Right now, this has been done at a high level by confparse.c, but it
makes more sense to lower it.
This API is radically un-typesafe as it stands; we'll be wrapping it
in a safer API as we do #30914 and lower the struct manipulation
code as well.
Closes ticket 30864.
Note that the event base object is _not_ created from the initialize
function, since it is configuration-dependent. This will wait until
configuration is integrated into subsystems.
Closes ticket 30806.
Fixes assertion failure in tests on NetBSD:
slow/prob_distr/stochastic_log_logistic: [forking] May 25 03:56:58.091 [err] tor_assertion_failed_(): Bug: src/lib/crypt_ops/crypto_rand_fast.c:184: crypto_fast_rng_new_from_seed: Assertion inherit != INHERIT_RES_KEEP failed; aborting. (on Tor 0.4.1.1-alpha-dev 29955f13e5)
May 25 03:56:58.091 [err] Bug: Assertion inherit != INHERIT_RES_KEEP failed in crypto_fast_rng_new_from_seed at src/lib/crypt_ops/crypto_rand_fast.c:184: . (Stack trace not available) (on Tor 0.4.1.1-alpha-dev 29955f13e5)
[Lost connection!]
The ordinary definitions of timeradd() and timersub() contain a
branch. However, in coverage builds, this means that we get spurious
complaints about partially covered basic blocks, in a way that makes
our coverage determinism harder to check.
Ordinarily we skip calling log_fn(LOG_DEBUG,...) if debug logging is
completely disabled. However, in coverage builds, this means that
we get spurious complaints about partially covered basic blocks, in
a way that makes our coverage determinism harder to check.
I don't believe any of these represent a real timing vulnerability
(remote timing against memcmp() on a modern CPU is not easy), but
these are the ones where I believe we should be more careful.
For memeq and friends, "tor_" indicates constant-time and "fast_"
indicates optimized. I'm fine with leaving the constant-time
"safe_mem_is_zero" with its current name, but the "tor_" prefix on
the current optimized version is misleading.
Also, make the tor_digest*_is_zero() uniformly constant-time, and
add a fast_digest*_is_zero() version to use as needed.
A later commit in this branch will fix all the users of
tor_mem_is_zero().
Closes ticket 30309.
The two options are mutually exclusive, since otherwise an entry
like "Foo" would be ambiguous. We want to have the ability to treat
entries like this as keys, though, since some controller commands
interpret them as flags.
When releasing OpenSSL patch-level maintenance updates,
we do not want to rebuild binaries using it.
And since they guarantee ABI stability, we do not have to.
Without this patch, warning messages were produced
that confused users:
https://bugzilla.opensuse.org/show_bug.cgi?id=1129411
Fixes bug 30190; bugfix on 0.2.4.2-alpha commit 7607ad2bec
Signed-off-by: Bernhard M. Wiedemann <bwiedemann@suse.de>
The smartlist functions take great care to reset unused pointers inside
the smartlist memory to NULL.
The function smartlist_remove_keeporder does not clear memory in such
way when elements have been removed. Therefore call memset after the
for-loop that removes elements. If no element is removed, it is
effectively a no-op.
Signed-off-by: Tobias Stoeckmann <tobias@stoeckmann.org>
Previously, our use of abort() would break anywhere that we didn't
include stdlib.h. This was especially troublesome in case where
tor_assert_nonfatal() was used with ALL_BUGS_ARE_FATAL, since that
one seldom gets tested.
As an alternative, we could have just made this header include
stdlib.h. But that seems bloaty.
Fixes bug 30189; bugfix on 0.3.4.1-alpha.
In current NSS versions, these ciphersuites don't work with
SSL_ExportKeyingMaterial(), which was causing relays to fail when
they tried to negotiate the v3 link protocol authentication.
Fixes bug 29241; bugfix on 0.4.0.1-alpha.
And fix the documentation on the function: it does produce trailing
"="s as padding.
Also remove all checks for the return value, which were redundant anyway,
because the function never failed.
Part of 29660.
... and ed25519_public_to_base64(). Also remove all checks for the return
values, which were redundant anyway, because the functions never failed.
Part of 29960.
getpid() can be really expensive sometimes, and it can fail to
detect some kind of fork+prng mistakes, so we need to avoid it if
it's safe to do so.
This patch might slow down fast_prng a lot on any old operating
system that lacks a way to prevent ram from being inherited, AND
requires a syscall for any getpid() calls. But it should make sure
that we either crash or continue safely on incorrect fork+prng usage
elsewhere in the future.
This is just in case there is some rogue platform that uses a
nonstandard value for SEEK_*, and does not define that macro in
unistd.h. I think that's unlikely, but it's conceivable.
In 9c132a5f9e we replaced "buf" with a pointer and replaced
one instance of snprintf with asprintf -- but there was still one
snprintf left over, being crashy.
Fixes bug 29967; bug not in any released Tor. This is CID 1444262.
This can't actually result in a null pointer dereference, since
pub_excl and sub_excl are only set when the corresponding smartlists
are nonempty. But coverity isn't smart enough to figure that out,
and we shouldn't really be depending on it.
Bug 29938; CID 1444257. Bug not in any released Tor.
Having the numbers in those messages makes some of the unit test
unstable, by causing them to depend on the initialization order of
the naming objects.
Based on patches and review comments by Riastradh and Catalyst.
Co-authored-by: Taylor R Campbell <campbell+tor@mumble.net>
Co-authored-by: Taylor Yu <catalyst@torproject.org>
Previously, I had used integers encoded as pointers. This
introduced a flaw: NULL represented both the integer zero, and the
absence of a setting. This in turn made the checks in
cfg_msg_set_{type,chan}() not actually check for an altered value if
the previous value had been set to zero.
Also, I had previously kept a pointer to a dispatch_fypefns_t rather
than making a copy of it. This meant that if the dispatch_typefns_t
were changed between defining the typefns and creating the
dispatcher, we'd get the modified version.
Found while investigating coverage in pubsub_add_{pub,sub}_()
We want the DISPATCH_ADD_PUB() macro to count as making a
DECLARE_PUBLISH() invocation "used", so let's try a new approach
that preserves that idea. The old one apparently did not work for
some versions of osx clang.
This code tries to prevent a large number of possible errors by
enforcing different restrictions on the messages that different
modules publish and subscribe to.
Some of these rules are probably too strict, and some too lax: we
should feel free to change them as needed as we move forward and
learn more.
This "publish/subscribe" layer sits on top of lib/dispatch, and
tries to provide more type-safety and cross-checking for the
lower-level layer.
Even with this commit, we're still not done: more checking will come
in the next commit, and a set of usability/typesafety macros will
come after.
This module implements a way to send messages from one module to
another, with associated data types. It does not yet do anything to
ensure that messages are correct, that types match, or that other
forms of consistency are preserved.
We already do this in our log_debug() macro, but there are times
when we'd like to avoid allocating or precomputing something that we
are only going to log if debugging is on.
When NULL is given to lpApplicationName we enable Windows' "magical"
path interpretation logic, which makes Tor 0.4.x behave in the same way
as previous Tor versions did when it comes to executing binaries in
different system paths.
For more information about this have a look at the CreateProcessA()
documentation on MSDN -- especially the string interpretation example is
useful to understand this issue.
This bug was introduced in commit bfb94dd2ca.
See: https://bugs.torproject.org/29874
There's an incorrect comment in compat_time.c that suggests we call
FreeLibrary() before we're done using the library's functions.
See 29642 for background.
Closes ticket 29643.
* Move out code that depends on NSS to crypto_digest_nss.c
* Move out code that depends on OpenSSL to crypto_digest_openssl.c
* Keep the general code that is not specific to any of the above in
crypto_digest.c
This test was previously written to use the contents of the system
headers to decide whether INHERIT_NONE or INHERIT_ZERO was going to
work. But that won't work across different environments, such as
(for example) when the kernel doesn't match the headers. Instead,
we add a testing-only feature to the code to track which of these
options actually worked, and verify that it behaved as we expected.
Closes ticket 29541; bugfix not on any released version of Tor.
This module is currently implemented to use the same technique as
libottery (later used by the bsds' arc4random replacement), using
AES-CTR-256 as its underlying stream cipher. It's backtracking-
resistant immediately after each call, and prediction-resistant
after a while.
Here's how it works:
We generate psuedorandom bytes using AES-CTR-256. We generate BUFLEN bytes
at a time. When we do this, we keep the first SEED_LEN bytes as the key
and the IV for our next invocation of AES_CTR, and yield the remaining
BUFLEN - SEED_LEN bytes to the user as they invoke the PRNG. As we yield
bytes to the user, we clear them from the buffer.
Every RESEED_AFTER times we refill the buffer, we mix in an additional
SEED_LEN bytes from our strong PRNG into the seed.
If the user ever asks for a huge number of bytes at once, we pull SEED_LEN
bytes from the PRNG and use them with our stream cipher to fill the user's
request.
Using an anonymous mmap() is a good way to get pages that we can set
kernel-level flags on, like minherit() or madvise() or mlock().
We're going to use that so that we can make uninheritable locked
pages to store PRNG data.
The code checked for sysctl being available and HW_PHYSMEM being
defined, but HW_USERMEM was actually being used with sysctl instead
of HW_PHYSMEM.
The case for OpenBSD, etc. use HW_PHYSMEM64 (which is obviously a
64-bit variant of HW_PHYSMEM) and the case for OSX uses HW_MEMSIZE
(which appears to be a 64-bit variant of HW_PHYSMEM).
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
We log these messages at INFO level, except when we are reading a
private key from a file, in which case we log at WARN.
This fixes a regression from when we re-wrote our PEM code to be
generic between nss and openssl.
Fixes bug 29042, bugfix on 0.3.5.1-alpha.
When cleaning up after an error in process_unix_exec, the stdin
pipe was being double closed instead of closing both the stdin
and stdout pipes. This occurred in two places.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
NOTE: This commit breaks the build, because there was a mistake in an
earlier change of exactly the sort that this is meant to detect! I'm
leaving it broken for illustration.
Test exactly what the geometric sampler returns, because that's what
the downstream callers of it are going to use.
While here, also assert that the geometric sampler returns a positive
integer. (Our geometric distribution is the one suported on {1, 2,
3, ...} that returns the number of trials before the first success,
not the one supported on {0, 1, 2, ...} that returns the number of
failures before the first success.)
Prior to this commit, the testsuite was failing on OpenBSD. After
this commit the testsuite runs fine on OpenBSD.
It was previously decided to test for the OpenBSD macro (rather than
__OpenBSD__, etc.) because OpenBSD forks seem to have the former
macro defined. sys/param.h must be included for the OpenBSD macro
definition; however, many files tested for the OpenBSD macro without
having this header included.
This commit includes sys/param.h in the files where the OpenBSD macro
is used (and sys/param.h is not already included), and it also
changes some instances of the __OpenBSD__ macro to OpenBSD.
See commit 27df23abb6 which changed
everything to use OpenBSD instead of __OpenBSD__ or OPENBSD. See
also tickets #6982 and #20980 (the latter ticket is where it was
decided to use the OpenBSD macro).
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
In get_local_listener used by tor_ersatz_socketpair, the address
family used when binding the IPv6 socket was AF_INET instead of
AF_INET6.
Fixes bug 28995; bugfix on 0.3.5.1-alpha.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Reported on tor-dev by Gisle Vanem. Bug not in any released Tor
(The suggested patch used _MSC_VER, but that's not how we do stuff
with autoconf. With autoconf, you detect the feature you want,
rather than trying to list all the systems that do or do not have
it.)
This project introduces the prob_distr.c subsystem which implements all the
probability distributions that WTF-PAD needs. It also adds unittests for all of
them.
Code and tests courtesy of Riastradh.
Co-authored-by: Taylor R Campbell <campbell+tor@mumble.net>
Co-authored-by: Mike Perry <mikeperry-git@torproject.org>
We need this for padding negotiation so that we can have later machine
revisions supercede earlier ones.
Co-authored-by: George Kadianakis <desnacked@riseup.net>
This patch changes the CancelIoEx() example code to use CancelIo(),
which is available for older versions of Windows too. I still think the
kernel handles this nicely by sending broken pipes if either side
closes the pipe while I/O operations are pending.
See: https://bugs.torproject.org/28179
Handle `ERROR_BROKEN_PIPE` from ReadFileEx() and WriteFileEx() in
process_win32_stdin_write_done() and
process_win32_handle_read_completion() instead of in the early handler.
This most importantmly makes sure that `reached_eof` is set to true when
these errors appears.
See: https://bugs.torproject.org/28179
This patch adds some missing calls to set `reached_eof` of our handles
when various error conditions happens or when we close our handle (which
happens at `process_terminate()`.
See: https://bugs.torproject.org/28179
This patch adds some additional error checking after calls to
ReadFileEx() and WriteFileEx(). I have not managed to get this code to
reach the branch where `error_code` is NOT `ERROR_SUCCESS`, but MSDN
says one should check for this condition so we do so just to be safe.
See: https://bugs.torproject.org/28179
This patch makes us delay checking for whether we have an exit code
value (via GetExitCodeProcess()) until both stdout and stderr have been
closed by the operating system either by the process itself or by
process cleanup after termination.
See: https://bugs.torproject.org/28179
This patch makes sure that we terminate the event loop from the event
loop timer instead of directly in the process' exit handler. This allows
us to run the event loop an additional time to ensure that the SleepEx()
call on Windows is called and the data from stdout/stderr is delivered
to us.
Additionally we ensure that we don't try to read or write data from a
Unix process that have been terminated in the main loop, since its file
descriptors are closed at that time.
See: https://bugs.torproject.org/28179
This patch changes the API of the Windows backend of the Process
subsystem to allow the dormant interface to disable the Process event
timer.
See: https://bugs.torproject.org/28179
This patch changes our process_t's exit_callback to return a boolean
value. If the returned value is true, the process subsystem will call
process_free() on the given process_t.
See: https://bugs.torproject.org/28179
This patch moves the remaining code from subprocess.{h,c} to more
appropriate places in the process.c and process_win32.c module.
We also delete the now empty subprocess module files.
See: https://bugs.torproject.org/28179
This patch adds a new function that allows us to reset the environment
of a given process_t with a list of key/value pairs.
See: https://bugs.torproject.org/28179
This patch makes sure that we call process_notify_event_exit() after we
have done any modifications we need to do to the state of a process_t.
This allows application developers to call process_free() in the
exit_callback of the process.
See: https://bugs.torproject.org/28179
This patch adds support for getting the unique process identifier from a
given process_t. This patch implements both support for both the Unix
and Microsoft Windows backend.
See: https://bugs.torproject.org/28179
This patch adds support for Microsoft Windows in the Process subsystem.
Libevent does not support mixing different types of handles (sockets,
named pipes, etc.) on Windows in its core event loop code. This have
historically meant that Tor have avoided attaching any non-networking
handles to the event loop. This patch uses a slightly different approach
to roughly support the same features for the Process subsystem as we do
with the Unix backend.
In this patch we use Windows Extended I/O functions (ReadFileEx() and
WriteFileEx()) which executes asynchronously in the background and
executes a completion routine when the scheduled read or write operation
have completed. This is much different from the Unix backend where the
operating system signals to us whenever a file descriptor is "ready" to
either being read from or written to.
To make the Windows operating system execute the completion routines of
ReadFileEx() and WriteFileEx() we must get the Tor process into what
Microsoft calls an "alertable" state. To do this we execute SleepEx()
with a zero millisecond sleep time from a main loop timer that ticks
once a second. This moves the process into the "alertable" state and
when we return from the zero millisecond timeout all the outstanding I/O
completion routines will be called and we can schedule the next reads
and writes.
The timer loop is also responsible for detecting whether our child
processes have terminated since the last timer tick.
See: https://bugs.torproject.org/28179
This patch adds the Unix backend for the Process subsystem. The Unix
backend attaches file descriptors from the child process's standard in,
out and error to Tor's libevent based main loop using traditional Unix
pipes. We use the already available `waitpid` module to get events
whenever the child process terminates.
See: https://bugs.torproject.org/28179
This patch adds a new Process subsystem for running external programs in
the background of Tor. The design is focused around a new type named
`process_t` which have an API that allows the developer to easily write
code that interacts with the given child process. These interactions
includes:
- Easy API for writing output to the child process's standard input
handle.
- Receive callbacks whenever the child has output on either its standard
output or standard error handles.
- Receive callback when the child process terminates.
We also support two different "protocols" for handling output from the
child process. The default protocol is the "line" protocol where the
process output callbacks will be invoked only when there is complete
lines (either "\r\n" or "\n" terminated). We also support the "raw"
protocol where the read callbacks will get whatever the operating system
delivered to us in a single read operation.
This patch does not include any operating system backends, but the Unix
and Windows backends will be included in separate commits.
See: https://bugs.torproject.org/28179
The point of this function is to make sure that the ed25519-based
implementation of curve25519_basepoint() actually works when we
start tor, and use the regular fallback implementation if it
doesn't. But it accounts for 9% of our startup time in the case
when we have directory information, and I think it's safe to make
the test shorter. After all, it has yet to find any actual bugs in
curved25519_scalarmult_basepoint_donna() on any platforms.
Closes ticket 28838.
