Increment failure counts only when circuits close without having been built.
Reset failure counts only on the second, and when circuits are done building.
svn:r847
Move writing of pidfile after daemonizing, and also after setting the [ug]id:
This means that the tor user needs write priviliges to the pidfile location.
It needs it for unlinking the pidfile anyway.
svn:r846
bugfix: keep going when a circ fails in circuit_n_conn_open
(make circuit_enumerate_by_naddr_nport obsolete)
bugfix: make circuit_n_conn_open only look at circ's that start at us
bugfix: only try circuit_n_conn_open if we're an OP. Otherwise we
expect connections to always already be up.
bugfix: when choosing path length, pay attention to whether the directory
says a router is down.
bugfix: when picking good exit, skip routers which are known to be down
(more work needs to be done on this one)
svn:r838
- Exit policies now support bitmasks (18.0.0.0/255.0.0.0) and bitcounts
18.0.0.0/8. Policies are parsed on startup, not when comparing to them.
- desired_path_len is now part of an opaque cpath_build_state_t structure.
- END_REASON_EXITPOLICY cells no longer include a port.
- RELAY_COMMAND_CONNECTED cells now include the IP address we've connected
to.
- connection_edge now has a client_dns cache to remember resolved addresses.
It gets populated by RELAY_COMMAND_CONNECTED cells and END_REASON_EXITPOLICY
cells. It gets used by connection_ap_handshake_send_begin. We don't
compare it to exit policies yet.
svn:r812
is a the first step in computing hops one step at a time. Next, we move
the responsibility for calling onion_extend_cpath into circuit.c
(Later, we may want to special-case onion_extend_cpath to treat entry
and exit routers differently.)
svn:r792
Also:
- Refactor socks request into a separate struct
- Add a separate 'waiting for circuit' state to AP connections
between 'waiting for socks' and 'open'.
Arma: can you check out the XXX's I've added to connection_edge? I may
be mishandling some async and close logic.
svn:r783
Allow some slop (currently 3 minutes) when checking certificate validity.
Change certificate lifetime from 1 year to 2 days. Since we
regenerate regularly (we regenerate regularly, right??), this
shouldn't be a problem.
Have directories reject descriptors published too far in the future
(currently 30 minutes). If dirservs don't do this:
0) Today is January 1, 2000.
1) A very skewed server publishes descriptor X with a declared
publication time of August 1, 2000.
2) The directory includes X.
3) Because of certificate lifetime issues, nobody can use the
skewed server.
4) The server fixes its skew, and goes to republish a new descriptor Y
with publication time of January 1, 2000.
5) But because the directory already has a "more recent" descriptor X,
it rejects descriptor "Y" as superseded!
This patch should make step 2 go away.
svn:r658
setuid, because after we setuid we don't have the priviledges we
need to setgid anymore, duh. merged switch_user() and
switch_group() into switch_id(), since that code has to be wound
together.
- return -1 from switch_id() if it's not defined to do anything else.
- moved daemoinize(), write_pidfile(), and switch_id() from main.c to
util.c
svn:r656
setuid and setgid respectively, and die if it can't.
(If the User option is set, tor will setgid to the user's gid as well.)
This happens after the pidfile is created, so that in cases where tor
needs to be root to work with the pidfile, it will at least be able to
create it, although it won't be able to delete it. That sucks, but
it's somewhat better than not being able to create the pidfile in the
first place.
svn:r652
not when we're closing the stream.
this lets us put a payload in the end cell if we want to,
to describe why we're closing the stream.
there are still some places where we don't send the end cell
immediately. i need to track them down. but it's a low priority,
since i've made it send the end cell when we close the stream if
we haven't already sent it.
svn:r640
If DebugLogFile is specified, log to it at -l debug
If LogFile is specified, log to it at the -l from the commandline
(default info)
If no LogFile *and* not a Daemon, then log to stdout.
Make conn->s = -1 by default (this might break things)
When kill -USR1, prefer to log at INFO, but make sure they always see it.
svn:r596
correctly based on how configure was run
- cause tor to guess the location of torrc more intelligently
- cause cause src/config/torrc and src/conf/sample-server-torrc to be
generated with contents that are correct for the way configure was
run
- cause "make install" to put torrc, sample-server-torrc, and
dirservers somewhere intelligent
svn:r587
our log() conflicts with log(3)
distribute only the correct files from doc/ and src/config/
sometimes laptops go back in time. i guess that's ok for now.
and bump the version number because we're live.
svn:r544
Improve debugging output on fingerprint checking.
Make sure to add our own fingerprint to the fingerprint list _before_
adding our own descriptor, or else we'll reject ourself.
Don't call a directory invalid just because we have a newer descriptor
for some router.
Use router_get_dir_hash to generate hashes for signed directories.
Make sure we add our own descriptor successfully.
Don't fall-through on failed base64-endode.
svn:r514
fix a variety of seg faults
don't try to list OPs in running-routers
write cached-directory to disk when rebuilding the dir
on boot, dirservers load approved-routers file
on boot, dirservers load cached directory file
svn:r508
ERR is if something fatal just happened
WARNING is something bad happened, but we're still running. The bad thing
is either a bug in the code, an attack or buggy protocol/implementation
of the remote peer, etc. The operator should examine the bad thing and
try to correct it.
(No error or warning messages should be expected. I expect most people
to run on -l warning eventually.)
NOTICE is never ever used.
INFO means something happened (maybe bad, maybe ok), but there's nothing
you need to (or can) do about it.
DEBUG is for everything louder than INFO.
svn:r486
redo all the config files for the new format (we'll redo them again soon)
fix (another! yuck) segfault in log_fn when input is too large
tor_tls_context_new() returns -1 for error, not NULL
fix segfault in check_conn_marked() on conn's that die during tls handshake
make ORs also initialize conn from router when we're the receiving node
make non-dirserver ORs upload descriptor to every dirserver on startup
add our local address to the descriptor
add Content-Length field to POST command
revert the Content-Length search in fetch_from_buf_http() to previous code
fix segfault in memmove in fetch_from_buf_http()
raise maximum allowed headers/body size in directory.c
svn:r484
'buf_t' is now an opaque type defined in buffers.c .
Router descriptors now include all keys; routers generate keys as
needed on startup (in a newly defined "data directory"), and generate
their own descriptors. Descriptors are now self-signed.
Implementation is not complete: descriptors are never published; and
upon receiving a descriptor, the directory doesn't do anything with
it.
At least "routers.or" and orkeygen are now obsolete, BTW.
svn:r483
Fixed up the assert_*_ok funcs some (more work remains)
Changed config so it reads either /etc/torrc or the -f arg, never both
Finally tracked down a nasty bug with our use of tls:
It turns out that if you ask SSL_read() for no more than n bytes, it
will read the entire record from the network (and maybe part of the next
record, I'm not sure), give you n bytes of it, and keep the remaining
bytes internally. This is fine, except our poll-for-read looks at the
network, and there are no bytes pending on the network, so we never know
to ask SSL_read() for more bytes. Currently I've hacked it so if we ask
for n bytes and it returns n bytes, then it reads again right then. This
will interact poorly with our rate limiting; we need a cleaner solution.
svn:r481
deal with content-length headers better when reading http
don't assume struct socks4_info is a packed struct
fail the socks handshake if destip is zero
flesh out conn_state_to_string() for dir conn
fix typo (bug) in connection_handle_read()
directory get is now called fetch, post is now upload
reopen logs on sighup
svn:r475
this paves the way for supporting socks5 and other handshakes
it also removes those pesky AP-only variables from connection_t
also hacked a fix for a bug where some streams weren't ending properly --
maybe because marked connections weren't flushing properly?
svn:r472
