authorities should set. This will let future authorities choose
not to serve V2 directory information.
Also, go through and revamp all the authdir_mode stuff so it tries
to do the right thing if you're an auth but not a V1 or V2 auth.
svn:r10092
Make all LD_BUG log messsages get prefixed with "Bug: ". Remove manually-generated "Bug: "s from log-messages. (Apparently, we remembered to add them about 40% of the time.)
svn:r9733
As a trivial optimization, remove a redundant call to router_have_minimum_dir_info. This might shave 2% on some systems by according to some profilers.
svn:r9610
Removing the last DOCDOC comment hurt so much that I had to use Doxygen to identify undocumented macros and comments, and add 150 more DOCDOCs to point out where they were. Oops. Hey, kids! Fixing some of these could be your first Tor patch!
svn:r9477
directory tunnel without knowing a descriptor first. Still not
ready yet. As part of the change, now assume we can use a
create_fast cell if we don't know anything about a router.
svn:r9440
handshake to finish. Previously we would let them sit around for
days, if the connecting application didn't close them either.
Also take this opportunity to refactor a duplicate bit of circuituse.c.
And change the semantics of SocksTimeout slightly, but I think it'll
be ok.
svn:r9350
New socks command CONNECT_DIR. New config option TunnelDirConns that
builds a circ ending at the directory server and delivers a BEGIN_DIR
cell if it's running 0.1.2.2-alpha or later. We still need to make
one-hop circs when appropriate, while making other conns avoid them.
svn:r9098
Apply patch from Mike Perry: add more reasons for circuit destroys. (Slightly tweaked to avoid allocating a number for an "internal" reason.)
svn:r8739
Touch up last patch (to add REASON to CIRC events): make some reasons
more sensible, send reasons only to controllers that have enabled
extended events, and clean up whitespace.
svn:r8672
Make TrackExitHosts case-insensitive, and fix the behavior of .suffix TrackExitHosts items to avoid matching in the middle of an address. (Resolves an XXXX)
svn:r8579
Refactor entry guard status logic a lot; allow more factors [like not
having a Guard flag or being listed in ExcludeNodes] to render a guard
"unlisted" (now called "unusable"); track guard down status (now
called "unreachable") separately from is_running.
svn:r8519
Fix bug 314: Instead of checking address_in_virtualrange, check addressmap_have_mapping(). This should be more accurate. [Rename to addressmap_have_mapping() from addressmap_already_mapped().]
svn:r8226
Refactor connection_t into edge, or, dir, control, and base subtypes. This might save some RAM on busy exit servers, but really matters most in terms of correctness.
svn:r6906
circuit_t into origin_circuit_t and or_circuit_t. I fixed some
segaults; there may be more. We still need to move more rendezvous
stuff into subtypes.
This is a trial run for splitting up connection_t; if the approach is
insane, please say so soon so we can do something smarter.
Also, this discards the old HALF_OPEN code, which nobody seems to
want.
svn:r6817
wait unattached before we fail it?
Use this value for controller socks timeout, for normal socks
timeout, and for hidden-service socks timeout.
svn:r6217
1) Surround all constants by (parens), whether we'll be using them
in a denominator or not.
2) Express all time periods as products (24*60*60), not as multiplied-out
constants (86400).
3) Comments like "(60*60) /* one hour */" are as pointless as comments
like "c = a + b; /* set c to the sum of a and b */". Remove them.
4) All time periods should be #defined constants, not given inline.
5) All time periods should have doxygen comments.
6) All time periods, unless specified, are in seconds. It's not necessary
to say so.
To summarize, the old (lack of) style would allow:
#define FOO_RETRY_INTERVAL 60*60 /* one hour (seconds) */
next_try = now + 3600;
The new style is:
/** How often do we reattempt foo? */
#define FOO_RETRY_INTERVAL (60*60)
next_try = now + RETRY_INTERVAL;
svn:r6142
have a circuit in mind, and we timeout (30 seconds) because the
network never answers, we were expiring the circuit, but we weren't
obsoleting the connection or telling the helper functions. now do that.
svn:r5668
we screwed up the formatting in wild and unpredictable ways.
fix it before it becomes convention to format logs in wild and
unpredictable ways.
still need to do src/common/ someday.
svn:r5551
we were killing off rendezvous circuits unless they magically time-warped
to be too old before we got around to killing them, in which case we
would leave them alone. this made it hard to rendezvous with hidden
services.
svn:r5494
Weasel says circuit_get_by_conn is his main timesink. Most of its
users were just checking whether OR conns had circuits, so add a
circuit count to OR conns, and check that. One was
circuit_about_to_close_conn, which was doing an O(n^2) series of calls
to get all circs on an OR conn, so make an O(n) function for that.
Finally, circuit_get_by_edge_conn was using it as a sanity test that
has been around for a while but never found any actualy insanity, so
kill that.
circuit_get_by_conn is finally dead, which is good, since it was never
sane to begin with.
svn:r5460
separately. It's important to keep them separate because internal
circuits have their last hops picked like middle hops, rather than like
exit hops. So exiting on them will break the user's expectations.
- Stop cannibalizing internal circuits for general exits, and stop
cannibalizing exit circuits for rendezvous stuff.
- Don't let new exit streams attach to internal circuits.
- When deciding if we have enough circuits for internal and for exit,
don't count the wrong ones.
- Treat predicted resolves as predicted port 80 exits.
svn:r5457
don't tell you (it happens!); and rotate TLS connections once a week.
1) If an OR conn becomes more than a week old, make it obsolete.
2) If it's obsolete and empty, kill it.
3) When an OR makes a second connection to you, allow it.
4) If we want to send a new create cell, but the best conn we've
got is obsolete, and the router is 0.1.1.9-alpha-cvs or later, ask
for a new conn instead.
5) When we time out on circuit building on the first hop, make that
connection obsolete.
svn:r5429
warn when we'recalling a non-named server by its nickname;
don't warn twice about the same name.
Fix a bug in routers_update_status_from_networkstatus that made nearly
all clients never update routerinfo_t.is_named.
Try to list MyFamily elements by key, not by nickname.
Only warn about names that we generated ourself, or got from the local
user.
On TLS handshake, only check the other router's nickname against its
expected nickname if is_named is set.
svn:r5185
and there's a running Tor server at that address which allows exit to
the destination, then extend the circuit to that exit first.
Also, if the user asks for a .exit node, cannibalize general circs for it.
svn:r4779
CIRCUIT_PURPOSE_C_ESTABLISH_REND and CIRCUIT_PURPOSE_S_ESTABLISH_INTRO
so we were being forced to build those from scratch.
This should save us a bit of time. Also fixes bug 173.
svn:r4763
- Add a new extend_info_t datatype to hold information needed to
extend a circuit (addr,port,keyid,onion_key). Use it in cpath and
build_state. Make appropriate functions take or return it instead of
routerinfo_t or keyid.
- #if 0 needless check in circuit_get_by_edge_conn; if nobody triggers this
error in 0.1.0.10, nobody will trigger it.
- Implement new hidden service descriptor format, which contains "extend
info" for introduction points, along with protocol version list.
- Parse new format.
- Generate new format
- Cache old and new formats alongside each other.
- Directories serve "old" format if asked in old way, "newest available"
format if asked in new way.
- Use new format to find introduction points if possible; otherwise fall
back. Keep nickname lists and extendinfo lists in sync.
- Tests for new format.
- Implement new "v2" INTRODUCE cell format.
- Accept new format
- Use new format if we have a versioned service descriptor that says the
server accepts the new format.
- Add documentation for functions and data types.
svn:r4506
but we didn't like the result, we were closing the connection
without sending any destroys back for the pending circuits. now
send those destroys anyway; i hope this doesn't break too much.
svn:r3951
when building testing circs for orport testing, require high-bandwidth
nodes, so fewer circs fail. complain about unreachable orport separately
from unreachable dirport.
svn:r3935
Add 'testing' circuit purpose, for reachability testing.
Notice when our IP changes, and reset stats.
Try to pull down a directory via Tor to see if our DirPort is working.
Try to extend a circuit back to us to see if our ORPort is working.
Only publish a descriptor if they're both reachable.
These mostly work, and I'd better get them in before I cause conflicts.
svn:r3703
Add a new TrackHostExits directive to trigger addressmaps for
certain incoming socks addresses, for sites that break when your exit
keeps changing.
Redo the client-side dns cache so it's just an addressmap too.
svn:r3641
until none are left, then we try to refetch the descriptor. If it's
the same one we had before, then close streams right then. Whenever
a new stream arrives, even if it's right after, optimistically try
refetching the descriptor, just in case.
svn:r3379
a general circ, and called rend_client_rendcirc_has_opened(), which
called connection_ap_attach_pending(), which was needing a rendezvous
circ, so it cannibalized a general circuit, and called ...
svn:r3370
to the exit policy of the last hop. Intro and rendezvous circs must
be internal circs, to avoid leaking information. Resolve and connect
streams can use internal circs if they want.
New circuit pooling algorithm: make sure to have enough circs around
to satisfy any predicted ports, and also make sure to have 2 internal
circs around if we've required internal circs lately (with high uptime
if we've seen that lately).
Split NewCircuitPeriod config option into NewCircuitPeriod (30 secs),
which describes how often we retry making new circuits if current ones
are dirty, and MaxCircuitDirtiness (10 mins), which describes how long
we're willing to make use of an already-dirty circuit.
Once rendezvous circuits are established, keep using the same circuit as
long as you attach a new stream to it at least every 10 minutes. (So web
browsing doesn't require you to build new rend circs every 30 seconds.)
Cannibalize GENERAL circs to be C_REND, C_INTRO, S_INTRO, and S_REND
circ as necessary, if there are any completed ones lying around when
we try to launch one.
Re-instate the ifdef's to use version-0 style introduce cells, since
there was yet another bug in handling version-1 style. We'll try switching
over again after 0.0.9 is obsolete.
Bugfix: when choosing an exit node for a new non-internal circ, don't take
into account whether it'll be useful for any pending x.onion addresses --
it won't.
Bugfix: we weren't actually publishing the hidden service descriptor when
it became dirty. So we only published it every 20 minutes or so, which
means when you first start your Tor, the hidden service will seem broken.
svn:r3360
high capacity nodes. When building circuits, choose appropriate nodes.
New config option LongLivedPorts to indicate application streams
that will want high uptime circuits.
When attaching a stream to a circuit, pay attention to its requirements.
This means that every single node in an intro rend circuit, not just
the last one, will have a minimum uptime.
Boost the min uptime from an hour to 24 hours.
svn:r3339
tried they were all unreachable, assume we are not connected to
the network.
when an application request comes in during this state, be
optimistic and assume we just reconnected. fetch a new directory
and if it works, begin making circuits.
svn:r3327
make it clearer which warns are bugs,
make the control log event match its specification,
point out a bug in how we deal with failure when renewing the tls context.
svn:r3138
Stop treating the uint16_t's as null-terminated strings,
and stop looking at the byte after them to see if it's null,
because sometimes you're not allowed to look there.
svn:r3108
that will handle each such port. (We can extend this to include addresses
if exit policies shift to require that.) Seed us with port 80 so web
browsers won't complain that Tor is "slow to start up".
This was necessary because our old circuit building strategy just involved
counting circuits, and as time went by we would build up a big pile of
circuits that had peculiar exit policies (e.g. only exit to 9001-9100)
which would take up space in the circuit pile but never get used.
Fix router_compare_addr_to_addr_policy: it was not treating a port of *
as always matching, so we were picking reject *:* nodes as exit nodes too.
If you haven't used a clean circuit in an hour, throw it away, just to
be on the safe side.
This means after 6 hours a totally unused Tor client will have no
circuits open.
svn:r3078
Stop keeping track of num_retries for apconns, since they expire
after 60 seconds anyway.
When warning about retrying or giving up, print the address, so
the user knows which one it's talking about.
svn:r3073
waiting for its connected cell, we were calculating time from when the
ap_conn was created. So if it waited say 20 seconds before being attached,
then we would immediately decide that the circuit had timed out.
Also, make circuit_dump_by_conn() display actual circuit progress,
including circuits that haven't been attached to the conn yet but
hope to when it finishes connecting.
svn:r3072
