This patch removes the `tor_fgets()` wrapper around `fgets(3)` since it
is no longer needed. The function was created due to inconsistency
between the returned values of `fgets(3)` on different versions of Unix
when using `fgets(3)` on non-blocking file descriptors, but with the
recent changes in bug #21654 we switch from unbuffered to direct I/O on
non-blocking file descriptors in our utility module.
We continue to use `fgets(3)` directly in the geoip and dirserv module
since this usage is considered safe.
This patch also removes the test-case that was created to detect
differences in the implementation of `fgets(3)` as well as the changes
file since these changes was not included in any releases yet.
See: https://bugs.torproject.org/21654
This patch changes a number of read loops in the util module to use
less-than comparison instead of not-equal-to comparison. We do this in
the case that we have a bug elsewhere that might cause `numread` to
become larger than `count` and thus become an infinite loop.
This patch removes the buffered I/O stream usage in process_handle_t and
its related utility functions. This simplifies the code and avoids racy
code where we used buffered I/O on non-blocking file descriptors.
See: https://bugs.torproject.org/21654
This patch modifies `tor_read_all_handle()` to use read(2) instead of
fgets(3) when reading the stdout from the child process. This should
eliminate the race condition that can be triggered in the 'slow/util/*'
tests on slower machines running OpenBSD, FreeBSD and HardenedBSD.
See: https://bugs.torproject.org/21654
Make hidden services with 8 to 10 introduction points check for failed
circuits immediately after startup. Previously, they would wait for 5
minutes before performing their first checks.
Fixes bug 21594; bugfix on commit 190aac0eab in Tor 0.2.3.9-alpha.
Reported by alecmuffett.
Previously, they would stop checking when they exceeded their intro point
creation limit.
Fixes bug 21596; bugfix on commit d67bf8b2f2 in Tor 0.2.7.2-alpha.
Reported by alecmuffett.
Previously, they would stop checking when they exceeded their intro point
creation limit.
Fixes bug 21596; bugfix on commit d67bf8b2f2 in Tor 0.2.7.2-alpha.
Reported by alecmuffett.
This patch resets `buf` in test_util_fgets_eagain() after each succesful
ivocation to avoid stray artifacts left in the buffer by erroneous
tor_fgets() calls.
This patch adds the `tor_fgets()` function to our compatibility layer.
`tor_fgets()` adds an additional check for whether the error-bit have
been enabled for the given file stream, if that is the case and `errno`
is set to `EAGAIN` we make sure that we always return NULL.
Unfortunately `fgets(3)` behaves differently on different versions of
the C library.
See: https://bugs.torproject.org/21416
See: https://bugs.torproject.org/20988
In that chutney test, the bridge client is configured to connect to
the same bridge at 127.0.0.1:5003 _and_ at [::1]:5003, with no
change in transports.
That meant, I think, that the descriptor is only assigned to the
first bridge when it arrives, and never the second.
- Make sure we check at least two guards for descriptor before making
circuits. We typically use the first primary guard for circuits, but
it can also happen that we use the second primary guard (e.g. if we
pick our first primary guard as an exit), so we should make sure we
have descriptors for both of them.
- Remove BUG() from the guard_has_descriptor() check since we now know
that this can happen in rare but legitimate situations as well, and we
should just move to the next guard in that case.
(But use bash if it's available.)
This is a workaround until we remove bash-specific code in 19699.
Fixes bug 21581; bugfix on 21562, not in any released version of tor.
Previously I'd made a bad assumption in the implementation of
prop271 in 0.3.0.1-alpha: I'd assumed that there couldn't be two
guards with the same identity. That's true for non-bridges, but in
the bridge case, we allow two bridges to have the same ID if they
have different addr:port combinations -- in order to have the same
bridge ID running multiple PTs.
Fortunately, this assumption wasn't deeply ingrained: we stop
enforcing the "one guard per ID" rule in the bridge case, and
instead enforce "one guard per <id,addr,port>".
We also needed to tweak our implementation of
get_bridge_info_for_guard, since it made the same incorrect
assumption.
Fixes bug 21027; bugfix on 0.3.0.1-alpha.
This feature makes it possible to turn off memory sentinels (like
those used for safety in buffers.c and memarea.c) when fuzzing, so
that we can catch bugs that they would otherwise prevent.
Since 0.2.4.11-alpha (in 0196647970) we've tried to randomize
the start time to up to some time in the past. But unfortunately we
allowed the start time to be in the future as well, which isn't
really legit.
The new behavior lets the start time be be up to
MAX(cert_lifetime-2days, 0) in the past, but never in the future.
Fixes bug 21420; bugfix on 0.2.4.11-alpha.
Teor thinks that this connection_dirserv_add_dir_bytes_to_outbuf()
might be the problem, if the "remaining" calculation underflows. So
I'm adding a couple of checks there, and improving the casts.
When encoding a legacy ESTABLISH_INTRO cell, we were using the sizeof() on a
pointer instead of using the real size of the destination buffer leading to an
overflow passing an enormous value to the signing digest function.
Fortunately, that value was only used to make sure the destination buffer
length was big enough for the key size and in this case it always was because
of the overflow.
Fixes#21553
Signed-off-by: David Goulet <dgoulet@torproject.org>
strto* and _atoi64 accept +, -, and various whitespace before numeric
characters. And permitted whitespace is different between POSIX and Windows.
Fixes bug 21507 and part of 21508; bugfix on 0.0.8pre1.
This patch makes us store the number of sent and received RELAY_DATA
cells used for directory connections. We log the numbers after we have
received an EOF in connection_dir_client_reached_eof() from the
directory server.
Instead of returning 404 error code, this led to a NULL pointer being used and
thus a crash of tor.
Fixes#21471
Signed-off-by: David Goulet <dgoulet@torproject.org>
Fixes bug 20894; bugfix on 0.2.0.16-alpha.
We already applied a workaround for this as 20834, so no need to
freak out (unless you didn't apply 20384 yet).
This should be "impossible" without making a SHA1 collision, but
let's not keep the assumption that SHA1 collisions are super-hard.
This prevents another case related to 21278. There should be no
behavioral change unless -ftrapv is on.
I think this one probably can't underflow, since the input ranges
are small. But let's not tempt fate.
This patch also replaces the "cmp" functions here with just "eq"
functions, since nothing actually checked for anything besides 0 and
nonzero.
Related to 21278.
Fix for TROVE-2017-001 and bug 21278.
(Note: Instead of handling signed ints "correctly", we keep the old
behavior, except for the part where we would crash with -ftrapv.)
This is a purely cosmetic patch that changes RELAY_BEGINDIR in various
comments to RELAY_BEGIN_DIR, which should make it easier to grep for the
symbols.
According to 21116, it seems to be needed for Wheezy Raspbian build. Also,
manpage of socket(2) does confirm that this errno value should be catched as
well in case of no support from the OS of IPv4 or/and IPv6.
Fixes#21116
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch ensures that we log the size of the inbuf when a directory
client have reached EOF on the connection.
See: https://bugs.torproject.org/21206
This patch makes the log-statements in `connection_dir_client_reached_eof`
more explicit by writing "body size" instead of just "size" which could
be confused as being the size of the entire response, which would
include HTTP status-line and headers.
See: https://bugs.torproject.org/21206
This reverts commit 5446cb8d3d.
The underlying revert was done in 0.2.6, since we aren't backporting
seccomp2 loosening fixes to 0.2.6. But the fix (for 17354) already
went out in 0.2.7.4-rc, so we shouldn't revert it in 0.2.7.
This patch adds a debug log statement when sending a request to a
directory server. The information logged includes: the payload size (if
available), the total size of the request, the address and port of the
directory server, and the purpose of the directory connection.
See: https://bugs.torproject.org/21206
maint-0.2.7-redux is an attempt to try to re-create a plausible
maint-0.2.7 branch. I've started from the tor-0.2.7.6, and then I
merged maint-0.2.6 into the branch.
This has produced 2 conflicts: one related to the
rendcommon->rendcache move, and one to the authority refactoring.
If a hostname is supplied to tor-resolve which is too long, it will be
silently truncated, resulting in a different hostname lookup:
$ tor-resolve $(python -c 'print("google.com" + "m" * 256)')
If tor-resolve uses SOCKS5, the length is stored in an unsigned char,
which overflows in this case and leads to the hostname "google.com".
As this one is a valid hostname, it returns an address instead of giving
an error due to the invalid supplied hostname.
Check size argument to memwipe() for underflow.
Closes bug #18089. Reported by "gk", patch by "teor".
Bugfix on 0.2.3.25 and 0.2.4.6-alpha (#7352),
commit 49dd5ef3 on 7 Nov 2012.
The length of auth_data from an INTRODUCE2 cell is checked when the
auth_type is recognized (1 or 2), but not for any other non-zero
auth_type. Later, auth_data is assumed to have at least
REND_DESC_COOKIE_LEN bytes, leading to a client-triggered out of bounds
read.
Fixed by checking auth_len before comparing the descriptor cookie
against known clients.
Fixes#15823; bugfix on 0.2.1.6-alpha.
Bug 21242 occurred because we asserted that extend_info_from_node()
had succeeded...even though we already had the code to handle such a
failure. We fixed that in 93b39c5162.
But there were four other cases in our code where we called
extend_info_from_node() and either tor_assert()ed that it returned
non-NULL, or [in one case] silently assumed that it returned
non-NULL. That's not such a great idea. This patch makes those
cases check for a bug of this kind instead.
Fixes bug 21372; bugfix on 0.2.3.1-alpha when
extend_info_from_node() was introduced.
Once a second, we go over all services and consider the validity of the intro
points. Now, also try to remove expiring nodes that have no more circuit
associated to them. This is possible if we moved an intro point object
previously to that list and the circuit actually timed out or was closed by
the introduction point itself.
Signed-off-by: David Goulet <dgoulet@torproject.org>
In rend_service_intro_has_opened(), this is subject to a possible underflow
because of how the if() casts the results. In the case where the expiring
nodes list length is bigger than the number of IP circuits, we end up in the
following situation where the result will be cast to an unsigned int. For
instance, "5 - 6" is actually a BIG number.
Ultimately leading to closing IP circuits in a non stop loop.
Partially fixes#21302.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previously the dirserv_orconn_tls_done() function would skip routers
when they advertised an ed25519 key but didn't present it during the
link handshake. But that covers all versions between 0.2.7.2-alpha
and 0.2.9.x inclusive!
Fixes bug 21107; bugfix on 0.3.0.1-alpha.
Because we don't allow client functionalities in non anonymous mode,
recommending Tor2web is a bad idea.
If a user wants to use Tor2web as a client (losing all anonymity), it should
run a second tor, not use it with a single onion service tor.
Fixes#21294.
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch adds checks for expected log messages for failure cases of
different ill-formed ESTABLISH_INTRO cell's.
See: https://bugs.torproject.org/21266
In rend_consider_services_intro_points(), we had a possible interger underflow
which could lead to creating a very large number of intro points. We had a
safe guard against that *except* if the expiring_nodes list was not empty
which is realistic thing.
This commit removes the check on the expiring nodes length being zero. It's
not because we have an empty list of expiring nodes that we don't want to open
new IPs. Prior to this check, we remove invalid IP nodes from the main list of
a service so it should be the only thing to look at when deciding if we need
to create new IP(s) or not.
Partially fixes#21302.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Determining if OpenSSL structures are opaque now uses an autoconf check
instead of comparing the version number. Some definitions have been
moved to their own check as assumptions which were true for OpenSSL
with opaque structures did not hold for LibreSSL. Closes ticket 21359.
This disregards anything smaller than an IPv6 /64, and rejects ports that
are rejected on an IPv6 /16 or larger.
Adjust existing unit tests, and add more to cover exceptional cases.
No IPv4 behaviour changes.
Fixes bug 21357
This interim fix results in too many IPv6 rejections.
No behaviour change for IPv4 counts, except for overflow fixes that
would require 4 billion redundant 0.0.0.0/0 policy entries to trigger.
Part of 21357
Stop modifying the value of our torrc option HiddenServiceStatistics just
because we're not a bridge or relay. This bug was causing Tor Browser users to
write "HiddenServiceStatistics 0" in their torrc files as if they had chosen
to change the config.
Fixes#21150
Signed-off-by: David Goulet <dgoulet@torproject.org>
Since we can call this function more than once before we update all
the confirmed_idx fields, we can't rely on all the relays having an
accurate confirmed_idx.
Fixes bug 21129; bugfix on 0.3.0.1-alpha
We need to call it before nt_service_parse_options(), since
nt_service_parse_options() can call back into nt_service_main(),
which calls do_main_loop().
Fixes bug 21356; bugfix on 0.2.9.1-alpha.
In addition to not wanting to build circuits until we can see most
of the paths in the network, and in addition to not wanting to build
circuits until we have a consensus ... we shouldn't build circuits
till all of our (in-use) primary guards have descriptors that we can
use for them.
This is another bug 21242 fix.
Actually, it's _fine_ to use a descriptorless guard for fetching
directory info -- we just shouldn't use it when building circuits.
Fortunately, we already have a "usage" flag that we can use here.
Partial fix for bug 21242.
This relates to the 21242 fix -- entry_guard_pick_for_circuit()
should never yield nodes without descriptors when the node is going
to be used for traffic, since we won't be able to extend through
them.
This assertion triggered in the (error) case where we got a result
from guards_choose_guard() without a descriptor. That's not
supposed to be possible, but it's not worth crashing over.
I broke "GETCONF *Port" in 20956, when I made SocksPort a
subordinate option of the virtual option SocksPortLines, so that I
could make SocksPort and __SocksPort provide qthe same
functionality. The problem was that you can't pass a subordinate
option to GETCONF.
So, this patch fixes that by letting you fetch subordinate options.
It won't always be meaningful to consider these options
out-of-context, but that can be the controller-user's
responsibility to check.
Closes ticket 21300.
If there are no ephemeral or detached onion services, then
"GETINFO onions/current" or "GETINFO onions/detached" should
return an empty list instead of an error
If tor_mmap_file is called with a file which is larger than SIZE_MAX,
only a small part of the file will be memory-mapped due to integer
truncation.
This can only realistically happen on 32 bit architectures with large
file support.
If a hostname is supplied to tor-resolve which is too long, it will be
silently truncated, resulting in a different hostname lookup:
$ tor-resolve $(python -c 'print("google.com" + "m" * 256)')
If tor-resolve uses SOCKS5, the length is stored in an unsigned char,
which overflows in this case and leads to the hostname "google.com".
As this one is a valid hostname, it returns an address instead of giving
an error due to the invalid supplied hostname.
When marking for close a circuit, the reason value, a integer, was assigned to
a uint16_t converting any negative reasons (internal) to the wrong value. On
the HS side, this was causing the client to flag introduction points to be
unreachable as the internal reason was wrongfully converted to a positive
16bit value leading to flag 2 out of 3 intro points to be unreachable.
Fixes#20307 and partially fixes#21056
Signed-off-by: David Goulet <dgoulet@torproject.org>
- Also remove LCOV marks from blocks of code that can be reachable by tests
if we mock relay_send_command_from_edge().
Signed-off-by: David Goulet <dgoulet@torproject.org>
With the previous commit, we validate the circuit _before_ calling
rend_mid_introduce() which handles the INTRODUCE1 payload.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Adds a better semantic and it also follows the same interface for the
INTRODUCE1 API which is circuit_is_suitable_for_introduce1().
Signed-off-by: David Goulet <dgoulet@torproject.org>
That way, when we are parsing the options and LearnCircuitBuildTimeout is set
to 0, we don't assert trying to get the options list with get_options().
Fixes#21062
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch refactors duplicated code, to check if a given router
supports fetching the extra-info document, into a common macro called
SKIP_MISSING_TRUSTED_EXTRAINFO.
This patch generalizes the two functions
router_is_already_dir_fetching_rs and router_is_already_dir_fetching_ds
into a single function, router_is_already_dir_fetching_, by lifting the
passing of the IPv4 & IPv6 addresses and the directory port number to
the caller.
So far, the TTLs for both A and AAAA records were not initialised,
resulting in exit relays sending back the value 60 to Tor clients. This
also impacts exit relays' DNS cache -- the expiry time for all domains
is set to 60.
This fixes <https://bugs.torproject.org/19025>.
The server-side clipping now clamps to one of two values, both
for what to report, and how long to cache.
Additionally, we move some defines to dns.h, and give them better
names.
An operator couldn't set the number of introduction point below the default
value which is 3. With this commit, from 0 to the hardcoded maximum is now
allowed.
Closes#21033
Signed-off-by: David Goulet <dgoulet@torproject.org>
Our config code is checking correctly at DataDirectoryGroupReadable but then
when we initialize the keys, we ignored that option ending up at setting back
the DataDirectory to 0700 instead of 0750. Patch by "redfish".
Fixes#19953
Signed-off-by: David Goulet <dgoulet@torproject.org>
In the past, when we exhausted all guards in our sampled set, we just
waited there till we mark a guard for retry again (usually takes 10 mins
for a primary guard, 1 hour for a non-primary guard). This patch marks
all guards as maybe-reachable when we exhaust all guards (this can
happen when network is down for some time).
Let A = UseBridges
Let B = ClientUseIPv4
Then firewall_is_fascist_impl expands and simplifies to:
B || (!(A || ...) && A)
B || (!A && ... && A)
B || 0
B
The microdesc consensus does not contain any IPv6 addresses.
When a client has a microdesc consensus but no microdescriptor, make it
use the hard-coded IPv6 address for the node (if available).
(Hard-coded addresses can come from authorities, fallback directories,
or configured bridges.)
If there is no hard-coded address, log a BUG message, and fail the
connection attempt. (All existing code checks for a hard-coded address
before choosing a node address.)
Fixes 20996, fix on b167e82 from 19608 in 0.2.8.5-alpha.
It is no longer possible for the IPv6 preference options to differ from the
IPv6 usage: preferring IPv6 implies possibly using IPv6.
Also remove the corresponding unit test warning message checks.
(But keep the unit tests themselves - they now run without warnings.)
In order to help an HS operator knowing if the application configured behind
it is not working properly, add a log at warning level for the connection
refused or timeout case. This log will only be printed if a client connection
fails and is rate limited.
Closes#21019
Signed-off-by: David Goulet <dgoulet@torproject.org>
