This solves the problem Roger noted as:
What if the router has a clock that's 5 minutes off, so it
publishes a descriptor for 5 minutes in the future, and we test it
three minutes in. In this edge case, we will continue to advertise
it as Running for the full 45 minute period.
V3 authorities no longer decide not to vote on Guard+Exit. The bandwidth
weights should take care of this now.
Also, lower the max threshold for WFU to 0.98, to allow more nodes to become
guards.
Now if you're a published relay and you set RefuseUnknownExits, even
if your dirport is off, you'll fetch dir info from the authorities,
fetch it early, and cache it.
In the future, RefuseUnknownExits (or something like it) will be on
by default.
When calculating the is_exit flag for a routerinfo_t, we don't need
to call exit_policy_is_general_exit() if router_exit_policy_rejects_all()
tells us it definitely is an exit. This check is much cheaper than
running exit_policy_is_general_exit().
Some *_free functions threw asserts when passed NULL. Now all of them
accept NULL as input and perform no action when called that way.
This gains us consistence for our free functions, and allows some
code simplifications where an explicit null check is no longer necessary.
This was left over from an early draft of the microdescriptor code; it
began to populate the signatures array of a networkstatus vote, even
though there's no actual need to do that for a vote.
This patch introduces a new type called document_signature_t to represent the
signature of a consensus document. Now, each consensus document can have up
to one document signature per voter per digest algorithm. Also, each
detached-signatures document can have up to one signature per <voter,
algorithm, flavor>.
This is a possible fix for bug 1023, where if we vote (or make a v2
consensus networkstatus) right after we come online, we can call
rep_hist_note_router_unreachable() on every router we haven't connected
to yet, and thereby make all their uptime values reset.
Directory authorities now reject Tor relays with versions less than
0.1.2.14. This step cuts out four relays from the current network,
none of which are very big.
This was the only log notice that happened during other
tor invocations, like --verify-config and --list-fingerprint.
Plus, now we think it works, so no need to hear about it.
The more verbose logs that were added in ee58153 also include a string
that might not have been initialized. This can lead to segfaults, e.g.,
when setting up private Tor networks. Initialize this string with NULL.
bytes (aka 20KB/s), to match our documentation. Also update
directory authorities so they always assign the Fast flag to relays
with 20KB/s of capacity. Now people running relays won't suddenly
find themselves not seeing any use, if the network gets faster
on average.
svn:r19305
descriptors shortly after startup, and then briefly resume
after a new bandwidth test and/or after publishing a new bridge
descriptor. Bridge users that try to bootstrap from them would
get a recent networkstatus but would get descriptors from up to
18 hours earlier, meaning most of the descriptors were obsolete
already. Reported by Tas; bugfix on 0.2.0.13-alpha.
svn:r17920
The subversion $Id$ fields made every commit force a rebuild of
whatever file got committed. They were not actually useful for
telling the version of Tor files in the wild.
svn:r17867
shahn: "Add some documentation for the WRA_* family of functions, also make
sure that (hopefully) all functions that return was_router_added_t
don't return ints directly and that they don't refer to integers in
their documentation anymore."
svn:r17731
more extreme happens. the default should be to be quiet unless
something more extreme happens.
at least, this doesn't generate complaints anymore. perhaps that
means it is working better? :)
svn:r17724
Initial conversion of uint32_t addr to tor_addr_t addr in connection_t and related types. Most of the Tor wire formats using these new types are in, but the code to generate and use it is not. This is a big patch. Let me know what it breaks for you.
svn:r16435
Make generic address manipulation functions work better. Switch address policy code to use tor_addr_t, so it can handle IPv6. That is a good place to start.
svn:r16178
Refactor the is_vote field of networkstatus_t to add a third possibility ("opinion") in addition to vote and opinion. First part of implementing proposal 147.
svn:r16166
authorities for their first directory fetch, even if their DirPort
is off or if they don't know they're reachable yet. This will help
them bootstrap better. Bugfix on 0.2.0.18-alpha; fixes bug 609.
svn:r13688
As planned, rename networkstatus_vote_t to networkstatus_t, now that v3 networkstatuses are working and standard and v2 networkstatuses are obsolete.
svn:r13383
for a v2 or v3 networkstatus object before we were prepared. This
was particularly bad for 0.2.0.13 and later bridge relays, who
would never have a v2 networkstatus and would thus always crash
when used. Bugfixes on 0.2.0.x.
Estimate the v3 networkstatus size more accurately, rather than
estimating it at zero bytes and giving it artificially high priority
compared to other directory requests. Bugfix on 0.2.0.x.
svn:r12952
create the "cached-status" directory in their datadir. All Tors
used to create it. Bugfix on 0.1.2.x.
Bridge relays with DirPort set to 0 no longer cache v1 or v2
directory information; there's no point. Bugfix on trunk.
svn:r12887
authorities to mark certain relays as "bad directories" in the
networkstatus documents. Also supports the "!baddir" directive in
the approved-routers file.
svn:r12754
downloading new consensus documents. Bridge users now wait until
the end of the interval, so their bridge will be sure to have a
new consensus document.
svn:r12696
on but your ORPort is off.
Add a new config option BridgeRelay that specifies you want to
be a bridge relay. Right now the only difference is that it makes
you answer begin_dir requests, and it makes you cache dir info,
even if your DirPort isn't on.
Refactor directory_caches_dir_info() into some more functions.
svn:r12668
When authorities detected more than two relays running on the same
IP address, they were clearing all the status flags but forgetting
to clear the "hsdir" flag. So clients were being told that a
given relay was the right choice for a v2 hsdir lookup, yet they
never had its descriptor because it was marked as 'not running'
in the consensus.
svn:r12515
Mess with the formula for the Guard flag again. Now it requires that you be in the most familiar 7/8 of nodes, and have above median wfu for that 7/8th. See spec for details. Also, log thresholds better.
svn:r12440
minutes, but writing the "valid-after" line in our vote based
on our configured V3AuthVotingInterval: so unless the intervals
matched up, we immediately rejected our own vote because it didn't
start at the voting interval that caused us to construct a vote.
This caused log entries like:
Oct 23 01:16:16.303 [notice] Choosing expected valid-after time
as 2007-10-23 05:30:00: consensus_set=0, interval=1800
...
Oct 23 01:20:01.203 [notice] Choosing valid-after time in vote as
2007-10-23 06:00:00: consensus_set=0, interval=3600
Oct 23 01:20:01.290 [warn] Rejecting vote with valid-after time of
2007-10-23 06:00:00; we were expecting 2007-10-23 05:30:00
Oct 23 01:20:01.291 [warn] Couldn't store my own vote! (I told
myself, 'Bad valid-after time'.)
Nick, you should look at this, as it's your design. :)
svn:r12129
Make unverified-consensus get removed when it is accepted or rejected. Make a new get_datadir_fname*() set of functions to eliminate the common code of "get the options, get the datadir, append some stuff".
svn:r12000
Implement v3 networkstatus client code. Remove v2 networkstatus client code, except as needed for caches to fetch and serve v2 networkstatues and the routers they list.
svn:r11957
Fix the bug that was making moria1 set valid-after wrong in its votes: we were looking at the preferred timing when we should have been looking at the consensus timing.
svn:r11818
Add a bunch of function documentation; clean up a little code; fix some XXXXs; tag the nonsensical EXTRAINFO_PURPOSE_GENERAL as nonsesnse; note another bit of "do not cache special routers" code to nuke.
svn:r11761
Use descriptor annotations to record the source, download t time, and purpose of every descriptor we add to the store. The remaining to-do item is to stop setting do_not_cache on bridges.
svn:r11680
More annotated-store work: handle annotations in lists correctly. Add ability to prepend annotations to a routerdesc (and to every rtouredesc in a list), while verifying that the routerdesc is not already annotated.
svn:r11665
Backend for descriptor annotations: parse annotations as keywords; only allow them to appear in the cache; do not serve them as part of the descriptor if we are a dirserver. Still need mechanism to set annotations. Still need to rename cache file.
svn:r11654
Fix a bug that made servers send a "404 Not found" in response to
attempts to fetch their server descriptor. This caused Tor servers
to take many minutes to establish reachability for their DirPort,
and it totally crippled bridges. Bugfix on 0.2.0.5-alpha.
svn:r11545
Finish implementing and documenting proposal 108: Authorities now use MTBF data to set their stability flags, once they have at least 4 days of data to use.
svn:r11240
More directory voting code. Now, if everything works, and I haven't forgotten anything, it is possible to set up some v3 authorities and start voting. Of course, I have probably forgotten something, and there are probably bugs in there somewhere too.
svn:r10976
Implement proposal 109: As an authority, never call more than 3 servers per IP Running and Valid. Prefer Running servers to non-running ones; then prefer high-bandwidth to low-bandwidth. Needs testing.
svn:r10968
