Previously, it would remove every trackhostexits-derived mapping
*from* xyz.<exitname>.exit; it was supposed to remove every
trackhostexits-derived mapping *to* xyz.<exitname>.exit.
Bugfix on 0.2.0.20-rc: fixes an XXX020 added while staring at bug-1090
issues.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
This once maybe made sense when ExitNodes meant "Here are 3 exits;
use them all", but now it more typically means "Here are 3
countries; exit from there." Using non-Fast/Stable exits created a
potential partitioning opportunity and an annoying stability
problem.
(Don't worry about the case where all of our ExitNodes are non-Fast
or non-Stable: we handle that later in the function by retrying with
need_capacity and need_uptime set to 0.)
The last entry of the *Maxima values in the state file was inflated by a
factor of NUM_SECS_ROLLING_MEASURE (currently 10). This could lead to
a wrong maximum value propagating through the state file history.
When reading the bw history from the state file, we'd add the 900-second
value as traffic that occured during one second. Fix that by adding the
average value to each second.
This bug was present since 0.2.0.5-alpha, but was hidden until
0.2.23-alpha when we started using the saved values.
Some tor relays would report lines like these in their extrainfo
documents:
dirreq-write-history 2011-03-14 16:46:44 (900 s)
This was confusing to some people who look at the stats. It would happen
whenever a relay first starts up, or when a relay has dirport disabled.
Change this so that lines without actual bw entries are omitted.
Implements ticket 2497.
While doing so, get rid of the now unnecessary function
control_signal_act().
Fixes bug 2917, reported by Robert Ransom. Bugfix on commit
9b4aa8d2ab. This patch is loosely based on
a patch by Robert (Changelog entry).
Instead of answering GETINFO requests about our geoip usage only after
running for 24 hours, this patch makes us answer GETINFO requests
immediately. We still round and quantize as before.
Implements bug2711.
Also, refactor the heck out of the bridge usage formatting code. No
longer should we need to do a generate-parse-and-regenerate cycle to
get the controller string, and that lets us simplify the code a lot.
- Document it in the manpage
- Add a changes entry
- No need to log when it is set: we don't log for other options.
- Use doxygen to document the new flag.
- Test truth of C variables with "if (x)", not "if (x == 1)".
- Simplify a complex boolean expression by breaking it up.
We've got millisecond timers now, we might as well use them.
This change won't actually make circuits get expiered with microsecond
precision, since we only call the expiry functions once per second.
Still, it should avoid the situation where we have a circuit get
expired too early because of rounding.
A couple of the expiry functions now call tor_gettimeofday: this
should be cheap since we're only doing it once per second. If it gets
to be called more often, though, we should onsider having the current
time be an argument again.
Since svn r1475/git 5b6099e8 in tor-0.0.6, we have responded to an
exhaustion of all 65535 stream IDs on a circuit by marking that
circuit for close. That's not the right response. Instead, we
should mark the circuit as "too dirty for new circuits".
Of course in reality this isn't really right either. If somebody
has managed to cram 65535 streams onto a circuit, the circuit is
probably not going to work well for any of those streams, so maybe
we should be limiting the number of streams on an origin circuit
concurrently.
Also, closing the stream in this case is probably the wrong thing to
do as well, but fixing that can also wait.
We fixed bug 539 (where directories would say "503" but send data
anyway) back in 0.2.0.16-alpha/0.1.2.19. Because most directory
versions were affected, we added workaround to make sure that we
examined the contents of 503-replies to make sure there wasn't any
data for them to find. But now that such routers are nonexistent,
we can remove this code. (Even if somebody fired up an 0.1.2.19
directory cache today, it would still be fine to ignore data in its
erroneous 503 replies.)
The first was genuinely impossible, I think: it could only happen
when the amount we read differed from the amount we wanted to read
by more than INT_MAX.
The second is just very unlikely: it would give incorrect results to
the controller if you somehow wrote or read more than 4GB on one
edge conn in one second. That one is a bugfix on 0.1.2.8-beta.
In afe414 (tor-0.1.0.1-rc~173), when we moved to
connection_edge_end_errno(), we used it in handling errors from
connection_connect(). That's not so good, since by the time
connection_connect() returns, the socket is no longer set, and we're
supposed to be looking at the socket_errno return value from
connection_connect() instead. So do what we should've done, and
look at the socket_errno value that we get from connection_connect().
Right now, we only consider sending stream-level SENDME cells when we
have completely flushed a connection_edge's outbuf, or when it sends
us a DATA cell. Neither of these is ideal for throughput.
This patch changes the behavior so we now call
connection_edge_consider_sending_sendme when we flush _some_ data from
an edge outbuf.
Fix for bug 2756; bugfix on svn r152.
Resolved nontrivial conflict around rewrite_x_address_for_bridge and
learned_bridge_descriptor. Now, since leanred_bridge_descriptor works
on nodes, we must make sure that rewrite_node_address_for_bridge also
works on nodes.
Conflicts:
src/or/circuitbuild.c
hid_serv_responsible_for_desc_id's return value is never negative, and
there is no need to search through the consensus to find out whether we
are responsible for a descriptor ID before we look in our cache for a
descriptor.
It is important to verify the uptime claim of a relay instead of just
trusting it, otherwise it becomes too easy to blackhole a specific
hidden service. rephist already has data available that we can use here.
Bugfix on 0.2.0.10-alpha.
Partial backport of daa0326aaa .
Resolves bug 2402. Bugfix on 0.2.1.15 (for the part where we switched to
git) and on 0.2.1.30 (for the part where we dumped micro-revisions.)
We want to use the discard port correctly, so a htons() was missing.
Also we need to set it correctly depending on address family.
Review provided by danieldg
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
(Backport from 0.2.2's 5ed73e3807)
rransom noticed that a change of ORPort is just as bad as a change of IP
address from a client's perspective, because both mean that the relay is
not available to them while the new information hasn't propagated.
Change the bug1035 fix accordingly.
Also make sure we don't log a bridge's IP address (which might happen
when we are the bridge authority).
It is often not entirely clear what options Tor was built with, so it
might not be immediately obvious which config file Tor is using when it
found one. Log the config file at startup.
We detect and reject said attempts if there is no chosen exit node or
circuit: connecting to a private addr via a randomly chosen exit node
will usually fail (if all exits reject private addresses), is always
ill-defined (you're not asking for any particular host or service),
and usually an error (you've configured all requests to go over Tor
when you really wanted to configure all _remote_ requests to go over
Tor).
This can also help detect forwarding loop requests.
Found as part of bug2279.
If we got a signed digest that was shorter than the required digest
length, but longer than 20 bytes, we would accept it as long
enough.... and then immediately fail when we want to check it.
Fixes bug 2409; bug in 0.2.2.20-alpha; found by piebeer.
Previously if you wanted to say "All messages except network
messages", you needed to say "[*,~net]" and if you said "[~net]" by
mistake, you would get no messages at all. Now, if you say "[~net]",
you get everything except networking messages.
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
When we stopped using svn, 0.2.1.x lost the ability to notice its svn
revision and report it in the version number. However, it kept
looking at the micro-revision.i file... so if you switched to master,
built tor, then switched to 0.2.1.x, you'd get a micro-revision.i file
from master reported as an SVN tag. This patch takes out the "include
the svn tag" logic entirely.
Bugfix on 0.2.1.15-rc; fixes bug 2402.
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
This patch imposes (very long) limits on the length of a line in a
directory document, and on the length of a certificate. I don't
think it should actually be possible to overrun these remotely,
since we already impose a maximum size on any directory object we're
downloading, but a little defensive programming never hurt anybody.
Roger emailed me that doorss reported these on IRC, but nobody seems
to have put them on the bugtracker.
We need to make sure that the worst thing that a weird consensus param
can do to us is to break our Tor (and only if the other Tors are
reliably broken in the same way) so that the majority of directory
authorities can't pull any attacks that are worse than the DoS that
they can trigger by simply shutting down.
One of these worse things was the cbtnummodes parameter, which could
lead to heap corruption on some systems if the value was sufficiently
large.
This commit fixes this particular issue and also introduces sanity
checking for all consensus parameters.
Our public key functions assumed that they were always writing into a
large enough buffer. In one case, they weren't.
(Incorporates fixes from sebastian)
In dnsserv_resolved(), we carefully made a nul-terminated copy of the
answer in a PTR RESOLVED cell... then never used that nul-terminated
copy. Ouch.
Surprisingly this one isn't as huge a security problem as it could be.
The only place where the input to dnsserv_resolved wasn't necessarily
nul-terminated was when it was called indirectly from relay.c with the
contents of a relay cell's payload. If the end of the payload was
filled with junk, eventdns.c would take the strdup() of the name [This
part is bad; we might crash there if the cell is in a bad part of the
stack or the heap] and get a name of at least length
495[*]. eventdns.c then rejects any name of length over 255, so the
bogus data would be neither transmitted nor altered.
[*] If the name was less than 495 bytes long, the client wouldn't
actually be reading off the end of the cell.
Nonetheless this is a reasonably annoying bug. Better fix it.
Found while looking at bug 2332, reported by doorss. Bugfix on
0.2.0.1-alpha.
Previously, we only looked at up to 128 bytes. This is a bad idea
since socks messages can be at least 256+x bytes long. Now we look at
up to 512 bytes; this should be enough for 0.2.2.x to handle all valid
SOCKS messages. For 0.2.3.x, we can think about handling trickier
cases.
Fixes 2330. Bugfix on 0.2.0.16-alpha.
