Move n_addr, n_port, and n_conn_id_digest fields of circuit_t into a separately allocated extend_info_t. Saves 22 bytes per connected circuit_t on 32-bit platforms, and makes me more comfortable with using tor_addr_t in place of uint32_t n_addr.
svn:r16257
Patch from Christian Wilms: remove (HiddenService|Rend)(Exclude)?Nodes options. They never worked properly, and nobody seems to be using them. Resolves bug 754.
svn:r16144
Never allow a circuit to be created with the same circid as a circuit that has been marked for close. May be a fix for bug 779. Needs testing. Backport candidate.
svn:r16136
Fix all but 2 DOCDOC items; defer many XXX020s (particularly those where fixing them would fix no bugs at the risk of introducing some bugs).
svn:r13529
Be more thorough about memory poisoning and clearing. Add an in-place version of aes_crypt in order to remove a memcpy from relay_crypt_one_payload.
svn:r13414
Initial attempts to track down bug 600, and refactor possibly offending code. 1) complain early if circuit state is set to OPEN when an onionskin is pending. 2) refactor onionskin field into one only used when n_conn is pending, and a separate onionskin field waiting for attention by a cpuworker. This might even fix the bug. More likely, it will make it fail with a more useful core.
svn:r13394
Refactor circuit_launch* functions to take a bitfield of flags rather than 4 separate nonconsecutive flags arguments. Also, note a possible but in circuit_find_to_cannibalize, which seems to be ignoring its purpose argument.
svn:r12948
When sending destroy cells from a circuit's origin, don't include
the reason for tearing down the circuit. The spec says we didn't,
and now we actually don't. Reported by lodger. [Bugfix on 0.1.2.x]
svn:r10790
next little while, make it only take effect _when there's an attached
origin circuit_, rather than from the first attached origin circuit
until death of the conn.
svn:r10116
Yet another attempted Bug 411 fix: Under some circumstances, a circuit can have cells without being active. The likeliest is that it has been unlinked from all connections in preparation for closing. Therefore, stop enforcing this non-invariant.
svn:r9936
Initial version of circuit-based cell queues. Instead of hammering or_conns with piles of cells, queue cells on their corresponding circuits, and append them to the or_conn as needed. This seems to work so far, but needs a bit more work. This will break the memory-use-limitation patch for begin_dir conns: the solution will be a fun but fiddly.
svn:r9904
Make all LD_BUG log messsages get prefixed with "Bug: ". Remove manually-generated "Bug: "s from log-messages. (Apparently, we remembered to add them about 40% of the time.)
svn:r9733
Fix an XXXX012, and make circuits_pending_or_conns a static variable. In addition to cleaning up the code, this may also resolve Bug 386 if Roger has the right intuition there.
svn:r9482
Removing the last DOCDOC comment hurt so much that I had to use Doxygen to identify undocumented macros and comments, and add 150 more DOCDOCs to point out where they were. Oops. Hey, kids! Fixing some of these could be your first Tor patch!
svn:r9477
Have connection_about_to_close use an end_reason field in edge_connection_t to tell what reason to tell the controller for closing the stream. Set end_reason in connection_edge_end, connection_mark_unattached_ap, and everwhere we set edge_has_sent_end. Add a changelog entry.
svn:r8779
Fix an XXX in handling destroy cells: when we get a destroy cell with reason FOO, do not tell the controller REASON=FOO. Instead, say REASON=DESTROYED REMOTE_REASON=FOO. Suggested by a conversation with Mike Perry.
svn:r8760
Apply patch from Mike Perry: add more reasons for circuit destroys. (Slightly tweaked to avoid allocating a number for an "internal" reason.)
svn:r8739
Touch up last patch (to add REASON to CIRC events): make some reasons
more sensible, send reasons only to controllers that have enabled
extended events, and clean up whitespace.
svn:r8672
Refactor connection_t into edge, or, dir, control, and base subtypes. This might save some RAM on busy exit servers, but really matters most in terms of correctness.
svn:r6906
No circuit can be both an intro point and a rend point, so we can merge both the cookie and the pk digest into one "rend_token" field for or circuits. This saves another 20 bytes per or circuit.
svn:r6904
circuit_t into origin_circuit_t and or_circuit_t. I fixed some
segaults; there may be more. We still need to move more rendezvous
stuff into subtypes.
This is a trial run for splitting up connection_t; if the approach is
insane, please say so soon so we can do something smarter.
Also, this discards the old HALF_OPEN code, which nobody seems to
want.
svn:r6817
sometimes decrement conn->n_circuits even when there was no circuit
originally. This caused conn->n_circuits to go negative.
We noticed this because we were checking if connections can be
closed based on conn->n_circuits == 0, so we were never closing
any connection that had ever had a circuit on it.
svn:r5931
we screwed up the formatting in wild and unpredictable ways.
fix it before it becomes convention to format logs in wild and
unpredictable ways.
still need to do src/common/ someday.
svn:r5551
Weasel says circuit_get_by_conn is his main timesink. Most of its
users were just checking whether OR conns had circuits, so add a
circuit count to OR conns, and check that. One was
circuit_about_to_close_conn, which was doing an O(n^2) series of calls
to get all circs on an OR conn, so make an O(n) function for that.
Finally, circuit_get_by_edge_conn was using it as a sanity test that
has been around for a while but never found any actualy insanity, so
kill that.
circuit_get_by_conn is finally dead, which is good, since it was never
sane to begin with.
svn:r5460
separately. It's important to keep them separate because internal
circuits have their last hops picked like middle hops, rather than like
exit hops. So exiting on them will break the user's expectations.
- Stop cannibalizing internal circuits for general exits, and stop
cannibalizing exit circuits for rendezvous stuff.
- Don't let new exit streams attach to internal circuits.
- When deciding if we have enough circuits for internal and for exit,
don't count the wrong ones.
- Treat predicted resolves as predicted port 80 exits.
svn:r5457
- Add a new extend_info_t datatype to hold information needed to
extend a circuit (addr,port,keyid,onion_key). Use it in cpath and
build_state. Make appropriate functions take or return it instead of
routerinfo_t or keyid.
- #if 0 needless check in circuit_get_by_edge_conn; if nobody triggers this
error in 0.1.0.10, nobody will trigger it.
- Implement new hidden service descriptor format, which contains "extend
info" for introduction points, along with protocol version list.
- Parse new format.
- Generate new format
- Cache old and new formats alongside each other.
- Directories serve "old" format if asked in old way, "newest available"
format if asked in new way.
- Use new format to find introduction points if possible; otherwise fall
back. Keep nickname lists and extendinfo lists in sync.
- Tests for new format.
- Implement new "v2" INTRODUCE cell format.
- Accept new format
- Use new format if we have a versioned service descriptor that says the
server accepts the new format.
- Add documentation for functions and data types.
svn:r4506
to the exit policy of the last hop. Intro and rendezvous circs must
be internal circs, to avoid leaking information. Resolve and connect
streams can use internal circs if they want.
New circuit pooling algorithm: make sure to have enough circs around
to satisfy any predicted ports, and also make sure to have 2 internal
circs around if we've required internal circs lately (with high uptime
if we've seen that lately).
Split NewCircuitPeriod config option into NewCircuitPeriod (30 secs),
which describes how often we retry making new circuits if current ones
are dirty, and MaxCircuitDirtiness (10 mins), which describes how long
we're willing to make use of an already-dirty circuit.
Once rendezvous circuits are established, keep using the same circuit as
long as you attach a new stream to it at least every 10 minutes. (So web
browsing doesn't require you to build new rend circs every 30 seconds.)
Cannibalize GENERAL circs to be C_REND, C_INTRO, S_INTRO, and S_REND
circ as necessary, if there are any completed ones lying around when
we try to launch one.
Re-instate the ifdef's to use version-0 style introduce cells, since
there was yet another bug in handling version-1 style. We'll try switching
over again after 0.0.9 is obsolete.
Bugfix: when choosing an exit node for a new non-internal circ, don't take
into account whether it'll be useful for any pending x.onion addresses --
it won't.
Bugfix: we weren't actually publishing the hidden service descriptor when
it became dirty. So we only published it every 20 minutes or so, which
means when you first start your Tor, the hidden service will seem broken.
svn:r3360
Now we can try setting an option but back out if it fails to parse, or
if it's disallowed (e.g. changing RunAsDaemon from 1 to 0).
Use parse_line_from_str rather than parse_line_from_file.
svn:r2692
