try to make sure we have them. Closes#13239.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Modify callers to correctly handle these new NULL returns:
* fix assert in onion_extend_cpath
* warn and discard circuit in circuit_get_open_circ_or_launch
* warn, discard circuit, and tell controller in handle_control_extendcircuit
Now we only re-scan the list in the cases we did before: when we
have a new circuit that we should try attaching to, or when we have
added a new stream that we haven't tried to attach yet.
This is part of 17590.
Long ago we used to call connection_ap_handshake_attach_circuit()
only in a few places, since connection_ap_attach_pending() attaches
all the pending connections, and does so regularly. But this turned
out to have a performance problem: it would introduce a delay to
launching or connecting a stream.
We couldn't just call connection_ap_attach_pending() every time we
make a new connection, since it walks the whole connection list. So
we started calling connection_ap_attach_pending all over, instead!
But that's kind of ugly and messes up our callgraph.
So instead, we now have connection_ap_attach_pending() use a list
only of the pending connections, so we can call it much more
frequently. We have a separate function to scan the whole
connection array to see if we missed adding anything, and log a
warning if so.
Closes ticket #17590
This controls the circuit dirtyness reset behavior added for Tor
Browser's user experience fix (#15482). Unlike previous iterations
of this patch, the tunable actually works, and is documented.
Only applies to connections with SOCKS auth set, so that non-web Tor
activity is not affected.
Simpler version of Nick's patch because the randomness worried me, and I'm not
otherwise sure why we want a max here.
When we ran out of intro points for a hidden service (which could
happen on a newnym), we would change the connection's state back to
"waiting for hidden service descriptor." But this would make an
assertion fail if we went on to call circuit_get_open_circ_or_launch
again.
This fixes bug 16013; I believe the bug was introduced in
38be533c69, where we made it possible for
circuit_get_open_circ_or_launch() to change the connection's state.
When set, this limits the maximum number of simultaneous streams per
rendezvous circuit on the server side of a HS, with further RELAY_BEGIN
cells being silently ignored.
This can be modified via "HiddenServiceMaxStreamsCloseCircuit", which
if set will cause offending rendezvous circuits to be torn down instead.
Addresses part of #16052.
Stop using an onion address since it's not indexed with that anymore in the
last hid serv request cache. Instead use a base32 encoded descriptor ID
contained in the rend_data_t object.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Tor can now build circuits from a consensus with no exits.
But if it tries to build exit circuits, they fail and flood the logs.
The circuit types in the Exit Circuits list below will only be
built if the current consensus has exits. If it doesn't,
only the Internal Circuits will be built. (This can change
with each new consensus.)
Fixes bug #13814, causes fewer path failures due to #13817.
Exit Circuits:
Predicted Exit Circuits
User Traffic Circuits
Most AP Streams
Circuits Marked Exit
Build Timeout Circuits (with exits)
Internal Circuits:
Hidden Service Server Circuits
Hidden Service Client Circuits
Hidden Service AP Streams
Hidden Service Intro Point Streams
Circuits Marked Internal
Build Timeout Circuits (with no exits)
Other Circuits?
In circuit_get_open_circ_or_launch(), for a rendezvous circuit,
rend_client_rendcirc_has_opened() but circuit_has_opened() is preferred here
since it will call the right function for a specific circuit purpose.
Furthermore, a controller event is triggered where the former did not.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Allow clients to use optimistic data when connecting to a hidden service,
which should cut out the initial round-trip for client-side programs
including Tor Browser.
(Now that Tor 0.2.2.x is obsolete, all hidden services should support
server-side optimistic data.)
See proposal 181 for details. Implements ticket 13211.
Clients are now willing to send optimistic circuit data (before they
receive a 'connected' cell) to relays of any version. We used to
only do it for relays running 0.2.3.1-alpha or later, but now all
relays are new enough.
Resolves ticket 13153.
When we run into bug 8387 (if we run into it again), report when we
last called circuit_expire_old_circuits_clientside(). This will let
us know -- if my fix for 8387 doesn't work -- whether my diagnosis
was at least correct.
Suggested by Andrea.
When we find a stranded one-hop circuit, log whether it is dirty,
log information about any streams on it, and log information about
connections they might be linked to.
On OpenBSD 5.4, time_t is a 32-bit integer. These instances contain
implicit treatment of long and time_t as comparable types, so explicitly
cast to time_t.
Throughout circuituse, when we log about a circuit, we log its
desired path length from build_state. scan-build is irrationally
concerned that build_state might be NULL.
When I introduced the unusable_for_new_circuits flag in
62fb209d83, I had a spurious ! in the
circuit_stream_is_being_handled loop. This made us decide that
non-unusable circuits (that is, usable ones) were the ones to avoid,
and caused it to launch a bunch of extra circuits.
Fixes bug 10456; bugfix on 0.2.4.12-alpha.
Roger spotted this on tor-dev in his comments on proposal 221.
We etect DESTROY vs everything else, since arma likes network
timeout indicating failure but not overload indicating failure.
This would make us do testing circuits "even when cbt is disabled by
consensus, or when we're a directory authority, or when we've failed
to write cbt history to our state file lately." (Roger's words.)
This is a fix for 9671 and an improvement in our fix for 5049.
The original misbehavior was in 0.2.2.14-alpha; the incomplete
fix was in 0.2.3.17-beta.
Also, don't call the exit node 'reject *' unless our decision to pick
that node was based on a non-summarized version of that node's exit
policy.
rransom and arma came up with the ideas for this fix.
Fix for 7582; the summary-related part is a bugfix on 0.2.3.2-alpha.
Now that circid_t is 4 bytes long, the default integer promotions will
leave it alone when sizeof(int) == 4, which will leave us formatting an
unsigned as an int. That's technically undefined behavior.
Fixes bug 8447 on bfffc1f0fc. Bug not
in any released Tor.
In a number of places, we decrement timestamp_dirty by
MaxCircuitDirtiness in order to mark a stream as "unusable for any
new connections.
This pattern sucks for a few reasons:
* It is nonobvious.
* It is error-prone: decrementing 0 can be a bad choice indeed.
* It really wants to have a function.
It can also introduce bugs if the system time jumps backwards, or if
MaxCircuitDirtiness is increased.
So in this patch, I add an unusable_for_new_conns flag to
origin_circuit_t, make it get checked everywhere it should (I looked
for things that tested timestamp_dirty), and add a new function to
frob it.
For now, the new function does still frob timestamp_dirty (after
checking for underflow and whatnot), in case I missed any cases that
should be checking unusable_for_new_conns.
Fixes bug 6174. We first used this pattern in 516ef41ac1,
which I think was in 0.0.2pre26 (but it could have been 0.0.2pre27).
Since they use RELAY_EARLY (which can be seen by all hops on the path),
it's not safe to say they actually count as a successful use.
There are also problems with trying to allow them to finish extending due to
the circuit purpose state machine logic. It is way less complicated (and
possibly more semantically coherent) to simply wait until we actually try to
do something with them before claiming we 'used' them.
Also, we shouldn't call timed out circuits 'used' either, for semantic
consistency.
Path use bias measures how often we can actually succeed using the circuits we
actually try to use. It is a subset of path bias accounting, but it is
computed as a separate statistic because the rate of client circuit use may
vary depending on use case.
This is an automatically generated commit, from the following perl script,
run with the options "-w -i -p".
s/smartlist_string_num_isin/smartlist_contains_int_as_string/g;
s/smartlist_string_isin((?:_case)?)/smartlist_contains_string$1/g;
s/smartlist_digest_isin/smartlist_contains_digest/g;
s/smartlist_isin/smartlist_contains/g;
s/digestset_isin/digestset_contains/g;
In general, if we tried to use a circ for a stream, but then decided to place
that stream on a different circuit, we need to probe the original circuit
before deciding it was a "success".
We also need to do the same for cannibalized circuits that go unused.
