In this patch we lower the log level of the failures for the three calls
to unlink() in networkstatus_set_current_consensus(). These errors might
trigger on Windows because the memory mapped consensus file keeps the
file in open state even after we have close()'d it. Windows will then
error on the unlink() call with a "Permission denied" error.
The consequences of ignoring these errors is that we leave an unused
file around on the file-system, which is an easier way to fix this
problem right now than refactoring networkstatus_set_current_consensus().
See: https://bugs.torproject.org/29930
When releasing OpenSSL patch-level maintenance updates,
we do not want to rebuild binaries using it.
And since they guarantee ABI stability, we do not have to.
Without this patch, warning messages were produced
that confused users:
https://bugzilla.opensuse.org/show_bug.cgi?id=1129411
Fixes bug 30190; bugfix on 0.2.4.2-alpha commit 7607ad2bec
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
Previously, our use of abort() would break anywhere that we didn't
include stdlib.h. This was especially troublesome in case where
tor_assert_nonfatal() was used with ALL_BUGS_ARE_FATAL, since that
one seldom gets tested.
As an alternative, we could have just made this header include
stdlib.h. But that seems bloaty.
Fixes bug 30189; bugfix on 0.3.4.1-alpha.
Fixes bug 29922; bugfix on 0.2.9.3-alpha when we tried to capture
all these warnings. No need to backport any farther than 0.3.5,
though -- these warnings don't cause test failures before then.
This one was tricky to find because apparently it only happened on
_some_ windows builds.
In current NSS versions, these ciphersuites don't work with
SSL_ExportKeyingMaterial(), which was causing relays to fail when
they tried to negotiate the v3 link protocol authentication.
Fixes bug 29241; bugfix on 0.4.0.1-alpha.
When classifying a client's selection of TLS ciphers, if the client
ciphers are not yet available, do not cache the result. Previously,
we had cached the unavailability of the cipher list and never looked
again, which in turn led us to assume that the client only supported
the ancient V1 link protocol. This, in turn, was causing Stem
integration tests to stall in some cases. Fixes bug 30021; bugfix
on 0.2.4.8-alpha.
When we fixed 28614, our answer was "if we failed to load the
consensus on windows and it had a CRLF, retry it." But we logged
the failure at "warn", and we only logged the retry at "info".
Now we log the retry at "notice", with more useful information.
Fixes bug 30004.
Previously we used time(NULL) to set the Expires: header in our HTTP
responses. This made the actual contents of that header untestable,
since the unit tests have no good way to override time(), or to see
what time() was at the exact moment of the call to time() in
dircache.c.
This gave us a race in dir_handle_get/status_vote_next_bandwidth,
where the time() call in dircache.c got one value, and the call in
the tests got another value.
I'm applying our regular solution here: using approx_time() so that
the value stays the same between the code and the test. Since
approx_time() is updated on every event callback, we shouldn't be
losing any accuracy here.
Fixes bug 30001. Bug introduced in fb4a40c32c4a7e5; not in any
released Tor.
Let's use the same function exit point for BUG() codepath that we're using
for every other exit condition. That way, we're not forgetting to clean up
the memarea.
Previously, or_connection_t did not record whether or not the
connection uses a pluggable transport. Instead, it stored the
underlying proxy protocol of the pluggable transport in
proxy_type. This made bootstrap reporting treat pluggable transport
connections as plain proxy connections.
Store a separate bit indicating whether a pluggable transport is in
use, and decode this during bootstrap reporting.
Fixes bug 28925; bugfix on 0.4.0.1-alpha.
When NULL is given to lpApplicationName we enable Windows' "magical"
path interpretation logic, which makes Tor 0.4.x behave in the same way
as previous Tor versions did when it comes to executing binaries in
different system paths.
For more information about this have a look at the CreateProcessA()
documentation on MSDN -- especially the string interpretation example is
useful to understand this issue.
This bug was introduced in commit bfb94dd2ca.
See: https://bugs.torproject.org/29874
so that the relays that would be "excluded" from the bandwidth
file because of something failed can be included to diagnose what
failed, without still including these relays in the bandwidth
authorities vote.
Closes#29806.
The previous commit introduces these changes:
Stop warning about undefined behavior in the probability distribution
tests. Float division by zero may technically be undefined behaviour in
C, but it's well-defined in IEEE 754.
Partial backport of 29298.
Closes ticket 29527; bugfix on 0.4.0.1-alpha.
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
Refactor the shared random state's memory management so that it actually
takes ownership of the shared random value pointers.
Fixes bug 29706; bugfix on 0.2.9.1-alpha.
Stop leaking parts of the shared random state in the shared-random unit
tests. The previous fix in 29599 was incomplete.
Fixes bug 29706; bugfix on 0.2.9.1-alpha.
Turns out that when reloading a tor configured with hidden service(s), we
weren't copying all the needed information between the old service object to
the new one.
For instance, the desc_is_dirty timestamp wasn't which could lead to the
service uploading its descriptor much later than it would need to.
The replaycache wasn't also moved over and some intro point information as
well.
Fixes#23790
Signed-off-by: David Goulet <dgoulet@torproject.org>
This commit also explicitly set the value of the PRT enum so we can match/pin
the C enum values to the Rust one in protover/ffi.rs.
Fixes#29631
Signed-off-by: David Goulet <dgoulet@torproject.org>
Prior to #23100, we were not counting HS circuit build times in our
calculation of the timeout. This could lead to a condition where our timeout
was set too low, based on non HS circuit build times, and then we would
abandon all HS circuits, storing no valid timeouts in the histogram.
This commit avoids the assert.
When "auto" was used for the port number for a listening socket, the
message logged after opening the socket would incorrectly say port 0
instead of the actual port used.
Fixes bug 29144; bugfix on 0.3.5.1-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Skip the Appveyor 32-bit Windows Server 2016 job, and 64-bit Windows
Server 2012 R2 job. The remaining 2 jobs still provide coverage of
64/32-bit, and Windows Server 2016/2012 R2.
Also set fast_finish, so failed jobs terminate the build immediately.
Fixes bug 29601; bugfix on 0.3.5.4-alpha.
This patch fixes a crash bug (assertion failure) in the PT subsystem
that could get triggered if the user cancels bootstrap via the UI in
TorBrowser. This would cause Tor to call `managed_proxy_destroy()` which
called `process_free()` after it had called `process_terminate()`. This
leads to a crash when the various process callbacks returns with data
after the `process_t` have been freed using `process_free()`.
We solve this issue by ensuring that everywhere we call
`process_terminate()` we make sure to detach the `managed_proxy_t` from
the `process_t` (by calling `process_set_data(process, NULL)`) and avoid
calling `process_free()` at all in the transports code. Instead we just
call `process_terminate()` and let the process exit callback in
`managed_proxy_exit_callback()` handle the `process_free()` call by
returning true to the process subsystem.
See: https://bugs.torproject.org/29562
When IPv4Only (IPv6Only) was used but the address could not be
interpreted as a IPv4 (IPv6) address, the error message referred
to the wrong IP version.
This also fixes up the error-checking logic so it's more precise
about what's being checked.
Fixes bug 13221; bugfix on 0.2.3.9-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
KIST works by computing how much should be allowed to write to the kernel for
a given socket, and then it writes that amount to the outbuf.
The problem is that it could be possible that the outbuf already has lots of
data in it from a previous scheduling round (because the kernel is full/busy
and Tor was not able to flush the outbuf yet). KIST ignores that the outbuf
has been filling (is above its "highwater") and writes more anyway. The end
result is that the outbuf length would exceed INT_MAX, hence causing an
assertion error and a corresponding "Bug()" message to get printed to the
logs.
This commit makes it for KIST to take into account the outbuf length when
computing the available space.
Bug found and patch by Rob Jansen.
Closes#29168. TROVE-2019-001.
Signed-off-by: David Goulet <dgoulet@torproject.org>
malloc_options needs to be declared extern (and declaring it extern
means we need to initialize it separately)
Fixes bug 29145; bugfix on 0.2.9.3-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
It was looking for object files made with the old automake
directorations, but those changed when we split up our libraries.
Fixes bug 29435; bugfix on 0.3.5.1-alpha.
