If you want a slow shutdown, send SIGNAL SHUTDOWN.
(Why not just have the default be SIGNAL QUIT? Because this case
should only happen when an owning controller has crashed, and a
crashed controller won't be able to give the user any "tor is
shutting down" feedback, and so the user gets confused for a while.
See bug 10449 for more info)
I'm doing this because:
* User doesn't mean you're running as root, and running as root
doesn't mean you've set User.
* It's possible that the user has done some other
capability-based hack to retain the necessary privileges.
The remaining vestige is that we continue to publish the V2dir flag,
and that, for the controller, we continue to emit v2 directory
formats when requested.
Previously, we would sometimes decide in directory_get_from_hs_dir()
to connect to an excluded node, and then later in
directory_initiate_command_routerstatus_rend() notice that it was
excluded and strictnodes was set, and catch it as a stopgap.
Additionally, this patch preferentially tries to fetch from
non-excluded nodes even when StrictNodes is off.
Fix for bug #10722. Bugfix on 0.2.0.10-alpha (the v2 hidserv directory
system was introduced in e136f00ca). Reported by "mr-4".
If we don't, we can wind up with a wedged cpuworker, and write to it
for ages and ages.
Found by skruffy. This was a bug in 2dda97e8fd, a.k.a. svn
revision 402. It's been there since we have been using cpuworkers.
When I introduced the unusable_for_new_circuits flag in
62fb209d83, I had a spurious ! in the
circuit_stream_is_being_handled loop. This made us decide that
non-unusable circuits (that is, usable ones) were the ones to avoid,
and caused it to launch a bunch of extra circuits.
Fixes bug 10456; bugfix on 0.2.4.12-alpha.
When we wrote the directory request statistics code in August 2009, we
thought that these statistics were only relevant for bridges, and that
bridges should not report them. That's why we added a switch to discard
relevant observations made by bridges. This code was first released in
0.2.2.1-alpha.
In May 2012 we learned that we didn't fully disable directory request
statistics on bridges. Bridges did report directory request statistics,
but these statistics contained empty dirreq-v3-ips and dirreq-v3-reqs
lines. But the remaining dirreq-* lines have always been non-empty. (We
didn't notice for almost three years, because directory-request statistics
were disabled by default until 0.2.3.1-alpha, and all statistics have been
removed from bridge descriptors before publishing them on the metrics
website.)
Proposal 201, created in May 2012, suggests to add a new line called
bridge-v3-reqs that is similar to dirreq-v3-reqs, but that is published
only by bridges. This proposal is still open as of December 2013.
Since October 2012 we're using dirreq-v3-resp (not -reqs) lines in
combination with bridge-ips lines to estimate bridge user numbers; see
task 8462. This estimation method has superseded the older approach that
was only based on bridge-ips lines in November 2013. Using dirreq-v3-resp
and bridge-ips lines is a workaround. The cleaner approach would be to
use dirreq-v3-reqs instead.
This commit makes bridges report the same directory request statistics as
relays, including dirreq-v3-ips and dirreq-v3-reqs lines. It makes
proposal 201 obsolete.
In 0.2.3.8-alpha we attempted to "completely disable stats if we aren't
running as a relay", but instead disabled them only if we aren't running
as a server.
This commit leaves DirReqStatistics enabled on both relays and bridges,
and disables (Cell,Entry,ExitPort)Statistics on bridges.
The 'body' field of a microdesc_t holds a strdup()'d value if the
microdesc's saved_location field is SAVED_IN_JOURNAL or
SAVED_NOWHERE, and holds a pointer to the middle of an mmap if the
microdesc is SAVED_IN_CACHE. But we weren't setting that field
until a while after we parsed the microdescriptor, which left an
interval where microdesc_free() would try to free() the middle of
the mmap().
This patch also includes a regression test.
This is a fix for #10409; bugfix on 0.2.2.6-alpha.
The old behavior was that NULL matched only bridges without known
identities; the correct behavior is that NULL should match all
bridges (assuming that their addr:port matches).
We were checking whether a 8-bit length field had overflowed a
503-byte buffer. Unless somebody has found a way to store "504" in a
single byte, it seems unlikely.
Fix for 10313 and 9980. Based on a pach by Jared L Wong. First found
by David Fifield with STACK.
It's conceivable (but probably impossible given our code) that lseek
could return -1 on an error; when that happens, we don't want off to
become -1.
Fixes CID 1035124.
This was a mistake in the merge commit 7a2b30fe16. It
would have made the CellStatistics code give completely bogus
results. Bug not in any released Tor.
We had accidentially grown two fake ones: one for backtrace.c, and one
for sandbox.c. Let's do this properly instead.
Now, when we configure logs, we keep track of fds that should get told
about bad stuff happening from signal handlers. There's another entry
point for these that avoids using non-signal-handler-safe functions.
On platforms with the backtrace/backtrace_symbols_fd interface, Tor
can now dump stack traces on assertion failure. By default, I log
them to DataDir/stack_dump and to stderr.
Conflicts:
src/or/or.h
src/or/relay.c
Conflicts were simple to resolve. More fixes were needed for
compilation, including: reinstating the tv_to_msec function, and renaming
*_conn_cells to *_chan_cells.
In proposal 157, we added a cross-certification element for
directory authority certificates. We implemented it in
0.2.1.9-alpha. All Tor directory authorities now generate it.
Here, as planned, make it required, so that we can finally close
proposal 157.
The biggest change in the code is in the unit test data, where some
old hardcoded certs that we made long ago have become no longer
valid and now need to be replaced.
Previously, when we ran low on memory, we'd close whichever circuits
had the most queued cells. Now, we close those that have the
*oldest* queued cells, on the theory that those are most responsible
for us running low on memory, and that those are the least likely to
actually drain on their own if we wait a little longer.
Based on analysis from a forthcoming paper by Jansen, Tschorsch,
Johnson, and Scheuermann. Fixes bug 9093.
Roger spotted this on tor-dev in his comments on proposal 221.
We etect DESTROY vs everything else, since arma likes network
timeout indicating failure but not overload indicating failure.
Don't cast uint64_t * to const uint64_t * explicitly. The cast is always
safe, so C does it for us. Doing the cast explitictly can hide bugs if
the input is secretly the wrong type.
Suggested by Nick.
As a bridge authority, before we create our networkstatus document, we
should compute the thresholds needed for the various status flags
assigned to each bridge based on the status of all other bridges. We
then add these thresholds to the networkstatus document for easy access.
Fixes for #1117 and #9859.
Also fix a bug where if the guard we choose first doesn't answer, we
would try the second guard, but once we connected to the second guard
we would abandon it and retry the first one, slowing down bootstrapping.
The fix in both cases is to treat all our initially chosen guards as
acceptable to use.
Fixes bug 9946.
We had updated our "do we have enough microdescs to begin building
circuits?" logic most recently in 0.2.4.10-alpha (see bug 5956), but we
left the bootstrap status event logic at "how far through getting 1/4
of them are we?"
Fixes bug 9958; bugfix on 0.2.2.36, which is where they diverged (see
bug 5343).
The old code had logic to use a shorter path length if we didn't
have enough nodes. But we don't support 2-node networks anwyay.
Fix for #9926. I'm not calling this a bugfix on any particular
version, since a 2-node network would fail to work for you for a lot
of other reasons too, and it's not clear to me when that began, or if
2-node networks would ever have worked.
By calling circuit_n_chan_done() unconditionally on close, we were
closing pending connections that might not have been pending quite for
the connection we were closing. Fix for bug 9880.
Thanks to skruffy for finding this and explaining it patiently until
we understood.
this was causing directory authorities to send a time of 0 on all
connections they generated themselves, which means everybody reachability
test caused a time skew warning in the log for that relay.
(i didn't just revert, because the changes file has been modified by
other later commits.)
This isn't actually much of an issue, since only relays send
AUTHENTICATE cells, but while we're removing timestamps, we might as
well do this too.
Part of proposal 222. I didn't take the approach in the proposal of
using a time-based HMAC, since that was a bad-prng-mitigation hack
from SSL3, and in real life, if you don't have a good RNG, you're
hopeless as a Tor server.
For now, round down to the nearest 10 minutes. Later, eliminate entirely by
setting a consensus parameter.
(This rounding is safe because, in 0.2.2, where the timestamp mattered,
REND_REPLAY_TIME_INTERVAL was a nice generous 60 minutes.)
We were freeing these on exit, but when we added the dl_status_map
field to them in fddb814f, we forgot to arrange for it to be freed.
I've moved the cert_list_free() code into its own function, and added
an appropriate dsmap_free() call.
Fixes bug 9644; bugfix on 0.2.4.13-alpha.
The problem was that the server_identity_key_is_set() function could
return true under conditions where we don't really have an identity
key -- specifically, where we used to have one, but we stopped being a
server.
This is a fix for 6979; bugfix on 0.2.2.18-alpha where we added that
assertion to get_server_identity_key().
Whenever we had an non-option commandline arguments *and*
option-bearing commandline arguments on the commandline, we would save
only the latter across invocations of options_init_from_torrc, but
take their existence as license not to re-parse the former. Yuck!
Incidentally, this fix lets us throw away the backup_arg[gv] logic.
Fix for bug 9746; bugfix on d98dfb3746,
not in any released Tor. Found by Damian. Thanks, Damian!
This just goes to show: never cast a function pointer. Found while
testing new command line parse logic.
Bugfix on 1293835440, which implemented
6752: Not in any released tor.
Fall back to SOMAXCONN if INT_MAX doesn't work.
We'd like to do this because the actual maximum is overrideable by the
kernel, and the value in the header file might not be right at all.
All implementations I can find out about claim that this is supported.
Fix for 9716; bugfix on every Tor.
Now we explicitly check for overflow.
This approach seemed smarter than a cascade of "change int to unsigned
int and hope nothing breaks right before the release".
Nick, feel free to fix in a better way, maybe in master.
This would make us do testing circuits "even when cbt is disabled by
consensus, or when we're a directory authority, or when we've failed
to write cbt history to our state file lately." (Roger's words.)
This is a fix for 9671 and an improvement in our fix for 5049.
The original misbehavior was in 0.2.2.14-alpha; the incomplete
fix was in 0.2.3.17-beta.
(In practice they don't exist, but so long as we're making changes for
standards compliance...)
Also add several more unit tests for good and bad URL types.
There were only two functions outside of circuitstats that actually
wanted to know what was inside this. Making the structure itself
hidden should help isolation and prevent us from spaghettifying the
thing more.
The spec requires them to do so, and not doing so creates a situation
where they can't send-test because relays won't extend to them because
of the other part of bug 9546.
Fixes bug 9546; bugfix on 0.2.3.6-alpha.
The spec requires them to do so, and not doing so creates a situation
where they can't send-test because relays won't extend to them because
of the other part of bug 9546.
Fixes bug 9546; bugfix on 0.2.3.6-alpha.
(Backport to Tor 0.2.3)
Relays previously, when initiating a connection, would only send a
NETINFO after sending an AUTHENTICATE. But bridges, when receiving a
connection, would never send AUTH_CHALLENGE. So relays wouldn't
AUTHENTICATE, and wouldn't NETINFO, and then bridges would be
surprised to be receiving CREATE cells on a non-open circuit.
Fixes bug 9546.
Relays previously, when initiating a connection, would only send a
NETINFO after sending an AUTHENTICATE. But bridges, when receiving a
connection, would never send AUTH_CHALLENGE. So relays wouldn't
AUTHENTICATE, and wouldn't NETINFO, and then bridges would be
surprised to be receiving CREATE cells on a non-open circuit.
Fixes bug 9546.
Use the generic function for both the ControlPort cookie and the
ExtORPort cookie.
Also, place the global cookie variables in the heap so that we can
pass them around more easily as pointers.
Also also, fix the unit tests that broke by this change.
Conflicts:
src/or/config.h
src/or/ext_orport.c
memwipe some stack-allocated stuff
Add DOCDOC comments for state machines
Use memdup_nulterm as appropriate
Check for NULs in useraddr
Add a macro so that <= AUTH_MAX has a meaning.
- Don't leak if a transport proxy sends us a TRANSPORT command more
than once.
- Don't use smartlist_string_isin() in geoip_get_transport_history().
(pointed out by Nick)
- Use the 'join' argument of smartlist_join_strings() instead of
trying to write the separator on our own.
(pointed out by Nick)
- Document 'ext_or_transport' a bit better.
(pointed out by Nick)
- Be a bit more consistent with the types of the values of 'transport_counts'.
(pointed out by Nick)
Fortunately, later checks mean that uninitialized data can't get sent
to the network by this bug. Unfortunately, reading uninitialized heap
*can* (in some cases, with some allocators) cause a crash if you get
unlucky and go off the end of a page.
Found by asn. Bugfix on 0.2.4.1-alpha.
Both 'managed_proxy_list' and 'unconfigured_proxies_n' are global
src/or/transports.c variables that are not initialized properly when
unit tests are run.
When we moved channel_matches_target_addr_for_extend() into a separate
function, its sense was inverted from what one might expect, and we
didn't have a ! in one place where we should have.
Found by skruffy.
When we moved channel_matches_target_addr_for_extend() into a separate
function, its sense was inverted from what one might expect, and we
didn't have a ! in one place where we should have.
Found by skruffy.
I added this so I could write a unit test for ServerTransportOptions,
but it incidentally exercises the succeed-on-defaults case of
options_validate too.
Previously we would accept relative paths, but only if they contained a
slash somewhere (not at the end).
Otherwise we would silently not work. Closes: #9258. Bugfix on
0.2.3.16-alpha.
If you pass the --enable-coverage flag on the command line, we build
our testing binaries with appropriate options eo enable coverage
testing. We also build a "tor-cov" binary that has coverage enabled,
for integration tests.
On recent OSX versions, test coverage only works with clang, not gcc.
So we warn about that.
Also add a contrib/coverage script to actually run gcov with the
appropriate options to generate useful .gcov files. (Thanks to
automake, the .o files will not have the names that gcov expects to
find.)
Also, remove generated gcda and gcno files on clean.
We previously used FILENAME_PRIVATE identifiers mostly for
identifiers exposed only to the unit tests... but also for
identifiers exposed to the benchmarker, and sometimes for
identifiers exposed to a similar module, and occasionally for no
really good reason at all.
Now, we use FILENAME_PRIVATE identifiers for identifiers shared by
Tor and the unit tests. They should be defined static when we
aren't building the unit test, and globally visible otherwise. (The
STATIC macro will keep us honest here.)
For identifiers used only by the unit tests and never by Tor at all,
on the other hand, we wrap them in #ifdef TOR_UNIT_TESTS.
This is not the motivating use case for the split test/non-test
build system; it's just a test example to see how it works, and to
take a chance to clean up the code a little.
This is mainly a matter of automake trickery: we build each static
library in two versions now: one with the TOR_UNIT_TESTS macro
defined, and one without. When TOR_UNIT_TESTS is defined, we can
enable mocking and expose more functions. When it's not defined, we
can lock the binary down more.
The alternatives would be to have alternate build modes: a "testing
configuration" for building the libraries with test support, and a
"production configuration" for building them without. I don't favor
that approach, since I think it would mean more people runnning
binaries build for testing, or more people not running unit tests.
Fix a bug in the voting algorithm that could yield incorrect results
when a non-naming authority declared too many flags. Fixes bug 9200;
bugfix on 0.2.0.3-alpha.
Found by coverity scan.
This implements "algorithm 1" from my discussion of bug #9072: on OOM,
find the circuits with the longest queues, and kill them. It's also a
fix for #9063 -- without the side-effects of bug #9072.
The memory bounds aren't perfect here, and you need to be sure to
allow some slack for the rest of Tor's usage.
This isn't a perfect fix; the rest of the solutions I describe on
codeable.
In my #7912 fix, there wasn't any code to remove entries from the
(channel, circuit ID)->circuit map corresponding to queued but un-sent
DESTROYs.
Spotted by skruffy. Fixes bug 9082; bug not in any released Tor.
I added the code to pass a destroy cell to a queueing function rather
than writing it immediately, and the code to remember that we
shouldn't reuse the circuit id until the destroy is actually sent, and
the code to release the circuit id once the destroy has been sent...
and then I finished by hooking destroy_cell_queue into the rest of
Tor.
This is a reprise of the fix in bdff7e3299d78; 6905c1f6 reintroduced
that bug. Briefly: windows doesn't seem to like deleting a mapped
file. I tried adding the PROT_SHARED_DELETE flag to the createfile
all, but that didn't actually fix this issue. Fortunately, the unit
test I added in 4f4fc63fea should
prevent us from making this particular screw-up again.
This patch also tries to limit the crash potential of a failure to
write by a little bit, although it could do a better job of retaining
microdescriptor bodies.
Fix for bug 8822, bugfix on 0.2.4.12-alpha.
There's an assertion failure that can occur if a connection has
optimistic data waiting, and then the connect() call returns 0 on the
first attempt (rather than -1 and EINPROGRESS). That latter behavior
from connect() appears to be an (Open?)BSDism when dealing with remote
addresses in some cases. (At least, I've only seen it reported with
the BSDs under libevent, even when the address was 127.0.0.1. And
we've only seen this problem in Tor with OpenBSD.)
Fixes bug 9017; bugfix on 0.2.3.1-alpha, which first introduced
optimistic data. (Although you could also argue that the commented-out
connection_start_writing in 155c9b80 back in 2002 is the real source
of the issue.)
A new option TestingV3AuthVotingStartOffset is added which offsets the
starting time of the voting interval. This is possible only when
TestingTorNetwork is set.
This patch makes run_scheduled_events() check for new consensus
downloads every second when TestingTorNetwork, instead of every
minute. This should be fine, see #8532 for reasoning.
This patch also brings MIN_VOTE_SECONDS and MIN_DIST_SECONDS down from
20 to 2 seconds, unconditionally. This makes sanity checking of
misconfiguration slightly less sane.
Addresses #8532.
You can't use != to compare arbitary members of or_options_t.
(Also, generate a better error message to say which Testing* option
was set.)
Fix for bug 8992. Bugfix on b0d4ca49. Bug not in any released Tor.
- Rename n_read and n_written in origin_circuit_t to make it clear that
these are only used for CIRC_BW events.
- Extract new code in control_update_global_event_mask to new
clear_circ_bw_fields function.
- Avoid control_event_refill_global function with 13 arguments and
increase code reuse factor by moving more code from control.c to
connection.c.
- Avoid an unsafe uint32_t -> int cast.
- Add TestingEnableTbEmptyEvent option.
- Prepare functions for testing.
- Rename a few functions and improve documentation.
- Move cell_command_to_string from control.c to command.c.
- Use accessor for global_circuitlist instead of extern.
- Add a struct for cell statistics by command instead of six arrays.
- Split up control_event_circuit_cell_stats by using two helper functions.
- Add TestingEnableCellStatsEvent option.
- Prepare functions for testing.
- Rename a few variables and document a few things better.
- Move new ID= parameter in ORCONN event to end. Avoids possible trouble
from controllers that parse parameters by position, even though they
shouldn't.
Create new methods check_or_create_data_subdir() and
write_to_data_subdir() in config.c and use them throughout
rephist.c and geoip.c.
This should solve ticket #4282.
