We'll eventually want to do more work here to make sure that the ports
are stable over multiple invocations. Otherwise, turning your node on
and off will get you a new DirPort/ORPort needlessly.
Otherwise, it will just immediately close any port declared with "auto"
on the grounds that it wasn't configured. Now, it will allow "auto" to
match any port.
This means FWIW if you configure a socks port with SocksPort 9999
and then transition to SocksPort auto, the original socksport will
not get closed and reopened. I'm considering this a feature.
HTTPS error code 403 is now reported as:
"The https proxy refused to allow connection".
Used a switch statement for additional error codes to be explained
in the future.
The old behavior contributed to unreliability when hidden services and
hsdirs had different consensus versions, and so had different opinions
about who should be cacheing hsdir info.
Bugfix on 0.2.0.10-alpha; based on discussions surrounding bug 2732.
The new behavior is to try to rename the old file if there is one there
that we can't read. In all likelihood, that will fail too, but at least
we tried, and at least it won't crash.
Conflicts throughout. All resolved in favor of taking HEAD and
adding tor_mem* or fast_mem* ops as appropriate.
src/common/Makefile.am
src/or/circuitbuild.c
src/or/directory.c
src/or/dirserv.c
src/or/dirvote.c
src/or/networkstatus.c
src/or/rendclient.c
src/or/rendservice.c
src/or/router.c
src/or/routerlist.c
src/or/routerparse.c
src/or/test.c
Here I looked at the results of the automated conversion and cleaned
them up as follows:
If there was a tor_memcmp or tor_memeq that was in fact "safe"[*] I
changed it to a fast_memcmp or fast_memeq.
Otherwise if there was a tor_memcmp that could turn into a
tor_memneq or tor_memeq, I converted it.
This wants close attention.
[*] I'm erring on the side of caution here, and leaving some things
as tor_memcmp that could in my opinion use the data-dependent
fast_memcmp variant.
Make that explicit by adding an assert and removing a null-check. All of
its callers currently depend on the argument being non-null anyway.
Silences a few clang complaints.
The analyzer assumed that bootstrap_percent could be less than 0 when we
call control_event_bootstrap_problem(), which would mean we're calling
log_fn() with undefined values. The assert makes it clear this can't
happen.
See bug 2850 for rationale: it appears that on some busy exits, the OS
decides that every single port is now unusable because they have been
all used too recently.
Previously we ensured that it would get called periodically by doing
it from inside the code that added microdescriptors. That won't work
though: it would interfere with our code that tried to read microdescs
from disk initially. Instead, we should consider rebuilding the cache
periodically, and on startup.
Previously on 0.2.2, we'd never clean the cache. Now that we can
clean it, we want to add a condition to rebuild it: that should happen
whenever we have dropped enough microdescriptors that we could save a
lot of space.
No changes file, since 0.2.3 doesn't need one and 0.2.2 already has some
changes files for the backport of the microdesc_clean_cahce() function.
Clients and relays haven't used them since early 0.2.0.x. The only
remaining use by authorities learning about new relays ahead of scedule;
see proposal 147 for what we intend to do about that.
We're leaving in an option (FetchV2Networkstatus) to manually fetch v2
networkstatuses, because apparently dnsel and maybe bwauth want them.
This fixes bug 3022.
Previously it would erroneously return true if ListenAddr was set for
a client port, even if that port itself was 0. This would give false
positives, which were not previously harmful... but which were about
to become.
A v0 HS authority stores v0 HS descriptors in the same descriptor
cache that its HS client functionality uses. Thus, if the HS
authority operator clears its client HS descriptor cache, ALL v0
HS descriptors will be lost. That would be bad.
These functions can return NULL for otherwise-valid values of
time_t. Notably, the glibc gmtime manpage says it can return NULL
if the year if greater than INT_MAX, and the windows MSDN gmtime
page says it can return NULL for negative time_t values.
Also, our formatting code is not guaranteed to correctly handle
years after 9999 CE.
This patch tries to correct this by detecting NULL values from
gmtime/localtime_r, and trying to clip them to a reasonable end of
the scale. If they are in the middle of the scale, we call it a
downright error.
Arguably, it's a bug to get out-of-bounds dates like this to begin
with. But we've had bugs of this kind in the past, and warning when
we see a bug is much kinder than doing a NULL-pointer dereference.
Boboper found this one too.
If the user sent a SIGNAL NEWNYM command after we fetched a rendezvous
descriptor, while we were building the introduction-point circuit, we
would give up entirely on trying to connect to the hidden service.
Original patch by rransom slightly edited to go into 0.2.1
Previously, it would remove every trackhostexits-derived mapping
*from* xyz.<exitname>.exit; it was supposed to remove every
trackhostexits-derived mapping *to* xyz.<exitname>.exit.
Bugfix on 0.2.0.20-rc: fixes an XXX020 added while staring at bug-1090
issues.
Now we believe it to be the case that we never build a circuit for our
stream that has an unsuitable exit, so we'll never need to use such
a circuit. The risk is that we have some code that builds the circuit,
but now we refuse to use it, meaning we just build a bazillion circuits
and ignore them all.
This looked at first like another fun way around our node selection
logic: if we had introduction circuits, and we wound up building too
many, we would turn extras into general-purpose circuits. But when we
did so, we wouldn't necessarily check whether the general-purpose
circuits conformed to our node constraints. For example, the last
node could totally be in ExcludedExitNodes and we wouldn't have cared...
...except that the circuit should already be internal, so it won't get user
streams attached to it, so the transition should generally be allowed.
Add an assert to make sure we're right about this, and have it not
check whether ExitNodes is set, since that's irrelevant to internal
circuits.
IOW, if we were using TrackExitHosts, and we added an excluded node or
removed a node from exitnodes, we wouldn't actually remove the mapping
that points us at the new node.
Also, note with an XXX022 comment a place that I think we are looking
at the wrong string.
The routerset_equal function explicitly handles NULL inputs, so
there's no need to check inputs for NULL before calling it.
Also fix a bug in routerset_equal where a non-NULL routerset with no
entries didn't get counted as equal to a NULL routerset. This was
untriggerable, I think, but potentially annoying down the road.
ExcludeExitNodes foo now means that foo.exit doesn't work. If
StrictNodes is set, then ExcludeNodes foo also overrides foo.exit.
foo.exit , however, still works even if foo is not listed in ExitNodes.
This once maybe made sense when ExitNodes meant "Here are 3 exits;
use them all", but now it more typically means "Here are 3
countries; exit from there." Using non-Fast/Stable exits created a
potential partitioning opportunity and an annoying stability
problem.
(Don't worry about the case where all of our ExitNodes are non-Fast
or non-Stable: we handle that later in the function by retrying with
need_capacity and need_uptime set to 0.)
