Stop assuming that private addresses are local when checking
reachability in a TestingTorNetwork. Instead, when testing, assume
all OR connections are remote. (This is necessary due to many test
scenarios running all nodes on localhost.)
This assists in bootstrapping a testing Tor network.
Fixes bugs 13718 & 13924.
If the consensus does not contain Exits, Tor will only build internal
circuits. In this case, relevant statuses will contain the word "internal"
as indicated in the Tor control-spec.txt. When bootstrap completes,
Tor will be ready to handle an application requesting an internal
circuit to hidden services at ".onion" addresses.
If a future consensus contains Exits, exit circuits may become available.
Tor already notifies the user at "notice" level if they have no exits in
the consensus, and can therefor only build internal paths.
Consequential change from #13718.
Tor can now build circuits from a consensus with no exits.
But if it tries to build exit circuits, they fail and flood the logs.
The circuit types in the Exit Circuits list below will only be
built if the current consensus has exits. If it doesn't,
only the Internal Circuits will be built. (This can change
with each new consensus.)
Fixes bug #13814, causes fewer path failures due to #13817.
Exit Circuits:
Predicted Exit Circuits
User Traffic Circuits
Most AP Streams
Circuits Marked Exit
Build Timeout Circuits (with exits)
Internal Circuits:
Hidden Service Server Circuits
Hidden Service Client Circuits
Hidden Service AP Streams
Hidden Service Intro Point Streams
Circuits Marked Internal
Build Timeout Circuits (with no exits)
Other Circuits?
If the consensus has no exits (typical of a bootstrapping
test network), allow tor to build circuits once enough
descriptors have been downloaded.
When there are no exits, we always have "enough"
exit descriptors. (We treat the proportion of available
exit descriptors as 100%.)
This assists in bootstrapping a testing Tor network.
Fixes bug 13718.
Makes bug 13161's TestingDirAuthVoteExit non-essential.
(But still useful for speeding up a bootstrap.)
Add router_have_consensus_path() which reports whether
the consensus has exit paths, internal paths, or whether it
just doesn't know.
Used by #13718 and #13814.
count_usable_descriptors now uses named exit_only values:
USABLE_DESCRIPTOR_ALL
USABLE_DESCRIPTOR_EXIT_ONLY
Add debug logging code for descriptor counts.
This (hopefully) resolves nickm's request in bug 13718 to improve
argument readability in nodelist.c.
choose_good_entry_server() now excludes current entry
guards and their families, unless we're in a test network,
and excluding guards would exclude all nodes.
This typically occurs in incredibly small tor networks,
and those using TestingAuthVoteGuard *
This is an incomplete fix, but is no worse than the previous
behaviour, and only applies to minimal, testing tor networks
(so it's no less secure).
Discovered as part of #13718.
Make hidden service port scanning harder by sending back REASON_DONE which
does not disclose that it was in fact an exit policy issue. After that, kill
the circuit immediately to avoid more bad requests on it.
This means that everytime an hidden service exit policy does match, the user
(malicious or not) needs to build a new circuit.
Fixes#13667.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Otherwise we risk a subsequent memdup or memcpy copying
uninitialized RAM into some other place that might eventually expose
it. Let's make sure that doesn't happen.
Closes ticket 14041
When V3AuthVotingInterval is low, decrease the delay on the
If-Modified-Since header passed to directory servers.
This allows us to obtain consensuses promptly when the consensus
interval is very short.
This assists in bootstrapping a testing Tor network.
Fixes bugs 13718 & 13963.
Decrease minimum consensus interval to 10 seconds
when TestingTorNetwork is set. (Or 5 seconds for
the first consensus.)
Fix code that assumes larger interval values.
This assists in quickly bootstrapping a testing
Tor network.
Fixes bugs 13718 & 13823.
Stop requiring exits to have non-zero bandwithcapacity in a
TestingTorNetwork. Instead, when TestingMinExitFlagThreshold is 0,
ignore exit bandwidthcapacity.
This assists in bootstrapping a testing Tor network.
Fixes bugs 13718 & 13839.
Makes bug 13161's TestingDirAuthVoteExit non-essential.
The address of an array in the middle of a structure will
always be non-NULL. clang recognises this and complains.
Disable the tautologous and redundant check to silence
this warning.
Fixes bug 14001.
The address of an array in the middle of a structure will
always be non-NULL. clang recognises this and complains.
Disable the tautologous and redundant check to silence
this warning.
A comment about an IPv6 address string incorrectly refers
to an IPv4 address format.
A log buffer is sized 10024 rather than 10240.
Fixes bug 14001.
In circuit_get_open_circ_or_launch(), for a rendezvous circuit,
rend_client_rendcirc_has_opened() but circuit_has_opened() is preferred here
since it will call the right function for a specific circuit purpose.
Furthermore, a controller event is triggered where the former did not.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
We add a compression level argument to tor_zlib_new, and use it to
determine how much memory to allocate for the zlib object. We use the
existing level by default, but shift to smaller levels for small
requests when we have been over 3/4 of our memory usage in the past
half-hour.
Closes ticket 11791.
When closing parallel introduction points, the given reason (timeout)
was actually changed to "no reason" thus when the circuit purpose was
CIRCUIT_PURPOSE_C_INTRODUCE_ACK_WAIT, we were reporting an introduction
point failure and flagging it "unreachable". After three times, that
intro point gets removed from the rend cache object.
In the case of CIRCUIT_PURPOSE_C_INTRODUCING, the intro point was
flagged has "timed out" and thus not used until the connection to the HS
is closed where that flag gets reset.
This commit adds an internal circuit reason called
END_CIRC_REASON_IP_NOW_REDUNDANT which tells the closing circuit
mechanism to not report any intro point failure.
This has been observed while opening hundreds of connections to an HS on
different circuit for each connection. This fix makes this use case to
work like a charm.
Fixes#13698.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Instead, generate new keys, and overwrite the empty key files.
Adds FN_EMPTY to file_status_t and file_status.
Fixes bug 13111.
Related changes due to review of FN_FILE usage:
Stop generating a fresh .old RSA key file when the .old file is missing.
Avoid overwriting .old key files with empty key files.
Skip loading zero-length extra info store, router store, stats, state,
and key files.
Stop crashing when a NULL filename is passed to file_status(),
instead, return FN_ERROR.
Also return FN_ERROR when a zero-length filename is passed to file_status().
Fixed as part of bug 13111.
Authorities are no longer voting on Named, so specifying nodes by
nickname isn't a clever thing to do. (Not that it ever was!) So
remove the documentation that suggests that you should do it.
Additionally, add proper cross-references to our __node__ lists, and
explain about the optional $ before identity digests.
Also, the oxford comma: endorsed by Steven Pinker, my spouse, and my
11th grade English teacher.
Closes 13381.
We were only using it when smartlist_choose_node_by_bandwidth_weights
failed. But that function could only fail in the presence of
buggy/ancient authorities or in the absence of a consensus. Either
way, it's better to use sensible defaults and a nicer algorithm.
Now, if a router ever changes its microdescriptor, but the new
microdescriptor SHA256 hash has the same 160-bit prefix as the old
one, we treat it as a new microdescriptor when deciding whether to
copy status information.
(This function also is used to compare SHA1 digests of router
descriptors, but don't worry: the descriptor_digest field either holds
a SHA256 hash, or a SHA1 hash padded with 0 bytes.)
Silence clang warnings under --enable-expensive-hardening, including:
+ implicit truncation of 64 bit values to 32 bit;
+ const char assignment to self;
+ tautological compare; and
+ additional parentheses around equality tests. (gcc uses these to
silence assignment, so clang warns when they're present in an
equality test. But we need to use extra parentheses in macros to
isolate them from other code).
I concatenated the remaining changes/* files, removed them, made the
headings more uniform, then told format_changelog.py to sort,
collate, and wrap them.
By now, support in the network is widespread and it's time to require
more modern crypto on all Tor instances, whether they're clients or
servers. By doing this early in 0.2.6, we can be sure that at some point
all clients will have reasonable support.
Ensure we securely wipe keys from memory after
crypto_digest_get_digest and init_curve25519_keypair_from_file
have finished using them.
Fixes bug 13477.
Add unit tests for tor_timegm signed overflow,
tor_timegm and parse_rfc1123_time validity checks,
and correct_tm year clamping.
Unit tests (visible) fixes in bug 13476.
Check all date/time values passed to tor_timegm
and parse_rfc1123_time for validity, taking leap
years into account.
Improves HTTP header validation.
Avoid unlikely signed integer overflow in tor_timegm
on systems with 32-bit time_t.
Fixes bug 13476.
One pain point in evolving the Tor design and implementing has been
adding code that makes clients reject directory documents that they
previously would have accepted, if those descriptors actually exist.
When this happened, the clients would get the document, reject it,
and then decide to try downloading it again, ad infinitum. This
problem becomes particularly obnoxious with authorities, since if
some authorities accept a descriptor that others don't, the ones
that don't accept it would go crazy trying to re-fetch it over and
over. (See for example ticket #9286.)
This patch tries to solve this problem by tracking, if a descriptor
isn't parseable, what its digest was, and whether it is invalid
because of some flaw that applies to the portion containing the
digest. (This excludes RSA signature problems: RSA signatures
aren't included in the digest. This means that a directory
authority can still put another directory authority into a loop by
mentioning a descriptor, and then serving that descriptor with an
invalid RSA signatures. But that would also make the misbehaving
directory authority get DoSed by the server it's attacking, so it's
not much of an issue.)
We already have a mechanism to mark something undownloadable with
downloadstatus_mark_impossible(); we use that here for
microdescriptors, extrainfos, and router descriptors.
Unit tests to follow in another patch.
Closes ticket #11243.
Fix an instance of integer overflow in format_time_interval() when
taking the absolute value of the supplied signed interval value.
Fixes bug 13393.
Create unit tests for format_time_interval().
Bitwise check for the BRIDGE_DIRINFO flag, rather than checking for
equality.
Fixes a (potential) bug where directories offering BRIDGE_DIRINFO,
and some other flag (i.e. microdescriptors or extrainfo),
would be ignored when looking for bridge directories.
Final fix in series for bug 13163.
Document usage of the NO_DIRINFO and ALL_DIRINFO flags clearly in functions
which take them as arguments. Replace 0 with NO_DIRINFO in a function call
for clarity.
Seeks to prevent future issues like 13163.
Stop using the default authorities in networks which provide both
AlternateDirAuthority and AlternateBridgeAuthority.
This bug occurred due to an ambiguity around the use of NO_DIRINFO.
(Does it mean "any" or "none"?)
Partially fixes bug 13163.
If (GNU) Make 3.81 is running processes in parallel using -j2 (or more),
it waits until all descendent processes have exited before it returns to
the shell.
When a command like "make -j2 test-network" is run, this means that
test-network.sh apparently hangs until it either make is forcibly
terminated, or all the chutney-launched tor processes have exited.
A workaround is to use make without -j, or make -j1 if there is an
existing alias to "make -jn" in the shell.
We resolve this bug in tor by using "chutney stop" after "chutney verify"
in test-network.sh.
Cases that now send errors:
* Malformed IP address (SOCKS5_GENERAL_ERROR)
* CONNECT/RESOLVE request with IP, when SafeSocks is set
(SOCKS5_NOT_ALLOWED)
* RESOLVE_PTR request with FQDN (SOCKS5_ADDRESS_TYPE_NOT_SUPPORTED)
* Malformed FQDN (SOCKS5_GENERAL_ERROR)
* Unknown address type (SOCKS5_ADDRESS_TYPE_NOT_SUPPORTED)
Fixes bug 13314.
Add a --delay option to test-network.sh, which configures the delay before
the chutney network tests for data transmission. The default remains at
18 seconds if the argument isn't specified.
Apparently we should be using bootstrap status for this (eventually).
Partially implements ticket 13161.
The default shell on OS X is bash, which has a builtin echo. When called
in "sh" mode, this echo does not accept "-n". This patch uses "/bin/echo -n"
instead.
Partially fixes issue 13161.
Add the TestingDirAuthVoteExit option, a list of nodes to vote Exit for,
regardless of their uptime, bandwidth, or exit policy.
TestingTorNetwork must be set for this option to have any effect.
Works around an issue where authorities would take up to 35 minutes to
give nodes the Exit flag in a test network, despite short consensus
intervals. Partially implements ticket 13161.
Fixes bug 13295; bugfix on 0.2.5.3-alpha.
The alternative here is to call crypto_global_init() from tor-resolve,
but let's avoid linking openssl into tor-resolve for as long as we
can.
