src/test/test_policy.c:
Merged calls to policies_parse_exit_policy by adding additional arguments.
fixup to remaining instance of ~EXIT_POLICY_IPV6_ENABLED.
Compacting logic test now produces previous list length of 4, corrected this.
src/config/torrc.sample.in:
src/config/torrc.minimal.in-staging:
Merged torrc modification dates in favour of latest.
Log an info-level message containing the reject line added to the
exit policy for each local IP address blocked by ExitPolicyRejectPrivate:
- Published IPv4 and IPv6 addresses
- Publicly routable IPv4 and IPv6 interface addresses
ExitPolicyRejectPrivate now rejects more local addresses by default:
* the relay's published IPv6 address (if any), and
* any publicly routable IPv4 or IPv6 addresses on any local interfaces.
This resolves a security issue for IPv6 Exits and multihomed Exits that
trust connections originating from localhost.
Resolves ticket 17027. Patch by "teor".
Patch on 42b8fb5a15 (11 Nov 2007), released in 0.2.0.11-alpha.
In previous versions of Tor, ExitPolicy accept6/reject6 * produced
policy entries for IPv4 and IPv6 wildcard addresses.
To reduce operator confusion, change accept6/reject6 * to only produce
an IPv6 wildcard address.
Resolves bug #16069.
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
Tor now warns when ExitPolicy lines occur after accept/reject *:*
or variants. These lines are redundant, and were always ignored.
Partial fix for ticket 16069. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
When parsing torrc ExitPolicies, we now warn if:
* an IPv4 address is used on an accept6 or reject6 line. The line is
ignored, but the rest of the policy items in the list are used.
(accept/reject continue to allow both IPv4 and IPv6 addresses in torrcs.)
* a "private" address alias is used on an accept6 or reject6 line.
The line filters both IPv4 and IPv6 private addresses, disregarding
the 6 in accept6/reject6.
When parsing torrc ExitPolicies, we now issue an info-level message:
* when expanding an accept/reject * line to include both IPv4 and IPv6
wildcard addresses.
In each instance, usage advice is provided to avoid the message.
Partial fix for ticket 16069. Patch by "teor".
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
When validating a new descriptor against our rend cache failure, we were
added the failure entry to the new cache entry without duplicating. It was
then freed just after the validation ending up in a very bad memory state
that was making tor abort(). To fix this, a dup function has been added and
used just before adding the failure entry.
Fixes#17041
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
No functional changes, but since NoKeepAliveIsolateSOCKSAuth isn't
part of isoflag, it should be checked where all other similar options
are, and bypass the (no-op) masking at the end.
This controls the circuit dirtyness reset behavior added for Tor
Browser's user experience fix (#15482). Unlike previous iterations
of this patch, the tunable actually works, and is documented.
When this is set, and Tor is running as a relay, it will not
generate or load its secret identity key. You can manage the secret
identity key with --keygen. Implements ticket 16944.
In a nutshell, since a circuit can not exit at its entry point, it's very
easy for an attacker to find the hidden service guard if only one EntryNodes
is specified since for that guard, the HS will refuse to build a rendezvous
circuit to it.
For now, the best solution is to stop tor to allow a single EntryNodes for
an hidden service.
Fixes#14917
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
Only applies to connections with SOCKS auth set, so that non-web Tor
activity is not affected.
Simpler version of Nick's patch because the randomness worried me, and I'm not
otherwise sure why we want a max here.
In validate_recommended_package_line, at this point in the function,
n_entries is always >= 1. Coverity doesn't like us checking it for
0.
CID 1268063.
We used to use this when we had some controllers that would accept
long names and some that wouldn't. But it's been obsolete for a
while, and it's time to strip it out of the code.
Previously we'd put these strings right on the controllers'
outbufs. But this could cause some trouble, for these reasons:
1) Calling the network stack directly here would make a huge portion
of our networking code (from which so much of the rest of Tor is
reachable) reachable from everything that potentially generated
controller events.
2) Since _some_ events (EVENT_ERR for instance) would cause us to
call connection_flush(), every control_event_* function would
appear to be able to reach even _more_ of the network stack in
our cllgraph.
3) Every time we generated an event, we'd have to walk the whole
connection list, which isn't exactly fast.
This is an attempt to break down the "blob" described in
http://archives.seul.org/tor/dev/Mar-2015/msg00197.html -- the set of
functions from which nearly all the other functions in Tor are
reachable.
Closes ticket 16695.
Make it easier to unit test TestingDirAuthVote{Exit,Guard,HSDir}
by refactoring the code which sets flags based on them into a
new function dirserv_set_routerstatus_testing.
"option to prevent guard,exit,hsdir flag assignment"
"A node will never receive the corresponding flag unless
that node is specified in the
TestingDirAuthVote{Exit,Guard,HSDir} list, regardless of
its uptime, bandwidth, exit policy, or DirPort".
Patch modified by "teor": VoteOnHidServDirectoriesV2
is now obsolete, so TestingDirAuthVoteHSDir always
votes on HSDirs.
Closes ticket 14882. Patch by "robgjansen".
Commit message and changes file by "teor"
with quotes from "robgjansen".
Fix an error in the manual page and comments for
TestingDirAuthVoteHSDir, which suggested that a
HSDir required "ORPort connectivity". While this is true,
it is in no way unique to the HSDir flag. Of all the flags,
only HSDirs need a DirPort configured in order for the
authorities to assign that particular flag.
Fixed as part of 14882. Patch by "teor".
Bugfix on 0.2.6.3 (f9d57473e1 on 10 January 2015).
* FIXES#16823: https://bugs.torproject.org/16823
If an OP were to send a CREATE_FAST cell to an OR, and that
CREATE_FAST cell had unparseable key material, then tor_free() would
be called on the create cell twice. This fix removes the second
(conditional on the key material being bad) call to tor_free(), so
that now the create cell is always freed once, regardless of the status of
the key material.
(This isn't actually a double-free bug, since tor_free() sets its
input to NULL, and has no effect when called with input NULL.)
Instead of having it call update_all_descriptor_downloads and
update_networkstatus_downloads directly, we can have it cause them to
get rescheduled and called from run_scheduled_events.
Closes ticket 16789.
When fetching a descriptor, we know test every introduction points in it
against our rend failure cache to know if we keep it or not. For this to
work, now everytime an introduction points is discareded (ex: receiving a
NACK), we note it down in our introduction cache.
See rendcache.c for a detailed explanation of the cache's behavior.
Fixes#16389
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When we removed Running/Valid checks from Fast and Stable in 8712, I
removed them from HSDir too, which apparently wasn't a good idea.
Reverts part of a65e835800. Fixes bug 16524. Bugfix
on 0.2.7.2-alpha.
microdesc_free_() called get_microdesc_cache(), which had the fun
side-effect of potentially reloading the whole cache from disk.
Replace it with a variant that doesn't.
The base64 and base32 functions used to be in crypto.c;
crypto_format.h had no header; some general-purpose functions were in
crypto_curve25519.c.
This patch makes a {crypto,util}_format.[ch], and puts more functions
there. Small modules are beautiful!
The control port was using set_max_file_descriptors() with a limit set to 0
to query the number of maximum socket Tor can use. With the recent changes
to that function, a check was introduced to make sure a user can not set a
value below the amount we reserved for non socket.
This commit adds get_max_sockets() that returns the value of max_sockets so
we can stop using that "setter" function to get the current value.
Finally, the dead code is removed that is the code that checked for limit
equal to 0. From now on, set_max_file_descriptors() should never be used
with a limit set to 0 for a valid use case.
Fixes#16697
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
