Remove a series of connection counters that were only used when dumping the
rephist statistics with SIGUSR1 signal.
This reduces the or_history_t structure size.
Closes#25163
Signed-off-by: David Goulet <dgoulet@torproject.org>
This removes the code that tracks the extend attemps a client makes. We don't
use it and it was only used to provide statistics on a SIGUSR1 from the
rephist dump stats function.
Part of #25163
Signed-off-by: David Goulet <dgoulet@torproject.org>
These statistics were largely ununsed, and kept track of statistical information
on things like how many time we had done TLS or how many signatures we had
verified. This information is largely not useful, and would only be logged
after receiving a SIGUSR1 signal (but only if the logging severity level was
less than LOG_INFO).
* FIXES#19871.
* REMOVES note_crypto_pk_op(), dump_pk_op(), and pk_op_counts from
src/or/rephist.c.
* REMOVES every external call to these functions.
This unifies CircuitIdleTimeout and PredictedCircsRelevanceTime into a single
option, and randomizes it.
It also gives us control over the default value as well as relay-to-relay
connection lifespan through the consensus.
Conflicts:
src/or/circuituse.c
src/or/config.c
src/or/main.c
src/test/testing_common.c
This defense will cause Cisco, Juniper, Fortinet, and other routers operating
in the default configuration to collapse netflow records that would normally
be split due to the 15 second flow idle timeout.
Collapsing these records should greatly reduce the utility of default netflow
data for correlation attacks, since all client-side records should become 30
minute chunks of total bytes sent/received, rather than creating multiple
separate records for every webpage load/ssh command interaction/XMPP chat/whatever
else happens to be inactive for more than 15 seconds.
The defense adds consensus parameters to govern the range of timeout values
for sending padding packets, as well as for keeping connections open.
The defense only sends padding when connections are otherwise inactive, and it
does not pad connections used solely for directory traffic at all. By default
it also doesn't pad inter-relay connections.
Statistics on the total padding in the last 24 hours are exported to the
extra-info descriptors.
This is a big-ish patch, but it's very straightforward. Under this
clang warning, we're not actually allowed to have a global variable
without a previous extern declaration for it. The cases where we
violated this rule fall into three roughly equal groups:
* Stuff that should have been static.
* Stuff that was global but where the extern was local to some
other C file.
* Stuff that was only global when built for the unit tests, that
needed a conditional extern in the headers.
The first two were IMO genuine problems; the last is a wart of how
we build tests.
The two statistics are:
1. number of RELAY cells observed on successfully established
rendezvous circuits; and
2. number of .onion addresses observed as hidden-service
directory.
Both statistics are accumulated over 24 hours, obfuscated by rounding
up to the next multiple of a given number and adding random noise,
and written to local file stats/hidserv-stats.
Notably, no statistics will be gathered on clients or services, but
only on relays.
In C, we technically aren't supposed to define our own things that
start with an underscore.
This is a purely machine-generated commit. First, I ran this script
on all the headers in src/{common,or,test,tools/*}/*.h :
==============================
use strict;
my %macros = ();
my %skipped = ();
FILE: for my $fn (@ARGV) {
my $f = $fn;
if ($fn !~ /^\.\//) {
$f = "./$fn";
}
$skipped{$fn} = 0;
open(F, $fn);
while (<F>) {
if (/^#ifndef ([A-Za-z0-9_]+)/) {
$macros{$fn} = $1;
next FILE;
}
}
}
print "#!/usr/bin/perl -w -i -p\n\n";
for my $fn (@ARGV) {
if (! exists $macros{$fn}) {
print "# No macro known for $fn!\n" if (!$skipped{$fn});
next;
}
if ($macros{$fn} !~ /_H_?$/) {
print "# Weird macro for $fn...\n";
}
my $goodmacro = uc $fn;
$goodmacro =~ s#.*/##;
$goodmacro =~ s#[\/\-\.]#_#g;
print "s/(?<![A-Za-z0-9_])$macros{$fn}(?![A-Za-z0-9_])/TOR_${goodmacro}/g;\n"
}
==============================
It produced the following output, which I then re-ran on those same files:
==============================
s/(?<![A-Za-z0-9_])_TOR_ADDRESS_H(?![A-Za-z0-9_])/TOR_ADDRESS_H/g;
s/(?<![A-Za-z0-9_])_TOR_AES_H(?![A-Za-z0-9_])/TOR_AES_H/g;
s/(?<![A-Za-z0-9_])_TOR_COMPAT_H(?![A-Za-z0-9_])/TOR_COMPAT_H/g;
s/(?<![A-Za-z0-9_])_TOR_COMPAT_LIBEVENT_H(?![A-Za-z0-9_])/TOR_COMPAT_LIBEVENT_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONTAINER_H(?![A-Za-z0-9_])/TOR_CONTAINER_H/g;
s/(?<![A-Za-z0-9_])_TOR_CRYPTO_H(?![A-Za-z0-9_])/TOR_CRYPTO_H/g;
s/(?<![A-Za-z0-9_])TOR_DI_OPS_H(?![A-Za-z0-9_])/TOR_DI_OPS_H/g;
s/(?<![A-Za-z0-9_])_TOR_MEMAREA_H(?![A-Za-z0-9_])/TOR_MEMAREA_H/g;
s/(?<![A-Za-z0-9_])_TOR_MEMPOOL_H(?![A-Za-z0-9_])/TOR_MEMPOOL_H/g;
s/(?<![A-Za-z0-9_])TOR_PROCMON_H(?![A-Za-z0-9_])/TOR_PROCMON_H/g;
s/(?<![A-Za-z0-9_])_TOR_TORGZIP_H(?![A-Za-z0-9_])/TOR_TORGZIP_H/g;
s/(?<![A-Za-z0-9_])_TOR_TORINT_H(?![A-Za-z0-9_])/TOR_TORINT_H/g;
s/(?<![A-Za-z0-9_])_TOR_LOG_H(?![A-Za-z0-9_])/TOR_TORLOG_H/g;
s/(?<![A-Za-z0-9_])_TOR_TORTLS_H(?![A-Za-z0-9_])/TOR_TORTLS_H/g;
s/(?<![A-Za-z0-9_])_TOR_UTIL_H(?![A-Za-z0-9_])/TOR_UTIL_H/g;
s/(?<![A-Za-z0-9_])_TOR_BUFFERS_H(?![A-Za-z0-9_])/TOR_BUFFERS_H/g;
s/(?<![A-Za-z0-9_])_TOR_CHANNEL_H(?![A-Za-z0-9_])/TOR_CHANNEL_H/g;
s/(?<![A-Za-z0-9_])_TOR_CHANNEL_TLS_H(?![A-Za-z0-9_])/TOR_CHANNELTLS_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITBUILD_H(?![A-Za-z0-9_])/TOR_CIRCUITBUILD_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITLIST_H(?![A-Za-z0-9_])/TOR_CIRCUITLIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITMUX_EWMA_H(?![A-Za-z0-9_])/TOR_CIRCUITMUX_EWMA_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITMUX_H(?![A-Za-z0-9_])/TOR_CIRCUITMUX_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITUSE_H(?![A-Za-z0-9_])/TOR_CIRCUITUSE_H/g;
s/(?<![A-Za-z0-9_])_TOR_COMMAND_H(?![A-Za-z0-9_])/TOR_COMMAND_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONFIG_H(?![A-Za-z0-9_])/TOR_CONFIG_H/g;
s/(?<![A-Za-z0-9_])TOR_CONFPARSE_H(?![A-Za-z0-9_])/TOR_CONFPARSE_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONNECTION_EDGE_H(?![A-Za-z0-9_])/TOR_CONNECTION_EDGE_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONNECTION_H(?![A-Za-z0-9_])/TOR_CONNECTION_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONNECTION_OR_H(?![A-Za-z0-9_])/TOR_CONNECTION_OR_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONTROL_H(?![A-Za-z0-9_])/TOR_CONTROL_H/g;
s/(?<![A-Za-z0-9_])_TOR_CPUWORKER_H(?![A-Za-z0-9_])/TOR_CPUWORKER_H/g;
s/(?<![A-Za-z0-9_])_TOR_DIRECTORY_H(?![A-Za-z0-9_])/TOR_DIRECTORY_H/g;
s/(?<![A-Za-z0-9_])_TOR_DIRSERV_H(?![A-Za-z0-9_])/TOR_DIRSERV_H/g;
s/(?<![A-Za-z0-9_])_TOR_DIRVOTE_H(?![A-Za-z0-9_])/TOR_DIRVOTE_H/g;
s/(?<![A-Za-z0-9_])_TOR_DNS_H(?![A-Za-z0-9_])/TOR_DNS_H/g;
s/(?<![A-Za-z0-9_])_TOR_DNSSERV_H(?![A-Za-z0-9_])/TOR_DNSSERV_H/g;
s/(?<![A-Za-z0-9_])TOR_EVENTDNS_TOR_H(?![A-Za-z0-9_])/TOR_EVENTDNS_TOR_H/g;
s/(?<![A-Za-z0-9_])_TOR_GEOIP_H(?![A-Za-z0-9_])/TOR_GEOIP_H/g;
s/(?<![A-Za-z0-9_])_TOR_HIBERNATE_H(?![A-Za-z0-9_])/TOR_HIBERNATE_H/g;
s/(?<![A-Za-z0-9_])_TOR_MAIN_H(?![A-Za-z0-9_])/TOR_MAIN_H/g;
s/(?<![A-Za-z0-9_])_TOR_MICRODESC_H(?![A-Za-z0-9_])/TOR_MICRODESC_H/g;
s/(?<![A-Za-z0-9_])_TOR_NETWORKSTATUS_H(?![A-Za-z0-9_])/TOR_NETWORKSTATUS_H/g;
s/(?<![A-Za-z0-9_])_TOR_NODELIST_H(?![A-Za-z0-9_])/TOR_NODELIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_NTMAIN_H(?![A-Za-z0-9_])/TOR_NTMAIN_H/g;
s/(?<![A-Za-z0-9_])_TOR_ONION_H(?![A-Za-z0-9_])/TOR_ONION_H/g;
s/(?<![A-Za-z0-9_])_TOR_OR_H(?![A-Za-z0-9_])/TOR_OR_H/g;
s/(?<![A-Za-z0-9_])_TOR_POLICIES_H(?![A-Za-z0-9_])/TOR_POLICIES_H/g;
s/(?<![A-Za-z0-9_])_TOR_REASONS_H(?![A-Za-z0-9_])/TOR_REASONS_H/g;
s/(?<![A-Za-z0-9_])_TOR_RELAY_H(?![A-Za-z0-9_])/TOR_RELAY_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDCLIENT_H(?![A-Za-z0-9_])/TOR_RENDCLIENT_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDCOMMON_H(?![A-Za-z0-9_])/TOR_RENDCOMMON_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDMID_H(?![A-Za-z0-9_])/TOR_RENDMID_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDSERVICE_H(?![A-Za-z0-9_])/TOR_RENDSERVICE_H/g;
s/(?<![A-Za-z0-9_])_TOR_REPHIST_H(?![A-Za-z0-9_])/TOR_REPHIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_REPLAYCACHE_H(?![A-Za-z0-9_])/TOR_REPLAYCACHE_H/g;
s/(?<![A-Za-z0-9_])_TOR_ROUTER_H(?![A-Za-z0-9_])/TOR_ROUTER_H/g;
s/(?<![A-Za-z0-9_])_TOR_ROUTERLIST_H(?![A-Za-z0-9_])/TOR_ROUTERLIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_ROUTERPARSE_H(?![A-Za-z0-9_])/TOR_ROUTERPARSE_H/g;
s/(?<![A-Za-z0-9_])TOR_ROUTERSET_H(?![A-Za-z0-9_])/TOR_ROUTERSET_H/g;
s/(?<![A-Za-z0-9_])TOR_STATEFILE_H(?![A-Za-z0-9_])/TOR_STATEFILE_H/g;
s/(?<![A-Za-z0-9_])_TOR_STATUS_H(?![A-Za-z0-9_])/TOR_STATUS_H/g;
s/(?<![A-Za-z0-9_])TOR_TRANSPORTS_H(?![A-Za-z0-9_])/TOR_TRANSPORTS_H/g;
s/(?<![A-Za-z0-9_])_TOR_TEST_H(?![A-Za-z0-9_])/TOR_TEST_H/g;
s/(?<![A-Za-z0-9_])_TOR_FW_HELPER_H(?![A-Za-z0-9_])/TOR_TOR_FW_HELPER_H/g;
s/(?<![A-Za-z0-9_])_TOR_FW_HELPER_NATPMP_H(?![A-Za-z0-9_])/TOR_TOR_FW_HELPER_NATPMP_H/g;
s/(?<![A-Za-z0-9_])_TOR_FW_HELPER_UPNP_H(?![A-Za-z0-9_])/TOR_TOR_FW_HELPER_UPNP_H/g;
==============================
MSVC warns if you declare a function as having a "int foo" argument
and then implement it with a "const int foo" argument, even though
the latter "const" is not a part of the function's interface.
This is used for the bridge authority currently, to get a better
intuition on how many descriptors are actually fetched from it and how
many fetches happen in total.
Implements ticket 4200.
Now that formatting the buffer-stats string is separate from writing
it to disk, we can also decouple the logic to extract stats from
circuits and finally write some unit tests for the history code.
The new rep_hist_format_buffer_stats() generates a buffer-stats string
that rep_hist_buffer_stats_write() writes to disk. All the state
changing (e.g., resetting the buffer-stats history and initializing
the next measurement interval) takes place in
rep_hist_buffer_stats_write(). That allows us to finally test the
buffer-stats code better.
It is important to verify the uptime claim of a relay instead of just
trusting it, otherwise it becomes too easy to blackhole a specific
hidden service. rephist already has data available that we can use here.
Bugfix on 0.2.0.10-alpha.
rransom noticed that a change of ORPort is just as bad as a change of IP
address from a client's perspective, because both mean that the relay is
not available to them while the new information hasn't propagated.
Change the bug1035 fix accordingly.
Also make sure we don't log a bridge's IP address (which might happen
when we are the bridge authority).
Our checks that we don't exceed the 50 KB size limit of extra-info
descriptors apparently failed. This patch fixes these checks and reserves
another 250 bytes for appending the signature. Fixes bug 2183.
With this patch we stop scheduling when we should write statistics using a
single timestamp in run_scheduled_events(). Instead, we remember when a
statistics interval starts separately for each statistic type in geoip.c
and rephist.c. Every time run_scheduled_events() tries to write stats to
disk, it learns when it should schedule the next such attempt.
This patch also enables all statistics to be stopped and restarted at a
later time.
This patch comes with a few refactorings, some of which were not easily
doable without the patch.
