When trying to find our address to publish, we would log notice if we couldn't
find it from the cache but then we would look at the suggested cache (which
contains the address from the authorities) in which we might actually have the
address.
Thus that log notice was misplaced. Move it down after the suggested address
cache lookup.
Closes#40300
Signed-off-by: David Goulet <dgoulet@torproject.org>
This is unfortunately massive but both functionalities were extremely
intertwined and it would have required us to actually change the HSv2 code in
order to be able to split this into multiple commits.
After this commit, there are still artefacts of v2 in the code but there is no
more support for service, intro point and HSDir.
The v2 support for rendezvous circuit is still available since that code is
the same for the v3 and we will leave it in so if a client is able to
rendezvous on v2 then it can still transfer traffic. Once the entire network
has moved away from v2, we can remove v2 rendezvous point support.
Related to #40266
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now that exit relays don't allow exit connections to directory authority
DirPorts, the follow-up step is to make directory authorities stop doing
DirPort reachability checks.
Fixes#40287
Signed-off-by: David Goulet <dgoulet@torproject.org>
We were just looking at the family which is not correct because it is possible
to have two explicit ORPort for the same family but different addresses. One
example is:
ORPort 127.0.0.1:9001 NoAdvertise
ORPort 1.2.3.4:9001 NoListen
Thus, this patch now ignores ports that have different addresses iff they are
both explicits. That is, if we have this example, also two different
addresses:
ORPort 9001
ORPort 127.0.0.1:9001 NoAdvertise
The first one is implicit and second one is explicit and thus we have to
consider them for removal which in this case would remove the "ORPort 9001" in
favor of the second port.
Fixes#40289
Signe-off-by: David Goulet <dgoulet@torproject.org>
That comes from 685c4866ac which added that
check correctly except for when we build a descriptor.
We already omit the IPv6 address, if we need to, when we encode the descriptor
but we need to keep the actual discovered address in the descriptor so we can
notice future IP changes and be able to assess that we are not publishable as
long as we don't specifically set the omit flag.
This lead to also having tor noticing that our IP changed from <nothing> (no
IPv6 in the descriptor) to a discovered one which would trigger every minute.
Fixes#40279, #40288
Signed-off-by: David Goulet <dgoulet@torproject.org>
In two instances we must look at this flag:
1. When we build the descriptor so the IPv6 is NOT added to the descriptor in
case we judge that we need to omit the address but still publish.
2. When we are deciding if the descriptor is publishable. This flags tells us
that the IPv6 was not found reachable but we should still publish.
Fixes#40279
Signed-off-by: David Goulet <dgoulet@torproject.org>
Everytime we try to discover an address we want to publish, emit a log notice
if we are unable to find it even though an ORPort was configured for it.
Because the function can be called quite often, we rate limit that notice to
every hour so it gets annoying just enough so the operator fixes that.
Related to #40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
We would before do an address discovery and then a lookup in the cache if not
found which is now simplified by calling relay_find_addr_to_publish() directly
which does all those combined.
Furthermore, by doing so, we won't trigger an address discovery every minute
if we have no ORPort configured for the family.
Fixes#40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now that relay_find_addr_to_publish() checks if we actually have an ORPort, we
can simplify the descriptor building phase for IPv6.
This also avoid triggering an IPv6 discovery if the IPv4 can't be found in the
first place.
Related to #40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
In other words, if we don't have an ORPort configured for a specific family
(IPv4/v6), we don't bother doing address discovery.
Related to #40254
Signed-off-by: David Goulet <dgoulet@torproject.org>
We used to actually discard ORPorts that were the same port and same family
but they could have different address.
Instead, we need to keep all different ORPorts so we can bind a listener on
each of them. We will publish only one of these in our descriptor though.
Related to #40246
Signed-off-by: David Goulet <dgoulet@torproject.org>
We can end up trying to find our address from an authority while we don't have
yet its descriptor.
In this case, don't BUG() and just come back later.
Closes#40231
Signed-off-by: David Goulet <dgoulet@torproject.org>
In case building the descriptor would fail, we could still flag that we did in
fact publish the descriptors leading to no more attempt at publishing it which
in turn makes the relay silent for some hours and not try to rebuild the
descriptor later.
This has been spotted with #40231 because the operator used a localhost
address for the ORPort and "AssumeReachable 1" leading to this code path where
the descriptor failed to build but all conditions to "can I publish" were met.
Related to #40231
Signed-off-by: David Goulet <dgoulet@torproject.org>
The previous parser only considered stats files _starting_ with the
timestamp tag, not stats files having the timestamp tag in a later
position. While this applies to all current stats files, a future
stats file might look differently. Better to fix the function now than
be surprised in another 9 years from now.
This commit also adds a test case for such future stats, and it fixes
stats file paths in newly added unit tests.
It turns out that 9 years ago, we stopped appending data into stats file and
rather overwrite everytime we have new stats (see commit
a6a127c833)
The load_stats_file() function was still thinking that we could have the same
line many times in the file which turns out to be false since 9 years ago.
However, that did not cause problem until IPv6 connection stats came along
which introduced a new line in conn-stats: "ipv6-conn-bi-direct ...".
Before, that file contained a single line starting with the tag
"conn-bi-direct". That very tag appears also in the IPv6 tag (see above) so
the load_stats_file() function would consider that the IPv6 line as the last
tag to be appeneded to the file and fail to report the line above (for IPv4).
It would actually truncate the IPv6 line and report it (removing the "ipv6-"
part).
In other words, "conn-bi-direct" was not reported and instead
"ipv6-conn-bi-direct" was used without the "ipv6-" part.
This commit refactors the entire function so that now it looks for a
"timestamp tag" to validate and then if everything is fine, returns the entire
content of the file. The refactor simplifies the function, adds logging in
case of failures and modernize it in terms of coding standard.
Unit tests are also added that makes sure the loaded content matches the
entire file if timestamp validation passes.
Fixes#40226
Signed-off-by: David Goulet <dgoulet@torproject.org>
The function in charge of removing duplicate ORPorts from our configured ports
was skipping all non ORPorts port but only for the outer loop thus resulting
in comparing an ORPort with a non-ORPort which lead to problems.
For example, tor configured with the following would fail:
ORPort auto
DirPort auto
Both end up being the same configuration except that one is a OR listener and
one is a Dir listener. Thus because of the missing check in the inner loop,
they looked exactly the same and thus one is removed.
Fixes#40195
Signed-off-by: David Goulet <dgoulet@torproject.org>
First, this commit moves the launch_dummy_circuit_as_needed() function into
relay_find_addr.c and renames it to relay_addr_learn_from_dirauth(). This is
an attempt to centralize anything relate with address discovery in the right
module.
Second, when building a descriptor and we fail to discover our address,
immediately launch a dummy circuit to an authority in an attempt to learn our
descriptor.
It is still only done every 20 minutes even though the descriptor build is
done every minute. We ought to avoid load on the authority and if we can't
learn in the first place our address from them, chances are more things are
wrong.
Related to #40071
Signed-off-by: David Goulet <dgoulet@torproject.org>
Regularly, tor looks if its IP has changed. It does the entire auto discovery
process again. However, it is possible that it does not find anything.
Instead of thinking the IP changed to an unknown address, look at our cache
and see if that value has changed.
The reason for this is because if tor gets its address as a suggestion from a
directory authority, it is because the auto discovery failed and thus that
address should be consider for the IP change check.
Related to #40071
Signed-off-by: David Goulet <dgoulet@torproject.org>
Commit c3a0f75796 added this feature for ORPort
that we ignore any port that is not the family of our default address when
parsing the port. So if port_parse_config() was called with an IPv4 default
address, all IPv6 address would be ignored.
That makes sense for ORPort since we call twice port_parse_config() for
0.0.0.0 and [::] but for the rest of the ports, it is not good since a
perfectly valid configuration can be:
SocksPort 9050
SocksPort [::1]:9050
Any non-ORPort only binds by default to an IPv4 except the ORPort that binds
to both IPv4 and IPv6 by default.
The fix here is to always parse all ports within port_parse_config() and then,
specifically for ORPort, remove the duplicates or superseding ones. The
warning is only emitted when a port supersedes another.
A unit tests is added to make sure SocksPort of different family always exists
together.
Fixes#40183
Signed-off-by: David Goulet <dgoulet@torproject.org>
Typos found with codespell.
Please keep in mind that this should have impact on actual code
and must be carefully evaluated:
src/core/or/lttng_circuit.inc
- ctf_enum_value("CONTROLER", CIRCUIT_PURPOSE_CONTROLLER)
+ ctf_enum_value("CONTROLLER", CIRCUIT_PURPOSE_CONTROLLER)
