Add the TestingDirAuthVoteExit option, a list of nodes to vote Exit for,
regardless of their uptime, bandwidth, or exit policy.
TestingTorNetwork must be set for this option to have any effect.
Works around an issue where authorities would take up to 35 minutes to
give nodes the Exit flag in a test network, despite short consensus
intervals. Partially implements ticket 13161.
This implements the meat of #12899. This commit should simply remove the
parts of Tor dirauths used to check whether a relay was supposed to be
named or not, it doesn't yet convert to a new mechanism for
reject/invalid/baddir/badexiting relays.
This is in preparation for a big patch series removing the entire Naming
system from Tor. In its wake, the approved-routers file is being
deprecated, and a replacement option to allow only pre-approved routers
is not being implemented.
When we merged the cookieauthfile creation logic in 33c3e60a37, we
accidentally took out this feature. Fixes bug 12864, bugfix on
0.2.5.1-alpha.
Also adds an ExtORPortCookieAuthFileGroupReadable, since there's no
reason not to.
I don't know whether we missed these or misclassified them when we
first made the "DIRECTORY AUTHORITY SERVER OPTIONS" section, but they
really belong there.
If we can't detect the physical memory, the new default is 8 GB on
64-bit architectures, and 1 GB on 32-bit architectures.
If we *can* detect the physical memory, the new default is
CLAMP(256 MB, phys_mem * 0.75, MAX_DFLT)
where MAX_DFLT is 8 GB on 64-bit architectures and 2 GB on 32-bit
architectures.
You can still override the default by hand. The logic here is simply
trying to choose a lower default value on systems with less than 12 GB
of physical RAM.
This means that tor can run without needing to communicate with ioctls
to the firewall, and therefore doesn't need to run with privileges to
open the /dev/pf device node.
A new TransProxyType is added for this purpose, "pf-divert"; if the user
specifies this TransProxyType in their torrc, then the pf device node is
never opened and the connection destination is determined with getsockname
(as per pf(4)). The default behaviour (ie., when TransProxyType is "default"
when using the pf firewall) is still to assume that pf is configured with
rdr-to rules.
This isn't on by default; to get it, you need to set "TransProxyType
ipfw". (The original patch had automatic detection for whether
/dev/pf is present and openable, but that seems marginally fragile.)
We are searching @CONFDIR@ before $HOME, but the documentation
implied otherwise.
I screwed this up in f5e86bcd6c, when I
first documented the $HOME/.torrc possibility.
Fix for bug 9213; bugfix on 0.2.3.18-rc.
The build was broken by changes in f8c45339f7, but we didn't
notice, since that commit also made torify.1 only get built when
tor-fw-helper was turned on.
Fixes bug 11321; bugfix on Tor 0.2.5.1-alpha.
In the end this required a slightly nasty hack using a dummy anchor as
an option heading in order to make the "Other recognized __flags__"
line indent properly.
Fixes bug 11061; Bugfix on 61d740ed.
We have ignored any ports listed here since 80365b989 (0.0.7rc1),
but we didn't warn the user that we were ignoring them. This patch
adds a warning if you put explicit ports in any of the options
{Socks,Dir}Policy or AuthDir{Reject,Invalid,BadDir,BadExit}. It
also adjusts the manpage to say that ports are ignored.
Fixes ticket 11108.
These options were added back in 0.1.2.5-alpha, but no longer make any
sense now that all directories support tunneled connections and
BEGIN_DIR cells. These options were on by default; now they are
always-on.
This is a fix for 10849, where TunnelDirConns 0 would break hidden
services -- and that bug arrived, I think, in 0.2.0.10-alpha.
(There is no longer meaningfully any such thing as a HS authority,
since we stopped uploading or downloading v0 hs descriptors in
0.2.2.1-alpha.)
Implements #10881, and part of #10841.
Explicitly include bridges, and note that we archive and publish all
descriptors.
(We are not yet publishing ContactInfo lines contained in bridge
descriptors, but maybe we'll want to do that soon, so let's err on the
side of caution here.)
Related to #9854.
According to the manpage, bridges use P256 for conformity and relays
use P224 for speed. But skruffy points out that we've gotten it
backwards in the code.
In this patch, we make the default P256 for everybody.
Fixes bug 9780; bugfix on 0.2.4.8-alpha.
For now, round down to the nearest 10 minutes. Later, eliminate entirely by
setting a consensus parameter.
(This rounding is safe because, in 0.2.2, where the timestamp mattered,
REND_REPLAY_TIME_INTERVAL was a nice generous 60 minutes.)
This implements "algorithm 1" from my discussion of bug #9072: on OOM,
find the circuits with the longest queues, and kill them. It's also a
fix for #9063 -- without the side-effects of bug #9072.
The memory bounds aren't perfect here, and you need to be sure to
allow some slack for the rest of Tor's usage.
This isn't a perfect fix; the rest of the solutions I describe on
codeable.
doc/TODO and doc/spec/README were placeholders to tell people where to
look for the real TODO and README stuff -- we replaced them years ago,
though.
authority-policy, v3-authority-howto, and torel-design.txt belong in
torspec. I'm putting them in attic there since I think they may be in
large part obsolete, but someone can rescue them if they're not.
translations.txt is outdated, and refers to lots of programs other
than Tor. We have much better translation resources on the website
now.
tor-win32-mingw-creation.txt is pending review of a revised version
for 0.2.5 (see ticket #4520), but there's no reason to ship this one
while we're waiting for an accurate version.
the tor-rpm-creation.txt isn't obsolete AFAIK, but it belongs in
doc/contrib if anywhere.
Resolves bug #8965.
A new option TestingV3AuthVotingStartOffset is added which offsets the
starting time of the voting interval. This is possible only when
TestingTorNetwork is set.
This patch makes run_scheduled_events() check for new consensus
downloads every second when TestingTorNetwork, instead of every
minute. This should be fine, see #8532 for reasoning.
This patch also brings MIN_VOTE_SECONDS and MIN_DIST_SECONDS down from
20 to 2 seconds, unconditionally. This makes sanity checking of
misconfiguration slightly less sane.
Addresses #8532.
- Avoid control_event_refill_global function with 13 arguments and
increase code reuse factor by moving more code from control.c to
connection.c.
- Avoid an unsafe uint32_t -> int cast.
- Add TestingEnableTbEmptyEvent option.
- Prepare functions for testing.
- Rename a few functions and improve documentation.
- Move cell_command_to_string from control.c to command.c.
- Use accessor for global_circuitlist instead of extern.
- Add a struct for cell statistics by command instead of six arrays.
- Split up control_event_circuit_cell_stats by using two helper functions.
- Add TestingEnableCellStatsEvent option.
- Prepare functions for testing.
- Rename a few variables and document a few things better.
Now the manpages no longer refer to tsocks or tsocks.conf, and we no
longer have or ship a tor-tsocks.conf. The only remaining instances
of "tsocks" in our repository are old ChangeLog and ReleaseNotes
entries, and the torify script saying that it doesn't support tsocks.
Fixes bug 8290.
Also, deprecate the torrc options for the scaling values. It's unlikely anyone
but developers will ever tweak them, even if we provided a single ratio value.
Instead of hardcoding the minimum fraction of possible paths to 0.6, we
take it from the user, and failing that from the consensus, and
failing that we fall back to 0.6.
This is ticket 7706, reported by "bugcatcher." The rationale here
is that if somebody says 'ExcludeNodes {tv}', then they probably
don't just want to block definitely Tuvaluan nodes: they also want
to block nodes that have unknown country, since for all they know
such nodes are also in Tuvalu.
This behavior is controlled by a new GeoIPExcludeUnknown autobool
option. With the default (auto) setting, we exclude ?? and A1 if
any country is excluded. If the option is 1, we add ?? and A1
unconditionally; if the option is 0, we never add them.
(Right now our geoip file doesn't actually seem to include A1: I'm
including it here in case it comes back.)
This feature only takes effect if you have a GeoIP file. Otherwise
you'd be excluding every node.
The right way to set "MaxOnionsPending" was to adjust it until the
processing delay was appropriate. So instead, let's measure how long
it takes to process onionskins (sampling them once we have a big
number), and then limit the queue based on its expected time to
finish.
This change is extra-necessary for ntor, since there is no longer a
reasonable way to set MaxOnionsPending without knowing what mix of
onionskins you'll get.
This patch also reserves 1/3 of the onionskin spots for ntor
handshakes, on the theory that TAP handshakes shouldn't be allowed to
starve their speedier cousins. We can change this later if need be.
Resolves 7291.
With an IPv6 virtual address map, we can basically hand out a new
IPv6 address for _every_ address we connect to. That'll be cool, and
will let us maybe get around prop205 issues.
This uses some fancy logic to try to make the code paths in the ipv4
and the ipv6 case as close as possible, and moves to randomly
generated addresses so we don't need to maintain those stupid counters
that will collide if Tor restarts but apps don't.
Also has some XXXX items to fix to make this useful. More design
needed.
This replaces the old FallbackConsensus notion, and should provide a
way -- assuming we pick reasonable nodes! -- to give clients
suggestions of placs to go to get their first consensus.
See #4771 for rationale.
Note that this patch does not take suggested changes in #4470 into
account and keeps treating AuthDirHasIPv6Connectivity as an
AUTOBOOL. Thus, bug fixes for that are included here as well.
This is a fix on master, unreleased as of now.
Add ClientUseIPv6 and ClientPreferIPv6ORPort configuration options.
Use "preferred OR port" for all entry nodes, not only for bridges.
Mark bridges with "prefer IPv6 OR port" if an IPv6 address is
configured in Bridge line and ClientPreferIPv6ORPort is set.
Mark relays with "prefer IPv6 OR port" if an IPv6 address is found in
descriptor and ClientPreferIPv6ORPort is set.
Filter "preferred OR port" through the ClientUseIPv6 config option. We
might want to move this test to where actual connection is being set
up once we have a fall back mechanism in place.
Have only non-servers pick an IPv6 address for the first hop: We
don't want relays to connect over IPv6 yet. (IPv6 has never been used
for second or third hops.)
Implements ticket 5535.
This is important, since otherwise an attacker can use timing info
to probe the internal network.
Also, add an option (ExtendAllowPrivateAddresses) so that
TestingTorNetwork won't break.
Fix for bug 6710; bugfix on all released versions of Tor.
This gives us a few benefits:
1) make -j clean all
this will start working, as it should. It currently doesn't.
2) increased parallel build
recursive make will max out at number of files in a directory,
non-recursive make doesn't have such a limitation
3) Removal of duplicate information in make files,
less error prone
I've also slightly updated how we call AM_INIT_AUTOMAKE, as the way
that was used was not only deprecated but will be *removed* in the next
major automake release (1.13).... so probably best that we can continue
to bulid tor without requiring old automake.
(see http://www.gnu.org/software/automake/manual/html_node/Public-Macros.html )
For more reasons why, see resources such as:
http://miller.emu.id.au/pmiller/books/rmch/
This makes the V=1 or V=0 automake silent build options display (or hide)
the full command line used.
GEN foo.bar
will be seen rather than the full command.
As with all automake silent rules, "make V=1" will output the full command.
This is based on a pair of patches from A. Costa. I couldn't apply
those directly, since they changed the generated *roff files, not
the asciidoc source.
Fixes Tor bug 6500 and Debian bug 683359.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
The defense counts the circuit failure rate for each guard for the past N
circuits. Failure is defined as the ability to complete a first hop, but not
finish completing the circuit all the way to the exit.
If the failure rate exceeds a certain amount, a notice is emitted.
If it exceeds a greater amount, a warn is emitted and the guard is disabled.
These values are governed by consensus parameters which we intend to tune as
we perform experiments and statistical simulations.
Nearly everywhere, we end options with "(Default: foo)". But in a
few places, we inserted an extra period after or before the close
parenthesis, and in a few other places we said "(Defaults to foo)".
Let's not do that.
This feature can make Tor relays less identifiable by their use of the
mod_ssl DH group, but at the cost of some usability (#4721) and bridge
tracing (#6087) regressions.
We should try to turn this on by default again if we find that the
mod_ssl group is uncommon and/or we move to a different DH group size
(see #6088). Before we can do so, we need a fix for bugs #6087 and
Resolves ticket #5598 for now.
make the asciidoc work; make the example more generic; tighten the
prose a little; be more specific that *.example.com matches
example.com; simplify an example.
1. Only allow '*.' in MapAddress expressions. Ignore '*ample.com' and '.example.com'.
This has resulted in a slight refactoring of config_register_addressmaps.
2. Add some more detail to the man page entry for AddressMap.
3. Fix initialization of a pointer to NULL rather than 0.
4. Update the unit tests to cater for the changes in 1 and test more explicitly for
recursive mapping.
1. Implement the following mapping rules:
MapAddress a.b.c d.e.f # This is what we have now
MapAddress .a.b.c d.e.f # Replaces any address ending with .a.b.c with d.e.f
MapAddress .a.b.c .d.e.f # Replaces the .a.b.c at the end of any addr with .d.e.f
(Note that 'a.b.c .d.e.f' is invalid, and will be rejected.)
2. Add tests for the new rules.
3. Allow proper wildcard annotation, i.e. '*.d.e' '.d.e' will still work.
4. Update addressmap_entry_t with an is_wildcard member.
If set to 1, Tor will attempt to prevent basic debugging
attachment attempts by other processes. (Default: 1)
Supports Mac OS X and Gnu/Linux.
Sebastian provided useful feedback and refactoring suggestions.
Signed-off-by: Jacob Appelbaum <jacob@appelbaum.net>
When running a system-wide instance of Tor on Unix-like systems, having
a ControlSocket is a quite handy mechanism to access Tor control
channel. But it would be easier if access to the Unix domain socket can
be granted by making control users members of the group running the Tor
process.
This change introduces a UnixSocketsGroupWritable option, which will
create Unix domain sockets (and thus ControlSocket) 'g+rw'. This allows
ControlSocket to offer same access control measures than
ControlPort+CookieAuthFileGroupReadable.
See <http://bugs.debian.org/552556> for more details.
Clients and relays haven't used them since early 0.2.0.x. The only
remaining use by authorities learning about new relays ahead of scedule;
see proposal 147 for what we intend to do about that.
We're leaving in an option (FetchV2Networkstatus) to manually fetch v2
networkstatuses, because apparently dnsel and maybe bwauth want them.
This fixes bug 3022.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
- Document it in the manpage
- Add a changes entry
- No need to log when it is set: we don't log for other options.
- Use doxygen to document the new flag.
- Test truth of C variables with "if (x)", not "if (x == 1)".
- Simplify a complex boolean expression by breaking it up.
Sets:
* Documentation
* Logging domain
* Configuration option
* Scheduled event
* Makefile
It also creates status.c and the log_heartbeat() function.
All code was written by Sebastian Hahn. Commit message was
written by me (George Kadianakis).
We detect and reject said attempts if there is no chosen exit node or
circuit: connecting to a private addr via a randomly chosen exit node
will usually fail (if all exits reject private addresses), is always
ill-defined (you're not asking for any particular host or service),
and usually an error (you've configured all requests to go over Tor
when you really wanted to configure all _remote_ requests to go over
Tor).
This can also help detect forwarding loop requests.
Found as part of bug2279.
Previously if you wanted to say "All messages except network
messages", you needed to say "[*,~net]" and if you said "[~net]" by
mistake, you would get no messages at all. Now, if you say "[~net]",
you get everything except networking messages.
We need to make sure that the worst thing that a weird consensus param
can do to us is to break our Tor (and only if the other Tors are
reliably broken in the same way) so that the majority of directory
authorities can't pull any attacks that are worse than the DoS that
they can trigger by simply shutting down.
One of these worse things was the cbtnummodes parameter, which could
lead to heap corruption on some systems if the value was sufficiently
large.
This commit fixes this particular issue and also introduces sanity
checking for all consensus parameters.
This was originally a patch provided by pipe
(http://www.mail-archive.com/or-talk@freehaven.net/msg13085.html) to
provide a method for controllers to query the total amount of traffic
tor has handled (this is a frequently requested piece of information
by relay operators).
The spec stated that support for the helper-nodes command would be removed
in 0.1.3.x, however support for this command is still in Tor. Updated the spec
to reflect this and added a node that the command is deprecated.
Several updates to grammars for events and GETINFO results. All relate
to the fact that LongName has replaced ServerID since 0.2.2.1-alpha. See
documentation of VERBOSE_NAMES for more information. The following
grammars were changed:
* orconn-status GETINFO result
* entry-guards GETINFO result
* Path general token
* OR Connection status changed event
* New descriptors available event
In all cases a note was added about when the old grammar applies.
(1) Made the wording of the comments consistant with token names.
Digest/Fingerprint and Name/Nickname were being used interchangeably.
Better to just use Fingerprint and Nickname becuase they are the names
of the tokens.
(2) Places the tokens currently in use before the tokens used in older
versions. ServerSpec should be documented before ServerID.
(3) Added a note to the comments about ServerID that cross reference
the VERBOSE_FEATURE, allowing users to see when and why ServerID was
replaced with LongName.
(1) On by default is a bad way to describe features. Rather, they
are always on and should be viewed as a part of the control
protocol. Updated the wording in USEFEATURE to reflect this.
(2) Made descriptions of Tor versions consistant across all
features. There is the version in which a feature was introduced and
the version in which it became part of the protocol.
(3) Reworded the description of the VERBOSE_NAMES feature. The
previous wording describes the way things used to be first. Better to
lead with the current state of things and then describe how it differs
from old versions.
Having very long single lines with lots and lots of things in them
tends to make files hard to diff and hard to merge. Since our tools
are one-line-at-a-time, we should try to construct lists that way too,
within reason.
This incidentally turned up a few headers in configure.in that we were
for some reason searching for twice.
We decided to no longer ship expert packages for OS X because they're a
lot of trouble to keep maintained and confuse users. For those who want
a tor on OS X without Vidalia, macports is a fine option. Alternatively,
building from source is easy, too.
The polipo stuff that is still required for the Vidalia bundle build can
now be found in the torbrowser repository,
git://git.torproject.org/torbrowser.git.
Instead of rejecting a value that doesn't divide into 1 second, round to
the nearest divisor of 1 second and warn.
Document that the option only controls the granularity written by Tor to a
file or console log. It does not (for example) "batch up" log messages to
affect times logged by a controller, times attached to syslog messages, or
the mtime fields on log files.
Also, make the NodeFamily option into a list of routersets. This
lets us git rid of router_in_nickname_list (or whatever it was
called) without porting it to work with nodes, and also lets people
specify country codes and IP ranges in NodeFamily
* MINIUPNPC rather than the generic UPNP
* Nick suggested a better abstraction model for tor-fw-helper
* Fix autoconf to build with either natpmp or miniupnpc
* Add AM_PROG_CC_C_O to fix automake complaint
* update spec to address nickm's concern
* refactor nat-pmp to match upnp state
* we prefer tor_snprintf to snprintf
* link properlty for tor_snprintf
* rename test_commandline_options to log_commandline_options
* cast this uint as an int
* detect possible FD_SETSIZE errors
* make note about future enhancements for natpmp
* add upnp enhancement note
* ChangeLog entry
* doxygen and check-spaces cleanup
* create tor-fw-helper.1.txt
tor-fw-helper is a command-line tool to wrap and abstract various
firewall port-forwarding tools.
This commit matches the state of Jacob's tor-fw-helper branch as of
23 September 2010.
(commit msg by Nick)
This is needed for IOCP, since telling the IOCP backend about all
your CPUs is a good idea. It'll also come in handy with asn's
multithreaded crypto stuff, and for people who run servers without
reading the manual.
This numbers the proposal to reflect the current discussion on or-dev and irc
This change updates the proposal index to reflect prop 171
This change also includes an update about Nick blessing me as a proposal editor
Proposal 171 is the product of many comments from many contributors including
but not limited to:
Damon McCoy
Linus Nordberg
Nick Matthewson
Robert Hogan
Robert Ransom
Sebastian Hahn
* doc/Makefile.am: Move $(VAR:MOD) expansions inside "if USE_ASCIIDOC".
* doc/Makefile.am: Use proper variable name for text input files.
* doc/Makefile.am: Initialize vars to empty when !USE_ASCIIDOC.
In tor-spec.txt, instead of saying "nodes may X" instead say "Current
nodes do X; this is nonconformant. Clients should watch out for that."
Based on observations by wanoskarnet.
At best, this patch helps us avoid sending queued relayed cells that
would get ignored during the time between when a destroy cell is
sent and when the circuit is finally freed. At worst, it lets us
release some memory a little earlier than it would otherwise.
Fix for bug #1184. Bugfix on 0.2.0.1-alpha.
* doc/Makefile.am: Change $(VAR:MOD) to ${VAR:MOD} -- make(1) on
NetBSD substitutes '$(:x)' to 'x' rather than the empty string. This
bites us in doc/ when configured with `--disable-asciidoc'. Curly
braces should work in all implementations of make(1) but this patch
changes only the places where we use the VAR:MOD expansion.
V3 authorities no longer decide not to vote on Guard+Exit. The bandwidth
weights should take care of this now.
Also, lower the max threshold for WFU to 0.98, to allow more nodes to become
guards.
