introduce an authdir_mode() macro to match the others.
don't initialize uptime to the number of seconds since 1970.
non-authoritative dirservers don't cache their directory on disk.
make only authdirservers use clique_mode.
only read approved-routers file if you're an authdirserver.
even authdirservers fetch a new directory in do_hup.
retry_all_connections() is now called retry_all_listeners().
router_parse_list_from_string() correctly reports the router number
it's working on.
only call dirserv_add_own_fingerprint() and
dirserv_add_descriptor() on startup if we're an authdirserver.
if AuthDir and !ORPort then fail.
if AuthDir and ClientOnly then fail.
svn:r2061
now we do.
but i'm not sure it matters, since we also poll for reads, and if
there's an error with the connecting socket, poll is supposed to
return readable, so we should notice it then.
who knows.
svn:r2057
bugfix: actually complain if we duplicate mark-for-close a circuit
add more logging for relay ends that claim dns resolve failed, so we can
find out why they're not being retried.
svn:r1798
choose an intro point, connect to it,
choose a rend point, connect to it and establish a cookie,
get an ack from the rendezvous point,
and know when both circs are ready for her.
APConns don't use conn->purpose anymore
don't initiate a renddesc lookup if one is already in progress
also fix a buffer overflow in nickname parsing (only exploitable
by the operator though)
svn:r1471
* read all the time (before we would ignore eof sometimes, oops)
* we can handle different urls now
* send back 404 for an un-handled url
* commands initiated by the client can handle payloads now
* introduce conn->purpose to avoid exponential state-space explosion
svn:r1400
successful/failed connections, successful/failed extends, and
connection uptimes.
It's still not done: more tests are needed, and not everything calls
connection/circuit_mark_for_close properly. This skews the results.
Also, there needs to be a 'testing' mode for non-OP ORs, where they
periodically build circuits just to test whether extends work.
svn:r1313
we were never writing anything when hold_open_until_flushed was set,
since conn_write returns early if marked_for_conn is set.
seems a bit better now.
svn:r1214
Apparently, when a DNS failure was already cached, then when we tried
to mark the exit connection as closed, we'd try to remove it from the
pending queue anyway, and hit an assert. Now, we put failed-resolve
connections in a separate state so that mark_for_close does the right
thing.
svn:r1196
who wants to shut down a connection calls connection_mark_for_close instead
of setting marked_for_close to 1. This automatically removes the connection
from the DNS cache if needed, sends a RELAY END cell if appropriate, and can
be changed to do whatever else is needed.
Still to do:
- The same for circuits, maybe.
- Add some kind of hold_connection_open_until_flushed flag, maybe.
- Change stuff that closes connections with return -1 to use mark_for_close,
maybe.
svn:r1145
add some more data to be flushed but never turn POLLOUT on. not sure
how commonly this bug was hit, but it would be a doozy.
Also add some asserts to see if it happens elsewhere.
svn:r1142
arrives, then the stream wasn't getting removed from the pending list.
this may have been the lucky-bug.
this commit may also not actually fix the bug. it's darn hard to
reproduce.
svn:r1122
We were telling a child to die by closing the parent's file descriptor
to him. But newer children were inheriting the open file descriptor from
the parent, and since they weren't closing them, the socket never closed,
so the child never read eof, so he never knew to exit.
As a side effect to this bug, we were probably failing to properly close
connections to remote hosts, ORs, and OPs, after a dns child was born.
I'm surprised Tor worked at all.
svn:r974
split 7-byte stream_id string into 2-byte recognized and 2-byte stream_id
fix two seg faults in fetch_from_buf_http
fix several lurking seg faults in handling unexpected relay cells
still need to
* clean up relay_crypt
* use relay dummies if there's going to be a conflict with rh.recognized
* check for a conflict when generating stream_ids
svn:r953
never work.
fix vicious bug in choose_good_exit_server that caused it to *skip over*
pending circuits, and look only at *non-pending circuits*, when choosing
a good exit node for the new circuit.
bugfix: remove incorrect asserts in circuit_get_newest()
svn:r876
Also:
- Refactor socks request into a separate struct
- Add a separate 'waiting for circuit' state to AP connections
between 'waiting for socks' and 'open'.
Arma: can you check out the XXX's I've added to connection_edge? I may
be mishandling some async and close logic.
svn:r783
not when we're closing the stream.
this lets us put a payload in the end cell if we want to,
to describe why we're closing the stream.
there are still some places where we don't send the end cell
immediately. i need to track them down. but it's a low priority,
since i've made it send the end cell when we close the stream if
we haven't already sent it.
svn:r640
If DebugLogFile is specified, log to it at -l debug
If LogFile is specified, log to it at the -l from the commandline
(default info)
If no LogFile *and* not a Daemon, then log to stdout.
Make conn->s = -1 by default (this might break things)
When kill -USR1, prefer to log at INFO, but make sure they always see it.
svn:r596
our log() conflicts with log(3)
distribute only the correct files from doc/ and src/config/
sometimes laptops go back in time. i guess that's ok for now.
and bump the version number because we're live.
svn:r544
ERR is if something fatal just happened
WARNING is something bad happened, but we're still running. The bad thing
is either a bug in the code, an attack or buggy protocol/implementation
of the remote peer, etc. The operator should examine the bad thing and
try to correct it.
(No error or warning messages should be expected. I expect most people
to run on -l warning eventually.)
NOTICE is never ever used.
INFO means something happened (maybe bad, maybe ok), but there's nothing
you need to (or can) do about it.
DEBUG is for everything louder than INFO.
svn:r486
redo all the config files for the new format (we'll redo them again soon)
fix (another! yuck) segfault in log_fn when input is too large
tor_tls_context_new() returns -1 for error, not NULL
fix segfault in check_conn_marked() on conn's that die during tls handshake
make ORs also initialize conn from router when we're the receiving node
make non-dirserver ORs upload descriptor to every dirserver on startup
add our local address to the descriptor
add Content-Length field to POST command
revert the Content-Length search in fetch_from_buf_http() to previous code
fix segfault in memmove in fetch_from_buf_http()
raise maximum allowed headers/body size in directory.c
svn:r484
'buf_t' is now an opaque type defined in buffers.c .
Router descriptors now include all keys; routers generate keys as
needed on startup (in a newly defined "data directory"), and generate
their own descriptors. Descriptors are now self-signed.
Implementation is not complete: descriptors are never published; and
upon receiving a descriptor, the directory doesn't do anything with
it.
At least "routers.or" and orkeygen are now obsolete, BTW.
svn:r483
Fixed up the assert_*_ok funcs some (more work remains)
Changed config so it reads either /etc/torrc or the -f arg, never both
Finally tracked down a nasty bug with our use of tls:
It turns out that if you ask SSL_read() for no more than n bytes, it
will read the entire record from the network (and maybe part of the next
record, I'm not sure), give you n bytes of it, and keep the remaining
bytes internally. This is fine, except our poll-for-read looks at the
network, and there are no bytes pending on the network, so we never know
to ask SSL_read() for more bytes. Currently I've hacked it so if we ask
for n bytes and it returns n bytes, then it reads again right then. This
will interact poorly with our rate limiting; we need a cleaner solution.
svn:r481
deal with content-length headers better when reading http
don't assume struct socks4_info is a packed struct
fail the socks handshake if destip is zero
flesh out conn_state_to_string() for dir conn
fix typo (bug) in connection_handle_read()
directory get is now called fetch, post is now upload
reopen logs on sighup
svn:r475
this paves the way for supporting socks5 and other handshakes
it also removes those pesky AP-only variables from connection_t
also hacked a fix for a bug where some streams weren't ending properly --
maybe because marked connections weren't flushing properly?
svn:r472
- signal support
- forking for DNS farm
- changes for async IO
- daemonizing
In other words, some files still don't build, and the ones that do build,
do nonblocking IO incorrectly.
I'm also not checking in the project files till I have a good place
for them.
svn:r380
i've eliminated the master dns process, so now the workers just
act like regular connections and are handled by the normal pollarray.
everything seems to still work. ;)
svn:r327
on startup, it forks off a master dns handler, which forks off dns
slaves (like the apache model). slaves as spawned as load increases,
and then reused. excess slaves are not ever killed, currently.
implemented topics. each topic has a receive window in each direction
at each edge of the circuit, and sends sendme's at the data level, as
per before. each circuit also has receive windows in each direction at
each hop; an edge sends a circuit-level sendme as soon as enough data
cells have arrived (regardless of whether the data cells were flushed
to the exit conns). removed the 'connected' cell type, since it's now
a topic command within data cells.
at the edge of the circuit, there can be multiple connections associated
with a single circuit. you find them via the linked list conn->next_topic.
currently each new ap connection starts its own circuit, so we ought
to see comparable performance to what we had before. but that's only
because i haven't written the code to reattach to old circuits. please
try to break it as-is, and then i'll make it reuse the same circuit and
we'll try to break that.
svn:r152
now tor can be run safely inside nat'ed areas that kill idle
connections; and the proxy can handle when you suspend your laptop
and then emerge hours later from a new domain.
svn:r125
prkey is only fetched when it's needed
tor nodes who aren't dirservers now fetch directories and autoconnect
to new nodes listed in the directory
default role is a non-dirserver node
svn:r120
revamped the router reading section
reference counting for crypto pk env's (so we can dup them)
we now read and write pem pk keys from string rather than from FILE*,
in anticipation of fetching directories over a socket
(so now on startup we slurp in the whole file, then parse it as a string)
fixed a bug in the proxy side, where you could get some circuits
wedged if they showed up while the connection was being made
svn:r110
httpap is obsolete; we support privoxy directly now!
smtpap is obsolete; need to find a good socks4a-enabled smtp proxy/client
I dub thee 0.0.1.
svn:r107
Servers are allowed to send 100 cells initially, and can't send more until
they receive a 'sendme' cell from that direction, indicating that they
can send 10 more cells. As it currently stands, the exit node quickly
runs out of window, and sends bursts of 10 whenever a sendme cell gets
to him. This is much much much faster (and more flexible) than the old
"give each circuit 1 kB/s and hope nothing overflows" approach.
Also divided out the connection_watch_events into stop_reading,
start_writing, etc. That way we can control them separately.
svn:r54
we're now much more robust when bandwidth varies: instead of forcing a
fixed bandwidth on the link, we instead use what the link will give us,
up to our bandwidth.
svn:r53
Each socket reads at most 'bandwidth' bytes per second sustained, but
can handle bursts of up to 10*bandwidth bytes.
Cells are now sent out at evenly-spaced intervals, with padding sent
out otherwise. Set Linkpadding=0 in the rc file to send cells as soon
as they're available (and to never send padding cells).
Added license/copyrights statements at the top of most files.
router->min and router->max have been merged into a single 'bandwidth'
value. We should make the routerinfo_t reflect this (want to do that,
Mat?)
As the bandwidth increases, and we want to stop sleeping more and more
frequently to send a single cell, cpu usage goes up. At 128kB/s we're
pretty much calling poll with a timeout of 1ms or even 0ms. The current
code takes a timeout of 0-9ms and makes it 10ms. prepare_for_poll()
handles everything that should have happened in the past, so as long as
our buffers don't get too full in that 10ms, we're ok.
Speaking of too full, if you run three servers at 100kB/s with -l debug,
it spends too much time printing debugging messages to be able to keep
up with the cells. The outbuf ultimately fills up and it kills that
connection. If you run with -l err, it works fine up through 500kB/s and
probably beyond. Down the road we'll want to teach it to recognize when
an outbuf is getting full, and back off.
svn:r50
basically, a twin is a router which is different except it shares
the same keypair. so in cases where we want to find a "next router"
and all we really care is that it can decrypt the next onion layer,
then a twin is just as good.
we still need to decide how to mark twins in the routerinfo_t and in
the routers config file.
svn:r30
The 'or' process can now be told (by the global_role variable) what
roles this server should play -- connect to all ORs, listen for ORs,
listen for OPs, listen for APs, or any combination.
* everything in /src/op/ is now obsolete.
* connection_ap.c now handles all interactions with application proxies
* "port" is now or_port, op_port, ap_port. But routers are still always
referenced (say, in conn_get_by_addr_port()) by addr / or_port. We
should make routers.c actually read these new ports (currently I've
kludged it so op_port = or_port+10, ap_port=or_port+20)
* circuits currently know if they're at the beginning of the path because
circ->cpath is set. They use this instead for crypts (both ways),
if it's set.
* I still obey the "send a 0 back to the AP when you're ready" protocol,
but I think we should phase it out. I can simply not read from the AP
socket until I'm ready.
I need to do a lot of cleanup work here, but the code appears to work, so
now's a good time for a checkin.
svn:r22
