Ian's original message:
The current code actually correctly handles queued data at the
Exit; if there is queued data in a EXIT_CONN_STATE_CONNECTING
stream, that data will be immediately sent when the connection
succeeds. If the connection fails, the data will be correctly
ignored and freed. The problem with the current server code is
that the server currently drops DATA cells on streams in the
EXIT_CONN_STATE_CONNECTING state. Also, if you try to queue data
in the EXIT_CONN_STATE_RESOLVING state, bad things happen because
streams in that state don't yet have conn->write_event set, and so
some existing sanity checks (any stream with queued data is at
least potentially writable) are no longer sound.
The solution is to simply not drop received DATA cells while in
the EXIT_CONN_STATE_CONNECTING state. Also do not send SENDME
cells in this state, so that the OP cannot send more than one
window's worth of data to be queued at the Exit. Finally, patch
the sanity checks so that streams in the EXIT_CONN_STATE_RESOLVING
state that have buffered data can pass.
[...] Here is a simple patch. It seems to work with both regular
streams and hidden services, but there may be other corner cases
I'm not aware of. (Do streams used for directory fetches, hidden
services, etc. take a different code path?)
Right now, we only consider sending stream-level SENDME cells when we
have completely flushed a connection_edge's outbuf, or when it sends
us a DATA cell. Neither of these is ideal for throughput.
This patch changes the behavior so we now call
connection_edge_consider_sending_sendme when we flush _some_ data from
an edge outbuf.
Fix for bug 2756; bugfix on svn r152.
Resolved nontrivial conflict around rewrite_x_address_for_bridge and
learned_bridge_descriptor. Now, since leanred_bridge_descriptor works
on nodes, we must make sure that rewrite_node_address_for_bridge also
works on nodes.
Conflicts:
src/or/circuitbuild.c
Name the magic value "10" rather than re-deriving it.
Comment more.
Use the pattern that works for periodic timers, not the pattern that
doesn't work. ;)
It is important to verify the uptime claim of a relay instead of just
trusting it, otherwise it becomes too easy to blackhole a specific
hidden service. rephist already has data available that we can use here.
Bugfix on 0.2.0.10-alpha.
Partial backport of daa0326aaa .
Resolves bug 2402. Bugfix on 0.2.1.15 (for the part where we switched to
git) and on 0.2.1.30 (for the part where we dumped micro-revisions.)
The calculation of when to send the logmessage was correct, but we
didn't give the correct number of relays required: We want more than
half of all authorities we know about. Fixes bug 2663.
This fixes a remotely triggerable assert on directory authorities, who
don't handle descriptors with ipv6 contents well yet. We will want to
revert this once we're ready to handle ipv6.
Issue raised by lorth on #tor, who wasn't able to use Tor anymore.
Analyzed with help from Christian Fromme. Fix suggested by arma. Bugfix
on 0.2.1.3-alpha.
We want to use the discard port correctly, so a htons() was missing.
Also we need to set it correctly depending on address family.
Review provided by danieldg
SSL_*_app_data uses ex_data index 0, which will be the first one allocated
by SSL_get_ex_new_index. Thus, if we ever started using the ex_data feature
for some other purpose, or a library linked to Tor ever started using
OpenSSL's ex_data feature, Tor would break in spectacular and mysterious
ways. Using the SSL_*_ex_data functions directly now may save us from
that particular form of breakage in the future.
But I would not be surprised if using OpenSSL's ex_data functions at all
(directly or not) comes back to bite us on our backends quite hard. The
specified behaviour of dup_func in the man page is stupid, and
crypto/ex_data.c is a horrific mess.
This should fix a bug that special ran into, where if your state file
didn't record period maxima, it would never decide that it had
successfully parsed itself unless you got lucky with your
uninitialized-variable values.
This patch also tries to improve error messags in the case where a
maximum value legitimately doesn't parse.
In private networks, the defaults for some options are changed. This
means that in options_validate(), where we're testing that the defaults
are what we think they are, we fail. Use a workaround by setting a
hidden configuration option _UsingTestingTorNetwork when we have altered
the configuration this way, so that options_validate() can do the right
thing.
Fixes bug 2250, bugfix on 0.2.1.2-alpha (the version introducing private
network options).
Changed received_netinfo_from_trusted_dir into a
tristate in order to keep track of whether we have
already tried contacting a trusted dir. So we don't
send multiple requests if we get a bunch of skews.
The underlying fix is to stop indicating requests "ns" consensuses by
putting NULL in their requested_resource field: we already had a
specialized meaning for requested_resource==NULL, which was (more or
less) "Treat a failure here as a network failure, since it's too early
to possibly be a resource or directory failure." Overloading the two
meant that very early microdesc consensus download failures would get
treated as ns consensus download failures, so the failure count there
would get incremented, but the microdesc download would get retried
immediately in an infinite loop.
Fix for bug2381. Diagnosed by mobmix.
Sets:
* Documentation
* Logging domain
* Configuration option
* Scheduled event
* Makefile
It also creates status.c and the log_heartbeat() function.
All code was written by Sebastian Hahn. Commit message was
written by me (George Kadianakis).
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
(Backport from 0.2.2's 5ed73e3807)
Patch our implementation of tor_lockfile_lock() to handle this case
correctly. Also add a note that blocking behaviour differs from windows
to *nix. Fixes bug 2504, issue pointed out by mobmix.
rransom noticed that a change of ORPort is just as bad as a change of IP
address from a client's perspective, because both mean that the relay is
not available to them while the new information hasn't propagated.
Change the bug1035 fix accordingly.
Also make sure we don't log a bridge's IP address (which might happen
when we are the bridge authority).
It is often not entirely clear what options Tor was built with, so it
might not be immediately obvious which config file Tor is using when it
found one. Log the config file at startup.
When calling circuit_build_times_shuffle_and_store_array, we were
passing a uint32_t as an int. arma is pretty sure that this can't
actually cause a bug, because of checks elsewhere in the code, but
it's best not to pass a uint32_t as an int anyway.
Found by doorss; fix on 0.2.2.4-alpha.
We detect and reject said attempts if there is no chosen exit node or
circuit: connecting to a private addr via a randomly chosen exit node
will usually fail (if all exits reject private addresses), is always
ill-defined (you're not asking for any particular host or service),
and usually an error (you've configured all requests to go over Tor
when you really wanted to configure all _remote_ requests to go over
Tor).
This can also help detect forwarding loop requests.
Found as part of bug2279.
Left circuit_build_times_get_bw_scale() uncommented because it is in the wrong
place due to an improper bug2317 fix. It needs to be moved and renamed, as it
is not a cbt parameter.
To quote arma: "So instead of stopping your CBT from screaming, you're just
going to throw it in the closet and hope you can't hear it?"
Yep. The log message can happen because at 95% point on the curve, we can be
way beyond the max timeout we've seen, if the curve has few points and is
shallow.
Also applied Nick's rule of thumb for rewriting some other notice log messages
to read like how you would explain them to a raving lunatic on #tor who was
shouting at you demanding what they meant. Hopefully the changes live up to
that standard.
If we got a signed digest that was shorter than the required digest
length, but longer than 20 bytes, we would accept it as long
enough.... and then immediately fail when we want to check it.
Fixes bug 2409; bug in 0.2.2.20-alpha; found by piebeer.
Previously if you wanted to say "All messages except network
messages", you needed to say "[*,~net]" and if you said "[~net]" by
mistake, you would get no messages at all. Now, if you say "[~net]",
you get everything except networking messages.
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
When we stopped using svn, 0.2.1.x lost the ability to notice its svn
revision and report it in the version number. However, it kept
looking at the micro-revision.i file... so if you switched to master,
built tor, then switched to 0.2.1.x, you'd get a micro-revision.i file
from master reported as an SVN tag. This patch takes out the "include
the svn tag" logic entirely.
Bugfix on 0.2.1.15-rc; fixes bug 2402.
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
We need to make sure that the worst thing that a weird consensus param
can do to us is to break our Tor (and only if the other Tors are
reliably broken in the same way) so that the majority of directory
authorities can't pull any attacks that are worse than the DoS that
they can trigger by simply shutting down.
One of these worse things was the cbtnummodes parameter, which could
lead to heap corruption on some systems if the value was sufficiently
large.
This commit fixes this particular issue and also introduces sanity
checking for all consensus parameters.
Our public key functions assumed that they were always writing into a
large enough buffer. In one case, they weren't.
(Incorporates fixes from sebastian)
In dnsserv_resolved(), we carefully made a nul-terminated copy of the
answer in a PTR RESOLVED cell... then never used that nul-terminated
copy. Ouch.
Surprisingly this one isn't as huge a security problem as it could be.
The only place where the input to dnsserv_resolved wasn't necessarily
nul-terminated was when it was called indirectly from relay.c with the
contents of a relay cell's payload. If the end of the payload was
filled with junk, eventdns.c would take the strdup() of the name [This
part is bad; we might crash there if the cell is in a bad part of the
stack or the heap] and get a name of at least length
495[*]. eventdns.c then rejects any name of length over 255, so the
bogus data would be neither transmitted nor altered.
[*] If the name was less than 495 bytes long, the client wouldn't
actually be reading off the end of the cell.
Nonetheless this is a reasonably annoying bug. Better fix it.
Found while looking at bug 2332, reported by doorss. Bugfix on
0.2.0.1-alpha.
The C standard says that INT32_MAX is supposed to be a signed
integer. On platforms that have it, we get the correct
platform-defined value. Our own replacement, however, was
unsigned. That's going to cause a bug somewhere eventually.
Previously, we only looked at up to 128 bytes. This is a bad idea
since socks messages can be at least 256+x bytes long. Now we look at
up to 512 bytes; this should be enough for 0.2.2.x to handle all valid
SOCKS messages. For 0.2.3.x, we can think about handling trickier
cases.
Fixes 2330. Bugfix on 0.2.0.16-alpha.
Right now, Tor routers don't save the maxima values from the
bw_history_t between sessions. That's no good, since we use those
values to determine bandwidth. This code adds a new BWHist.*Maximum
set of values to the state file. If they're not present, we estimate
them by taking the observed total bandwidth and dividing it by the
period length, which provides a lower bound.
This should fix bug 1863. I'm calling it a feature.
Previously, our state parsing code would fail to parse a bwhist
correctly if the Interval was anything other than the default
hardcoded 15 minutes. This change makes the parsing less incorrect,
though the resulting history array might get strange values in it if
the intervals don't match the one we're using. (That is, if stuff was
generated in 15 minute intervals, and we read it into an array that
expects 30 minute intervals, we're fine, since values can be combined
pairwise. But if we generate data at 30 minute intervals and read it
into 15 minute intervals, alternating buckets will be empty.)
Bugfix on 0.1.1.11-alpha.
The trick of looping from i=0..4 , switching on i to set up some
variables, then running some common code is much better expressed by
just calling a function 4 times with 4 sets of arguments. This should
make the code a little easier to follow and maintain here.
An object, you'll recall, is something between -----BEGIN----- and
-----END----- tags in a directory document. Some of our code, as
doorss has noted in bug 2352, could assert if one of these ever
overflowed SIZE_T_CEILING but not INT_MAX. As a solution, I'm setting
a maximum size on a single object such that neither of these limits
will ever be hit. I'm also fixing the INT_MAX checks, just to be sure.
When using libevent 2, we use evdns_base_resolve_*(). When not, we
fake evdns_base_resolve_*() using evdns_resolve_*().
Our old check was looking for negative values (like libevent 2
returns), but our eventdns.c code returns 1. This code makes the
check just test for nonzero.
Note that this broken check was not for _resolve_ failures or even for
failures to _launch_ a resolve: it was for failures to _create_ or
_encode_ a resolve request.
Bug introduced in 81eee0ecfff3dac1e9438719d2f7dc0ba7e84a71; found by
lodger; uploaded to trac by rransom. Bug 2363. Fix on 0.2.2.6-alpha.
This was originally a patch provided by pipe
(http://www.mail-archive.com/or-talk@freehaven.net/msg13085.html) to
provide a method for controllers to query the total amount of traffic
tor has handled (this is a frequently requested piece of information
by relay operators).
C99 allows a syntax for structures whose last element is of
unspecified length:
struct s {
int elt1;
...
char last_element[];
};
Recent (last-5-years) autoconf versions provide an
AC_C_FLEXIBLE_ARRAY_MEMBER test that defines FLEXIBLE_ARRAY_MEMBER
to either no tokens (if you have c99 flexible array support) or to 1
(if you don't). At that point you just use offsetof
[STRUCT_OFFSET() for us] to see where last_element begins, and
allocate your structures like:
struct s {
int elt1;
...
char last_element[FLEXIBLE_ARRAY_MEMBER];
};
tor_malloc(STRUCT_OFFSET(struct s, last_element) +
n_elements*sizeof(char));
The advantages are:
1) It's easier to see which structures and elements are of
unspecified length.
2) The compiler and related checking tools can also see which
structures and elements are of unspecified length, in case they
wants to try weird bounds-checking tricks or something.
3) The compiler can warn us if we do something dumb, like try
to stack-allocate a flexible-length structure.
We were not decrementing "available" every time we did
++next_virtual_addr in addressmap_get_virtual_address: we left out the
--available when we skipped .00 and .255 addresses.
This didn't actually cause a bug in most cases, since the failure mode
was to keep looping around the virtual addresses until we found one,
or until available hit zero. It could have given you an infinite loop
rather than a useful message, however, if you said "VirtualAddrNetwork
127.0.0.255/32" or something broken like that.
Spotted by cypherpunks
We were decrementing "available" twice for each in-use address we ran
across. This would make us declare that we ran out of virtual
addresses when the address space was only half full.
