When fetching a descriptor, we know test every introduction points in it
against our rend failure cache to know if we keep it or not. For this to
work, now everytime an introduction points is discareded (ex: receiving a
NACK), we note it down in our introduction cache.
See rendcache.c for a detailed explanation of the cache's behavior.
Fixes#16389
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When we removed Running/Valid checks from Fast and Stable in 8712, I
removed them from HSDir too, which apparently wasn't a good idea.
Reverts part of a65e835800. Fixes bug 16524. Bugfix
on 0.2.7.2-alpha.
microdesc_free_() called get_microdesc_cache(), which had the fun
side-effect of potentially reloading the whole cache from disk.
Replace it with a variant that doesn't.
The base64 and base32 functions used to be in crypto.c;
crypto_format.h had no header; some general-purpose functions were in
crypto_curve25519.c.
This patch makes a {crypto,util}_format.[ch], and puts more functions
there. Small modules are beautiful!
The control port was using set_max_file_descriptors() with a limit set to 0
to query the number of maximum socket Tor can use. With the recent changes
to that function, a check was introduced to make sure a user can not set a
value below the amount we reserved for non socket.
This commit adds get_max_sockets() that returns the value of max_sockets so
we can stop using that "setter" function to get the current value.
Finally, the dead code is removed that is the code that checked for limit
equal to 0. From now on, set_max_file_descriptors() should never be used
with a limit set to 0 for a valid use case.
Fixes#16697
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
1) We already require C99.
2) This allows us to support MSVC again (thanks to Gisle Vanem for
this part)
3) This change allows us to dump some rotten old compatibility code
from log.c
Make sure that signing certs are signed by the right identity key,
to prevent a recurrence of #16530. Also make sure that the master
identity key we find on disk matches the one we have in RAM, if we
have one.
This is for #16581.
When there is a signing key and the certificate lists a key, make
sure that the certificate lists the same signing key.
When there are public key and secret key stored in separate files,
make sure they match.
Use the right file name when we load an encrypted secret key and
then find a problem with it.
This is part of 16581.
When cleaning up extra circuits that we've opened for performance reason, we
need to count all the introduction circuit and not only the established ones
else we can end up with too many introduction points.
This also adds the check for expiring nodes when serving an INTRODUCE cell
since it's possible old clients are still using them before we have time to
close them.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
To upload a HS descriptor, this commits makes it that we wait for all
introduction point to be fully established.
Else, the HS ends up uploading a descriptor that may contain intro points
that are not yet "valid" meaning not yet established or proven to work. It
could also trigger three uploads for the *same* descriptor if every intro
points takes more than 30 seconds to establish because of desc_is_dirty
being set at each intro established.
To achieve that, n_intro_points_established varialbe is added to the
rend_service_t object that is incremented when we established introduction
point and decremented when we remove a valid intro point from our list.
The condition to upload a descriptor also changes to test if all intro
points are ready by making sure we have equal or more wanted intro points
that are ready.
The desc_id_dirty flag is kept to be able to still use the
RendInitialPostPeriod option.
This partially fixes#13483.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
There is a case where if the introduction circuit fails but the node is
still in the consensus, we clean up the intro point and choose an other one.
This commit fixes that by trying to reuse the existing intro point with a
maximum value of retry.
A retry_nodes list is added to rend_services_introduce() and when we remove
an invalid intro points that fits the use case mentionned before, we add the
node to the retry list instead of removing it. Then, we retry on them before
creating new ones.
This means that the requirement to remove an intro point changes from "if no
intro circuit" to "if no intro circuit then if no node OR we've reached our
maximum circuit creation count".
For now, the maximum retries is set to 3 which it completely arbitrary. It
should also at some point be tied to the work done on detecting if our
network is down or not.
Fixes#8239
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The reasoning for refactoring this function is that removing the
introduction point adaptative algorithm (#4862) ended up changing quite a
bit rend_services_introduce(). Also, to fix some open issues (#8239, #8864
and #13483), this work had to be done.
First, this removes time_expiring variable in an intro point object and
INTRO_POINT_EXPIRATION_GRACE_PERIOD trickery and use an expiring_nodes list
where intro nodes that should expire are moved to that list and cleaned up
only once the new descriptor is successfully uploaded. The previous scheme
was adding complexity and arbitrary timing to when we expire an intro point.
We keep the intro points until we are sure that the new descriptor is
uploaded and thus ready to be used by clients. For this,
rend_service_desc_has_uploaded() is added to notify the HS subsystem that
the descriptor has been successfully uploaded. The purpose of this function
is to cleanup the expiring nodes and circuits if any.
Secondly, this adds the remove_invalid_intro_points() function in order to
split up rend_services_introduce() a bit with an extra modification to it
that fixes#8864. We do NOT close the circuit nor delete the intro point if
the circuit is still alive but the node was removed from the consensus. Due
to possible information leak, we let the circuit and intro point object
expire instead.
Finally, the whole code flow is simplified and large amount of documentation
has been added to mostly explain the why of things in there.
Fixes#8864
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This is a way to specify the amount of introduction points an hidden service
can have. Maximum value is 10 and the default is 3.
Fixes#4862
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When we ran out of intro points for a hidden service (which could
happen on a newnym), we would change the connection's state back to
"waiting for hidden service descriptor." But this would make an
assertion fail if we went on to call circuit_get_open_circ_or_launch
again.
This fixes bug 16013; I believe the bug was introduced in
38be533c69, where we made it possible for
circuit_get_open_circ_or_launch() to change the connection's state.
When I fixed#11243, I made it so we would take the digest of a
descriptor before tokenizing it, so we could desist from download
attempts if parsing failed. But when I did that, I didn't remove an
assertion that the descriptor began with "onion-key". Usually, this
was enforced by "find_start_of_next_microdescriptor", but when
find_start_of_next_microdescriptor returned NULL, the assertion was
triggered.
Fixes bug 16400. Thanks to torkeln for reporting and
cypherpunks_backup for diagnosing and writing the first fix here.
Every functions and objects that are used for hidden service descriptor
caches are moved to rendcache.{c|h}.
This commit does NOT change anything, just moving code around.
Fixes#16399
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
For now, rend_cache_entry_t has been moved from or.h to rendcache.h and
those files have been added to the build system.
In the next commit, these will contain hidden service descriptor cache ABI
and API for both client and directory side. The goal is to consolidate the
descriptor caches in one location to ease development, maintenance, review
and improve documentation for each cache behavior and algorithm.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When --keygen is provided, we prompt for a passphrase when we make a
new master key; if it is nonempty, we store the secret key in a new
crypto_pwbox.
Also, if --keygen is provided and there *is* an encrypted master key,
we load it and prompt for a passphrase unconditionally.
We make a new signing key unconditionally when --keygen is provided.
We never overwrite a master key.
If crypto_early_init fails, a typo in a return value from tor_init
means that tor_main continues running, rather than returning
an error value.
Fixes bug 16360; bugfix on d3fb846d8c in 0.2.5.2-alpha,
introduced when implementing #4900.
Patch by "teor".
This reverts commit 9407040c59.
Small fix, "e->received" had to be removed since that variable doesn't exist
anymore.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
signing_key can be NULL in ed_key_init_from_file in routerkeys.c.
Discovered by clang 3.7 address sanitizer.
Fix on c03694938e, not in any released version of Tor.
Rend_add_service() frees its argument on failure; no need to free again.
Fixes bug 16228, bugfix on 0.2.7.1-alpha
Found by coverity; this is CID 1301387.
Also, have testing-level options to set the lifetimes and
expiration-tolerances of all key types, plus a non-testing-level
option to set the lifetime of any auto-generated signing key.
# The first commit's message is:
Regenerate ed25519 keys when they will expire soon.
Also, have testing-level options to set the lifetimes and
expiration-tolerances of all key types, plus a non-testing-level
option to set the lifetime of any auto-generated signing key.
# The 2nd commit message will be skipped:
# fixup! Regenerate ed25519 keys when they will expire soon.
This is a new collator type that follows proposal 220 for deciding
which identities to include. The rule is (approximately):
If a <ed,rsa> identity is listed by more than half of authorities,
include it. And include all <rsa> votes about that node as
matching.
Otherwise, if an <*,rsa> or <rsa> identity is listed by more than
half of the authorities, and no <ed,rsa> has been listed, include
it.
* Include ed25519 identities in votes
* Include "no ed25519 identity" in votes
* Include some commented-out code about identity voting. (This
will disappear.)
* Include some functions for identity voting (These will disappear.)
* Enforce uniqueness in ed25519 keys within a vote
Extrainfo documents are now ed-signed just as are router
descriptors, according to proposal 220. This patch also includes
some more tests for successful/failing parsing, and fixes a crash
bug in ed25519 descriptor parsing.
An earlier version of these tests was broken; now they're a nicer,
more robust, more black-box set of tests. The key is to have each
test check a handshake message that is wrong in _one_ way.
When there are annotations on a router descriptor, the
ed25519-identity element won't be at position 0 or 1; it will be at
router+1 or router-1.
This patch also adds a missing smartlist function to search a list for
an item with a particular pointer.
With this patch:
* Authorities load the key-pinning log at startup.
* Authorities open a key-pinning log for writing at startup.
* Authorities reject any router with an ed25519 key where they have
previously seen that ed25519 key with a different RSA key, or vice
versa.
* Authorities warn about, but *do not* reject, RSA-only descriptors
when the RSA key has previously gone along with an Ed25519 key.
(We should make this a 'reject' too, but we can't do that until we're
sure there's no legit reason to downgrade to 0.2.5.)
This module implements a key-pinning mechanism to ensure that it's
safe to use RSA keys as identitifers even as we migrate to Ed25519
keys. It remembers, for every Ed25519 key we've seen, what the
associated Ed25519 key is. This way, if we see a different Ed25519
key with that RSA key, we'll know that there's a mismatch.
We persist these entries to disk using a simple format, where each
line has a base64-encoded RSA SHA1 hash, then a base64-endoded
Ed25519 key. Empty lines, misformed lines, and lines beginning with
a # are ignored. Lines beginning with @ are reserved for future
extensions.
Routers now use TAP and ntor onion keys to sign their identity keys,
and put these signatures in their descriptors. That allows other
parties to be confident that the onion keys are indeed controlled by
the router that generated the descriptor.
Routers now use TAP and ntor onion keys to sign their identity keys,
and put these signatures in their descriptors. That allows other
parties to be confident that the onion keys are indeed controlled by
the router that generated the descriptor.
For prop220, we have a new ed25519 certificate type. This patch
implements the code to create, parse, and validate those, along with
code for routers to maintain their own sets of certificates and
keys. (Some parts of master identity key encryption are done, but
the implementation of that isn't finished)
As OpenSSL >= 1.0.0 is now required, ECDHE is now mandatory. The group
has to be validated at runtime, because of RedHat lawyers (P224 support
is entirely missing in the OpenSSL RPM, but P256 is present and is the
default).
Resolves ticket #16140.
When set, this limits the maximum number of simultaneous streams per
rendezvous circuit on the server side of a HS, with further RELAY_BEGIN
cells being silently ignored.
This can be modified via "HiddenServiceMaxStreamsCloseCircuit", which
if set will cause offending rendezvous circuits to be torn down instead.
Addresses part of #16052.
Ephemeral services will be listed in rend_services_list at the end of
rend_config_services, so it must check whether directory is non-NULL
before comparing.
This crash happens when reloading config on a tor with mixed configured
and ephemeral services.
Fixes bug #16060. Bugfix on 0.2.7.1-alpha.
For FAILED and RECEIVED action of the HS_DESC event, we now sends back the
descriptor ID at the end like specified in the control-spec section 4.1.25.
Fixes#15881
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The length of auth_data from an INTRODUCE2 cell is checked when the
auth_type is recognized (1 or 2), but not for any other non-zero
auth_type. Later, auth_data is assumed to have at least
REND_DESC_COOKIE_LEN bytes, leading to a client-triggered out of bounds
read.
Fixed by checking auth_len before comparing the descriptor cookie
against known clients.
Fixes#15823; bugfix on 0.2.1.6-alpha.
"+HSPOST" and the related event changes allow the uploading of HS
descriptors via the control port, and more comprehensive event
monitoring of HS descriptor upload status.
When we have a new descriptor ID for an onion address request, change it in
the rend_data_t object and purge the old one from the last hid serv request
cache.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Stop using an onion address since it's not indexed with that anymore in the
last hid serv request cache. Instead use a base32 encoded descriptor ID
contained in the rend_data_t object.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Every callsite that use to allocate a rend_data_t object now use the
rend_data_client/service_create() function.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Ground works for fixing #15816. This adds the rend_data_create() function in
order to have a single place where we initialize that data structure.
Furthermore, an array of descriptor IDs is added (one per replica) so we can
keep a copy of the current id in the object. It will be used to purge the
last hid serv request cache using those descriptor IDs. When they change,
they will be replaced and the old ones will be purged from the cache.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Fixes#15850, part of #15801. Change file is added by this commit. The
original comment in the reverted commit is removed because right now we
*need* a DirPort until #15849 is implemented so no doubt nor confusion there
anymore.
This reverts commit 80bed1ac96.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
These commands allow for the creation and management of ephemeral
Onion ("Hidden") services that are either bound to the lifetime of
the originating control connection, or optionally the lifetime of
the tor instance.
Implements #6411.
The "longest possible policy" comment in
router_parse_addr_policy_item_from_string() used an example policy
that was actually shorter than the maximum length.
This comment was amended, and expanded to count the maximum number of
characters.
Comment change only.
Unit tests for the 10 valid combinations of set/NULL config options
DirAuthorities, AlternateBridgeAuthority, AlternateDirAuthority,
and FallbackDir.
Add assertion in consider_adding_dir_servers() for checks in
validate_dir_servers():
"You cannot set both DirAuthority and Alternate*Authority."
Only add the default fallback directories when the DirAuthorities,
AlternateDirAuthority, and FallbackDir directory config options
are set to their defaults.
The default fallback directory list is currently empty, this fix will
only change tor's behaviour when it has default fallback directories.
Fixes bug 15642; bugfix on 90f6071d8d in 0.2.4.7-alpha. Patch by "teor".
When self-testing reachability, use ExtendAllowPrivateAddresses
to determine if local/private addresses imply reachability.
The previous fix used TestingTorNetwork, which implies
ExtendAllowPrivateAddresses, but this excluded rare configs where
ExtendAllowPrivateAddresses is set but TestingTorNetwork is not.
Fixes bug 15771; bugfix on 0.2.6.1-alpha, bug #13924.
Patch by "teor", issue discovered by CJ Ess.
The HS_DESC_CONTENT event results in multiple line thus must be prefixed
with a "650+" and ending with "650 OK".
Reported-by: Damian Johnson <atagar@torproject.org>
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The HS_DESC event was using rend_data_t from the dir connection to reply the
onion address and authentication type. With the new HSFETCH command, it's
now possible to fetch a descriptor only using the descriptor id thus
resulting in not having an onion address in any HS_DESC event.
This patch removes rend_query from the hs desc control functions and replace
it by an onion address string and an auth type.
On a successful fetch, the service id is taken from the fetched descriptor.
For that, an extra parameter is added to "store as a client" function that
contains the cache entry stored.
This will make the control event functions scale more easily over time if
other values not present in rend_data_t are needed since the rend_data from
the dir connection might not contained everything we need.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Big refactor of the HS client descriptor fetch functionnality. This allows
to fetch an HS descriptor using only a descriptor ID. Furthermore, it's also
possible to provide a list of HSDir(s) now that are used instead of the
automatically choosen one.
The approach taken was to add a descriptor_id field to the rend_data_t
structure so it can be used, if available, by the HS client. The onion
address field however has priority over it that is if both are set, the
onion address is used to fetch the descriptor.
A new public function is introduced called rend_client_fetch_v2_desc(...)
that does NOT lookup the client cache before fetching and can take a list of
HSDirs as a parameter.
The HSFETCH control command now uses this new function thus making it work
and final.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
As defined in section 4.1.26 in the control-spec.txt, this new event replies
the content of a successfully fetched HS descriptor. This also adds a unit
test for the controller event.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This adds the command on the controller side that parses and validate
arguments but does nothing for now. The HS desriptor fetch must be
modularized a bit more before we can use the command.
See control-spec.txt section 3.26 for more information on this command.
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Incidently, this fixes a bug where the maximum value was never used when
only using crypto_rand_int(). For instance this example below in
rendservice.c never gets to INTRO_POINT_LIFETIME_MAX_SECONDS.
int intro_point_lifetime_seconds =
INTRO_POINT_LIFETIME_MIN_SECONDS +
crypto_rand_int(INTRO_POINT_LIFETIME_MAX_SECONDS -
INTRO_POINT_LIFETIME_MIN_SECONDS);
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
An introduction point is currently rotated when the amount of INTRODUCE2
cells reached a fixed value of 16384. This makes it pretty easy for an
attacker to inflate that number and observe when the IP rotates which leaks
the popularity of the HS (amount of client that passed through the IP).
This commit makes it a random count between the current value of 16384 and
two times that.
Fixes#15745
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Background processes spawned by Tor now will have a valid stdin.
Pluggable transports can detect this behavior with the aformentioned
enviornment variable, and exit if stdin ever gets closed.
The rend-spec.txt document doesn't specify this extra newline. Furthermore,
this is the only descryptor type that contains one. Client and HSDir without
this patch still work perfectly since the HS descriptor parsing doesn't
expect a newline at the end.
Fixes#15296
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Remove src/or/or_sha1.i and src/common/common_sha1.i on `make clean` and remove
the temporary micro-revision file when its no longer needed.
Additional changes;
- show a message when generating the micro-revision file.
- add the temporary micro revision file to the list of files to be removed on
`make clean` just in case.
- fix indentation of the make rule to improve readability.
PTs expect the auth cookie to be available immedieately after launch,
leading to a race condition when PTs opt to cache the extorport cookie
once immediately after startup.
Fixes#15240.
Report errors if the notification fails; report success only if it
succeeds; and if we are not notifying systemd because we aren't
running with systemd, don't log at notice.
We already log whenever our state changes, e.g. whenever new directory
information arrives. This additional log_warn() will at best just add more
log messages, or worse, make the user wonder what she needs to fix.
(Changed after consultation with Yawning.)
Nothing ever uses the string when we're in "have minimum dir info"
state. The flow of the function is "check for problems, if you see a
problem write an explanation to dir_info_status and set res to 0". If
you get to the end of the function without any problems, then res =
1 and we're all ready to start making circuits.
(Changed after consultation with Yawning.)
Parse the file just before voting and apply its information to the
provided vote_routerstatus_t. This follows the same logic as when
dirauths parse bwauth files.
`dir_info_status` is used from main.c:directory_info_has_arrived() to
provide useful (INFO/NOTICE) level logging to users, and should always
be updated regardless of the rate limiting.
This adds the key "hs/client/desc/id/<ADDR>" to the GETINFO command used to
lookup the given onion address in the client hs descriptor cache.
If found, prints it formatted as specified in section 1.3 of rend-spec.txt.
Fixes#14845
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
The idea here is that a controller should be able to make Tor produce a
new relay descriptor on demand, without that descriptor actually being
uploaded to the dirauths (they would likely reject it anyway due to
freshness concerns).
Implements #14784.
Allow building a router descriptor without storing it to global state.
This is in preparation of a patch to export the created descriptors via
the control port.
The issue is that we use the cpuworker system with relays only, so if we
start up as a client and transition to being a relay later, we'll be
sad.
This fixes bug 14901; not in any released version of Tor.
They have been off-by-default since 0.2.5 and nobody has complained. :)
Also remove the buf_shrink() function, which hasn't done anything
since we first stopped using contiguous memory to store buffers.
Closes ticket 14848.
This fixes a bug where we decide to free the circuit because it isn't on
any workqueue anymore, and then the job finishes and the circuit gets
freed again.
Fixes bug #14815, not in any released version of Tor.
like might happen for Tails or Whonix users who start with a very wrong
hardware clock, use Tor to discover a more accurate time, and then
fix their clock.
Resolves part of ticket 8766.
(There are still some timers in various places that aren't addressed yet.)
In #14803, Damian noticed that his Tor sometimes segfaults. Roger noted
that his valgrind gave an invalid write of size one here. Whenever we
use FLEXIBLE_ARRAY_MEMBER, we have to make sure to actually malloc a
thing that's large enough.
Fixes bug #14803, not in any released version of Tor.
If the guard unreachable_since variable was set, the status "up" was
reported which is wrong. This adds the "down" status followed by the
unreachable_since time value.
Fixes#14184
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
David Goulet finds that when he runs a busy relay for a while with the
latest version of the git code, the number of onionskins handled
slowly dwindles to zero, with total_pending_tasks wedged at its
maximum value.
I conjecture this is because the total_pending_tasks variable isn't
decremented when we successfully cancel a job. Fixed that.
Fixes bug 14741; bugfix not on any released version of tor.
Ordinarily, get_options() can never return NULL, but with
test_status.c mocking, it can. So test for that case.
The best fix here would be to pass the options value to a
bridge_server_mode() function.
After connectivity problems, only try connecting to bridges which
are currently configured; don't mark bridges which we previously
used but are no longer configured. Fixes 14216. Reported by
and fix provided by arma.
It's now possible to use SocksPort or any other kind of port that can use a
Unix socket like so:
SocksPort unix:/foo/bar/unix.sock
Fixes#14451
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Introduces two new circuit status name-value parameters: SOCKS_USERNAME
and SOCKS_PASSWORD. Values are enclosing in quotes and unusual characters
are escaped.
Example:
650 CIRC 5 EXTENDED [...] SOCKS_USERNAME="my_username" SOCKS_PASSWORD="my_password"
Here is why:
1) v0 descriptors are deprecated since 0.2.2.1 and not suppose to be alive
in the network anymore. This function should only serve v2 version for now
as the default.
2) It should return different error code depending on what's the actual
error is. Right now, there is no distinction between a cache entry not found
and an invalid query.
3) This function should NOT test if the intro points are usable or not. This
adds some load on a function that should be "O(1)" and do one job.
Furthermore, multiple callsites actually already test that doing twice the
job...
4) While adding control event, it would be useful to be able to lookup a
cache entry without having it checking the intro points. There are also
places in the code that do want to lookup the cache entry without doing
that.
Fixes#14391
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Also, do a little light refactoring to move some variable declarations
around and make a few things const
Also fix an obnoxious bug on checking for the DONE stream end reason.
It's not a flag; it's a possible value or a variable that needs to be
masked.
Once a NACK is received on the intro circuit, tor tries an other usable one
by extending the current circuit to it. If no more intro points are usable,
now close the circuit. Also, it's reason is changed before closing it so we
don't report again an intro point failure and trigger an extra HS fetch.
Fixes#14224
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Once a NACK is received on the intro circuit, tor tries an other usable one
by extending the current circuit to it. If no more intro points are usable,
now close the circuit.
Fixes#14224
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
This fixes a bug where we'd fetch different replicas of the same
descriptor for a down hidden service over and over, until we got lucky
and fetched the same replica twice in a row.
Fixes bug 14219; bugfix on 0.2.0.10-alpha.
(Patch from Roger; commit message and changes file by Nick.)
We've started to hit the limit here. We introduced the limit in
0.1.2.5-alpha. This fixes bug 14261, but we should have a smarter way
to not actually do the behavior this permits. See #14267 for a ticket
about fixing that.
This incidentally makes unix SocksSocket support all the same options
as SocksPort.
This patch breaks 'SocksSocket 0'; next will restore it.
Resolves 14254.
Previously I used one queue per worker; now I use one queue for
everyone. The "broadcast" code is gone, replaced with an idempotent
'update' operation.
The solution I took is to not free a circuit with a pending
uncancellable work item, but rather to set its magic number to a
sentinel value. When we get a work item, we check whether the circuit
has that magic sentinel, and if so, we free it rather than processing
the reply.
To avoid having diffs turn out too big, I had replaced some unneeded
ifs and fors with if (1), so that the indentation would still work out
right. Now I might as well clean those up.
The trick here is to apply mapaddress first, and only then apply
automapping. Otherwise, the automap checks don't get done.
Fix for bug 7555; bugfix on all versions of Tor supporting both
MapAddress and AutoMap.
There were following problems:
- configure.ac wrongly checked for defined HAVE_SYSTEMD; this
wasn't working, so the watchdog code was not compiled in.
Replace library search with explicit version check
- sd_notify() watchdog call was unsetting NOTIFY_SOCKET from env;
this means only first "watchdog ping" was delivered, each
subsequent one did not have socket to be sent to and systemd
was killing service
- after those fixes, enable Watchdog in systemd unit with one
minute intervals
If running under systemd, send back information when reloading
configuration and gracefully shutting down. This gives administator
more information about current Tor daemon state.
If running under systemd, notify the supervisor about current PID
of Tor daemon. This makes systemd unit simpler and more robust:
it will do the right thing regardless of RunAsDaemon settings.
Check for a missing option value in parse_virtual_addr_network
before asserting on the NULL in tor_addr_parse_mask_ports.
This avoids crashing on torrc lines like Vi[rtualAddrNetworkIPv[4|6]]
when no value follows the option.
Bugfix on 0.2.3 (de4cc126cb on 24 November 2012), fixes#14142.
Drop the MIN_REND_INITIAL_POST_DELAY on a testing network to 5 seconds,
but keep the default at 30 seconds.
Reduces the hidden service bootstrap to 25 seconds from around 45 seconds.
Change the default src/test/test-network.sh delay to 25 seconds.
Closes ticket 13401.
TestingDirAuthVoteHSDir ensures that authorities vote the HSDir flag
for the listed relays regardless of uptime or ORPort connectivity.
Respects the value of VoteOnHidServDirectoriesV2.
Partial fix for bug 14067.
Fixes bug 11454, where we would keep around a superseded descriptor
if the descriptor replacing it wasn't at least a week later. Bugfix
on 0.2.1.8-alpha.
Fixes bug 11457, where a certificate with a publication time in the
future could make us discard existing (and subsequent!) certificates
with correct publication times. Bugfix on 0.2.0.3-alpha.
When I made time parsing more strict, I broke the
EntryGuardDownSince line, which relied on two concatenated ISO times
being parsed as a single time.
Fixes bug 14136. Bugfix on 7984fc1531. Bug not in any released
version of Tor.
Also, avoid crashing when we attempt to double-remove an edge
connection from the DNS resolver: just log a bug warning instead.
Fixes bug 14129. Bugfix on 0d20fee2fb, which was in 0.0.7rc1.
jowr found the bug. cypherpunks wrote the fix. I added the log
message and removed the assert.
"Maybe this time should be reduced, since we are considering
guard-related changes as quite important? It would be a pity to
settle on a guard node, then close the Tor client fast and lose that
information."
Closes 12485.
If we decide not to use a new guard because we want to retry older
guards, only close the locally-originating circuits passing through
that guard. Previously we would close all the circuits.
Fixes bug 9819; bugfix on 0.2.1.1-alpha. Reported by "skruffy".
Have clients and authorities both have new behavior, since the
fix for bug 11243 has gone in. But make clients still accept
accept old bogus HSDir descriptors, to avoid fingerprinting trickery.
Fixes bug 9286.
If we're not a relay, we ignore it.
If it's set to 1, we obey ExitPolicy.
If it's set to 0, we force ExitPolicy to 'reject *:*'
And if it's set to auto, then we warn the user if they're running an
exit, and tell them how they can stop running an exit if they didn't
mean to do that.
Fixes ticket 10067
