we can turn it into an autobool later if we have some way for it
to make a decision.
(patch possibly got lost when nickm merged #6770; or maybe nickm meant
for it to be this way. i'm not sure.)
Add handle_fw_helper_output(), a function responsible for parsing the
output of tor-fw-helper. Refactor tor_check_port_forwarding() and
run_scheduled_events() accordingly too.
We now issue warnings when we get control output from tor-fw-helper,
and we log the verbose output of tor-fw-helper in LOG_INFO.
Conflicts:
src/common/util.c
get_lines_from_handle() is a multiplatform function which drains lines
from a stream and stuffs it into a smartlist. It's useful for
line-based protocols, like the one managed proxy and the tor-fw-helper
protocols.
See #4771 for rationale.
Note that this patch does not take suggested changes in #4470 into
account and keeps treating AuthDirHasIPv6Connectivity as an
AUTOBOOL. Thus, bug fixes for that are included here as well.
This is a fix on master, unreleased as of now.
Also, make node_get_prim_orport() indicate in its return value whether
a valid OR port was copied or not.
Maybe we should make it legal to pass ap_out==NULL?
Also, do this only for clients, explicitly.
Also, give the flag a value every time we set consensus. We used to
touch it only when ClientPreferIPv6ORPort was set, which was wrong.
extend_info_from_node() used to use the primary OR port (i.e. IPv4)
unless the node had routerinfo. Now that we have IPv6 addresses in
microdescs we may want to use them.
Note that this patch changes using r->cache_info.identity_digest into
using node->identity. I count on these being well synchronised, or
things would break in other ways. Right?
Add ClientUseIPv6 and ClientPreferIPv6ORPort configuration options.
Use "preferred OR port" for all entry nodes, not only for bridges.
Mark bridges with "prefer IPv6 OR port" if an IPv6 address is
configured in Bridge line and ClientPreferIPv6ORPort is set.
Mark relays with "prefer IPv6 OR port" if an IPv6 address is found in
descriptor and ClientPreferIPv6ORPort is set.
Filter "preferred OR port" through the ClientUseIPv6 config option. We
might want to move this test to where actual connection is being set
up once we have a fall back mechanism in place.
Have only non-servers pick an IPv6 address for the first hop: We
don't want relays to connect over IPv6 yet. (IPv6 has never been used
for second or third hops.)
Implements ticket 5535.
Generate and store all supported microdescriptor formats. Generate
votes with one "m" line for each format. Only "m" lines with version
info matching chosen consensus method will be voted upon.
An optimisation would be to combine "m" lines with identical hashes,
i.e. instead of "m 1,2,3 H1" and "m 4,5 H1", say "m 1,2,3,4,5 H1".
Define new new consensus method 14 adding "a" lines to vote and
consensus documents.
From proposal 186:
As with other data in the vote derived from the descriptor, the
consensus will include whichever set of "a" lines are given by the
most authorities who voted for the descriptor digest that will be
used for the router.
This patch implements this.
Allow one-hop directory fetching circuits the full "circuit build timeout"
period, rather than just half of it, before failing them and marking
the relay down. This fix should help reduce cases where clients declare
relays (or worse, bridges) unreachable because the TLS handshake takes
a few seconds to complete.
Fixes bug 6743 (one piece of bug 3443); bugfix on 0.2.2.2-alpha, where
we changed the timeout from a static 30 seconds.
We've had over two months to fix them, and didn't. Now we need
0.2.3.x stable. Yes, it would be cool to get this working in
0.2.3.x, but not at the expense of delaying every other feature that
_does_ work in 0.2.3.x. We can do a real fix in 0.2.4.
This is important, since otherwise an attacker can use timing info
to probe the internal network.
Also, add an option (ExtendAllowPrivateAddresses) so that
TestingTorNetwork won't break.
Fix for bug 6710; bugfix on all released versions of Tor.
Move extend_info_from_router() from circuitbuild.c to router.c and
make it static.
Add get_configured_bridge_by_orports_digest() and have
get_configured_bridge_by_routerinfo() and
node_is_a_configured_bridge() use it. We now consider all OR ports of
a bridge when looking for it.
Move node_get_*_orport to nodelist.c.
Fix a cut'n'paste error in header of nodelist.h.
Add node_assert_ok().
Add router_get_all_orports(). It's duplicating code from
node_get_all_orports(). Worth fixing at the cost of complicating the
API slightly?
There was some code in the "err:" block that would always log a
warning, reporting an "unknown error" if we hadn't set err_msg. But
there were also plenty of "goto err" blocks that did their own
logging, and never set err_msg at all. Now we should only log when
we have an error message to log.
This fixes bug 6638, from no released Tor version.
Failure to do this would lead to double-free cases and similar,
especially when the exit's DNS was broken. See bug 6472 for full
details; this is a fix for 6472.
Anonymous patch from "cypherpunks" on trac.
Long ago, before we had cell queues, it was necessary to maybe call
connection_handle_write() from connectino_write_to_buf_impl() on OR
connections, so that we wouldn't get into a loop of reading infinite
amounts of data and queueing it all on an outbuf before bothering to
write any data.
If that doesn't sounds like what our code does now, you're right:
right now, we won't stick more than OR_CONN_HIGHWATER bytes of cells
on an outbuf, and we won't suck more than CELL_QUEUE_HIGHWATER_SIZE
cells off any edge connection. So, there's no more call for that
code.
Removing this code will simplify our data flow, and that should be
something we can all get behind.
Apparently, (void)writev is not enough to suppress the "you are
ignoring the return value!" warnings on Linux. Instead, remove the
whole warning/error logic when compiling openbsd_malloc for Tor: we
can't use it.
This is done to avoid spurious warns. Additional log lines are also
added to try to track down the codepaths where we are somehow overcounting
success counts.
The warning fixes are:
- Only define issetugid if it's missing.
- Explicitly ignore the return value of writev.
- Explicitly cast the retval of readlink() to int.
The 64-bit problems are related to just storing a size_t in an int. Not cool! Use a size_t instead.
Fix for bug 6379. Bugfix on 0.2.0.20-rc, which introduced openbsd-malloc.
This patch extracts the inner part of config_register_addressmaps --
the part that knows about detecting wildcard addresses addresses --
and makes it into a new function. The new function is deliberately
not moved or reindented, so that the diff is smaller.
I need this to fix bug 6244.
Extend cells aren't allowed to have a stream_id, but we were only
blocking them when they had a stream_id that corresponded to a
connection. As far as I can tell, this change is harmless: it will
make some kinds of broken clients not work any more, but afaik nobody
actually make a client that was broken in that way.
Found while hunting for other places where we made the same mistake
as in 6271.
Bugfix on d7f50337c1 back from May 2003, which introduced
telescoping circuit construction into 0.0.2pre8.
Thanks to the changes we started making with SocksPort and friends
in 0.2.3.3-alpha, any of our code that did "if (options->Sockport)"
became wrong, since "SocksPort 0" would make that test true whereas
using the default SocksPort value would make it false. (We didn't
actually do "if (options->SockPort)" but we did have tests for
TransPort. When we moved DirPort, ORPort, and ControlPort over to
the same system in 0.2.3.9-alpha, the problem got worse, since our
code is littered with checks for DirPort and ORPort as booleans.
This code renames the current linelist-based FooPort options to
FooPort_lines, and adds new FooPort_set options which get set at
parse-and-validate time on the or_options_t. FooPort_set is true
iff we will actually try to open a listener of the given type. (I
renamed the FooPort options rather than leave them alone so that
every previous user of a FooPort would need to get inspected, and so
that any new code that forgetfully uses FooPort will need fail to
compile.)
Fix for bug 6507.
With this patch, I dump the old kludge of using magic negative
numbers to indicate unknown bandwidths. I also compute each node's
weighted bandwidth exactly once, rather than computing it once in
a loop to compute the total weighted bandwidth and a second time in
a loop to find which one we picked.
Previously, we had incremented rand_bw so that when we later tested
"tmp >= rand_bw", we wouldn't have an off-by-one error. But instead,
it makes more sense to leave rand_bw alone and test "tmp > rand_bw".
Note that this is still safe. To take the example from the bug1203
writeup: Suppose that we have 3 nodes with bandwidth 1. So the
bandwidth array is { 1, 1, 1 }, and the total bandwidth is 3. We
choose rand_bw == 0, 1, or 2. With the first iteration of the loop,
tmp is now 1; with the second, tmp is 2; with the third, tmp is 3.
Now that our check is tmp > rand_bw, we will set i in the first
iteration of the loop iff rand_bw == 0; in the second iteration of
the loop iff rand_bw == 1, and in the third iff rand_bw == 2.
That's what we want.
Incidentally, this change makes the bug 6538 fix more ironclad: once
rand_bw is set to UINT64_MAX, tmp > rand_bw is obviously false
regardless of the value of tmp.
The old approach, because of its "tmp >= rand_bw &&
!i_has_been_chosen" check, would run through the second part of the
loop slightly slower than the first part. Now, we remove
i_has_been_chosen, and instead set rand_bw = UINT64_MAX, so that
every instance of the loop will do exactly the same amount of work
regardless of the initial value of rand_bw.
Fix for bug 6538.
This should make our preferred solution to #6538 easier to
implement, avoid a bunch of potential nastiness with excessive
int-vs-double math, and generally make the code there a little less
scary.
"But wait!" you say. "Is it really safe to do this? Won't the
results come out differently?"
Yes, but not much. We now round every weighted bandwidth to the
nearest byte before computing on it. This will make every node that
had a fractional part of its weighted bandwidth before either
slighty more likely or slightly less likely. Further, the rand_bw
value was only ever set with integer precision, so it can't
accurately sample routers with tiny fractional bandwidth values
anyway. Finally, doing repeated double-vs-uint64 comparisons is
just plain sad; it will involve an implicit cast to double, which is
never a fun thing.
This gives us a few benefits:
1) make -j clean all
this will start working, as it should. It currently doesn't.
2) increased parallel build
recursive make will max out at number of files in a directory,
non-recursive make doesn't have such a limitation
3) Removal of duplicate information in make files,
less error prone
I've also slightly updated how we call AM_INIT_AUTOMAKE, as the way
that was used was not only deprecated but will be *removed* in the next
major automake release (1.13).... so probably best that we can continue
to bulid tor without requiring old automake.
(see http://www.gnu.org/software/automake/manual/html_node/Public-Macros.html )
For more reasons why, see resources such as:
http://miller.emu.id.au/pmiller/books/rmch/
In 0.2.3.18-rc, we started warning on this case while building a
list of missing microdescriptor digests. That turned out to spam
the logs; instead let's warn at parse time.
Partial fix for bug 6404.
The spec requires that every router in a microdesc consensus have an
m line; we weren't obeying that spec.
This creates a new consensus method (13) to allow voting to continue
to work right. Partial fix for bug 6404; fix on 0.2.2.6-alpha.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
We can end up in dirserv_orconn_tls_done() with a node missing
routerinfo in at least two cases -- command_process_certs_cell() and
connection_or_check_valid_tls_handshake() -- and probably more.
You can say "struct foo_t" as much as you want, but you'd better not
have "typedef struct foo_t foo_t" more than once.
Fix for bug 6416. Bug not in any released version of Tor.
This avoids a possible crash bug in flush_from_first_active_circuit.
Fixes bug 6341; bugfix on 0.2.2.7-alpha.
Bug reported and fixed by a pseudonymous user on IRC.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
The SMARTLIST_FOREACH macro is more convenient than BEGIN/END when
you have a nice short loop body, but using it for long bodies makes
your preprocessor tell the compiler that all the code is on the same
line. That causes grief, since compiler warnings and debugger lines
will all refer to that one line.
So, here's a new style rule: SMARTLIST_FOREACH blocks need to be
short.
- Add a changes/ file.
- Make it compile under --enable-gcc-warnings.
- Update the file-level documentation of src/or/transports.c.
- Only update descriptor if at least a managed proxy was configured.
- Add our external IP address to the extra-info descriptor instead of 0.0.0.0.
This could result in bizarre window values. Report and patch
contributed pseudymously. Fixes part of bug 6271. This bug was
introduced before the first Tor release, in svn commit r152.
(bug 6271, part a.)
This reverts commit c32ec9c425.
It turns out the two sides of the circuit don't actually stay in sync,
so it is perfectly normal for the circuit window on the exit relay to
grow to 2000+. We should fix that bug and then reconsider this patch.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
We were doing a tor_strclear() on client_keys_str when it might not
even be set.
Fix for bug 6255; bug not in any release of Tor. Thanks to katmagic
for finding this one!
With glibc 2.15 and clang 3.0, I get warnings from where we use the
strcpsn implementation in the header as strcspn(string, "="). This
is apparently because clang sees that part of the strcspn macro
expands to "="[2], and doesn't realize that that part of the macro
is only evaluated when "="[1] != 0.
The functions parse_{s,c}method_line() were using
tor_addr_port_lookup() which is capable of doing DNS lookups. DNS
lookups should not be necessary when parsing {C,S}METHOD lines.
We now catch bare {s that should be on the previous line with a do,
while, if, or for, and elses that should share a line with their
preceding }.
That is,
if (foo)
{
and
if (foo) {
...
}
else
are now detected.
We should think about maybe making Tor uncrustify-clean some day,
but configuring uncrustify is an exercise in bizarreness, and
reformatting huge gobs of Tor is always painful.
We can treat this case as an EAGAIN (probably because of an
unexpected internal NUL) rather than a crash-worthy problem.
Fixes bug 6225, again. Bug not in any released version of Tor.
Because the string output was no longer equal in length to
HEX_ERRNO_SIZE, the write() call would add some extra spaces and
maybe a NUL, and the NUL would trigger an assert in
get_string_from_pipe.
Fixes bug 6225; bug not in any released version of Tor.
The code that detected the source of a remapped address checked that
an address mapping's source was a given rewrite rule if addr_orig had
no .exit, and addr did have a .exit after processing that rule. But
addr_orig was formatted for logging: it was not the original address
at all, but rather was the address escaped for logging and possibly
replaced with "[scrubbed]".
This new logic will correctly set ADDRMAPSRC_NONE in the case when the
address starts life as a .exit address, so that AllowDotExit can work
again.
Fixes bug 6211; bugfix on 0.2.3.17-beta
It turns out this can happen. Even though there is no reason for
connections to be marked but reading, we leave them reading anyway,
so warning here is unwarranted. Let's turn that back on once we do
something sensible and disable reading when we mark. Bugfix for
6203 on Tor 0.2.3.17-beta.
Thanks to cypherpunks for pointing out the general stupidity of the
original code here.
Now it's an orthodox "goto err/done" exit path, and it isn't some
screwy thing where we stick err/done at the end of a loop and
duplicate our cleanup code.
Previously, a directory would check the latest NS consensus for
having the signatures the client wanted, and use that consensus's
valid_until time to set the HTTP lifetime. With this patch, the
directory looks at NS consensus or the microdesc consensus,
depending on what the client asked for.
I saw 72% on a test run with 26 circuits. 70% might be a little close to the
line. That, or min_circs is too low and we need to be more patient. We still
need to test/simulate more.
The defense counts the circuit failure rate for each guard for the past N
circuits. Failure is defined as the ability to complete a first hop, but not
finish completing the circuit all the way to the exit.
If the failure rate exceeds a certain amount, a notice is emitted.
If it exceeds a greater amount, a warn is emitted and the guard is disabled.
These values are governed by consensus parameters which we intend to tune as
we perform experiments and statistical simulations.
The warning message of validate_pluggable_transports_config() is
superseded by the changes in the warning message of
connection_or_connect() when the proxy credentials can't be found.
There is a bug causing busy loops in Libevent and infinite loops in
the Shadow simulator. A connection that is marked for close, wants
to flush, is held open to flush, but is rate limited (the token
bucket is empty) triggers the bug.
This commit fixes the bug. Details are below.
This currently happens on read and write callbacks when the active
socket is marked for close. In this case, Tor doesn't actually try
to complete the read or write (it returns from those methods when
marked), but instead tries to clear the connection with
conn_close_if_marked(). Tor will not close a marked connection that
contains data: it must be flushed first. The bug occurs when this
flush operation on the marked connection can not occur because the
connection is rate-limited (its write token bucket is empty).
The fix is to detect when rate limiting is preventing a marked
connection from properly flushing. In this case, it should be
flagged as read/write_blocked_on_bandwidth and the read/write events
de-registered from Libevent. When the token bucket gets refilled, it
will check the associated read/write_blocked_on_bandwidth flag, and
add the read/write event back to Libevent, which will cause it to
fire. This time, it will be properly flushed and closed.
The reason that both read and write events are both de-registered
when the marked connection can not flush is because both result in
the same behavior. Both read/write events on marked connections will
never again do any actual reads/writes, and are only useful to
trigger the flush and close the connection. By setting the
associated read/write_blocked_on_bandwidth flag, we ensure that the
event will get added back to Libevent, properly flushed, and closed.
Why is this important? Every Shadow event occurs at a discrete time
instant. If Tor does not properly deregister Libevent events that
fire but result in Tor essentially doing nothing, Libevent will
repeatedly fire the event. In Shadow this means infinite loop,
outside of Shadow this means wasted CPU cycles.
This is a feature removal: we no longer fake any ciphersuite other
than the not-really-standard SSL_RSA_FIPS_WITH_3DES_EDE_CBC_SHA
(0xfeff). This change will let servers rely on our actually
supporting what we claim to support, and thereby let Tor migrate to
better TLS ciphersuites.
As a drawback, Tor instances that use old openssl versions and
openssl builds with ciphers disabled will no longer give the
"firefox" cipher list.
Manually removed range 0.116.0.0 to 0.119.255.255 which Maxmind says is
assigned to AT. This is very likely a bug in their database, because
0.0.0.0/8 is a reserved range.
From what I can tell, this configuration is usually a mistake, and
leads people to think that all their traffic is getting proxied when
in fact practically none of it is. Resolves the issue behind "bug"
4663.
The function is not guaranteed to NUL-terminate its output. It
*is*, however, guaranteed not to generate more than two bytes per
multibyte character (plus terminating nul), so the general approach
I'm taking is to try to allocate enough space, AND to manually add a
NUL at the end of each buffer just in case I screwed up the "enough
space" thing.
Fixes bug 5909.
This feature can make Tor relays less identifiable by their use of the
mod_ssl DH group, but at the cost of some usability (#4721) and bridge
tracing (#6087) regressions.
We should try to turn this on by default again if we find that the
mod_ssl group is uncommon and/or we move to a different DH group size
(see #6088). Before we can do so, we need a fix for bugs #6087 and
Resolves ticket #5598 for now.
These include:
- Having a weird in_addr that can't be initialized with {0}
- Needing INVALID_HANDLE_VALUE instead of -1 for file handles.
- Having a weird dependent definition for struct stat.
- pid is signed, not unsigned.
These stats are currently discarded, but we might as well
hard-disable them on bridges, to be clean.
Fix for bug 5824; bugfix on 0.2.1.17-rc.
Patch originally by Karsten Loesing.
Also, try to resolve some doxygen issues. First, define a magic
"This is doxygen!" macro so that we take the correct branch in
various #if/#else/#endifs in order to get the right documentation.
Second, add in a few grouping @{ and @} entries in order to get some
variables and fields to get grouped together.
This code shouldn't have any effect in 0.2.3, since we already accept
(and handle) data received while we are expecting a renegotiation.
(That's because the 0.2.3.x handshake _does_ have data there instead of
the renegotiation.)
I'm leaving it in anyway, since if it breaks anything, we'll want it
broken in master too so we can find out about it. I added an XXX023
comment so that we can come back later and fix that.
This fixes a DoS issue where a client could send so much data in 5
minutes that they exhausted the server's RAM. Fix for bug 5934 and
6007. Bugfix on 0.2.0.20-rc, which enabled the v2 handshake.
This fixes a warning in efb8a09f, where Debain Lenny's GCC doesn't get
that
for (i=0; i<3; ++i) {
const char *p;
switch(i) {
case 0:
p="X"; break;
case 1:
p="Y"; break;
case 2:
p="Z"; break;
}
printf("%s\n", p);
}
will never try to print an uninitialezed value.
Found by buildbots. Bug in no released versions of Tor.
It appears that when OpenSSL negotiates a 1.1 or 1.2 connection, and it
decides to renegotiate, the client will send a record with version "1.0"
rather than with the current TLS version. This would cause the
connection to fail whenever both sides had OpenSSL 1.0.1, and the v2 Tor
handshake was in use.
As a workaround, disable TLS 1.1 and TLS 1.2. When a later version of
OpenSSL is released, we can make this conditional on running a fixed
version of OpenSSL.
Alternatively, we could disable TLS 1.1 and TLS 1.2 only on the client
side. But doing it this way for now means that we not only fix TLS with
patched clients; we also fix TLS when the server has this patch and the
client does not. That could be important to keep the network running
well.
Fixes bug 6033.
This solves bug 5283, where client traffic could get sent over the
same circuit as an anonymized connection to a directory, even if
that circuit used an exit node unsuitable for clients. By marking
the directory connection as needs_internal, we ensure that the
(non-internal!) client-traffic connection won't be sent over the
same circuit.
Conflicts:
src/test/test_util.c
Merge the unit tests; I added some when I did this branch against
0.2.2, and then the test format changed and master added more tests.
Conflicts:
src/common/compat.h
Conflict was between replacement of MS_WINDOWS with _WIN32 in
master, and with removal of file_handle from tor_mmap_t struct in
close_file_mapping branch (for bug 5951 fix).
It turns out that if you set the third argument of
__attribute__(format) to 0, GCC and Clang will check the format
argument without expecting to find variadic arguments. This is the
correct behavior for vsnprintf, vasprintf, and vscanf.
I'm hoping this will fix bug 5969 (a clang warning) by telling clang that
the format argument to tor_vasprintf is indeed a format string.
On Windows, getsockname() on a nonblocking apparently won't work
until the connection is done connecting. On XP, it seems to fail by
reporting success and declaring that your address is INADDR_ANY. On the
Win8 preview, though, it fails more loudly and says WSAEINVAL.
Fix for bug 5374; bugfix on 0.1.1.14-alpha.
The parent of "/foo" is "/"; and "/" is its own parent.
This would cause Tor to fail if you tried to have a PF_UNIX control
socket in the root directory. That would be a stupid thing to do
for other reasons, but there's no reason to fail like _this_.
Bug found by Esteban Manchado Velázquez. Fix for bug 5089; bugfix on
Tor 0.2.2.26-beta. Unit test included.
Roger explains at
http://archives.seul.org/tor/talk/Nov-2011/msg00209.html :
"If you list your bridge as part of your family in the relay
descriptor, then everybody can learn your bridge fingerprint, and
they can look up your bridge's descriptor (and thus location) at
the bridge directory authority."
Now, we can't stop relays from listing bridges, but we can warn when
we notice a bridge listing anybody, which might help some.
This fixes bug 4657; it's a fix on 0.2.0.3-alpha, where bridges were
first introduced.
To hit this leak, you need to be a relay that gets a RESOLVE request
or an exit node getting a BEGIN or RESOLVE request. You must either
have unconfigured (and unconfigurable) nameservers, or you must have
somehow set DisableNetwork after a network request arrived but
before you managed to process it.
So, I doubt this is reached often. Still, a leak's a leak. Fix for
bug 5916; bugfix on 0.2.3.9-alpha and 0.1.2.1-alpha.
%f is correct; %lf is only needed with scanf. Apparently, on some
old BSDs, %lf is deprecated.
Didn't we do this before? Yes, we did. But we only got the
instances of %lf, not more complicated things like %.5lf . This
patch tries to get everything.
Based on a patch for 3894 by grarpamp.
These errors usually mean address exhaustion; reporting them as such
lets clients adjust their load to try other exits.
Fix for bug 4710; bugfix on 0.1.0.1-rc, which started using
END_STREAM_REASON_RESOURCELIMIT.
(When the correct answer is given in terms of seconds since the
epoch, it's hard to be sure that it really is the right answer
just by reading the code.)
* It seems parse_http_time wasn't parsing correctly any date with commas (RFCs
1123 and 850). Fix that.
* It seems parse_http_time was reporting the wrong month (they start at 0, not
1). Fix that.
* Add some tests for parse_http_time, covering all three formats.
Silences the log message:
[warn] {BUG} _connection_mark_unattached_ap(): Bug: stream (marked at connection_edge.c:2224) sending two socks replies?
after the client triggered the "Tor is not an HTTP Proxy" response.
No additional socks reply was sent, though.
Previously, we only did this check at startup, which could lead to
us holding a guard indefinitely, and give weird results. Fixes bug
5380; bugfix on 0.2.1.14-rc.
(Patch by Roger; changes file and commit message by Nick)
Previously, we skipped everything that got invoked from
options_init_from_torrc. But some of the stuff in
options_act_reversible and options_act is actually important, like
reopening the logs.
Now, a SIGHUP always makes the effects of an options_set() happen,
even though the options haven't changed.
Fix for bug 5095; bugfix on 0.2.1.9-alpha, which introduced
__ReloadTorrcOnSIGHUP.
This would happen if the deliver window could become negative
because of an nonexistent connection. (Fortunately, _that_ can't
occur, thanks to circuit_consider_sending_sendme. Still, if we
change our windowing logic at all, we won't want this to become
triggerable.) Fix for bug 5541. Bugfix on 4a66865d, back from
0.0.2pre14. asn found this. Nice catch, asn!
We've been only treating SW_SERVER_HELLO_A as meaning that an SSL
handshake was happening. But that's not right: if the initial
attempt to write a ServerHello fails, we would get a callback in
state SW_SERVER_HELLO_B instead.
(That's "instead" and not "in addition": any failed attempt to write
the hello will fail and cause the info callback not to get written.)
Fix for bug 4592; bugfix on 0.2.0.13-alpha.
This tells the windows headers to give us definitions that didn't
exist before XP -- like the ones that we need for IPv6 support.
See bug #5861. We didn't run into this issue with mingw, since
mingw doesn't respect _WIN32_WINNT as well as it should for some of
its definitions.
MSVC warns if you declare a function as having a "int foo" argument
and then implement it with a "const int foo" argument, even though
the latter "const" is not a part of the function's interface.
Instead, allow packagers to put a 'TOR_BUILD_TAG' field in the
server descriptor to indicate a platform-specific value, if they
need to. (According to weasel, this was his use for the git- tag
previously.)
This is part of 2988
For uname-based detection, we now give only the OS name (e.g.,
"Darwin", "Linux".) For Windows, we give only the Operating System
name as inferred from dw(Major|Minor)version, (e.g., "Windows XP",
"Windows 7"), and whether the VER_NT_SERVER flag is set.
For ticket 2988.
This time, I follow grarpamp's suggestion and move the check for
.exit+AllowDotExit 0 to the top of connection_ap_rewrite_and_attach,
before any rewriting occurs. This way, .exit addresses are
forbidden as they arrive from a socks connection or a DNSPort
request, and not otherwise.
It _is_ a little more complicated than that, though. We need to
treat any .exit addresses whose source is TrackHostExits as meaning
that we can retry without that exit. We also need to treat any
.exit address that comes from an AutomapHostsOnResolve operation as
user-provided (and thus forbidden if AllowDotExits==0), so that
transitioning from AllowDotExits==1 to AllowDotExits==0 will
actually turn off automapped .exit addresses.
This patch changes the total serverdesc threshold from 25% to 75%
and the exit threshold from 33% to 50%. The goal is to make
initially constructed circuits less horrible, and to make initial
less awful (since fetching directory information in parallel with
whatever the user is trying to do can hurt their performance).
Implements ticket 3196.
We were doing an O(n) strlen in router_get_extrainfo_hash() for
every one we tried to parse. Instead, have
router_get_extrainfo_hash() take the length of the extrainfo as an
argument, so that when it's called from
extrainfo_parse_from_string(), it doesn't do a strlen() over the
whole pile of extrainfos.
Now that the pt code logs mp->argv[0] all over the place, we need to
be sure to set up mp->argv in our tests.
Bugfix on e603692adc, not in any released version.
If the authorities agreed on a sufficiently bad bwweightscale value
(<=0 or == INT32_MAX), the bandwidth algorithm could make the voters
assert while computing the consensus.
Fix for bug5786; bugfix on 0.2.2.17-alpha
The underlying strtoX functions handle overflow by saturating and
setting errno to ERANGE. If the min/max arguments to the
tor_parse_* functions are equal to the minimum/maximum of the
underlying type, then with the old approach, we wouldn't treat a
too-large value as genuinely broken.
Found this while looking at bug 5786; bugfix on 19da1f36 (in Tor
0.0.9), which introduced these functions.
(Note: It makes sense to use tor-gencert on Windows for testing
purposes only. If you are a directory authority operator, and you
are contemplating running tor-gencert on a Windows box in an actual
production environment, you are probably making a mistake.)
We had been checking for EINVAL, but that means that SOCK_* isn't
supported, not that the syscall itself is missing.
Bugfix on 0.2.3.1-alpha, which started to use accept4.
This is how IPv6 says "0.0.0.0" and something we will have to
translate into a globally reachable address before putting it in a
descriptor.
The fix is a short term solution until a real one is implemented.
Closes#5146.
I think that the trailing __ got added in false analogy to
HAVE_MACRO__func__, HAVE_MACRO__FUNC__, and HAVE_MACRO__FUNCTION__.
But those macros actually indicate the presence of __func__,
__FUNC__, and __FUNCTION__ respectively. The __ at the end of
HAVE_EXTERN_ENVIRON_DECLARED would only be appropriate if the
environ were declared__, whatever that means.
(As a side-note, HAVE_MACRO__func__ and so on should probably be
renamed HAVE_MACRO___func__ and so on. But that can wait.)
This is an identifier renaming only.
If the client uses a v2 cipherlist on the renegotiation handshake,
it looks as if they could fail to get a good cert chain from the
server, since they server would re-disable certificate chaining.
This patch makes it so the code that make the server side of the
first v2 handshake special can get called only once.
Fix for 4591; bugfix on 0.2.0.20-rc.
They boil down to:
- MS_WINDOWS is dead and replaced with _WIN32, but we let a few
instances creep in when we merged Esteban's tests.
- Capitalizing windows header names confuses mingw.
- #ifdef 0 ain't C.
- One unit test wasn't compiled on windows, but was being listed
anyway.
- One unit test was checking for the wrong value.
Gisle Vanem found and fixed the latter 3 issues.
Fixes bug #4528 "read_to_buf_tls(): Inconsistency in code".
This check was added back in 0.1.0.3-rc, but somehow we forgot to
leave it in when we refactored read_to_buf_tls in 0.1.0.5-rc.
(patch by Arturo; commit message and changes file by nickm)
Instead of checking for 'rejected' and calling everything else okay,
let's check for 'outdated' and call everythign else a problem. This
way we don't risk missing future errors so much.
When logging a message that _looks_ like an error message at info, we
should mention that it isn't really a problem.
The bump from miniupnpc-1.5 to 1.6 changes the definition of
two functions used by tor-fw-helper-upnp.c, upnpDiscover() and
UPNP_AddPortMapping(). This patch addresses this and adds a
check in configure.in for backwards compatibility.
Thanks to Nickolay Kolchin-Semyonov for some hints.
X-Tor-Bug-URL: https://trac.torproject.org/projects/tor/ticket/5434
X-Gentoo-Bug-URL: https://bugs.gentoo.org/show_bug.cgi?id=376621
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
Previously, we would reset it at the drop of a hat -- every time a second
passes without any of the intro-point circs already launched for the
service failing.
Fixes bug 4607.
In general, whenever we can, we should be doing
base64_decode(buf, sizeof(buf), s, strlen(s)),
and not
base_64_decode(buf, expr1, s, expr2)
where we hope that expr1 is a good name for the size of buf and expr2
is a good formula for the length of the base64 expression in s.
Fixes coverity CID 508: coverity scan doesn't like checking a
variable for non-NULL after it has been definitely dereferenced.
This should take us back down to zero coverity issues.
* Document fmt_addr_impl() and friends.
* Parenthesize macro arguments.
* Rename get_first_listener_addrport_for_pt() to
get_first_listener_addrport_string().
* Handle port_cfg_t with no_listen.
* Handle failure of router_get_active_listener_port_by_type().
* Add an XXX to router_get_active_listener_port_by_type().
This is just refactoring work here. The old logic was kind of
convoluted, especially after the bug 5572 fix. We don't actually need to
distinguish so many cases here. Dropping detection of the
"!old_options || !old_options->DynamicDHGroups" case is fine because
that's the same that we'd do for clients.
Also add a changes file for bug 5572.
The message only means that we're publishing a new descriptor when we
are actually in some kind of server mode, and publication is on.
Fix for bug 3942; bugfix on 0.2.3.2-alpha.
This fixes a side-channel attack on the (fortunately unused!)
BridgePassword option for bridge authorities. Fix for bug 5543;
bugfix on 0.2.0.14-alpha.
Introduce get_first_listener_addrport_for_pt() which returns a string
containing the addrport of the first listener we could find. Use it to
form the TOR_PT_ORPORT managed proxy protocol line.
This is ticket 2479. Roger's original explanation was:
We have a series of bugs where relays publish a descriptor within
12 hours of their last descriptor, but the authorities drop it
because it's not different "enough" from the last one and it's
too close to the last one.
The original goal of this idea was to a) reduce the number of new
descriptors authorities accept (and thus have to store) and b)
reduce the total number of descriptors that clients and mirrors
fetch. It's a defense against bugs where relays publish a new
descriptor every minute.
Now that we're putting out one consensus per hour, we're doing
better at the total damage that can be caused by 'b'.
There are broader-scale design changes that would help here, and
we've had a trac entry open for years about how relays should
recognize that they're not in the consensus, or recognize when
their publish failed, and republish sooner.
In the mean time, I think we should change some of the parameters
to make the problem less painful.
When we started RefuseUnknownExits back in 0.2.2.11-alpha, we
started making exits act like they cache directory info (since they
need an up-to-date idea of who is really a router). But this
included fetching needless (unrecognized) authorities' certs, which
doesn't make any sense for them.
This is related to, but not necessarily the same as, the issue that
Ian reported for bug #2297.
(This patch is based on a patch from a user who I believe has asked
not to be named. If I'm wrong about that, please add the
appropriate name onto the changelog.)
==
Nick here. I tweaked this patch a little to make it apply cleanly to
master, to extract some common code into a function, and to replace
snprintf with tor_snprintf.
-- nickm
One of our unit tests checks that they behave correctly (giving an
error) when the base is negative. But there isn't a guarantee that
strtol and friends actually handle negative bases correctly.
Found by Coverity Scan; fix for CID 504.
Coverity doesn't like the fact that we were storing the value of
parse_config_line_from_str() but not checking it in a couple of
cases.
Fixes CID 505 and 506.
Calling crypto_cipher_free(NULL) is always safe, since (by
convention) all of our xyz_free() functions treat xyz_free(NULL) as
a no-op.
Flagged by coverity scan; fixes CID 508 and 509.
A previous commit in the 5527 branch had moved
router_get_mutable_by_digest(digest_rcvd) to happen before we did
tor_assert(digest_rcvd), which would have defeated the purpose of
the assert.
Specifically, I believe it dates back to when extend cells had address:port
but no digest in them. The special edge case is certainly not worth the
complexity these days.
* This assertion fails when executing the whole suite, but not when executing
this test by itself
* Ideally I'd prefer starting with a guaranteed empty directory, but it's not
very important in this case as non-existence of other paths is being checked
explicitly
