Remove router_update_info_send_unencrypted(), and move its code into the
relevant functions.
Then, re-use an options pointer.
Preparation for testing 29017 and 20918.
Remove some tiny static functions called by router_build_fresh_descriptor(),
and move their code into more relevant functions.
Then, give router_update_{router,extra}info_descriptor_body identical layouts.
Preparation for testing 29017 and 20918.
Make sure that these static functions aren't passed NULL.
If they are, log a BUG() warning, and return an error.
Preparation for testing 29017 and 20918.
Split the body of router_build_fresh_descriptor() into static functions,
by inserting function prologues and epilogues between existing sections.
Write a new body for router_build_fresh_descriptor() that calls the new
static functions.
Initial refactor with no changes to the body of the old
router_build_fresh_descriptor(), except for the split.
Preparation for testing 29017 and 20918.
When ExtraInfoStatistics is 0, stop including bandwidth usage statistics,
GeoIPFile hashes, ServerTransportPlugin lines, and bridge statistics
by country in extra-info documents.
Fixes bug 29018; bugfix on 0.2.4.1-alpha (and earlier versions).
Rewrite service_intro_point_new() to take a node_t. Since
node_get_link_specifier_smartlist() supports IPv6 link specifiers,
this refactor adds IPv6 addresses to onion service descriptors.
Part of 23576, implements 26992.
Also, when we log about a failure from base32_decode(), we now
say that the length is wrong or that the characters were invalid:
previously we would just say that there were invalid characters.
Follow-up on 28913 work.
Hope is this will make it easier to test on the live tor network.
Does not need to be merged if we don't want to, but will come in handy
for researchers.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
Redefine the set of bootstrap phases to allow display of finer-grained
progress in the early connection stages of connecting to a relay.
This includes adding intermediate phases for proxy and PT connections.
Also add a separate new phase to indicate obtaining enough directory
info to build circuits so we can report that independently of actually
initiating an ORCONN to build the first application circuit.
Previously, we would claim to be connecting to a relay when we had
merely finished obtaining directory info.
Part of ticket 27167.
Replace a few invocations of control_event_bootstrap() with calls from
the bootstrap tracker subsystem. This mostly leaves behavior
unchanged. The actual behavior changes come in the next commit.
Part of ticket 27167.
Add a tracker for bootstrap progress, tracking events related to
origin circuit and ORCONN states. This uses the ocirc_event and
orconn_event publish-subscribe subsystems.
Part of ticket 27167.
Add a publish-subscribe subsystem to publish messages about changes to
origin circuits.
Functions in circuitbuild.c and circuitlist.c publish messages to this
subsystem.
Move circuit event constants out of control.h so that subscribers
don't have to include all of control.h to take actions based on
messages they receive.
Part of ticket 27167.
Add a publish-subscribe subsystem to publish messages about changes to
OR connections.
connection_or_change_state() in connection_or.c and
control_event_or_conn_event() in control.c publish messages to this
subsystem via helper functions.
Move state constants from connection_or.h to orconn_state.h so that
subscribers don't have to include all of connection_or.h to take
actions based on changes in OR connection state. Move event constants
from control.h for similar reasons.
Part of ticket 27167.
This patch adds support for the new STATUS message that PT's can emit
from their standard out. The STATUS message uses the `config_line_t` K/V
format that was recently added in Tor.
See: https://bugs.torproject.org/28846
This patch changes the LOG pluggable transport message to use the recent
K/V parser that landed in Tor. This allows PT's to specify the log
severity level as well as the message. A mapping between the PT log
severity levels and Tor's log serverity level is provided.
See: https://bugs.torproject.org/28846
Previously we had decoded the asn.1 to get a public key, and then
discarded the asn.1 so that we had to re-encode the key to store it
in the onion_pkey field of a microdesc_t or routerinfo_t.
Now we can just do a tor_memdup() instead, which should be loads
faster.
Previously, we would decode the PEM wrapper for keys twice: once in
get_next_token, and once later in PEM decode. Now we just do all of
the wrapper and base64 stuff in get_next_token, and store the
base64-decoded part in the token object for keys and non-keys alike.
This change should speed up parsing slightly by letting us skip a
bunch of stuff in crypto_pk_read_*from_string(), including the tag
detection parts of pem_decode(), and an extra key allocation and
deallocation pair.
Retaining the base64-decoded part in the token object will allow us
to speed up our microdesc parsing, since it is the asn1 portion that
we actually want to retain.
This patch changes our EVENT_TRANSPORT_LOG event to be EVENT_PT_LOG. The
new message includes the path to the PT executable instead of the
transport name, since one PT binary can include multiple transport they
sometimes might need to log messages that are not specific to a given
transport.
See: https://bugs.torproject.org/28179
This patch changes our process_t's exit_callback to return a boolean
value. If the returned value is true, the process subsystem will call
process_free() on the given process_t.
See: https://bugs.torproject.org/28179
This patch moves the remaining code from subprocess.{h,c} to more
appropriate places in the process.c and process_win32.c module.
We also delete the now empty subprocess module files.
See: https://bugs.torproject.org/28179
This patch adds support for the "LOG" protocol message from a pluggable
transport. This allows pluggable transport developers to relay log
messages from their binary to Tor, which will both emit them as log
messages from the Tor process itself, but also pass them on via the
control port.
See: https://bugs.torproject.org/28180
See: https://bugs.torproject.org/28181
See: https://bugs.torproject.org/28182
This patch makes the managed proxy subsystem use the process_t data
structure such that we can get events from the PT process while Tor is
running and not just when the PT process is being configured.
See: https://bugs.torproject.org/28179
The strcmp_len() function was somewhat misconceived, since we're
only using it to test whether a length+extent string is equal to a
NUL-terminated string or not. By simplifying it and making it
inlined, we should be able to make it a little faster.
(It *does* show up in profiles.)
Closes ticket 28856.
I believe we originally added this for "just in case" safety, but it
isn't actually needed -- we never copy uninitialized stack here.
What's more, this one memset is showing up on our startup profiles,
so we ought to remove it.
Closes ticket 28852.
Add the bootstrap tag name to the log messages, so people
troubleshooting connection problems can look up a symbol instead of a
number. Closes ticket 28731.
When retrying all SOCKS connection because new directory information just
arrived, do not BUG() if a connection in state AP_CONN_STATE_RENDDESC_WAIT is
found to have a usable descriptor.
There is a rare case when this can happen as detailed in #28669 so the right
thing to do is put that connection back in circuit wait state so the
descriptor can be retried.
Fixes#28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
This helper function marks an entry connection as pending for a circuit and
changes its state to AP_CONN_STATE_CIRCUIT_WAIT. The timestamps are set to
now() so it can be considered as new.
No behaviour change, this helper function will be used in next commit.
Part of #28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the helper function connection_ap_mark_as_waiting_for_renddesc()
introduced in previous commit everywhere in the code where an AP connection
state is transitionned to AP_CONN_STATE_RENDDESC_WAIT.
Part of #28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
Specifically, if the consensus is older than the (estimted or
measured) release date for this version of tor, we assume that the
required versions may have changed in between that consensus and
this release.
Implements ticket 27735 and proposal 297.
This patch has routers use the same canonicalization logic as
authorities when encoding their family lists. Additionally, they
now warn if any router in their list is given by nickname, since
that's error-prone.
This patch also adds some long-overdue tests for family formatting.
Prop298 says that family entries should be formatted with
$hexids in uppercase, nicknames in lower case, $hexid~names
truncated, and everything sorted lexically. These changes implement
that ordering for nodefamily.c.
We don't _strictly speaking_ need to nodefamily.c formatting use
this for prop298 microdesc generation, but it seems silly to have
two separate canonicalization algorithms.
This representation is meant to save memory in microdescriptors --
we can't use it in routerinfo_t yet, since those families need to be
encoded losslessly for directory voting to work.
This representation saves memory in three ways:
1. It uses only one allocation per family. (The old way used a
smartlist (2 allocs) plus one strdup per entry.)
2. It stores identity digests in binary, not hex.
3. It keeps families in a canonical format, memoizes, and
reference-counts them.
Part of #27359.
This is part of 28422, so we don't have to call
consider_hibernation() once per second when we're dormant.
This commit does not remove delayed shutdown from hibernate.c: it
uses it as a backup shutdown mechanism, in case the regular shutdown
timer mechanism fails for some reason.
With the new refresh_service_descriptor() function we had both
refresh_service_descriptor() and update_service_descriptor() which is basically
the same thing.
This commit renames update_service_descriptor() to
update_service_descriptor_intro_points() to make it clear it's not a generic
refresh and it's only about intro points.
Commit changes no code.
Before this commit, we would create the descriptor signing key certificate
when first building the descriptor.
In some extreme cases, it lead to the expiry of the certificate which triggers
a BUG() when encoding the descriptor before uploading.
Ticket #27838 details a possible scenario in which this can happen. It is an
edge case where tor losts internet connectivity, notices it and closes all
circuits. When it came back up, the HS subsystem noticed that it had no
introduction circuits, created them and tried to upload the descriptor.
However, in the meantime, if tor did lack a live consensus because it is
currently seeking to download one, we would consider that we don't need to
rotate the descriptors leading to using the expired signing key certificate.
That being said, this commit does a bit more to make this process cleaner.
There are a series of things that we need to "refresh" before uploading a
descriptor: signing key cert, intro points and revision counter.
A refresh function is added to deal with all mutable descriptor fields. It in
turn simplified a bit the code surrounding the creation of the plaintext data.
We keep creating the cert when building the descriptor in order to accomodate
the unit tests. However, it is replaced every single time the descriptor is
uploaded.
Fixes#27838
Signed-off-by: David Goulet <dgoulet@torproject.org>
When storing a descriptor in the client cache, if we are about to replace an
existing descriptor, make sure to close every introduction circuits of the old
descriptor so we don't have leftovers lying around.
Ticket 27471 describes a situation where tor is sending an INTRODUCE1 cell on
an introduction circuit for which it doesn't have a matching intro point
object (taken from the descriptor).
The main theory is that, after a new descriptor showed up, the introduction
points changed which led to selecting an introduction circuit not used by the
service anymore thus for which we are unable to find the corresponding
introduction point within the descriptor we just fetched.
Closes#27471.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It won't be used if there are no authorized client configured. We do that so
we can easily support the addition of a client with a HUP signal which allow
us to avoid more complex code path to generate that cookie if we have at least
one client auth and we had none before.
Fixes#27995
Signed-off-by: David Goulet <dgoulet@torproject.org>
Both client and service had their own code for this. Consolidate into one
place so we avoid duplication.
Closes#27549
Signed-off-by: David Goulet <dgoulet@torproject.org>
When freeing a configuration object from confparse.c in
dump_config(), we need to call the appropriate higher-level free
function (like or_options_free()) and not just config_free().
This only happens with options (since they're the one where
options_validate allocates extra stuff) and only when running
--dump-config with something other than minimal (since
OPTIONS_DUMP_MINIMAL doesn't hit this code).
Fixes bug 27893; bugfix on 0.3.2.1-alpha.
It differs from the rest of the rephist code in that it's actually
necessary for Tor to operate, so it should probably go somewhere
else. I'm not sure where yet, so I'll leave it in the same
directory, but give it its own file.
Since this is completely core functionality, I'm putting it in
core/mainloop, even though it depends on feature/hibernate. We'll
have to sort that out in the future.
The main.c code is responsible for initialization and shutdown;
the mainloop.c code is responsible for running the main loop of Tor.
Splitting the "generic event loop" part of mainloop.c from the
event-loop-specific part is not done as part of this patch.
The parts for handling cell formats should be in src/core/or.
The parts for handling onionskin queues should be in src/core/or.
Only the crypto wrapper belongs in src/core/crypto.
When sending the INTRODUCE1 cell, we acquire the needed data for the cell but
if the RP node_t has invalid data, we'll fail the send and completely kill the
SOCKS connection.
Instead, close the rendezvous circuit and return a transient error meaning
that Tor can recover by selecting a new rendezvous point. We'll also do the
same when we are unable to encode the INTRODUCE1 cell for which at that point,
we'll simply take another shot at a new rendezvous point.
Fixes#27774
Signed-off-by: David Goulet <dgoulet@torproject.org>
