In previous versions of Tor, ExitPolicy accept6/reject6 * produced
policy entries for IPv4 and IPv6 wildcard addresses.
To reduce operator confusion, change accept6/reject6 * to only produce
an IPv6 wildcard address.
Resolves bug #16069.
Patch on 2eb7eafc9d and a96c0affcb (25 Oct 2012),
released in 0.2.4.7-alpha.
This controls the circuit dirtyness reset behavior added for Tor
Browser's user experience fix (#15482). Unlike previous iterations
of this patch, the tunable actually works, and is documented.
When this is set, and Tor is running as a relay, it will not
generate or load its secret identity key. You can manage the secret
identity key with --keygen. Implements ticket 16944.
"option to prevent guard,exit,hsdir flag assignment"
"A node will never receive the corresponding flag unless
that node is specified in the
TestingDirAuthVote{Exit,Guard,HSDir} list, regardless of
its uptime, bandwidth, exit policy, or DirPort".
Patch modified by "teor": VoteOnHidServDirectoriesV2
is now obsolete, so TestingDirAuthVoteHSDir always
votes on HSDirs.
Closes ticket 14882. Patch by "robgjansen".
Commit message and changes file by "teor"
with quotes from "robgjansen".
Fix an error in the manual page and comments for
TestingDirAuthVoteHSDir, which suggested that a
HSDir required "ORPort connectivity". While this is true,
it is in no way unique to the HSDir flag. Of all the flags,
only HSDirs need a DirPort configured in order for the
authorities to assign that particular flag.
Fixed as part of 14882. Patch by "teor".
Bugfix on 0.2.6.3 (f9d57473e1 on 10 January 2015).
This is a way to specify the amount of introduction points an hidden service
can have. Maximum value is 10 and the default is 3.
Fixes#4862
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When set, this limits the maximum number of simultaneous streams per
rendezvous circuit on the server side of a HS, with further RELAY_BEGIN
cells being silently ignored.
This can be modified via "HiddenServiceMaxStreamsCloseCircuit", which
if set will cause offending rendezvous circuits to be torn down instead.
Addresses part of #16052.
Parse the file just before voting and apply its information to the
provided vote_routerstatus_t. This follows the same logic as when
dirauths parse bwauth files.
This incidentally makes unix SocksSocket support all the same options
as SocksPort.
This patch breaks 'SocksSocket 0'; next will restore it.
Resolves 14254.
TestingDirAuthVoteHSDir ensures that authorities vote the HSDir flag
for the listed relays regardless of uptime or ORPort connectivity.
Respects the value of VoteOnHidServDirectoriesV2.
Partial fix for bug 14067.
If we're not a relay, we ignore it.
If it's set to 1, we obey ExitPolicy.
If it's set to 0, we force ExitPolicy to 'reject *:*'
And if it's set to auto, then we warn the user if they're running an
exit, and tell them how they can stop running an exit if they didn't
mean to do that.
Fixes ticket 10067
This allows hidden services to disable the anti-scanning feature
introduced in 0.2.6.2-alpha. With this option not set, a connection
to an unlisted port closes the circuit. With this option set, only
a RELAY_DONE cell is sent.
Closes ticket #14084.
The two statistics are:
1. number of RELAY cells observed on successfully established
rendezvous circuits; and
2. number of .onion addresses observed as hidden-service
directory.
Both statistics are accumulated over 24 hours, obfuscated by rounding
up to the next multiple of a given number and adding random noise,
and written to local file stats/hidserv-stats.
Notably, no statistics will be gathered on clients or services, but
only on relays.
Authorities are no longer voting on Named, so specifying nodes by
nickname isn't a clever thing to do. (Not that it ever was!) So
remove the documentation that suggests that you should do it.
Additionally, add proper cross-references to our __node__ lists, and
explain about the optional $ before identity digests.
Also, the oxford comma: endorsed by Steven Pinker, my spouse, and my
11th grade English teacher.
Closes 13381.
Add the TestingDirAuthVoteExit option, a list of nodes to vote Exit for,
regardless of their uptime, bandwidth, or exit policy.
TestingTorNetwork must be set for this option to have any effect.
Works around an issue where authorities would take up to 35 minutes to
give nodes the Exit flag in a test network, despite short consensus
intervals. Partially implements ticket 13161.
This implements the meat of #12899. This commit should simply remove the
parts of Tor dirauths used to check whether a relay was supposed to be
named or not, it doesn't yet convert to a new mechanism for
reject/invalid/baddir/badexiting relays.
This is in preparation for a big patch series removing the entire Naming
system from Tor. In its wake, the approved-routers file is being
deprecated, and a replacement option to allow only pre-approved routers
is not being implemented.
When we merged the cookieauthfile creation logic in 33c3e60a37, we
accidentally took out this feature. Fixes bug 12864, bugfix on
0.2.5.1-alpha.
Also adds an ExtORPortCookieAuthFileGroupReadable, since there's no
reason not to.
I don't know whether we missed these or misclassified them when we
first made the "DIRECTORY AUTHORITY SERVER OPTIONS" section, but they
really belong there.
If we can't detect the physical memory, the new default is 8 GB on
64-bit architectures, and 1 GB on 32-bit architectures.
If we *can* detect the physical memory, the new default is
CLAMP(256 MB, phys_mem * 0.75, MAX_DFLT)
where MAX_DFLT is 8 GB on 64-bit architectures and 2 GB on 32-bit
architectures.
You can still override the default by hand. The logic here is simply
trying to choose a lower default value on systems with less than 12 GB
of physical RAM.
This means that tor can run without needing to communicate with ioctls
to the firewall, and therefore doesn't need to run with privileges to
open the /dev/pf device node.
A new TransProxyType is added for this purpose, "pf-divert"; if the user
specifies this TransProxyType in their torrc, then the pf device node is
never opened and the connection destination is determined with getsockname
(as per pf(4)). The default behaviour (ie., when TransProxyType is "default"
when using the pf firewall) is still to assume that pf is configured with
rdr-to rules.
This isn't on by default; to get it, you need to set "TransProxyType
ipfw". (The original patch had automatic detection for whether
/dev/pf is present and openable, but that seems marginally fragile.)
We are searching @CONFDIR@ before $HOME, but the documentation
implied otherwise.
I screwed this up in f5e86bcd6c, when I
first documented the $HOME/.torrc possibility.
Fix for bug 9213; bugfix on 0.2.3.18-rc.
In the end this required a slightly nasty hack using a dummy anchor as
an option heading in order to make the "Other recognized __flags__"
line indent properly.
Fixes bug 11061; Bugfix on 61d740ed.
We have ignored any ports listed here since 80365b989 (0.0.7rc1),
but we didn't warn the user that we were ignoring them. This patch
adds a warning if you put explicit ports in any of the options
{Socks,Dir}Policy or AuthDir{Reject,Invalid,BadDir,BadExit}. It
also adjusts the manpage to say that ports are ignored.
Fixes ticket 11108.
These options were added back in 0.1.2.5-alpha, but no longer make any
sense now that all directories support tunneled connections and
BEGIN_DIR cells. These options were on by default; now they are
always-on.
This is a fix for 10849, where TunnelDirConns 0 would break hidden
services -- and that bug arrived, I think, in 0.2.0.10-alpha.
(There is no longer meaningfully any such thing as a HS authority,
since we stopped uploading or downloading v0 hs descriptors in
0.2.2.1-alpha.)
Implements #10881, and part of #10841.
Explicitly include bridges, and note that we archive and publish all
descriptors.
(We are not yet publishing ContactInfo lines contained in bridge
descriptors, but maybe we'll want to do that soon, so let's err on the
side of caution here.)
Related to #9854.
According to the manpage, bridges use P256 for conformity and relays
use P224 for speed. But skruffy points out that we've gotten it
backwards in the code.
In this patch, we make the default P256 for everybody.
Fixes bug 9780; bugfix on 0.2.4.8-alpha.
For now, round down to the nearest 10 minutes. Later, eliminate entirely by
setting a consensus parameter.
(This rounding is safe because, in 0.2.2, where the timestamp mattered,
REND_REPLAY_TIME_INTERVAL was a nice generous 60 minutes.)
