This is just refactoring work here. The old logic was kind of
convoluted, especially after the bug 5572 fix. We don't actually need to
distinguish so many cases here. Dropping detection of the
"!old_options || !old_options->DynamicDHGroups" case is fine because
that's the same that we'd do for clients.
Also add a changes file for bug 5572.
The message only means that we're publishing a new descriptor when we
are actually in some kind of server mode, and publication is on.
Fix for bug 3942; bugfix on 0.2.3.2-alpha.
This fixes a side-channel attack on the (fortunately unused!)
BridgePassword option for bridge authorities. Fix for bug 5543;
bugfix on 0.2.0.14-alpha.
This is ticket 2479. Roger's original explanation was:
We have a series of bugs where relays publish a descriptor within
12 hours of their last descriptor, but the authorities drop it
because it's not different "enough" from the last one and it's
too close to the last one.
The original goal of this idea was to a) reduce the number of new
descriptors authorities accept (and thus have to store) and b)
reduce the total number of descriptors that clients and mirrors
fetch. It's a defense against bugs where relays publish a new
descriptor every minute.
Now that we're putting out one consensus per hour, we're doing
better at the total damage that can be caused by 'b'.
There are broader-scale design changes that would help here, and
we've had a trac entry open for years about how relays should
recognize that they're not in the consensus, or recognize when
their publish failed, and republish sooner.
In the mean time, I think we should change some of the parameters
to make the problem less painful.
When we started RefuseUnknownExits back in 0.2.2.11-alpha, we
started making exits act like they cache directory info (since they
need an up-to-date idea of who is really a router). But this
included fetching needless (unrecognized) authorities' certs, which
doesn't make any sense for them.
This is related to, but not necessarily the same as, the issue that
Ian reported for bug #2297.
(This patch is based on a patch from a user who I believe has asked
not to be named. If I'm wrong about that, please add the
appropriate name onto the changelog.)
==
Nick here. I tweaked this patch a little to make it apply cleanly to
master, to extract some common code into a function, and to replace
snprintf with tor_snprintf.
-- nickm
Specifically, it was a fix on 33e2053ebc, where we introduced the
WRA_* and ROUTER_* codes for dirserv_add_descriptor. Previously, we
had checked for a _negative_ return from dirserv_add_descriptor, which
meant "rejected". An insufficiently new descriptor would give a
0-valued return. But when we switched from numbers to enums, we got
this check wrong and had init_keys() give an error whenever the
descriptor wasn't accepted.
This mitigates an attack proposed by wanoskarnet, in which all of a
client's bridges collude to restrict the exit nodes that the client
knows about. Fixes bug 5343.
Since 0.2.3.1-alpha, we've supported the Linux extensions to socket(),
open(), socketpair(), and accept() that enable us to create an fd and
make it close-on-exec with a single syscall. This not only saves us a
syscall (big deal), but makes us less vulnerable to race conditions
where we open a socket and then exec before we can make it
close-on-exec.
But these extensions are not supported on all Linuxes: They were added
between 2.6.23 or so and 2.6.28 or so. If you were to build your Tor
against a recent Linux's kernel headers, and then run it with a older
kernel, you would find yourselve unable to open sockets. Ouch!
The solution here is that, when one of these syscalls fails with
EINVAL, we should try again in the portable way. This adds an extra
syscall in the case where we built with new headers and are running
with old ones, but it will at least allow Tor to work.
Fixes bug 5112; bugfix on 0.2.3.1-alpha.
The big change here is a patch (first added to Libevent by Ed Day)
to make sure that the CreateProcess forked-test trick works even
when the main test program is invoked without its .exe suffix.
Previously we'd been using "we have clock_gettime()" as a proxy for
"we need -lrt to link a static libevent". But that's not really
accurate: we should only add -lrt if searching for clock_gettime
function adds -lrt to our libraries.
in Makefile.am, we used it without quoting it, causing build failure if
your openssl/sed/sha1sum happened to live in a directory with a space in
it (very common on windows)
This reverts commit 55e8cae815.
The conversation from irc:
> weasel: i had intended to leave torrc.sample.in alone in maint-0.2.2,
since i don't want to make all your stable users have to deal with
a torrc change. but nickm changed it. is it in fact the case that a
change in that file means a change in the deb?
<weasel> it means you'll prompt every single user who ever touched
their torrc
<weasel> and they will be asked if they like your new version better
than what they have right now
<weasel> so it's not great
Instead I changed the website to redirect requests for the tor-manual
URL listed in maint-0.2.2's torrc.sample.in so the link will still work.
If we don't do this, [::] can be interpreted to mean all v4 and all
v6 addresses. Found by dcf. Fixes bug 4760. See RFC 3493 section
5.3 for more info.
There was one MS_WINDOWS that remained because it wasn't on a macro
line; a few remaining uses (and the definition!) in configure.in;
and a now-nonsensical stanza of eventdns_tor.h that previously
defined 'WIN32' if it didn't exist.
Previously the client would ask the bridge for microdescriptors, which are
only supported in 0.2.3.x and later, and then fail to bootstrap when it
didn't get the answers it wanted. Fixes bug 4013; bugfix on 0.2.3.2-alpha.
The fix here is to revert to using normal descriptors if any of our
bridges are known to not support microdescs. This is not ideal, a) because
we'll start downloading a microdesc consensus as soon as we get a bridge
descriptor, and that will waste time if we later get a bridge descriptor
that tells us we don't like microdescriptors; and b) by changing our mind
we're leaking to our other bridges that we have an old-version bridge.
The alternate fix would have been to change
we_use_microdescriptors_for_circuits() to ask if *any* of our bridges
can support microdescriptors, and then change the directory logic that
picks a bridge to only select from those that do. For people living in
the future, where 0.2.2.x is obsolete, there won't be a difference.
Note that in either of these potential fixes, we have risk of oscillation
if our one funny-looking bridges goes away / comes back.
This option seems to be supported all the way back to at least 10.4, so
enabling it for OS X in general should be fine. If not, someone will
yell.
With no libs statically linked, that's a 3% win in binary size, with
just libevent linked statically, this gives us an advantage of 5% in
terms of binary size, and with libevent and openssl statically linked,
we gain over 18% or over 500KB.
Implements ticket 2915.
These were found by looking for tor_snprintf() instances that were
followed closely by tor_strdup(), though I probably converted some
other snprintfs as well.
(To ensure correctness, in every case, make sure that the temporary
variable is deleted, renamed, or lowered in scope, so we can't have
any bugs related to accidentally relying on the no-longer-filled
variable.)
To solve bug 4779, we want to avoid OpenSSL 1.0.0's counter mode.
But Fedora (and maybe others) lie about the actual OpenSSL version,
so we can't trust the header to tell us if it's safe.
Instead, let's do a run-time test to see whether it's safe, and if
not, use our built-in version.
fermenthor contributed a pretty essential fixup to this patch. Thanks!
When we have an effective bandwidthrate configured so that we cannot
exceed our bandwidth limit in one accounting interval, don't disable
advertising the dirport. Implements ticket 2434.
Fixes bug 4413; bugfix on xxxx.
Hostname components cannot be larger than 63 characters.
This simple check makes certain randlen cannot overflow rand_bytes_len.
We used to do this as a workaround for older Tors, but now it's never
the correct thing to do (especially since anything that didn't
understand RELAY_EARLY is now deprecated hard).
This patch should make us reject every Tor that was vulnerable to
CVE-2011-0427. Additionally, it makes us reject every Tor that couldn't
handle RELAY_EARLY cells, which helps with proposal 110 (#4339).
Previously we required 1.0.0, but there was a bug in the 1.0.0 counter
mode. Found by Pascal. Fixes bug 4779.
A more elegant solution would be good here if somebody has time to code
one.
Back in #1240, r1eo linked to information about how this could happen
with older Linux kernels in response to nmap. Bugs #4545 and #4547
are about how our approach to trying to deal with this condition was
broken and stupid. Thanks to wanoskarnet for reminding us about #1240.
This is a fix for the abovementioned bugs, and is a bugfix on
0.1.0.3-rc.
Preprocessor directives should not be put inside the arguments
of a macro. This is not supported on older GCC releases (< 3.3)
thus broke compilation on Haiku (running gcc2).
--enable-gcc-warnings enables two warnings that clang doesn't support,
so the build fails. We had hoped clang 3.0 would add those, but it
didn't, so let's just always disable those warnings when building with
clang. We can still fix it later once they add support
If a relay is dormant at startup, it will call init_keys before
crypto_set_tls_dh_prime. This is bad. Let's make it not so bad, because
someday it *will* happen again.
Conflicts:
src/or/connection_or.c
The conflict in src/or/connection_or.c is resolved by taking the
version in master, since e27a26d5 already fixed bug 4531 on master.
This merge just adds the changes file from 0.2.2.
Some controllers want this so they can mess with Tor's configuration
for a while via the control port before actually letting Tor out of
the house.
We do this with a new DisableNetwork option, that prevents Tor from
making any outbound connections or binding any non-control
listeners. Additionally, it shuts down the same functionality as
shuts down when we are hibernating, plus the code that launches
directory downloads.
To make sure I didn't miss anything, I added a clause straight to
connection_connect, so that we won't even try to open an outbound
socket when the network is disabled. In my testing, I made this an
assert, but since I probably missed something, I've turned it into a
BUG warning for testing.
This will mainly help distributors by giving a way to set system or package
defaults that a user can override, and that a later package can replace.
No promises about the particular future location or semantics for this:
we will probably want to tweak it some before 0.2.3.x-rc
The file is searched for in CONFDIR/torrc-defaults , which can be
overridden with the "--defaults-torrc" option on the command line.
This starts an effort to refactor torrc handling code to make it easier
to live with. It makes it possible to override exit policies from the
command line, and possible to override (rather than append to) socksport
lists from the command line.
It'll be necessary to make a "base" torrc implementation work at all.
This shaves about 7% off our per-cell AES crypto time for me; the
effect for accelerated AES crypto should be even more, since the AES
calculation itself will make an even smaller portion of the
counter-mode performance.
(We don't want to do this for pre-1.0.0 OpenSSL, since our AES_CTR
implementation was actually faster than OpenSSL's there, by about
10%.)
Fixes issue #4526.
The timercmp macro uses triggers a "space between function name and
opening parentheses" warning for the check spaces script. Work around
this by simply disabling the check for all "functions" named 'op()'.
The function is over 10 or 20% on some of Moritz's profiles, depending
on how you could.
Since it's checking for a multi-hour timeout, this is safe to do.
Fixes bug 4518.
Completely disable stats if we aren't running as a relay. We won't
collect any anyway, so setting up the infrastructure for them and
logging about them is wrong. This also removes a confusing log
message that clients without a geoip db would have seen.
Fixes bug 4353.
When running with IOCP, we are in theory able to use userspace-
allocated buffers to avoid filling up the stingy amount of kernel
space allocated for sockets buffers.
The bufferevent_async implementation in Libevent provides this
ability, in theory. (There are likely to be remaining bugs). This
patch adds a new option that, when using IOCP bufferevents, sets
each socket's send and receive buffers to 0, so that we should use
this ability.
When all the bugs are worked out here, if we are right about bug 98,
this might solve or mitigate bug 98.
This option is experimental and will likely require lots of testing
and debugging.
This is a fancier bug4457 workaround for 0.2.3. In 0.2.2, we could
just tell Libevent "Don't enable locking!" so it wouldn't try to make
the event_base notifiable. But for IOCP, we need a notifiable base.
(Eventually, we'll want a notifiable base for other stuff, like
multithreaded crypto.) So the solution is to try a full-featured
initialization, and then retry with all the options turned off if that
fails.
Conflicts:
src/common/compat_libevent.c
Resolving conflict by not taking 7363eae13c ("Use the
EVENT_BASE_FLAG_NOLOCK flag to prevent socketpair() invocation"): in
Tor 0.2.3.x, we _do_ sometimes use notifiable event bases.
In Tor 0.2.2, we never need the event base to be notifiable, since we
don't call it from other threads. This is a workaround for bug 4457,
which is not actually a Tor bug IMO.
This thing was pretty pointless on versions of OpenSSL 0.9.8 and later,
and almost totally pointless on OpenSSL 1.0.0.
Also, favor EVP by default, since it lets us get hardware acceleration
where present. (See issue 4442)
The old behavior was susceptible to the compiler optimizing out our
assertion check, *and* could still overflow size_t on 32-bit systems
even when it did work.
- Rename tor_tls_got_server_hello() to tor_tls_got_client_hello().
- Replaced some aggressive asserts with LD_BUG logging.
They were the innocent "I believe I understand how these callbacks
work, and this assert proves it" type of callbacks, and not the "If
this statement is not true, computer is exploding." type of
callbacks.
- Added a changes file.
We would stash the certs in the handshake state before checking them
for validity... and then if they turned out to be invalid, we'd give
an error and free them. Then, later, we'd free them again when we
tore down the connection.
Fixes bug 4343; fix on 0.2.3.6-alpha.
It used to mean "Force": it would tell tor-resolve to ask tor to
resolve an address even if it ended with .onion. But when
AutomapHostsOnResolve was added, automatically refusing to resolve
.onion hosts stopped making sense. So in 0.2.1.16-rc (commit
298dc95dfd), we made tor-resolve happy to resolve anything.
The -F option stayed in, though, even though it didn't do anything.
Oddly, it never got documented.
Found while fixing GCC 4.6 "set, unused variable" warnings.
Previously we did this nearer to the end (in the old_options &&
transition_affects_workers() block). But other stuff cares about
keys being consistent with options... particularly anything which
tries to access a key, which can die in assert_identity_keys_ok().
Fixes bug 3228; bugfix on 0.2.2.18-alpha.
Conflicts:
src/or/config.c
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
Conflicts:
src/or/config.c
We use a hash of the identity key to seed a prng to tell when an
accounting period should end. But thanks to the bug998 changes,
clients no longer have server-identity keys to use as a long-term seed
in accounting calculations. In any case, their identity keys (as used
in TLS) were never never fixed. So we can just set the wakeup time
from a random seed instead there. Still open is whether everybody
should be random.
This patch fixes bug 2235, which was introduced in 0.2.2.18-alpha.
Diagnosed with help from boboper on irc.
From the code:
zlib 1.2.4 and 1.2.5 do some "clever" things with macros. Instead of
saying "(defined(FOO) ? FOO : 0)" they like to say "FOO-0", on the theory
that nobody will care if the compile outputs a no-such-identifier warning.
Sorry, but we like -Werror over here, so I guess we need to define these.
I hope that zlib 1.2.6 doesn't break these too.
Possible fix for bug 1526.
To get a better idea what's going on on Tonga, add some code to report
how often the most and least frequently fetched descriptor was fetched,
as well as 25, 50, 75 percentile.
Also ensure we only count bridge descriptors here.
This is used for the bridge authority currently, to get a better
intuition on how many descriptors are actually fetched from it and how
many fetches happen in total.
Implements ticket 4200.
Fixes bug 4259, bugfix on 0.2.2.25-alpha. Bugfix by "Tey'".
Original message by submitter:
Changing nodes restrictions using a controller while Tor is doing
DNS resolution could makes Tor crashes (on WinXP at least). The
problem can be repeated by trying to reach a non-existent domain
using Tor:
curl --socks4a 127.0.0.1:9050 inexistantdomain.ext
.. and changing the ExitNodes parameter through the control port
before Tor returns a DNS resolution error (of course, the following
command won't work directly if the control port is password
protected):
echo SETCONF ExitNodes=TinyTurtle | nc -v 127.0.0.1 9051
Using a non-existent domain is needed to repeat the issue so that
Tor takes a few seconds for resolving the domain (which allows us to
change the configuration). Tor will crash while processing the
configuration change.
The bug is located in the addressmap_clear_excluded_trackexithosts
method which iterates over the entries of the addresses map in order
to check whether the changes made to the configuration will impact
those entries. When a DNS resolving is in progress, the new_adress
field of the associated entry will be set to NULL. The method
doesn't expect this field to be NULL, hence the crash.
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
This is the cherry-picked 499661524b.
Apparently autoheader throws a tantrum if you say 'AC_DEFINE([a],
[b])'. Instead you must say 'AC_DEFINE([a], [b], [description of
a])'. We were running into this in our replacement definitions for
FLEXIBLE_ARRAY_MEMBER, which were only getting built on autoconf
versions before 2.61 -- and this made us stop working with those
autoconf versinos.
Fixes bug 2430; bugfix on 0.2.3.1-alpha.
Right now we only force a new descriptor upload every 18 hours.
This can make servers become unlisted if they upload a descriptor at
time T which the authorities reject as being "too similar" to one
they uploaded before. Nothing will actually make the server upload a
new descriptor later on, until another 18 hours have passed.
This patch changes the upload behavior so that the 18 hour interval
applies only when we're listed in a live consensus with a descriptor
published within the last 18 hours. Otherwise--if we're not listed
in the live consensus, or if we're listed with a publication time
over 18 hours in the past--we upload a new descriptor every 90
minutes.
This is an attempted bugfix for #3327. If we merge it, it should
obsolete #535.
For some reason, autoconf doesn't by default have an "AC_PROG_AR" for
this -- possibly it's assumed that any "ar" you have will work
everyplace.
Fixes bug 3909; found by sid77.
This fixes a build issue first present in fdbdb4dc15, but the bug
(of not using a correct ar) has been in every Tor version ever: it
just didn't matter until then.
Add a "default" state which we use until we've decided whether we're
live or hibernating. This allows us to properly track whether we're
resuming a hibernation period or not. Fixes bug 2003.
For bufferevents, we had all of connection_buckets_decrement() stubbed
out. But that's not actually right! The rephist_* parts were
essential for, inter alia, recording our own bandwidth. This patch
splits out the rephist parts of connection_buckets_decrement() into their
own function, and makes the bufferevent code call that new function.
Fixes bug 3803, and probably 3824 and 3826 too. Bugfix on 0.2.3.1-alpha.
Previously, if you were set up to use microdescriptors, and you
weren't a cache, you'd never fetch router descriptors (except for
bridges). Now FetchUselessDescriptors causes descriptors and
mirodescs to get cached. Also, FetchUselessDescriptors changes the
behavior of "UseMicrodescriptors auto" to be off, since there's no
point in saying "UseMicrodescriptors 1" when you have full descriptors
too.
Fix for bug 3851; bugfix on 0.2.3.1-alpha.
Because tunneled connections are implemented with buffervent_pair,
writing to them can cause an immediate flush. This means that
added to them and then checking to see whether their outbuf is
empty is _not_ an adequate way to see whether you added anything.
This caused a problem in directory server connections, since they
would try spooling a little more data out, and then close the
connection if there was no queued data to send.
This fix should improve matters; it only closes the connection if
there is no more data to spool, and all of the spooling callbacks
are supposed to put the dirconn into dir_spool_none on completion.
This is bug 3814; Sebastian found it; bugfix on 0.2.3.1-alpha.
When we're doing filtering ssl bufferevents, we want the rate-limits
to apply to the lowest level of the bufferevent stack, so that we're
actually limiting bytes sent on the network. Otherwise, we'll read
from the network aggressively, and only limit stuff as we process it.
Also remove a few other related warnings that could occur during the ssl
handshake. We do this because the relay operator can't do anything about
them, and they aren't their fault.
Starting with Lion, Apple decided to deprecate the system openssl. We
can start requiring users to install their own openssl once OS X doesn't
ship with it anymore.
Right now, we append statistics to files in the stats/ directory for
half of the statistics, whereas we overwrite these files for the other
half. In particular, we append buffer, dirreq, and entry stats and
overwrite exit, connection, and bridge stats.
Appending to files was useful when we didn't include stats in extra-info
descriptors, because otherwise we'd have to copy them away to prevent
Tor from overwriting them.
But now that we include statistics in extra-info descriptors, it makes
no sense to keep the old statistics forever. We should change the
behavior to overwriting instead of appending for all statistics.
Implements #2930.
We'll still need to tweak it so that it looks for includes and
libraries somewhere more sensible than "where we happened to find
them on Erinn's system"; so that tests and tools get built too;
so that it's a bit documented; and so that we actually try running
the output.
Work done with Erinn Clark.
Previously, if tor_addr_to_str() returned NULL, we would reuse the
last value returned by fmt_addr(). (This could happen if we were
erroneously asked to format an AF_UNSPEC address.) Now instead we
return "???".
The problem was that we weren't initializing want_length to 0 before
calling parse_socks() the first time, so it looked like we were
risking an infinite loop when in fact we were safe.
Fixes 3615; bugfix on 0.2.3.2-alpha.
This is the meat of proposal 171: we change circuit_is_acceptable()
to require that the connection is compatible with every connection
that has been linked to the circuit; we update circuit_is_better to
prefer attaching streams to circuits in the way that decreases the
circuits' usefulness the least; and we update link_apconn_to_circ()
to do the appropriate bookkeeping.
Proposal 171 gives us a new syntax for parsing client port options.
You can now have as many FooPort options as you want (for Foo in
Socks, Trans, DNS, NATD), and they can have address:port arguments,
and you can specify the level of isolation on those ports.
Additionally, this patch refactors the client port parsing logic to
use a new type, port_cfg_t. Previously, ports to be bound were
half-parsed in config.c, and later re-parsed in connection.c when
we're about to bind them. Now, parsing a port means converting it
into a port_cfg_t, and binding it uses only a port_cfg_t, without
needing to parse the user-provided strings at all.
We should do a related refactoring on other port types. For
control ports, that'll be easy enough. For ORPort and DirPort,
we'll want to do this when we solve proposal 118 (letting servers
bind to and advertise multiple ports).
This implements tickets 3514 and 3515.
Previously we were using router_get_by_id(foo) to test "do we have a
descriptor that will let us make an anonymous circuit to foo". But
that isn't right for microdescs: we should have been using node_t.
Fixes bug 3601; bugfix on 0.2.3.1-alpha.
Previously, we had an issue where we'd treat an unknown address as
0, which turned into "0.0.0.0", which looked like a rejected
address. This meant in practice that as soon as we started doing
comparisons of unknown uint32 addresses to short policies, we'd get
'rejected' right away. Because of the circumstances under which
this would be called, it would only happen when we had local DNS
cached entries and we were looking to launch new circuits.
Previously, we'd just take all the nodes in EntryNodes, see which
ones were already in the guard list, and add the ones that weren't.
There were some problems there, though:
* We'd add _every_ entry in EntryNodes, and add them in the order
they appeared in the routerlist. This wasn't a problem
until we added the ability to give country-code or IP-range
entries in the EntryNodes set, but now that we did, it is.
(Fix: We now shuffle the entry nodes before adding them; only
add up to 10*NumEntryGuards)
* We didn't screen EntryNodes for the Guard flag. That's okay
if the user has specified two or three entry nodes manually,
but if they have listed a whole subcontinent, we should
restrict ourselves to the entries that are currently guards.
(Fix: separate out the new guard from the new non-guard nodes,
and add the Guards first.)
* We'd prepend new EntryNodes _before_ the already configured
EntryNodes. This could lead to churn.
(Fix: don't prepend these.)
This patch also pre-screens EntryNodes entries for
reachableaddresses/excludenodes, even though we check for that
later. This is important now, since we cap the number of entries
we'll add.
Just looking at the "latest" consensus could give us a microdesc
consensus, if microdescs were enabled. That would make us decide
that every routerdesc was unlisted in the latest consensus and drop
them all: Ouch.
Fixes bug 3113; bugfix on 0.2.3.1-alpha.
The issue was that we overlooked the possibility of reverse DNS success
at the end of connection_ap_handshake_socks_resolved(). Issue discovered
by katmagic, thanks!
Using strncpy meant that if listenaddress were ever >=
sizeof(sockaddr_un.sun_path), we would fail to nul-terminate
sun_path. This isn't a big deal: we never read sun_path, and the
kernel is smart enough to reject the sockaddr_un if it isn't
nul-terminated. Nonetheless, it's a dumb failure mode. Instead, we
should reject addresses that don't fit in sockaddr_un.sun_path.
Coverity found this; it's CID 428. Bugfix on 0.2.0.3-alpha.
I'm not one to insist on C's miserly stack limits, but allocating a
256K array on the stack is too much even for me.
Bugfix on 0.2.1.7-alpha. Found by coverity. Fixes CID # 450.
For some inexplicable reason, Coverity departs from its usual
standards of avoiding false positives here, and warns about all
sscanf usage, even when the formatting strings are totally safe.
Addresses CID # 447, 446.
A couple of places in control.c were using connection_handle_write()
to flush important stuff (the response to a SIGNAL command, an
ERR-level status event) before Tor went down. But
connection_handle_write() isn't meaningful for bufferevents, so we'd
crash.
This patch adds a new connection_flush() that works for all connection
backends, and makes control.c use that instead.
Fix for bug 3367; bugfix on 0.2.3.1-alpha.
libnatpmp-20110618 changed the API that tor-fw-helper used and for a time
tor-fw-helper could not build against the newest libnatpmp. This patch brings
support for libnatpmp to tor-fw-helper.
When we set a networkstatus in the non-preferred flavor, we'd check
the time in the current_consensus. But that might have been NULL,
which could produce a crash as seen in bug 3361.
George Kadianakis notes that if you give crypto_rand_int() a value
above INT_MAX, it can return a negative number, which is not what
the documentation would imply.
The simple solution is to assert that the input is in [1,INT_MAX+1].
If in the future we need a random-value function that can return
values up to UINT_MAX, we can add one.
Fixes bug 3306; bugfix on 0.2.2pre14.
When we added the check for key size, we required that the keys be
128 bytes. But RSA_size (which defers to BN_num_bytes) will return
128 for keys of length 1017..1024. This patch adds a new
crypto_pk_num_bits() that returns the actual number of significant
bits in the modulus, and uses that to enforce key sizes.
Also, credit the original bug3318 in the changes file.
This merge was a bit nontrivial, since I had to write a new
node_is_a_configured_bridge to parallel router_is_a_configured_bridge.
Conflicts:
src/or/circuitbuild.c
If set to 1, Tor will attempt to prevent basic debugging
attachment attempts by other processes. (Default: 1)
Supports Mac OS X and Gnu/Linux.
Sebastian provided useful feedback and refactoring suggestions.
Signed-off-by: Jacob Appelbaum <jacob@appelbaum.net>
When we introduced NEED_KEY_1024 in routerparse.c back in
0.2.0.1-alpha, I forgot to add a *8 when logging the length of a
bad-length key.
Bugfix for 3318 on 0.2.0.1-alpha.
The conflicts were mainly caused by the routerinfo->node transition.
Conflicts:
src/or/circuitbuild.c
src/or/command.c
src/or/connection_edge.c
src/or/directory.c
src/or/dirserv.c
src/or/relay.c
src/or/rendservice.c
src/or/routerlist.c
Previously we did this nearer to the end (in the old_options &&
transition_affects_workers() block). But other stuff cares about
keys being consistent with options... particularly anything which
tries to access a key, which can die in assert_identity_keys_ok().
Fixes bug 3228; bugfix on 0.2.2.18-alpha.
Fixes part of #1297; bugfix on 48e0228f1e,
when circuit_expire_building was changed to assume that timestamp_dirty
was set when a circuit changed purpose to _C_REND_READY. (It wasn't.)
This situation can happen easily if you set 'ORPort auto' and
'AccountingMax'. Doing so means that when you have no ORPort, you
won't be able to set an ORPort in a descriptor, so instead you would
just generate lots of invalid descriptors, freaking out all the time.
Possible fix for 3216; fix on 0.2.2.26-beta.
We had all the code in place to handle this right... except that we
were unconditionally opening a PF_INET socket instead of looking at
sa_family. Ow.
Fixes bug 2574; not a bugfix on any particular version, since this
never worked before.
Most instances were dead code; for those, I removed the assignments.
Some were pieces of info we don't currently plan to use, but which
we might in the future. For those, I added an explicit cast-to-void
to indicate that we know that the thing's unused. Finally, one was
a case where we were testing the wrong variable in a unit test.
That one I fixed.
This resolves bug 3208.
It used to mean "Force": it would tell tor-resolve to ask tor to
resolve an address even if it ended with .onion. But when
AutomapHostsOnResolve was added, automatically refusing to resolve
.onion hosts stopped making sense. So in 0.2.1.16-rc (commit
298dc95dfd), we made tor-resolve happy to resolve anything.
The -F option stayed in, though, even though it didn't do anything.
Oddly, it never got documented.
Found while fixing GCC 4.6 "set, unused variable" warnings.
On win64, sockets are of type UINT_PTR; on win32 they're u_int;
elsewhere they're int. The correct windows way to check a socket for
being set is to compare it with INVALID_SOCKET; elsewhere you see if
it is negative.
On Libevent 2, all callbacks take sockets as evutil_socket_t; we've
been passing them int.
This patch should fix compilation and correctness when built for
64-bit windows. Fixes bug 3270.
We used to regenerate our descriptor whenever we'd get a sighup. This
was caused by a bug in options_transition_affects_workers() that would
return true even if the options were exactly the same. Down the call
path we'd call init_keys(), which made us make a new descriptor which
the authorities would reject, and the node would subsequently fall out
of the consensus.
This patch fixes only the first part of this bug:
options_transition_affects_workers() behaves correctly now. The second
part still wants a fix.
When we configure a new bridge via the controller, don't wait up to ten
seconds before trying to fetch its descriptor. This wasn't so bad when
you listed your bridges in torrc, but it's dreadful if you configure
your bridges via vidalia.
Bumped the char maximum to 512 for HTTPProxyAuthenticator &
HTTPSProxyAuthenticator. Now stripping all '\n' after base64
encoding in alloc_http_authenticator.
Fixed a trivial conflict where this and the ControlSocketGroupWritable
code both added different functions to the same part of connection.c.
Conflicts:
src/or/connection.c
This was harmless, since we only used this for checking for lists of
port values, but it's the principle of the thing.
Fixes 3175; bugfix on 0.1.0.1-rc
This code changes it so that we don't remove bridges immediately when
we start re-parsing our configuration. Instead, we mark them all, and
remove all the marked ones after re-parsing our bridge lines. As we
add a bridge, we see if it's already in the list. If so, we just
unmark it.
This new behavior will lose the property we used to have that bridges
were in bridge_list in the same order in which they appeared in the
torrc. I took a quick look through the code, and I'm pretty sure we
didn't actually depend on that anywhere.
This is for bug 3019; it's a fix on 0.2.0.3-alpha.
Previously, if they changed in torrc during a SIGHUP, all was well,
since we would just clear all transient entries from the addrmap
thanks to bug 1345. But if you changed them from the controller, Tor
would leave old mappings in place.
The VirtualAddrNetwork bug has been here since 0.1.1.19-rc; the
AutomapHosts* bug has been here since 0.2.0.1-alpha.
This bug couldn't happen when TrackExitHosts changed in torrc, since
the SIGHUP to reload the torrc would clear out all the transient
addressmap entries before. But if you used SETCONF to change
TrackExitHosts, old entries would be left alone: that's a bug, and so
this is a bugfix on Tor 0.1.0.1-rc.
If you really want to purge the client DNS cache, the TrackHostExits
mappings, and the virtual address mappings, you should be using NEWNYM
instead.
Fixes bug 1345; bugfix on Tor 0.1.0.1-rc.
Note that this needs more work: now that we aren't nuking the
transient addressmap entries on HUP, we need to make sure that
configuration changes to VirtualAddressMap and TrackHostExits actually
have a reasonable effect.
On IRC, wanoskarnet notes that if we ever do microdesc_free() on a
microdesc that's in the nodelist, we're in trouble. Also, we're in
trouble if we free one that's still in the microdesc_cache map.
This code adds a flag to microdesc_t to note where the microdesc is
referenced from, and checks those flags from microdesc_free(). I
don't believe we have any errors here now, but if we introduce some
later, let's log and recover from them rather than introducing
heisenbugs later on.
Addresses bug 3153.
The old behavior contributed to unreliability when hidden services and
hsdirs had different consensus versions, and so had different opinions
about who should be cacheing hsdir info.
Bugfix on 0.2.0.10-alpha; based on discussions surrounding bug 2732.
The new behavior is to try to rename the old file if there is one there
that we can't read. In all likelihood, that will fail too, but at least
we tried, and at least it won't crash.
Conflicts in various places, mainly node-related. Resolved them in
favor of HEAD, with copying of tor_mem* operations from bug3122_memcmp_022.
src/common/Makefile.am
src/or/circuitlist.c
src/or/connection_edge.c
src/or/directory.c
src/or/microdesc.c
src/or/networkstatus.c
src/or/router.c
src/or/routerlist.c
src/test/test_util.c
Conflicts throughout. All resolved in favor of taking HEAD and
adding tor_mem* or fast_mem* ops as appropriate.
src/common/Makefile.am
src/or/circuitbuild.c
src/or/directory.c
src/or/dirserv.c
src/or/dirvote.c
src/or/networkstatus.c
src/or/rendclient.c
src/or/rendservice.c
src/or/router.c
src/or/routerlist.c
src/or/routerparse.c
src/or/test.c
When configure tor with --enable-bufferevents and
--enable-static-libevent, libevent_openssl would still be linked
dynamically. Fix this and refactor src/or/Makefile.am along the way.
To turn this on, set UseMicrodescriptors to "1" (or "auto" if you
want it on-if-you're-a-client). It should go auto-by-default once
0.2.3.1-alpha is released.
Because of our node logic, directory caches will never use
microdescriptors when they have the right routerinfo available.
See bug 2850 for rationale: it appears that on some busy exits, the OS
decides that every single port is now unusable because they have been
all used too recently.
Previously we ensured that it would get called periodically by doing
it from inside the code that added microdescriptors. That won't work
though: it would interfere with our code that tried to read microdescs
from disk initially. Instead, we should consider rebuilding the cache
periodically, and on startup.
Instead of just saying "boogity boogity!" let's actually warn people
that they need to configure stuff right to be safe, and point them
at instructions for how to do that.
Resolves bug 2474.
Clients and relays haven't used them since early 0.2.0.x. The only
remaining use by authorities learning about new relays ahead of scedule;
see proposal 147 for what we intend to do about that.
We're leaving in an option (FetchV2Networkstatus) to manually fetch v2
networkstatuses, because apparently dnsel and maybe bwauth want them.
This fixes bug 3022.
A v0 HS authority stores v0 HS descriptors in the same descriptor
cache that its HS client functionality uses. Thus, if the HS
authority operator clears its client HS descriptor cache, ALL v0
HS descriptors will be lost. That would be bad.
These functions can return NULL for otherwise-valid values of
time_t. Notably, the glibc gmtime manpage says it can return NULL
if the year if greater than INT_MAX, and the windows MSDN gmtime
page says it can return NULL for negative time_t values.
Also, our formatting code is not guaranteed to correctly handle
years after 9999 CE.
This patch tries to correct this by detecting NULL values from
gmtime/localtime_r, and trying to clip them to a reasonable end of
the scale. If they are in the middle of the scale, we call it a
downright error.
Arguably, it's a bug to get out-of-bounds dates like this to begin
with. But we've had bugs of this kind in the past, and warning when
we see a bug is much kinder than doing a NULL-pointer dereference.
Boboper found this one too.
Previously, it would remove every trackhostexits-derived mapping
*from* xyz.<exitname>.exit; it was supposed to remove every
trackhostexits-derived mapping *to* xyz.<exitname>.exit.
Bugfix on 0.2.0.20-rc: fixes an XXX020 added while staring at bug-1090
issues.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
This once maybe made sense when ExitNodes meant "Here are 3 exits;
use them all", but now it more typically means "Here are 3
countries; exit from there." Using non-Fast/Stable exits created a
potential partitioning opportunity and an annoying stability
problem.
(Don't worry about the case where all of our ExitNodes are non-Fast
or non-Stable: we handle that later in the function by retrying with
need_capacity and need_uptime set to 0.)
The last entry of the *Maxima values in the state file was inflated by a
factor of NUM_SECS_ROLLING_MEASURE (currently 10). This could lead to
a wrong maximum value propagating through the state file history.
When reading the bw history from the state file, we'd add the 900-second
value as traffic that occured during one second. Fix that by adding the
average value to each second.
This bug was present since 0.2.0.5-alpha, but was hidden until
0.2.23-alpha when we started using the saved values.
Some tor relays would report lines like these in their extrainfo
documents:
dirreq-write-history 2011-03-14 16:46:44 (900 s)
This was confusing to some people who look at the stats. It would happen
whenever a relay first starts up, or when a relay has dirport disabled.
Change this so that lines without actual bw entries are omitted.
Implements ticket 2497.
While doing so, get rid of the now unnecessary function
control_signal_act().
Fixes bug 2917, reported by Robert Ransom. Bugfix on commit
9b4aa8d2ab. This patch is loosely based on
a patch by Robert (Changelog entry).
Instead of answering GETINFO requests about our geoip usage only after
running for 24 hours, this patch makes us answer GETINFO requests
immediately. We still round and quantize as before.
Implements bug2711.
Also, refactor the heck out of the bridge usage formatting code. No
longer should we need to do a generate-parse-and-regenerate cycle to
get the controller string, and that lets us simplify the code a lot.
- Document it in the manpage
- Add a changes entry
- No need to log when it is set: we don't log for other options.
- Use doxygen to document the new flag.
- Test truth of C variables with "if (x)", not "if (x == 1)".
- Simplify a complex boolean expression by breaking it up.
We've got millisecond timers now, we might as well use them.
This change won't actually make circuits get expiered with microsecond
precision, since we only call the expiry functions once per second.
Still, it should avoid the situation where we have a circuit get
expired too early because of rounding.
A couple of the expiry functions now call tor_gettimeofday: this
should be cheap since we're only doing it once per second. If it gets
to be called more often, though, we should onsider having the current
time be an argument again.
Since svn r1475/git 5b6099e8 in tor-0.0.6, we have responded to an
exhaustion of all 65535 stream IDs on a circuit by marking that
circuit for close. That's not the right response. Instead, we
should mark the circuit as "too dirty for new circuits".
Of course in reality this isn't really right either. If somebody
has managed to cram 65535 streams onto a circuit, the circuit is
probably not going to work well for any of those streams, so maybe
we should be limiting the number of streams on an origin circuit
concurrently.
Also, closing the stream in this case is probably the wrong thing to
do as well, but fixing that can also wait.
We fixed bug 539 (where directories would say "503" but send data
anyway) back in 0.2.0.16-alpha/0.1.2.19. Because most directory
versions were affected, we added workaround to make sure that we
examined the contents of 503-replies to make sure there wasn't any
data for them to find. But now that such routers are nonexistent,
we can remove this code. (Even if somebody fired up an 0.1.2.19
directory cache today, it would still be fine to ignore data in its
erroneous 503 replies.)
The first was genuinely impossible, I think: it could only happen
when the amount we read differed from the amount we wanted to read
by more than INT_MAX.
The second is just very unlikely: it would give incorrect results to
the controller if you somehow wrote or read more than 4GB on one
edge conn in one second. That one is a bugfix on 0.1.2.8-beta.
In afe414 (tor-0.1.0.1-rc~173), when we moved to
connection_edge_end_errno(), we used it in handling errors from
connection_connect(). That's not so good, since by the time
connection_connect() returns, the socket is no longer set, and we're
supposed to be looking at the socket_errno return value from
connection_connect() instead. So do what we should've done, and
look at the socket_errno value that we get from connection_connect().
Right now, we only consider sending stream-level SENDME cells when we
have completely flushed a connection_edge's outbuf, or when it sends
us a DATA cell. Neither of these is ideal for throughput.
This patch changes the behavior so we now call
connection_edge_consider_sending_sendme when we flush _some_ data from
an edge outbuf.
Fix for bug 2756; bugfix on svn r152.
Resolved nontrivial conflict around rewrite_x_address_for_bridge and
learned_bridge_descriptor. Now, since leanred_bridge_descriptor works
on nodes, we must make sure that rewrite_node_address_for_bridge also
works on nodes.
Conflicts:
src/or/circuitbuild.c
hid_serv_responsible_for_desc_id's return value is never negative, and
there is no need to search through the consensus to find out whether we
are responsible for a descriptor ID before we look in our cache for a
descriptor.
It is important to verify the uptime claim of a relay instead of just
trusting it, otherwise it becomes too easy to blackhole a specific
hidden service. rephist already has data available that we can use here.
Bugfix on 0.2.0.10-alpha.
Partial backport of daa0326aaa .
Resolves bug 2402. Bugfix on 0.2.1.15 (for the part where we switched to
git) and on 0.2.1.30 (for the part where we dumped micro-revisions.)
We want to use the discard port correctly, so a htons() was missing.
Also we need to set it correctly depending on address family.
Review provided by danieldg
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
(Backport from 0.2.2's 5ed73e3807)
rransom noticed that a change of ORPort is just as bad as a change of IP
address from a client's perspective, because both mean that the relay is
not available to them while the new information hasn't propagated.
Change the bug1035 fix accordingly.
Also make sure we don't log a bridge's IP address (which might happen
when we are the bridge authority).
It is often not entirely clear what options Tor was built with, so it
might not be immediately obvious which config file Tor is using when it
found one. Log the config file at startup.
We detect and reject said attempts if there is no chosen exit node or
circuit: connecting to a private addr via a randomly chosen exit node
will usually fail (if all exits reject private addresses), is always
ill-defined (you're not asking for any particular host or service),
and usually an error (you've configured all requests to go over Tor
when you really wanted to configure all _remote_ requests to go over
Tor).
This can also help detect forwarding loop requests.
Found as part of bug2279.
If we got a signed digest that was shorter than the required digest
length, but longer than 20 bytes, we would accept it as long
enough.... and then immediately fail when we want to check it.
Fixes bug 2409; bug in 0.2.2.20-alpha; found by piebeer.
Previously if you wanted to say "All messages except network
messages", you needed to say "[*,~net]" and if you said "[~net]" by
mistake, you would get no messages at all. Now, if you say "[~net]",
you get everything except networking messages.
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
When we stopped using svn, 0.2.1.x lost the ability to notice its svn
revision and report it in the version number. However, it kept
looking at the micro-revision.i file... so if you switched to master,
built tor, then switched to 0.2.1.x, you'd get a micro-revision.i file
from master reported as an SVN tag. This patch takes out the "include
the svn tag" logic entirely.
Bugfix on 0.2.1.15-rc; fixes bug 2402.
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
This patch imposes (very long) limits on the length of a line in a
directory document, and on the length of a certificate. I don't
think it should actually be possible to overrun these remotely,
since we already impose a maximum size on any directory object we're
downloading, but a little defensive programming never hurt anybody.
Roger emailed me that doorss reported these on IRC, but nobody seems
to have put them on the bugtracker.
We need to make sure that the worst thing that a weird consensus param
can do to us is to break our Tor (and only if the other Tors are
reliably broken in the same way) so that the majority of directory
authorities can't pull any attacks that are worse than the DoS that
they can trigger by simply shutting down.
One of these worse things was the cbtnummodes parameter, which could
lead to heap corruption on some systems if the value was sufficiently
large.
This commit fixes this particular issue and also introduces sanity
checking for all consensus parameters.
Our public key functions assumed that they were always writing into a
large enough buffer. In one case, they weren't.
(Incorporates fixes from sebastian)
In dnsserv_resolved(), we carefully made a nul-terminated copy of the
answer in a PTR RESOLVED cell... then never used that nul-terminated
copy. Ouch.
Surprisingly this one isn't as huge a security problem as it could be.
The only place where the input to dnsserv_resolved wasn't necessarily
nul-terminated was when it was called indirectly from relay.c with the
contents of a relay cell's payload. If the end of the payload was
filled with junk, eventdns.c would take the strdup() of the name [This
part is bad; we might crash there if the cell is in a bad part of the
stack or the heap] and get a name of at least length
495[*]. eventdns.c then rejects any name of length over 255, so the
bogus data would be neither transmitted nor altered.
[*] If the name was less than 495 bytes long, the client wouldn't
actually be reading off the end of the cell.
Nonetheless this is a reasonably annoying bug. Better fix it.
Found while looking at bug 2332, reported by doorss. Bugfix on
0.2.0.1-alpha.
