On an IPv6 reachability failure test, if the address was configured, don't
publish the descriptor and log warn. If the address was auto discovered, still
publish the descriptor.
Closes#33247.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Enum allows us to easily compare what is being returned but also better
semantic to the code.
Related #33247
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now support IPv4 _and_ IPv6.
This also cleans up nicely the function that was moving IPv4 addresses from
uint32_t to tor_addr_t.
Fixes#40058
Signed-off-by: David Goulet <dgoulet@torproject.org>
In routerconf_find_ipv6_or_ap(), we check if the returned ORPort is internal
but not for listening. This means that IPv6 [::] is considered internal.
Thus, we can't use it, we have to look directly at the configured address and
port and if they are valid, we do consider that we have a valid IPv6 ORPort
and that we can thus extend in IPv6.
Related #33246
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now that tor automatically binds to IPv4 _and_ IPv6, in order to avoid
breaking configurations, we sanitize the parsed lists for duplicate ORPorts.
It is possible to happen because we still allow this configuration;
ORPort 9888
ORPort [4242::1]:9888
Meaning that the first ORPort value will bind to 0.0.0.0:9888 _and_ [::]:9888
which would lead to an error when attempting to bind on [4242::1]:9888.
However, that configuration is accepted today and thus we must not break it.
To remedy, we now sanitize the parsed list and prioritize an ORPort that has
an explicit address over the global one.
A warning is emitted if such configuration pattern is found. This is only for
the ORPort.
Related to #33246
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit makes it that if the ORPort is set with a single port, it will
bind to both global listen IPv4 and IPv6 addresses.
To pin an "ORPort <PORT>" to be IPv4 or IPv6, the IPv4Only/IPv6Only flags are
honored thus this will _only_ bind on IPv6 for that port value:
ORPort 9050 IPv6Only
Results in: [::]:9050
ORPort 9051 IPv4Only
Results in: [0.0.0.0]:9051
Attempting to configure an explicit IPv4 address with IPv6Only flag is an
error and vice versa.
Closes#33246
Signed-off-by: David Goulet <dgoulet@torproject.org>
These now (or_port and dir_port) now have "find" names, since they
look at the portcfg first, then at the actual ports from the
listeners.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
router_get_advertised_or_port routerconf_find_or_port \
router_get_advertised_ipv6_or_ap routerconf_find_ipv6_or_ap \
router_has_advertised_ipv6_orport routerconf_has_ipv6_orport \
router_get_advertised_dir_port routerconf_find_dir_port
Rationale: these don't actually give the first advertised
address/port, but instead give us the first such port that we are
_configured_ to advertise. Putting them in a portconf_ namespace
therefore makes sense.
Similarly, there are no other functions that get the first
configured advertised addr/port, so the "by_type_af()" part is needless.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
get_first_advertised_addr_by_type_af portconf_get_first_advertised_addr \
get_first_advertised_port_by_type_af portconf_get_first_advertised_port
This option controls if a tor relay will attempt address auto discovery and
thus ultimately publish an IPv6 ORPort in the descriptor.
Behavior is from proposal 312 section 3.2.6.
Closes#33245
Signed-off-by: David Goulet <dgoulet@torproject.org>
The ORPort can be IPv4Only which means that even if we can auto discover an
IPv6 address, we should not publish it because it would have an ORPort of 0.
Fixes#40054
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead of a boolean saying "cache_only" add the concept of flags so we add
semantic through out the code and allow ourselves to have more options in the
future.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tell the relay find address interface to only use the cache so we don't
trigger an address resolve everytime the "GETINFO address" is called.
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previous development introduced the error of using 0/1 for a boolean
parameter. Fix that everywhere
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove use of router_pick_published_address() and use
relay_find_addr_to_publish instead.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
At the moment, this command only returns the IPv4. Do so by using the new
relay_find_addr_to_publish().
New commands to return IPv4 and IPv6 will be done with the work in tor#40039.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the new relay_has_address_set() interface when deciding if we need to
fetch directory information from an authority as a relay.
If no IPv4 address is found, we'll proceed with a fetch so we can learn our
address in the HTTP header or NETINFO cell that a trusted authority will send
us back.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tor periodic events have moved to a role base model where relays have specific
events. One of those is to rebuild the descriptor and that is ran every
minute.
This removes the call to router_rebuild_descriptor() from
router_get_my_routerinfo_with_err() because that is the only code path that
can call for a rebuild every second.
Instead, when we mark the descriptor as dirty, immediately reschedule the
descriptor check periodic event so it can be rebuilt that way instead of
randomly when router_get_my_routerinfo_with_err() is called.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a relay builds a new descriptor, use the new relay_find_addr_to_publish()
interface to find the address to publish per family.
This commit also make the check for address consistency to also work for a
configured IPv6 for which before it was IPv4 only.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
In case the transport has no usable address configured (likely 0.0.0.0 or
[::]), attempt to find the IPv4 and on failure, fallback to the IPv6. If none
are found, a log error is emitted and the transport is skiped.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order for a relay to find which address to publish in its descriptor,
router_pick_published_address() is used. However, that function only supports
AF_INET and uses the directory server suggested address discovery mechanism.
This new function uses a new interface so that the caller can request an
address family and get the tor_addr_t object. Furthermore, it drops the use of
directory servers address discovery (tor#33244) and instead uses the new
suggested cache that is populated at the moment from data in the NETINFO cell
coming from the directory authorities.
At this commit, function is unused.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is an automated commit made with a python script.
After running the automated script, I had to hand-revert the cases where it
made the conversion functions call themselves.
Additionally, I had to edit a variable declaration in control_bootstrap.c so
that the result of a const cast could be put in a const field.
Pass the IPv4 before the IPv6 like all our other interfaces.
Changes unreleased code related to #40043.
Closes#40045
Signed-off-by: David Goulet <dgoulet@torproject.org>
This changes a LOT of code but in the end, behavior is the same.
Unfortunately, many functions had to be changed to accomodate but in majority
of cases, to become simpler.
Functions are also removed specifically those that were there to convert an
IPv4 as a host format to a tor_addr_t. Those are not needed anymore.
The IPv4 address field has been standardized to "ipv4_addr", the ORPort to
"ipv4_orport" (currently IPv6 uses ipv6_orport) and DirPort to "ipv4_dirport".
This is related to Sponsor 55 work that adds IPv6 support for relays and this
work is needed in order to have a common interface between IPv4 and IPv6.
Closes#40043.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Fix on unreleased code.
The relay_new_address_suggestion() is called when a NETINFO cell is received
thus not only for relay or bridges.
Remove the BUG() that made sure only in server mode we could handle the
suggested address.
Fixes#40032
Signed-off-by: David Goulet <dgoulet@torproject.org>
