Stop attempting to unconditionally mirror the tor repository in GitLab
CI. This prevented developers from enabling GitLab CI on master
because the "update" job would attempt to run, causing an unuseful CI
failure. Fixes bug 23755.
Skip test_config_include_no_permission() when running as root, because
it will get an unexpected success from config_get_lines_include().
This affects some continuous integration setups. Fixes bug 23758.
Add more explanation in doc/HACKING about how to read gcov output,
including a reference to the gcov documentation in the GCC manual.
Also add details about how our postprocessing scripts modify gcov
output.
When we added HTTPTunnelPort, the answer that we give when you try
to use your SOCKSPort as an HTTP proxy became wrong. Now we explain
that Tor sorta _is_ an HTTP proxy, but a SOCKSPort isn't.
I have left the status line the same, in case anything is depending
on it. I have removed the extra padding for Internet Explorer,
since the message is well over 512 bytes without it.
Fixes bug 23678; bugfix on 0.3.2.1-alpha.
Without this fix, changes from client to bridge don't trigger
transition_affects_workers(), so we would never have actually
initialized the cpuworkers.
Fixes bug 23693. Bugfix on 3bcdb26267 0.2.6.3-alpha, which
fixed bug 14901 in the general case, but not on the case where
public_server_mode() did not change.
Because our monotonic time interface doesn't play well with value set to 0,
always initialize to now() the scheduler_last_run at init() of the KIST
scheduler.
Fixes#23696
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a channel is scheduled and flush cells returns 0 that is no cells to
flush, we flag it back in waiting for cells so it doesn't get stuck in a
possible infinite loop.
It has been observed on moria1 where a closed channel end up in the scheduler
where the flush process returned 0 cells but it was ultimately kept in the
scheduling loop forever. We suspect that this is due to a more deeper problem
in tor where the channel_more_to_flush() is actually looking at the wrong
queue and was returning 1 for an empty channel thus putting the channel in the
"Case 4" of the scheduler which is to go back in pending state thus
re-considered at the next iteration.
This is a fix that allows the KIST scheduler to recover properly from a not
entirelly diagnosed problem in tor.
Fixes#23676
Signed-off-by: David Goulet <dgoulet@torproject.org>
When we added single_conn_free_bytes(), we cleared the outbuf on a
connection without setting outbuf_flushlen() to 0. This could cause
an assertion failure later on in flush_buf().
Fixes bug 23690; bugfix on 0.2.6.1-alpha.
This caused a BUG log when we noticed that the circuit had no
channel. The likeliest culprit for exposing that behavior is
d769cab3e5, where we made circuit_mark_for_close() NULL out
the n_chan and p_chan fields of the circuit.
Fixes bug 8185; bugfix on 0.2.5.4-alpha, I think.
My current theory is that this is just a marked circuit that hasn't
closed yet, but let's gather more information in case that theory is
wrong.
Diagnostic for 8185.
This patch ensures that we return TOR_COMPRESS_BUFFER_FULL in case we
have a input bytes left to process, but are out of output buffer or in
case we need to finish where the compression implementation might need
to write an epilogue.
See: https://bugs.torproject.org/23551
Make the "Exit" flag assignment only depend on whether the exit
policy allows connections to ports 80 and 443. Previously relays
would get the Exit flag if they allowed connections to one of
these ports and also port 6667.
Resolves ticket 23637.
Back in 0.2.4.3-alpha (e106812a77), when we switched from using
double to using uint64 for selecting by bandwidth, I got the math
wrong: I should have used llround(x), or (uint64_t)(x+0.5), but
instead I wrote llround(x+0.5). That means we would always round
up, rather than rounding to the closest integer
Fixes bug 23318; bugfix on 0.2.4.3-alpha.
The clock_skew_warning() refactoring allowed calls from
or_state_load() to control_event_bootstrap_problem() to occur prior
bootstrap phase 0, causing an assertion failure. Initialize the
bootstrap status prior to calling clock_skew_warning() from
or_state_load().
or_state_load() was using an incorrect sign convention when calling
clock_skew_warning() to warn about state file clock skew. This caused
the wording of the warning to be incorrect about the direction of the
skew.
Previously we would detect the system openssl on OSX, and then fail
to use it, since we required Open 1.0.1 or later. That's silly!
Instead of looking for RAND_add(), look for TLSv1_1_method(): it was
introduced in 1.0.1, and is also present in LibreSSL.
Also, add the hombebrew path to our search path here.
Fixes bug 23602; bugfix on 0.2.7.2-alpha.
Authority IPv6 addresses were originally added in 0.2.8.1-alpha.
This leaves 3/8 directory authorities with IPv6 addresses, but there
are also 52 fallback directory mirrors with IPv6 addresses.
Resolves 19760.
RENDEZVOUS1 cell is 84 bytes long in v3 and 168 bytes long in v2 so this
commit pads with random bytes the v3 cells up to 168 bytes so they all look
alike at the rendezvous point.
Closes#23420
Signed-off-by: David Goulet <dgoulet@torproject.org>
This warning is caused by a different tv_usec data type on macOS
compared to the system on which the patch was developed.
Fixes 23575 on 0.3.2.1-alpha.
An unnecessary routerlist check in the NETINFO clock skew detection in
channel_tls_process_netinfo_cell() was preventing clients from
reporting NETINFO clock skew to controllers.
This patch replaces a few calls to router_get_by_id_digest ("do we
have a routerinfo?") with connection_or_digest_is_known_relay ("do
we know this relay to be in the consensus, or have been there some
time recently?").
Found while doing the 21585 audit; fixes bug 23533. Bugfix on
0.3.0.1-alpha.
Make download status next attempts reported over the control port
consistent with the time used by tor. This issue only occurs if a
download status has not been reset before it is queried over the
control port.
Fixes 23525, not in any released version of tor.
If future code asks if there are any running bridges, without checking
if bridges are enabled, log a BUG warning rather than crashing.
Fixes 23524 on 0.3.0.1-alpha
Directory servers now include a "Date:" http header for response
codes other than 200. Clients starting with a skewed clock and a
recent consensus were getting "304 Not modified" responses from
directory authorities, so without a Date header the client would
never hear about a wrong clock.
Fixes bug 23499; bugfix on 0.0.8rc1.
This change refactors find_dl_schedule() to only call dependent functions
as needed. In particular, directory_fetches_from_authorities() only needs
to be called on clients.
Stopping spurious directory_fetches_from_authorities() calls on every
download on public relays has the following impacts:
* fewer address resolution attempts, particularly those mentioned in 21789
* fewer descriptor rebuilds
* fewer log messages, particularly those limited in 20610
Fixes 23470 in 0.2.8.1-alpha.
The original bug was introduced in commit 35bbf2e as part of prop210.
OpenBSD doesn't like tricks where you use a too-wide sscanf argument
for a too-narrow array, even when you know the input string
statically. The fix here is just to use bigger buffers.
Fixes 15582; bugfix on a3dafd3f58 in 0.2.6.2-alpha.
But when clients are just starting, make them try each bridge a few times
before giving up on it.
These changes make the bridge download schedules more explicit: before
17750, they relied on undocumented behaviour and specific schedule
entries. (And between 17750 and this fix, they were broken.)
Fixes 23347, not in any released version of tor.
The download schedule tells Tor to wait 15 minutes before downloading
bridge descriptors. But 17750 made Tor ignore that and start immediately.
Since we fixed 17750, Tor waits 15 minutes for bridge client bootstrap,
like the schedule says.
This fixes the download schedule to start immediately, and to try each
bridge 3 times in the first 30 seconds. This should make bridge bootstraps
more reliable.
Fixes 23347.
When option validation or transition is happening, there are no
"current options" -- only "old options" and "maybe new options".
Looking at get_options() is likely a mistake, so have a nonfatal
assertion let us know if we do that.
Closes 22281.
Undeprecate it;
rename it to TestingClientDNSRejectInternalAddresses;
add the old name as an alias;
reject configurations where it is set but TestingTorNetwork is not;
change the documentation accordingly.
Closes tickets 21031 and 21522.
There are two reasons this is likeliest to happen -- no kernel
support, and some bug in Tor. We'll ask people to check the former
before they report. Closes 23090.
The chdir() call in RunAsDaemon makes the behavior here surprising,
and either way of trying to resolve the surprise seems sure to
startle a significant fraction of users. Instead, let's refuse to
guess, and refuse these configurations.
Closes ticket 22731.
The function was never returning an error code on failure to parse the
OutboundAddress* options.
In the process, it was making our test_options_validate__outbound_addresses()
not test the right thing.
Fixes#23366
Signed-off-by: David Goulet <dgoulet@torproject.org>
Some parentheses were missing making the rend_max_intro_circs_per_period()
return a lower value than it was suppose to.
The calculation is that a service at most will open a number of intro points
that it wants which is 3 by default or HiddenServiceNumIntroductionPoints. Two
extra are launched for performance reason. Finally, this can happen twice for
two descriptors for the current and next time period.
From:
2 * n_intro_wanted + 2
...which resulted in 8 for 3 intro points, this commit fixes it to:
(n_intro_wanted + 2) * 2
... resulting in 12 possible intro point circuit which is the correct maximum
intro circuit allowed per period.
Last, this commit rate limits the the log message if we ever go above that
limit else over a INTRO_CIRC_RETRY_PERIOD, we can print it often!
Fixes#22159
Signed-off-by: David Goulet <dgoulet@torproject.org>
