DisableNetwork is a subset of net_is_disabled(), which is (now) a
subset of should_delay_dir_fetches().
Some of these changes are redundant with others higher or lower in
the call stack. The ones that I think are behavior-relevant are
listed in the changes file. I've also added comments in a few
places where the behavior is subtle.
Fixes bug 12062; bugfix on various versions.
It _should_ work, and I don't see a reason that it wouldn't, but
just in case, add a 10 second timer to make tor die with an
assertion failure if it's supposed to exit but it doesn't.
This function was never about 'finishing' the event loop, but rather
about making sure that the code outside the event loop would be run
at least once.
Sometimes when we call exit(), it's because the process is
completely hopeless: openssl has a broken AES-CTR implementation, or
the clock is in the 1960s, or something like that.
But sometimes, we should return cleanly from tor_main() instead, so
that embedders can keep embedding us and start another Tor process.
I've gone through all the exit() and _exit() calls to annotate them
with "exit ok" or "XXXX bad exit" -- the next step will be to fix
the bad exit()s.
First step towards 23848.
By convention, a function that frobs a foo_t should be called
foo_frob, and it should have a foo_t * as its first argument. But
for many of the buf_t functions, the buf_t was the final argument,
which is silly.
Our convention is that functions which manipulate a type T should be
named T_foo. But the buffer functions were super old, and followed
all kinds of conventions. Now they're uniform.
Here's the perl I used to do this:
\#!/usr/bin/perl -w -i -p
s/read_to_buf\(/buf_read_from_socket\(/;
s/flush_buf\(/buf_flush_to_socket\(/;
s/read_to_buf_tls\(/buf_read_from_tls\(/;
s/flush_buf_tls\(/buf_flush_to_tls\(/;
s/write_to_buf\(/buf_add\(/;
s/write_to_buf_compress\(/buf_add_compress\(/;
s/move_buf_to_buf\(/buf_move_to_buf\(/;
s/peek_from_buf\(/buf_peek\(/;
s/fetch_from_buf\(/buf_get_bytes\(/;
s/fetch_from_buf_line\(/buf_get_line\(/;
s/fetch_from_buf_line\(/buf_get_line\(/;
s/buf_remove_from_front\(/buf_drain\(/;
s/peek_buf_startswith\(/buf_peek_startswith\(/;
s/assert_buf_ok\(/buf_assert_ok\(/;
The service needs the latest SRV and set of relays for the best accurate
hashring to upload its descriptor to so it needs a live consensus thus don't
do anything until we have it.
Fixes#23331
Signed-off-by: David Goulet <dgoulet@torproject.org>
This cache keeps track of the state of intro points which is needed when we
have failures when using them. It is similar to the failure cache of the
legacy system.
At this commit, it is unused but initialized, cleanup and freed.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add the main loop entry point to the HS service subsystem. It is run every
second and make sure that all services are in their quiescent state after that
which means valid descriptors, all needed circuits opened and latest
descriptors have been uploaded.
For now, only v2 is supported and placeholders for v3 actions for that main
loop callback.
Signed-off-by: David Goulet <dgoulet@torproject.org>
The condition was always true meaning that we would reconsider updating our
directory information every 2 minutes.
If valid_until is 6am today, then now - 24h == 1pm yesterday which means that
"valid_until < (now - 24h)" is false. But at 6:01am tomorrow, "valid_until <
(now - 24h)" becomes true which is that point that we shouldn't trust the
consensus anymore.
Fixes#23091
Signed-off-by: David Goulet <dgoulet@torproject.org>
Introduces hs_init() located in hs_common.c which initialize the entire HS v3
subsystem. This is done _prior_ to the options being loaded because we need to
allocate global data structure before we load the configuration.
The hs_free_all() is added to release everything from tor_free_all().
Note that both functions do NOT handle v2 service subsystem but does handle
the common interface that both v2 and v3 needs such as the cache and
circuitmap.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Add the hs_config.{c|h} files contains everything that the HS subsystem needs
to load and configure services. Ultimately, it should also contain client
functions such as client authorization.
This comes with a big refactoring of rend_config_services() which has now
changed to only configure a single service and it is stripped down of the
common directives which are now part of the generic handler.
This is ground work for prop224 of course but only touches version 2 services
and add XXX note for version 3.
Signed-off-by: David Goulet <dgoulet@torproject.org>
These statistics were largely ununsed, and kept track of statistical information
on things like how many time we had done TLS or how many signatures we had
verified. This information is largely not useful, and would only be logged
after receiving a SIGUSR1 signal (but only if the logging severity level was
less than LOG_INFO).
* FIXES#19871.
* REMOVES note_crypto_pk_op(), dump_pk_op(), and pk_op_counts from
src/or/rephist.c.
* REMOVES every external call to these functions.
Previously we could sometimes change our signing key, but not
regenerate the certificates (signing->link and signing->auth) that
were signed with it. Also, we would regularly replace our TLS x.509
link certificate (by rotating our TLS context) but not replace our
signing->link ed25519 certificate. In both cases, the resulting
inconsistency would make other relays reject our link handshakes.
Fixes two cases of bug 22460; bugfix on 0.3.0.1-alpha.
This gives an indication in the log that Tor was built with Rust
support, as well as laying some groundwork for further string-returning
APIs to be converted to Rust
Failure to do this caused an assertion failure with #22246 . This
assertion failure can be triggered remotely, so we're tracking it as
medium-severity TROVE-2017-002.
One (HeapEnableTerminationOnCorruption) is on-by-default since win8;
the other (PROCESS_DEP_DISABLE_ATL_THUNK_EMULATION) supposedly only
affects ATL, which (we think) we don't use. Still, these are good
hygiene. Closes ticket 21953.
Checking all of these parameter lists for every single connection every second
seems like it could be an expensive waste.
Updating globally cached versions when there is a new consensus will still
allow us to apply consensus parameter updates to all existing connections
immediately.
Accomplished via the following:
1. Use NETINFO cells to determine if both peers will agree on canonical
status. Prefer connections where they agree to those where they do not.
2. Alter channel_is_better() to prefer older orconns in the case of multiple
canonical connections, and use the orconn with more circuits on it in case
of age ties.
Also perform some hourly accounting on how many of these types of connections
there are and log it at info or notice level.
This unifies CircuitIdleTimeout and PredictedCircsRelevanceTime into a single
option, and randomizes it.
It also gives us control over the default value as well as relay-to-relay
connection lifespan through the consensus.
Conflicts:
src/or/circuituse.c
src/or/config.c
src/or/main.c
src/test/testing_common.c
This defense will cause Cisco, Juniper, Fortinet, and other routers operating
in the default configuration to collapse netflow records that would normally
be split due to the 15 second flow idle timeout.
Collapsing these records should greatly reduce the utility of default netflow
data for correlation attacks, since all client-side records should become 30
minute chunks of total bytes sent/received, rather than creating multiple
separate records for every webpage load/ssh command interaction/XMPP chat/whatever
else happens to be inactive for more than 15 seconds.
The defense adds consensus parameters to govern the range of timeout values
for sending padding packets, as well as for keeping connections open.
The defense only sends padding when connections are otherwise inactive, and it
does not pad connections used solely for directory traffic at all. By default
it also doesn't pad inter-relay connections.
Statistics on the total padding in the last 24 hours are exported to the
extra-info descriptors.
This patch ensures that Tor checks if a given compression method is
supported before printing the version string when calling `tor
--library-versions`.
Additionally, we use the `tor_compress_supports_method()` to check if a
given version is supported for Tor's start-up version string, but here
we print "N/A" if a given compression method is unavailable.
See: https://bugs.torproject.org/21662
This patch refactors the `torgzip` module to allow us to extend a common
compression API to support multiple compression backends.
Additionally we move the gzip/zlib code into its own module under the
name `compress_zlib`.
See https://bugs.torproject.org/21664
This patch changes the way we decide when to check for whether it's time
to rotate and/or expiry our onion keys. Due to proposal #274 we can now
have the keys rotate at different frequencies than before and we thus
do the check once an hour when our Tor daemon is running in server mode.
This should allow us to quickly notice if the network consensus
parameter have changed while we are running instead of having to wait
until the current parameters timeout value have passed.
See: See: https://bugs.torproject.org/21641
This patch adds a new timer that is executed when it is time to expire
our current set of old onion keys. Because of proposal #274 this can no
longer be assumed to be at the same time we rotate our onion keys since
they will be updated less frequently.
See: https://bugs.torproject.org/21641
This patch turns `MIN_ONION_KEY_LIFETIME` into a new function
`get_onion_key_lifetime()` which gets its value from a network consensus
parameter named "onion-key-rotation-days". This allows us to tune the
value at a later point in time with no code modifications.
We also bump the default onion key lifetime from 7 to 28 days as per
proposal #274.
See: https://bugs.torproject.org/21641
We need to call it before nt_service_parse_options(), since
nt_service_parse_options() can call back into nt_service_main(),
which calls do_main_loop().
Fixes bug 21356; bugfix on 0.2.9.1-alpha.
Currently, this code doesn't actually have the contexts behave
differently, (except for the legacy context), but it does switch
back and forth between them nicely.
The new HS circuitmap API replaces old public functions as follows:
circuit_clear_rend_token -> hs_circuitmap_remove_circuit
circuit_get_rendezvous -> hs_circuitmap_get_rend_circ
circuit_get_intro_point -> hs_circuitmap_get_intro_circ_v2
circuit_set_rendezvous_cookie -> hs_circuitmap_register_rend_circ
circuit_set_intro_point_digest -> hs_circuitmap_register_intro_circ_v2
This commit also removes the old rendinfo code that is now unused.
It also fixes the broken rendinfo unittests.
This patch doesn't cover every case; omitted cases are marked with
"XXXX prop271", as usual. It leaves both the old interface and the
new interface for guard status notification, since they don't
actually work in the same way: the new API wants to be told when a
circuit has failed or succeeded, whereas the old API wants to know
when a channel has failed or succeeded.
I ran into some trouble with directory guard stuff, since when we
pick the directory guard, we don't actually have a circuit to
associate it with. I solved that by allowing guard states to be
associated with directory connections, not just circuits.
This patch is just:
* Code movement
* Adding headers here and there as needed
* Adding a bridges_free_all() with a call to it.
It breaks compilation, since the bridge code needed to make exactly
2 calls into entrynodes.c internals. I'll fix those in the next
commit.
