Previously, "--list-fingerprint --quiet" was an error. Now, the
handler for optional arguments to "--list-fingerprint" can tell that
"--quiet" is a flag, not an argument.
This only affects flags that take an _optional_ argument, so you can
still put your torrc file in a location starting with "-".
Closes#40223.
The "-static" compile flag was set globally which means that all autoconf test
were attempting to be built statically and lead to failures of detecting
OpenSSL libraries and others.
This commit adds this flag only to the "tor" binary build.
There is also a fix on where to find libevent.a since it is using libtool, it
is in .libs/.
At this commit, there are still warnings being emitted that informs the user
that the built binary must still be linked dynamically with glibc.
Fixes#40111
Signed-off-by: David Goulet <dgoulet@torproject.org>
When sending the stream level SENDME, it is possible the cirucit was marked
for close or any other failures that can occur. These events can occur
naturally.
Fixes#40142
Signed-off-by: David Goulet <dgoulet@torproject.org>
The function in charge of removing duplicate ORPorts from our configured ports
was skipping all non ORPorts port but only for the outer loop thus resulting
in comparing an ORPort with a non-ORPort which lead to problems.
For example, tor configured with the following would fail:
ORPort auto
DirPort auto
Both end up being the same configuration except that one is a OR listener and
one is a Dir listener. Thus because of the missing check in the inner loop,
they looked exactly the same and thus one is removed.
Fixes#40195
Signed-off-by: David Goulet <dgoulet@torproject.org>
This changes the behaviour of `tor --version` in such a way.
```console
src/app/tor --version
Tor version 0.4.5.1-alpha-dev (git-46ccde66a97d7985).
Tor is running on Linux with Libevent 2.1.12-stable, OpenSSL 1.1.1h, Zlib 1.2.11, Liblzma 5.2.4, Libzstd 1.4.5 and Glibc 2.31 as libc.
Tor compiled with GCC version 10.2.0
```
Fixes#32102
Commit c3a0f75796 added this feature for ORPort
that we ignore any port that is not the family of our default address when
parsing the port. So if port_parse_config() was called with an IPv4 default
address, all IPv6 address would be ignored.
That makes sense for ORPort since we call twice port_parse_config() for
0.0.0.0 and [::] but for the rest of the ports, it is not good since a
perfectly valid configuration can be:
SocksPort 9050
SocksPort [::1]:9050
Any non-ORPort only binds by default to an IPv4 except the ORPort that binds
to both IPv4 and IPv6 by default.
The fix here is to always parse all ports within port_parse_config() and then,
specifically for ORPort, remove the duplicates or superseding ones. The
warning is only emitted when a port supersedes another.
A unit tests is added to make sure SocksPort of different family always exists
together.
Fixes#40183
Signed-off-by: David Goulet <dgoulet@torproject.org>
We already did this, but we did it by accident, which is pretty
risky: if we hadn't, then our code would have treated extra data in
the inbuf as having been transmitted as TLS-authenticated data.
Closes ticket 40017; Found by opara.
Previously, hashlib.shake_256 was a class (if present); now it can
also be a function. This change invalidated our old
compatibility/workaround code, and made one of our tests fail.
Fixes bug 40179; bugfix on 0.3.1.6-rc when the workaround code was
added.
It turns out that STAP_PROBEV() is not available on FreeBSD thus having
sdt/sdt.h is not enough. Look for it now at configure time.
Closes#40174
Signed-off-by: David Goulet <dgoulet@torproject.org>
The loop in the earlier patch would invoke undefined behavior in two
ways: First, it would check whether it was looking at a space before
it checked whether the pointer was in-range. Second, it would let a
pointer reach a position _before_ the start of a string, which is
not allowed.
I've removed the assertion about empty messages: empty messages can
be their own warning IMO.
I've also added tests for this formatting code, to make sure it
actually works.
First I began with a set of candidates:
The client's _required_ list starts with all the protocols
supported by every release in 0.2.9-stable through current
master.
The client's _required_ list starts with all the protocols
supported by every release in 0.3.5-stable through current
master.
Everybody's _recommended_ list starts with all the protocols
supported by every release in 0.3.5-stable through current master.
Then I removed the protocol versions that we do not actually want to
require or recommend:
DirCache=1 (deprecated)
HSDir=1, HSIntro=1-3, HSRend=1 (deprecated)
(All HS* protocol requirements for clients)
Link=1-3 (deprecated)
LinkAuth=1 (obsolete)
Relay=1 (obsolete)
Make it possible to specify multiple ConsensusParams torrc
lines.
Now directory authority operators can for example put the
main ConsensusParams config in one torrc file and then add to it
from a different torrc file.
Closes ticket 40164.
When calling `circpad_send_padding_cell_for_callback()`, the flag
`is_padding_timer_scheduled` was not resetted to 0 which caused an issue
in the circpad simulator.
This commit fixes this problem.
Fixes#32671.
Cons=1 is the old format of consensuses, without ed25519 keys. It
is no longer required or recommended.
Cons=2 is the new format of consensuses, with ed25519 keys. It
is now required.
(Similarly for Desc=1,2 and Microdesc=1,2)
No supported client or relay versions should be affected by this
change, since these versions are supported by clients and relays
running 0.2.9 and later. It will only take effect once enough
authorities vote for it.
Closes ticket 40162.
In brief: we go through a lot of gymnastics to handle huge protover
numbers, but after years of development we're not even close to 10
for any of our current versions. We also have a convenient
workaround available in case we ever run out of protocols: if (for
example) we someday need Link=64, we can just add Link2=0 or
something.
This patch is a minimal patch to change tor's behavior; it doesn't
take advantage of the new restrictions.
Implements #40133 and proposal 318.
Tor has a feature to preserve unrecognized state file entries in
order to maintain forward compatibility. But this feature, along
with some unused code that we never actually removed, led to us
keeping items that were of no use to the user, other than at worst
to preserve ancient information about them.
This commit adds a feature to remove obsolete entries when we load
the file.
Closes ticket 40137.
If at least one service is configured as a version 2, a log warning is emitted
once and only once.
Closes#40003
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, we introduce a flag to teach src/test/test to split its work
into chunks. Then we replace our invocation of src/test/test in our
"make check" target with a set of 8 scripts that invoke the first
8th of the tests, the second 8th, and so on.
This change makes our "make -kj4 check" target in our hardened
gitlab build more than twice as fast, since src/test/test was taking
the longest to finish.
Closes 40098.
This patch adds support for exposing the environment variables
`TOR_PT_OUTBOUND_BIND_ADDRESS_V4` and `TOR_PT_OUTBOUND_BIND_ADDRESS_V6` to
Pluggable Transport proccesses. These two values will contain the IPv4
and IPv6 address that the user have specified in torrc that they wish
the PT to use for all outgoing IP packets.
It is important to note here that it is up to the indvidual Pluggable
Transport if they are willing to honor these values or ignore them
completely.
One can test this feature using the following dummy PT written in POSIX
shell script:
#!/bin/sh
echo "LOG SEVERITY=warning MESSAGE=\"Value for IPv4: ${TOR_PT_OUTBOUND_BIND_ADDRESS_V4}\""
echo "LOG SEVERITY=warning MESSAGE=\"Value for IPv6: ${TOR_PT_OUTBOUND_BIND_ADDRESS_V6}\""
while true ; do
sleep 1
done
with the following entries in your torrc:
OutboundBindAddressPT 203.0.113.4
OutboundBindAddress 203.0.113.5
OutboundBindAddressPT 2001:db8::4
OutboundBindAddress 2001:db8::5
See: https://bugs.torproject.org/5304
[This is a squashed patch for ticket 7193, based on taking a "git
diff" for the original branch, then applying it with "git apply
-3". I earlier attempted to squash the branch with "git rebase",
but there were too many conflicts. --nickm]
The option `--enable-all-bugs-are-fatal` when used with
`--disable-module-relay` caused GCC to warn about functions that
it thought should be labeled noreturn.
I've tried a couple of approaches, but disabling the warning on
these functions seems to be the best approach.
Fixed#40129; bugfix on 0.4.4.1-alpha.
We set this flag if we've launched the connection in order to
satisfy an origin circuit, or when we decide the connection _would_
satisfy an origin circuit. These are the only or_connections we
want to consider for bootstrapping: other or_connections are opened
because of client EXTEND requests, and they may succeed or fail
because of the clients' confusion or misconfiguration.
Closes#25061.
The rend_cache/entry_free was missing the rend cache allocation increment
before freeing the object.
Without it, it had an underflow bug:
Sep 17 08:40:13.845 [warn] rend_cache_decrement_allocation(): Bug: Underflow
in rend_cache_decrement_allocation (on Tor 0.4.5.0-alpha-dev
7eef9ced61)
Fixes#40125
Signed-off-by: David Goulet <dgoulet@torproject.org>
Our code was using [01] as for the key type of signed->link certs,
which was incorrect. The value should be [03], to indicate that the
value as the SHA256 of an x.509 cert.
Fortunately, nothing cares about this value, so there shouldn't be
compatibility issues.
Fixes bug 40124; bugfix on 0.2.7.2-alpha.
tl;dr We were not counting cells flying from the client to the service, but we
were counting cells flying from the service to the client.
When a rendezvous cell arrives from the client to the RP, the RP forwards it to
the service.
For this to happen, the cell first passes through command_process_relay_cell()
which normally does the statistics counting. However because the `rend_circ`
circuit was not flagged with `circuit_carries_hs_traffic_stats` in
rend_mid_rendezvous(), the cell is not counted there.
Then the cell goes to circuit_receive_relay_cell() which has a special code
block based on `rend_splice` specifically for rendezvous cells, and the cell
gets directly passed to `rend_circ` via a direct call to
circuit_receive_relay_cell(). The cell never passes through
command_process_relay_cell() ever again and hence is never counted by our
rephist module.
The fix here is to flag the `rend_circ` circuit with
`circuit_carries_hs_traffic_stats` so that the cell is counted as soon as it
hits command_process_relay_cell().
Furthermore we avoid double-counting cells since the special code block of
circuit_receive_relay_cell() makes us count rendezvous cells only as they enter
the RP and not as they exit it.
Fixes#40117.
tl;dr We were not counting cells flying from the client to the service, but we
were counting cells flying from the service to the client.
When a rendezvous cell arrives from the client to the RP, the RP forwards it to
the service.
For this to happen, the cell first passes through command_process_relay_cell()
which normally does the statistics counting. However because the `rend_circ`
circuit was not flagged with `circuit_carries_hs_traffic_stats` in
rend_mid_rendezvous(), the cell is not counted there.
Then the cell goes to circuit_receive_relay_cell() which has a special code
block based on `rend_splice` specifically for rendezvous cells, and the cell
gets directly passed to `rend_circ` via a direct call to
circuit_receive_relay_cell(). The cell never passes through
command_process_relay_cell() ever again and hence is never counted by our
rephist module.
The fix here is to flag the `rend_circ` circuit with
`circuit_carries_hs_traffic_stats` so that the cell is counted as soon as it
hits command_process_relay_cell().
Furthermore we avoid double-counting cells since the special code block of
circuit_receive_relay_cell() makes us count rendezvous cells only as they enter
the RP and not as they exit it.
Fixes#40117.
Opening a new listener connection can fail in many ways like a bind()
permission denied on a low port for instance.
And thus, we should expect to handle an error when creating a new one instead
of assert() on it.
To hit the removed assert:
ORPort 80
KeepBindCapabilities 0
Start tor. Then edit torrc:
ORPort <some-IP>:80
HUP tor and the assert is hit.
Fixes#40073
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previously, we would treat *any* incoming circuit on a non-local
channel as meaning that our ORPort was reachable. With this patch,
we make sure that the address that the peer _says_ we have is the
same as the one we're trying to advertise right now.
Closes 20165. Bugfix on 4f5192b280 in 0.1.0.1-rc, when
reachability self-tests were first introduced.
Turns out that the HS DoS defenses parameters were overwritten by the
consensus parameters everytime a new consensus would arrive.
This means that a service operator can still enable the defenses but as soon
as the intro point relay would get a new consensus, they would be overwritten.
And at this commit, the network is entirely disabling DoS defenses.
Fix this by introducing an "explicit" flag that indicate if the
ESTABLISH_INTRO cell DoS extension set those parameters or not. If set, avoid
using the consenus at once.
We are not bumping the protover HSIntro value for this because 0.4.2.x series
is EOL in 1 month and thus 0.4.3.x would be the only series with this bug. We
are confident that a backport and then upgrade path to the latest 0.4.4.x
stable coming up soon is enough to mitigate this problem in the coming months.
It avoids the upgrade path on the service side by keeping the requirement for
protover HSIntro=5.
Fixes#40109
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, we introduce a flag to teach src/test/test to split its work
into chunks. Then we replace our invocation of src/test/test in our
"make check" target with a set of 8 scripts that invoke the first
8th of the tests, the second 8th, and so on.
This change makes our "make -kj4 check" target in our hardened
gitlab build more than twice as fast, since src/test/test was taking
the longest to finish.
Closes 40098.
