Fixes a possible root cause of 11553 by only making 64 attempts at
most to pick a circuitID. Previously, we would test every possible
circuit ID until we found one or ran out.
This algorithm succeeds probabilistically. As the comment says:
This potentially causes us to give up early if our circuit ID
space is nearly full. If we have N circuit IDs in use, then we
will reject a new circuit with probability (N / max_range) ^
MAX_CIRCID_ATTEMPTS. This means that in practice, a few percent
of our circuit ID capacity will go unused.
The alternative here, though, is to do a linear search over the
whole circuit ID space every time we extend a circuit, which is
not so great either.
This makes new vs old clients distinguishable, so we should try to
batch it with other patches that do that, like 11438.
This means that tor can run without needing to communicate with ioctls
to the firewall, and therefore doesn't need to run with privileges to
open the /dev/pf device node.
A new TransProxyType is added for this purpose, "pf-divert"; if the user
specifies this TransProxyType in their torrc, then the pf device node is
never opened and the connection destination is determined with getsockname
(as per pf(4)). The default behaviour (ie., when TransProxyType is "default"
when using the pf firewall) is still to assume that pf is configured with
rdr-to rules.
This isn't on by default; to get it, you need to set "TransProxyType
ipfw". (The original patch had automatic detection for whether
/dev/pf is present and openable, but that seems marginally fragile.)
Libevent uses an arc4random implementation (I know, I know) to
generate DNS transaction IDs and capitalization. But it liked to
initialize it either with opening /dev/urandom (which won't work
under the sandbox if it doesn't use the right pointer), or with
sysctl({CTL_KERN,KERN_RANDOM,RANDOM_UUIC}). To make _that_ work, we
were permitting sysctl unconditionally. That's not such a great
idea.
Instead, we try to initialize the libevent PRNG _before_ installing
the sandbox, and make sysctl always fail with EPERM under the
sandbox.
Appearently, the majority of the filenames we pass to
sandbox_cfg_allow() functions are "freeable right after". So, consider
_all_ of them safe-to-steal, and add a tor_strdup() in the few cases
that aren't.
(Maybe buggy; revise when I can test.)
(If we don't restrict rename, there's not much point in restricting
open, since an attacker could always use rename to make us open
whatever they want.)
A new set of unit test cases are provided, as well as introducing
an alternative paradigm and macros to support it. Primarily, each test
case is given its own namespace, in order to isolate tests from each
other. We do this by in the usual fashion, by appending module and
submodule names to our symbols. New macros assist by reducing friction
for this and other tasks, like overriding a function in the global
namespace with one in the current namespace, or declaring integer
variables to assist tracking how many times a mock has been called.
A set of tests for a small-scale module has been included in this
commit, in order to highlight how the paradigm can be used. This
suite gives 100% coverage to status.c in test execution.
My first implementation was broken, since it returned "whether there
is one bridge" rather than "how many bridges."
Also, the implementation for the n_options_out feature in
choose_random_entry_impl was completely broken due to a missing *.
When we successfully create a usable circuit after it previously
timed out for a certain amount of time, we should make sure that
our public IP address hasn't changed and update our descriptor.
In C, it's a bad idea to do this:
char *cp = array;
char *end = array + array_len;
/* .... */
if (cp + 3 >= end) { /* out of bounds */ }
because cp+3 might be more than one off the end of the array, and
you are only allowed to construct pointers to the array elements,
and to an element one past the end. Instead you have to say
if (cp - array + 3 >= array_len) { /* ... */ }
or something like that.
This patch fixes two of these: one in process_versions_cell
introduced in 0.2.0.10-alpha, and one in process_certs_cell
introduced in 0.2.3.6-alpha. These are both tracked under bug
10363. "bobnomnom" found and reported both. See also 10313.
In our code, this is likely to be a problem as we used it only if we
get a nasty allocator that makes allocations end close to (void*)-1.
But it's best not to have to worry about such things at all, so
let's just fix all of these we can find.
According to reports, most programs degrade somewhat gracefully on
getting no answer for an MX or a CERT for www.example.com, but many
flip out completely on a NOTIMPL error.
Also, treat a QTYPE_ALL query as just asking for an A record.
The real fix here is to implement proposal 219 or something like it.
Fixes bug 10268; bugfix on 0.2.0.1-alpha.
Based on a patch from "epoch".
Found by testing with chutney. The old behavior was "fail an
assertion", which obviously isn't optimal.
Bugfix on 8b9a2cb68b290e550695124d7ef0511225b451d5; bug not in any
released version.
Also, stop accepting the old kind of RESOLVED cells with no TTL
fields; they haven't been sent since 0.1.1.6-alpha.
This patch won't work without the fix to #10468 -- it will break
DNSPorts unless they set the proper ipv4/6 flags on entry_connection_t.
Otherwise, it could mung the thing that came over the net on windows,
which would defeat the purpose of recording the unparseable thing.
Fixes bug 11342; bugfix on 0.2.2.1-alpha.
This is a fix for 9963. I say this is a feature, but if it's a
bugfix, it's a bugfix on 0.2.4.18-rc.
Old behavior:
Mar 27 11:02:19.000 [notice] Bootstrapped 50%: Loading relay descriptors.
Mar 27 11:02:20.000 [notice] Bootstrapped 51%: Loading relay descriptors.
Mar 27 11:02:20.000 [notice] Bootstrapped 52%: Loading relay descriptors.
... [Many lines omitted] ...
Mar 27 11:02:29.000 [notice] Bootstrapped 78%: Loading relay descriptors.
Mar 27 11:02:33.000 [notice] We now have enough directory information to build circuits.
New behavior:
Mar 27 11:16:17.000 [notice] Bootstrapped 50%: Loading relay descriptors
Mar 27 11:16:19.000 [notice] Bootstrapped 55%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 60%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 65%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 70%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] Bootstrapped 75%: Loading relay descriptors
Mar 27 11:16:21.000 [notice] We now have enough directory information to build circuits.
Most of these are simple. The only nontrivial part is that our
pattern for using ENUM_BF was confusing doxygen by making declarations
that didn't look like declarations.
In circuitlist_free_all, we free all the circuits, removing them from
the map as we go, but we weren't actually freeing the placeholder
entries that we use to indicate pending DESTROY cells.
Fix for bug 11278; bugfix on the 7912 code that was merged in
0.2.5.1-alpha
There are still quite a few 0.2.3.2x relays running for x<5, and while I
agree they should upgrade, I don't think cutting them out of the network
is a net win on either side.
This contains the obvious implementation using the circuitmux data
structure. It also runs the old (slow) algorithm and compares
the results of the two to make sure that they're the same.
Needs review and testing.
This change prevents LD_BUG warnings and bootstrap failure messages
when we try to do directory fetches when starting with
DisableNetwork == 1, a consensus present, but no descriptors (or
insufficient descriptors) yet.
Fixes bug 11200 and bug 10405. It's a bugfix on 0.2.3.9-alpha.
Thanks to mcs for walking me through the repro instructions!
This is meant to be a better bug 9229 fix -- or at least, one more
in tune with the intent of the original code, which calls
router_retry_directory_downloads() only on the first bridge descriptor.
This prevents long stalls when we're starting with a state file but
with no bridge descriptors. Fixes bug 9229. I believe this bug has
been present since 0.2.0.3-alpha.
By default, after you've made a connection to port XYZ, we assume
you might still want to have an exit ready to connect to XYZ for one
hour. This patch lets you lower that interval.
Implements ticket 91
This should fixes some "hey, that function could have
__attribute__((noreturn))" warnings introduced by f96400d9.
Bug not in any released version of Tor.
We have ignored any ports listed here since 80365b989 (0.0.7rc1),
but we didn't warn the user that we were ignoring them. This patch
adds a warning if you put explicit ports in any of the options
{Socks,Dir}Policy or AuthDir{Reject,Invalid,BadDir,BadExit}. It
also adjusts the manpage to say that ports are ignored.
Fixes ticket 11108.
In a couple of places, to implement the OOM-circuit-killer defense
against sniper attacks, we have counters to remember the age of
cells or data chunks. These timers were based on wall clock time,
which can move backwards, thus giving roll-over results for our age
calculation. This commit creates a low-budget monotonic time, based
on ratcheting gettimeofday(), so that even in the event of a time
rollback, we don't do anything _really_ stupid.
A future version of Tor should update this function to do something
even less stupid here, like employ clock_gettime() or its kin.
Back in 5e762e6a5c, non-exit servers
stopped launching DNS requests for users. So there's no need for them
to see if their DNS answers are hijacked.
Patch from Matt Pagan. I think this is a 965 fix.
For a client using a SocksPort connection and IPv6, the connect reply
from tor daemon did not handle AF_INET6 thus sending back the wrong
payload to the client.
A changes file is provided and this fixes#10987
Signed-off-by: David Goulet <dgoulet@ev0ke.net>
When we have more than two return values, we should really be using
an enum rather than "-2 means this, -1 means that, 0 means this, and
1 or more means a number."
On busy servers, this function takes up something like 3-7% in
different profiles, and gets invoked every time we need to participate
as the midpoint in a hidden service.
So maybe walking through a linked list of all the circuits here wasn't
a good idea.
We log only one message, containing a complete list of what's
wrong. We log the complete list whenever any of the possible things
that could have gotten wrong gets worse.
Fix for #9870. Bugfix on 10480dff01, which we merged in
0.2.5.1-alpha.
This patch splits out some of the functions in OOM handling so that
it's easier to check them without involving the rest of Tor or
requiring that the circuits be "wired up".
It's increasingly apparent that we want to make sure we initialize our
PRNG nice and early, or else OpenSSL will do it for us. (OpenSSL
doesn't do _too_ bad a job, but it's nice to do it ourselves.)
We'll also need this for making sure we initialize the siphash key
before we do any hashes.
I've made an exception for cases where I'm sure that users can't
influence the inputs. This is likely to cause a slowdown somewhere,
but it's safer to siphash everything and *then* look for cases to
optimize.
This patch doesn't actually get us any _benefit_ from siphash yet,
since we don't really randomize the key at any point.
These options were added back in 0.1.2.5-alpha, but no longer make any
sense now that all directories support tunneled connections and
BEGIN_DIR cells. These options were on by default; now they are
always-on.
This is a fix for 10849, where TunnelDirConns 0 would break hidden
services -- and that bug arrived, I think, in 0.2.0.10-alpha.
(There is no longer meaningfully any such thing as a HS authority,
since we stopped uploading or downloading v0 hs descriptors in
0.2.2.1-alpha.)
Implements #10881, and part of #10841.
This patch removes an "if (chan)" that occurred at a place where
chan was definitely non-NULL. Having it there made some static
analysis tools conclude that we were up to shenanigans.
This resolves#9979.
Right now this accounts for about 1% of circuits over all, but if you
pick a guard that's running 0.2.3, it will be about 6% of the circuits
running through that guard.
Making sure that every circuit has at least one ntor link means that
we're getting plausibly good forward secrecy on every circuit.
This implements ticket 9777,
It's possible to set your ExitNodes to contains only exits that don't
have the Exit flag. If you do that, we'll decide that 0 of your exits
are working. Instead, in that case we should look at nodes which have
(or which might have) exit policies that don't reject everything.
Fix for bug 10543; bugfix on 0.2.4.10-alpha.
According to control spec, longname should not contain any spaces and is
consists only of identy_digest + nickname
added two functions:
* node_get_verbose_nickname_by_id()
* node_describe_longname_by_id()
If you want a slow shutdown, send SIGNAL SHUTDOWN.
(Why not just have the default be SIGNAL QUIT? Because this case
should only happen when an owning controller has crashed, and a
crashed controller won't be able to give the user any "tor is
shutting down" feedback, and so the user gets confused for a while.
See bug 10449 for more info)
I'm doing this because:
* User doesn't mean you're running as root, and running as root
doesn't mean you've set User.
* It's possible that the user has done some other
capability-based hack to retain the necessary privileges.
The remaining vestige is that we continue to publish the V2dir flag,
and that, for the controller, we continue to emit v2 directory
formats when requested.
Previously, we would sometimes decide in directory_get_from_hs_dir()
to connect to an excluded node, and then later in
directory_initiate_command_routerstatus_rend() notice that it was
excluded and strictnodes was set, and catch it as a stopgap.
Additionally, this patch preferentially tries to fetch from
non-excluded nodes even when StrictNodes is off.
Fix for bug #10722. Bugfix on 0.2.0.10-alpha (the v2 hidserv directory
system was introduced in e136f00ca). Reported by "mr-4".
If we don't, we can wind up with a wedged cpuworker, and write to it
for ages and ages.
Found by skruffy. This was a bug in 2dda97e8fd, a.k.a. svn
revision 402. It's been there since we have been using cpuworkers.
When I introduced the unusable_for_new_circuits flag in
62fb209d83, I had a spurious ! in the
circuit_stream_is_being_handled loop. This made us decide that
non-unusable circuits (that is, usable ones) were the ones to avoid,
and caused it to launch a bunch of extra circuits.
Fixes bug 10456; bugfix on 0.2.4.12-alpha.
When we wrote the directory request statistics code in August 2009, we
thought that these statistics were only relevant for bridges, and that
bridges should not report them. That's why we added a switch to discard
relevant observations made by bridges. This code was first released in
0.2.2.1-alpha.
In May 2012 we learned that we didn't fully disable directory request
statistics on bridges. Bridges did report directory request statistics,
but these statistics contained empty dirreq-v3-ips and dirreq-v3-reqs
lines. But the remaining dirreq-* lines have always been non-empty. (We
didn't notice for almost three years, because directory-request statistics
were disabled by default until 0.2.3.1-alpha, and all statistics have been
removed from bridge descriptors before publishing them on the metrics
website.)
Proposal 201, created in May 2012, suggests to add a new line called
bridge-v3-reqs that is similar to dirreq-v3-reqs, but that is published
only by bridges. This proposal is still open as of December 2013.
Since October 2012 we're using dirreq-v3-resp (not -reqs) lines in
combination with bridge-ips lines to estimate bridge user numbers; see
task 8462. This estimation method has superseded the older approach that
was only based on bridge-ips lines in November 2013. Using dirreq-v3-resp
and bridge-ips lines is a workaround. The cleaner approach would be to
use dirreq-v3-reqs instead.
This commit makes bridges report the same directory request statistics as
relays, including dirreq-v3-ips and dirreq-v3-reqs lines. It makes
proposal 201 obsolete.
In 0.2.3.8-alpha we attempted to "completely disable stats if we aren't
running as a relay", but instead disabled them only if we aren't running
as a server.
This commit leaves DirReqStatistics enabled on both relays and bridges,
and disables (Cell,Entry,ExitPort)Statistics on bridges.
The 'body' field of a microdesc_t holds a strdup()'d value if the
microdesc's saved_location field is SAVED_IN_JOURNAL or
SAVED_NOWHERE, and holds a pointer to the middle of an mmap if the
microdesc is SAVED_IN_CACHE. But we weren't setting that field
until a while after we parsed the microdescriptor, which left an
interval where microdesc_free() would try to free() the middle of
the mmap().
This patch also includes a regression test.
This is a fix for #10409; bugfix on 0.2.2.6-alpha.
The old behavior was that NULL matched only bridges without known
identities; the correct behavior is that NULL should match all
bridges (assuming that their addr:port matches).
We were checking whether a 8-bit length field had overflowed a
503-byte buffer. Unless somebody has found a way to store "504" in a
single byte, it seems unlikely.
Fix for 10313 and 9980. Based on a pach by Jared L Wong. First found
by David Fifield with STACK.
It's conceivable (but probably impossible given our code) that lseek
could return -1 on an error; when that happens, we don't want off to
become -1.
Fixes CID 1035124.
This was a mistake in the merge commit 7a2b30fe16. It
would have made the CellStatistics code give completely bogus
results. Bug not in any released Tor.
We had accidentially grown two fake ones: one for backtrace.c, and one
for sandbox.c. Let's do this properly instead.
Now, when we configure logs, we keep track of fds that should get told
about bad stuff happening from signal handlers. There's another entry
point for these that avoids using non-signal-handler-safe functions.
On platforms with the backtrace/backtrace_symbols_fd interface, Tor
can now dump stack traces on assertion failure. By default, I log
them to DataDir/stack_dump and to stderr.
Conflicts:
src/or/or.h
src/or/relay.c
Conflicts were simple to resolve. More fixes were needed for
compilation, including: reinstating the tv_to_msec function, and renaming
*_conn_cells to *_chan_cells.
In proposal 157, we added a cross-certification element for
directory authority certificates. We implemented it in
0.2.1.9-alpha. All Tor directory authorities now generate it.
Here, as planned, make it required, so that we can finally close
proposal 157.
The biggest change in the code is in the unit test data, where some
old hardcoded certs that we made long ago have become no longer
valid and now need to be replaced.
Previously, when we ran low on memory, we'd close whichever circuits
had the most queued cells. Now, we close those that have the
*oldest* queued cells, on the theory that those are most responsible
for us running low on memory, and that those are the least likely to
actually drain on their own if we wait a little longer.
Based on analysis from a forthcoming paper by Jansen, Tschorsch,
Johnson, and Scheuermann. Fixes bug 9093.
Roger spotted this on tor-dev in his comments on proposal 221.
We etect DESTROY vs everything else, since arma likes network
timeout indicating failure but not overload indicating failure.
Don't cast uint64_t * to const uint64_t * explicitly. The cast is always
safe, so C does it for us. Doing the cast explitictly can hide bugs if
the input is secretly the wrong type.
Suggested by Nick.
As a bridge authority, before we create our networkstatus document, we
should compute the thresholds needed for the various status flags
assigned to each bridge based on the status of all other bridges. We
then add these thresholds to the networkstatus document for easy access.
Fixes for #1117 and #9859.
Also fix a bug where if the guard we choose first doesn't answer, we
would try the second guard, but once we connected to the second guard
we would abandon it and retry the first one, slowing down bootstrapping.
The fix in both cases is to treat all our initially chosen guards as
acceptable to use.
Fixes bug 9946.
We had updated our "do we have enough microdescs to begin building
circuits?" logic most recently in 0.2.4.10-alpha (see bug 5956), but we
left the bootstrap status event logic at "how far through getting 1/4
of them are we?"
Fixes bug 9958; bugfix on 0.2.2.36, which is where they diverged (see
bug 5343).
The old code had logic to use a shorter path length if we didn't
have enough nodes. But we don't support 2-node networks anwyay.
Fix for #9926. I'm not calling this a bugfix on any particular
version, since a 2-node network would fail to work for you for a lot
of other reasons too, and it's not clear to me when that began, or if
2-node networks would ever have worked.
By calling circuit_n_chan_done() unconditionally on close, we were
closing pending connections that might not have been pending quite for
the connection we were closing. Fix for bug 9880.
Thanks to skruffy for finding this and explaining it patiently until
we understood.
this was causing directory authorities to send a time of 0 on all
connections they generated themselves, which means everybody reachability
test caused a time skew warning in the log for that relay.
(i didn't just revert, because the changes file has been modified by
other later commits.)
This isn't actually much of an issue, since only relays send
AUTHENTICATE cells, but while we're removing timestamps, we might as
well do this too.
Part of proposal 222. I didn't take the approach in the proposal of
using a time-based HMAC, since that was a bad-prng-mitigation hack
from SSL3, and in real life, if you don't have a good RNG, you're
hopeless as a Tor server.
For now, round down to the nearest 10 minutes. Later, eliminate entirely by
setting a consensus parameter.
(This rounding is safe because, in 0.2.2, where the timestamp mattered,
REND_REPLAY_TIME_INTERVAL was a nice generous 60 minutes.)
We were freeing these on exit, but when we added the dl_status_map
field to them in fddb814f, we forgot to arrange for it to be freed.
I've moved the cert_list_free() code into its own function, and added
an appropriate dsmap_free() call.
Fixes bug 9644; bugfix on 0.2.4.13-alpha.
The problem was that the server_identity_key_is_set() function could
return true under conditions where we don't really have an identity
key -- specifically, where we used to have one, but we stopped being a
server.
This is a fix for 6979; bugfix on 0.2.2.18-alpha where we added that
assertion to get_server_identity_key().
Whenever we had an non-option commandline arguments *and*
option-bearing commandline arguments on the commandline, we would save
only the latter across invocations of options_init_from_torrc, but
take their existence as license not to re-parse the former. Yuck!
Incidentally, this fix lets us throw away the backup_arg[gv] logic.
Fix for bug 9746; bugfix on d98dfb3746,
not in any released Tor. Found by Damian. Thanks, Damian!
This just goes to show: never cast a function pointer. Found while
testing new command line parse logic.
Bugfix on 1293835440, which implemented
6752: Not in any released tor.
Fall back to SOMAXCONN if INT_MAX doesn't work.
We'd like to do this because the actual maximum is overrideable by the
kernel, and the value in the header file might not be right at all.
All implementations I can find out about claim that this is supported.
Fix for 9716; bugfix on every Tor.
Now we explicitly check for overflow.
This approach seemed smarter than a cascade of "change int to unsigned
int and hope nothing breaks right before the release".
Nick, feel free to fix in a better way, maybe in master.
This would make us do testing circuits "even when cbt is disabled by
consensus, or when we're a directory authority, or when we've failed
to write cbt history to our state file lately." (Roger's words.)
This is a fix for 9671 and an improvement in our fix for 5049.
The original misbehavior was in 0.2.2.14-alpha; the incomplete
fix was in 0.2.3.17-beta.
(In practice they don't exist, but so long as we're making changes for
standards compliance...)
Also add several more unit tests for good and bad URL types.
There were only two functions outside of circuitstats that actually
wanted to know what was inside this. Making the structure itself
hidden should help isolation and prevent us from spaghettifying the
thing more.
The spec requires them to do so, and not doing so creates a situation
where they can't send-test because relays won't extend to them because
of the other part of bug 9546.
Fixes bug 9546; bugfix on 0.2.3.6-alpha.
The spec requires them to do so, and not doing so creates a situation
where they can't send-test because relays won't extend to them because
of the other part of bug 9546.
Fixes bug 9546; bugfix on 0.2.3.6-alpha.
(Backport to Tor 0.2.3)
Relays previously, when initiating a connection, would only send a
NETINFO after sending an AUTHENTICATE. But bridges, when receiving a
connection, would never send AUTH_CHALLENGE. So relays wouldn't
AUTHENTICATE, and wouldn't NETINFO, and then bridges would be
surprised to be receiving CREATE cells on a non-open circuit.
Fixes bug 9546.
Relays previously, when initiating a connection, would only send a
NETINFO after sending an AUTHENTICATE. But bridges, when receiving a
connection, would never send AUTH_CHALLENGE. So relays wouldn't
AUTHENTICATE, and wouldn't NETINFO, and then bridges would be
surprised to be receiving CREATE cells on a non-open circuit.
Fixes bug 9546.
Use the generic function for both the ControlPort cookie and the
ExtORPort cookie.
Also, place the global cookie variables in the heap so that we can
pass them around more easily as pointers.
Also also, fix the unit tests that broke by this change.
Conflicts:
src/or/config.h
src/or/ext_orport.c
memwipe some stack-allocated stuff
Add DOCDOC comments for state machines
Use memdup_nulterm as appropriate
Check for NULs in useraddr
Add a macro so that <= AUTH_MAX has a meaning.
- Don't leak if a transport proxy sends us a TRANSPORT command more
than once.
- Don't use smartlist_string_isin() in geoip_get_transport_history().
(pointed out by Nick)
- Use the 'join' argument of smartlist_join_strings() instead of
trying to write the separator on our own.
(pointed out by Nick)
- Document 'ext_or_transport' a bit better.
(pointed out by Nick)
- Be a bit more consistent with the types of the values of 'transport_counts'.
(pointed out by Nick)
Fortunately, later checks mean that uninitialized data can't get sent
to the network by this bug. Unfortunately, reading uninitialized heap
*can* (in some cases, with some allocators) cause a crash if you get
unlucky and go off the end of a page.
Found by asn. Bugfix on 0.2.4.1-alpha.
Both 'managed_proxy_list' and 'unconfigured_proxies_n' are global
src/or/transports.c variables that are not initialized properly when
unit tests are run.
When we moved channel_matches_target_addr_for_extend() into a separate
function, its sense was inverted from what one might expect, and we
didn't have a ! in one place where we should have.
Found by skruffy.
When we moved channel_matches_target_addr_for_extend() into a separate
function, its sense was inverted from what one might expect, and we
didn't have a ! in one place where we should have.
Found by skruffy.
I added this so I could write a unit test for ServerTransportOptions,
but it incidentally exercises the succeed-on-defaults case of
options_validate too.
Previously we would accept relative paths, but only if they contained a
slash somewhere (not at the end).
Otherwise we would silently not work. Closes: #9258. Bugfix on
0.2.3.16-alpha.
If you pass the --enable-coverage flag on the command line, we build
our testing binaries with appropriate options eo enable coverage
testing. We also build a "tor-cov" binary that has coverage enabled,
for integration tests.
On recent OSX versions, test coverage only works with clang, not gcc.
So we warn about that.
Also add a contrib/coverage script to actually run gcov with the
appropriate options to generate useful .gcov files. (Thanks to
automake, the .o files will not have the names that gcov expects to
find.)
Also, remove generated gcda and gcno files on clean.
We previously used FILENAME_PRIVATE identifiers mostly for
identifiers exposed only to the unit tests... but also for
identifiers exposed to the benchmarker, and sometimes for
identifiers exposed to a similar module, and occasionally for no
really good reason at all.
Now, we use FILENAME_PRIVATE identifiers for identifiers shared by
Tor and the unit tests. They should be defined static when we
aren't building the unit test, and globally visible otherwise. (The
STATIC macro will keep us honest here.)
For identifiers used only by the unit tests and never by Tor at all,
on the other hand, we wrap them in #ifdef TOR_UNIT_TESTS.
This is not the motivating use case for the split test/non-test
build system; it's just a test example to see how it works, and to
take a chance to clean up the code a little.
This is mainly a matter of automake trickery: we build each static
library in two versions now: one with the TOR_UNIT_TESTS macro
defined, and one without. When TOR_UNIT_TESTS is defined, we can
enable mocking and expose more functions. When it's not defined, we
can lock the binary down more.
The alternatives would be to have alternate build modes: a "testing
configuration" for building the libraries with test support, and a
"production configuration" for building them without. I don't favor
that approach, since I think it would mean more people runnning
binaries build for testing, or more people not running unit tests.
Fix a bug in the voting algorithm that could yield incorrect results
when a non-naming authority declared too many flags. Fixes bug 9200;
bugfix on 0.2.0.3-alpha.
Found by coverity scan.
This implements "algorithm 1" from my discussion of bug #9072: on OOM,
find the circuits with the longest queues, and kill them. It's also a
fix for #9063 -- without the side-effects of bug #9072.
The memory bounds aren't perfect here, and you need to be sure to
allow some slack for the rest of Tor's usage.
This isn't a perfect fix; the rest of the solutions I describe on
codeable.
In my #7912 fix, there wasn't any code to remove entries from the
(channel, circuit ID)->circuit map corresponding to queued but un-sent
DESTROYs.
Spotted by skruffy. Fixes bug 9082; bug not in any released Tor.
I added the code to pass a destroy cell to a queueing function rather
than writing it immediately, and the code to remember that we
shouldn't reuse the circuit id until the destroy is actually sent, and
the code to release the circuit id once the destroy has been sent...
and then I finished by hooking destroy_cell_queue into the rest of
Tor.
This is a reprise of the fix in bdff7e3299d78; 6905c1f6 reintroduced
that bug. Briefly: windows doesn't seem to like deleting a mapped
file. I tried adding the PROT_SHARED_DELETE flag to the createfile
all, but that didn't actually fix this issue. Fortunately, the unit
test I added in 4f4fc63fea should
prevent us from making this particular screw-up again.
This patch also tries to limit the crash potential of a failure to
write by a little bit, although it could do a better job of retaining
microdescriptor bodies.
Fix for bug 8822, bugfix on 0.2.4.12-alpha.
There's an assertion failure that can occur if a connection has
optimistic data waiting, and then the connect() call returns 0 on the
first attempt (rather than -1 and EINPROGRESS). That latter behavior
from connect() appears to be an (Open?)BSDism when dealing with remote
addresses in some cases. (At least, I've only seen it reported with
the BSDs under libevent, even when the address was 127.0.0.1. And
we've only seen this problem in Tor with OpenBSD.)
Fixes bug 9017; bugfix on 0.2.3.1-alpha, which first introduced
optimistic data. (Although you could also argue that the commented-out
connection_start_writing in 155c9b80 back in 2002 is the real source
of the issue.)
A new option TestingV3AuthVotingStartOffset is added which offsets the
starting time of the voting interval. This is possible only when
TestingTorNetwork is set.
This patch makes run_scheduled_events() check for new consensus
downloads every second when TestingTorNetwork, instead of every
minute. This should be fine, see #8532 for reasoning.
This patch also brings MIN_VOTE_SECONDS and MIN_DIST_SECONDS down from
20 to 2 seconds, unconditionally. This makes sanity checking of
misconfiguration slightly less sane.
Addresses #8532.
You can't use != to compare arbitary members of or_options_t.
(Also, generate a better error message to say which Testing* option
was set.)
Fix for bug 8992. Bugfix on b0d4ca49. Bug not in any released Tor.
- Rename n_read and n_written in origin_circuit_t to make it clear that
these are only used for CIRC_BW events.
- Extract new code in control_update_global_event_mask to new
clear_circ_bw_fields function.
- Avoid control_event_refill_global function with 13 arguments and
increase code reuse factor by moving more code from control.c to
connection.c.
- Avoid an unsafe uint32_t -> int cast.
- Add TestingEnableTbEmptyEvent option.
- Prepare functions for testing.
- Rename a few functions and improve documentation.
- Move cell_command_to_string from control.c to command.c.
- Use accessor for global_circuitlist instead of extern.
- Add a struct for cell statistics by command instead of six arrays.
- Split up control_event_circuit_cell_stats by using two helper functions.
- Add TestingEnableCellStatsEvent option.
- Prepare functions for testing.
- Rename a few variables and document a few things better.
- Move new ID= parameter in ORCONN event to end. Avoids possible trouble
from controllers that parse parameters by position, even though they
shouldn't.
Create new methods check_or_create_data_subdir() and
write_to_data_subdir() in config.c and use them throughout
rephist.c and geoip.c.
This should solve ticket #4282.
This is a fix for bug 8844, where eugenis correctly notes that there's
a sentinel value at the end of the list-of-freelists that's never
actually checked. It's a bug since the first version of the chunked
buffer code back in 0.2.0.16-alpha.
This would probably be a crash bug if it ever happens, but nobody's
ever reported something like this, so I'm unsure whether it can occur.
It would require write_to_buf, write_to_buf_zlib, read_to_buf, or
read_to_buf_tls to get an input size of more than 32K. Still, it's a
good idea to fix this kind of thing!
It appears that moria1 crashed because of one instance of this (the
one in router_counts_toward_thresholds). The other instance I fixed
won't actually have broken anything, but I think it's more clear this
way.
Fixes bug 8833; bugfix on 0.2.4.12-alpha.
We need to subtract both the current built circuits *and* the attempted
circuits from the attempt count during scaling, since *both* have already been
counted there.
It sure is a good thing we can run each test in its own process, or
else the amount of setup I needed to do to make this thing work
would have broken all the other tests.
Test mocking would have made this easier to write too.
Now we can compute the hash and signature of a dirobj before
concatenating the smartlist, and we don't need to play silly games
with sigbuf and realloc any more.
I believe this was introduced in 6bc071f765, which makes
this a fix on 0.2.0.10-alpha. But my code archeology has not extended
to actually testing that theory.
We were mixing bandwidth file entries (which are in kilobytes) with
router_get_advertised_bw() entries, which were in bytes.
Also, use router_get_advertised_bandwidth_capped() for credible_bandwidth.
Since 7536c40 only DNS results for real SOCKS requests are added to the cache,
but not DNS results for DNSPort queries or control connection RESOLVE queries.
Only cache additions would trigger ADDRMAP events on successful resolve.
Change it so that DNS results received after a RESOLVE command also generate
ADDRMAP events.
There was a bug in Tor prior to 0.2.4.10-alpha that allowed counts to
become invalid. Clipping the counts at startup allows us to rule out
log messages due to corruption from these prior Tor versions.
This was causing dirauths to emit flag weight validation warns if there
was a sufficiently large amount of badexit bandwidth to make a difference in
flag weight results.
It seems that some versions of clang that would prefer the
-Wswitch-enum compiler flag to warn about switch statements with
missing enum values, even if those switch statements have a
default.
Fixes bug 8598; bugfix on 0.2.4.10-alpha.
Found while investigating 8093, but probably not the cause of it,
since this bug would result in us sending too few SENDMEs, not in us
receiving SENDMEs unexpectedly.
Bugfix on the fix for 7889, which has appeared in 0.2.4.10-alpha, but
not yet in any released 0.2.3.x version.
It can never be NULL, since it's an array in bridge_line_t.
Introduced in 266f8cddd8. Found by coverity; this is CID 992691. Bug
not in any released Tor.
If we get a write error on a SOCKS connection, we can't send a
SOCKS reply, now can we?
This bug has been here since 36baf7219, where we added the "hey, I'm
closing an AP connection but I haven't finished the socks
handshake!" message. It's bug 8427.
Also, don't call the exit node 'reject *' unless our decision to pick
that node was based on a non-summarized version of that node's exit
policy.
rransom and arma came up with the ideas for this fix.
Fix for 7582; the summary-related part is a bugfix on 0.2.3.2-alpha.
When we're hibernating, the main reqason we can't bootstrap will
always be that we're hibernating: reporting anything else at severity
WARN is pointless.
Fixes part of 7302.
This bug affects hosts where time_t is unsigned, which AFAICT does
not include anything we currently support. (It _does_ include
OpenVMS, about a month of BSD4.2's history[1], and a lot of the 1970s.)
There are probably more bugs when time_t is unsigned. This one was
[1] http://mail-index.netbsd.org/tech-userlevel/1998/06/04/0000.html
This time, I'm checking whether our calculated offset matches our
real offset, in each case, as we go along. I don't think this is
the bug, but it can't hurt to check.
This should have been 2 bytes all along, since version numbers can
be 16 bits long. This isn't a live bug, since the call to
is_or_protocol_version_known in channel_tls_process_versions_cell
will reject any version number not in the range 1..4. Still, let's
fix this before we accidentally start supporting version 256.
Reported pseudonymously. Fixes bug 8062; bugfix on 0.2.0.10-alpha --
specifically, on commit 6fcda529, where during development I
increased the width of a version to 16 bits without changing the
type of link_proto.
Our ++ should have been += 2. This means that we'd accept version
numbers even when they started at an odd position.
This bug should be harmless in practice for so long as every version
number we allow begins with a 0 byte, but if we ever have a version
number starting with 1, 2, 3, or 4, there will be trouble here.
Fix for bug 8059, reported pseudonymously. Bugfix on 0.2.0.10-alpha
-- specifically, commit 6fcda529, where during development I
increased the width of a version to 16 bits without changing the
loop step.
I have no idea whether b0rken clients will DoS the network if the v2
authorities all turn this on or not. It's experimental. See #6783 for
a description of how to test it more or less safely, and please be
careful!
Now that circid_t is 4 bytes long, the default integer promotions will
leave it alone when sizeof(int) == 4, which will leave us formatting an
unsigned as an int. That's technically undefined behavior.
Fixes bug 8447 on bfffc1f0fc. Bug not
in any released Tor.
In a number of places, we decrement timestamp_dirty by
MaxCircuitDirtiness in order to mark a stream as "unusable for any
new connections.
This pattern sucks for a few reasons:
* It is nonobvious.
* It is error-prone: decrementing 0 can be a bad choice indeed.
* It really wants to have a function.
It can also introduce bugs if the system time jumps backwards, or if
MaxCircuitDirtiness is increased.
So in this patch, I add an unusable_for_new_conns flag to
origin_circuit_t, make it get checked everywhere it should (I looked
for things that tested timestamp_dirty), and add a new function to
frob it.
For now, the new function does still frob timestamp_dirty (after
checking for underflow and whatnot), in case I missed any cases that
should be checking unusable_for_new_conns.
Fixes bug 6174. We first used this pattern in 516ef41ac1,
which I think was in 0.0.2pre26 (but it could have been 0.0.2pre27).
Without this patch, there's no way to know what went wrong when we
fail to parse a torrc line entirely (that is, we can't turn it into
a K,V pair.) This patch introduces a new function that yields an
error message on failure, so we can at least tell the user what to
look for in their nonfunctional torrc.
(Actually, it's the same function as before with a new name:
parse_config_line_from_str is now a wrapper macro that the unit
tests use.)
Fixes bug 7950; fix on 0.2.0.16-alpha (58de695f90) which first
introduced the possibility of a torrc value not parsing correctly.
This patch moves the measured_bw field and the has_measured_bw field
into vote_routerstatus_t, since only votes have 'Measured=XX' set on
their weight line.
I also added a new bw_is_unmeasured flag to routerstatus_t to
represent the Unmeasured=1 flag on a w line. Previously, I was using
has_measured_bw for this, which was quite incorrect: has_measured_bw
means that the measured_bw field is set, and it's probably a mistake
to have it serve double duty as meaning that 'baandwidth' represents a
measured value.
While making this change,I also found a harmless but stupid bug in
dirserv_read_measured_bandwidths: It assumes that it's getting a
smartlist of routerstatus_t, when really it's getting a smartlist of
vote_routerstatus_t. C's struct layout rules mean that we could never
actually get an error because of that, but it's still quite incorrect.
I fixed that, and in the process needed to add two more sorting and
searching helpers.
Finally, I made the Unmeasured=1 flag get parsed. We don't use it for
anything yet, but someday we might.
This isn't complete yet -- the new 2286 unit test doesn't build.
Instead of capping whenever a router has fewer than 3 measurements,
we cap whenever a router has fewer than 3 measurements *AND* there
are at least 3 authorities publishing measured bandwidths.
We also generate bandwidth lines with a new "Unmeasured=1" flag,
meaning that we didn't have enough observations for a node to use
measured bandwidth values in the authority's input, whether we capped
it or not.
Stop marking every relay as having been down for one hour every
time we restart a directory authority. These artificial downtimes
were messing with our Stable and Guard flag calculations.
Fixes bug 8218 (introduced by the fix for 1035). Bugfix on 0.2.2.23-alpha.
Apparently something in the directory guard code made it possible
for the same node to get added as a guard over and over when there
were no actual running guard nodes.
Relays used to check every 10 to 60 seconds, as an accidental side effect
of calling directory_fetches_from_authorities() when considering doing
a directory fetch. The fix for bug 1992 removes that side effect. At the
same time, bridge relays never had the side effect, leading to confused
bridge operators who tried crazy tricks to get their bridges to notice
IP address changes (see ticket 1913).
The new behavior is to reinstate an every-60-seconds check for both
public relays and bridge relays, now that the side effect is gone.
For example, we were doing a resolve every time we think about doing a
directory fetch. Now we reuse the cached answer in some cases.
Fixes bugs 1992 (bugfix on 0.2.0.20-rc) and 2410 (bugfix on
0.1.2.2-alpha).
When we compute the estimated microseconds we need to handle our
pending onionskins, we could (in principle) overflow a uint32_t if
we ever had 4 million pending onionskins before we had any data
about how onionskins take. Nevertheless, let's compute it properly.
Fixes bug 8210; bugfix on 0.2.4.10. Found by coverity; this is CID
980651.
Coverity is worried that we're checking entry_conn in some cases,
but not in the case where we set entry_conn->pending_optimistic_data.
This commit should calm it down (CID 718623).
The refactoring in commit 471ab34032 wasn't complete enough: we
were checking the auth_len variable, but never actually setting it,
so it would never seem that authentication had been provided.
This commit also removes a bunch of unused variables from
rend_service_introduce, whose unusedness we hadn't noticed because
we were wiping them at the end of the function.
Fix for bug 8207; bugfix on 0.2.4.1-alpha.
It returns the method by which we decided our public IP address
(explicitly configured, resolved from explicit hostname, guessed from
interfaces, learned by gethostname).
Now we can provide more helpful log messages when a relay guesses its IP
address incorrectly (e.g. due to unexpected lines in /etc/hosts). Resolves
ticket 2267.
While we're at it, stop sending a stray "(null)" in some cases for the
server status "EXTERNAL_ADDRESS" controller event. Resolves bug 8200.
since router_parse_entry_from_string() already checks whether
!tor_inet_aton(router->address, &in)
(And no need to print address, since router_describe does that.)
- Document the key=value format.
- Constify equal_sign_pos.
- Pass some strings that are about to be logged to escape().
- Update documentation and fix some bugs in tor_escape_str_for_socks_arg().
- Use string_is_key_value() in parse_bridge_line().
- Parenthesize a forgotten #define
- Add some more comments.
- Add some more unit test cases.
This check isn't necessary (see comment on #7801), but it took at
least two smart people a little while to see why it wasn't necessary,
so let's have it in to make the code more readable.
We need a weak RNG in a couple of places where the strong RNG is
both needless and too slow. We had been using the weak RNG from our
platform's libc implementation, but that was problematic (because
many platforms have exceptionally horrible weak RNGs -- like, ones
that only return values between 0 and SHORT_MAX) and because we were
using it in a way that was wrong for LCG-based weak RNGs. (We were
counting on the low bits of the LCG output to be as random as the
high ones, which isn't true.)
This patch adds a separate type for a weak RNG, adds an LCG
implementation for it, and uses that exclusively where we had been
using the platform weak RNG.
If we're deciding on a node's bandwidth based on "Bandwidth="
declarations, clip it to "20" or to the maxunmeasuredbw parameter,
if it's voted on.
This adds a new consensus method.
This is "part A" of bug 2286
Authorities don't set is_possible_guard on node_t, so they were
never deciding that they could build enough paths. This is a quick
and dirty fix.
Bug not in any released version of Tor
These seem to have gotten conflicted out of existence while mike was
working on path bias stuff.
Thanks to sysrqb for collecting these in a handy patch.
Now we can specify to skip bridges that wouldn't be able to answer the
type of dir fetch we're launching.
It's still the responsibility of the rest of the code to prevent us from
launching a given dir fetch if we have no bridges that could handle it.
Now as we move into a future where most bridges can handle microdescs
we will generally find ourselves using them, rather than holding back
just because one of our bridges doesn't use them.
When we first implemented TLS, we assumed in conneciton_handle_write
that a TOR_TLS_WANT_WRITE from flush_buf_tls meant that nothing had
been written. But when we moved our buffers to a ring buffer
implementation back in 0.1.0.5-rc (!), we broke that invariant: it's
possible that some bytes have been written but nothing.
That's bad. It means that if we do a sequence of TLS writes that ends
with a WANTWRITE, we don't notice that we flushed any bytes, and we
don't (I think) decrement buckets.
Fixes bug 7708; bugfix on 0.1.0.5-rc
Also, deprecate the torrc options for the scaling values. It's unlikely anyone
but developers will ever tweak them, even if we provided a single ratio value.
This is meant to avoid conflict with the built-in log() function in
math.h. It resolves ticket 7599. First reported by dhill.
This was generated with the following perl script:
#!/usr/bin/perl -w -i -p
s/\blog\(LOG_(ERR|WARN|NOTICE|INFO|DEBUG)\s*,\s*/log_\L$1\(/g;
s/\blog\(/tor_log\(/g;
Instead of hardcoding the minimum fraction of possible paths to 0.6, we
take it from the user, and failing that from the consensus, and
failing that we fall back to 0.6.
Previously we did this based on the fraction of descriptors we
had. But really, we should be going based on what fraction of paths
we're able to build based on weighted bandwidth, since otherwise a
directory guard or two could make us behave quite oddly.
Implementation for feature 5956
If any circuits were opened during a scaling event, we were scaling attempts
and successes by different amounts. This leads to rounding error.
The fix is to record how many circuits are in a state that hasn't been fully
counted yet, and subtract that before scaling, and add it back afterwords.
Since they use RELAY_EARLY (which can be seen by all hops on the path),
it's not safe to say they actually count as a successful use.
There are also problems with trying to allow them to finish extending due to
the circuit purpose state machine logic. It is way less complicated (and
possibly more semantically coherent) to simply wait until we actually try to
do something with them before claiming we 'used' them.
Also, we shouldn't call timed out circuits 'used' either, for semantic
consistency.
An adversary could let the first stream request succeed (ie the resolve), but
then tag and timeout the remainder (via cell dropping), forcing them on new
circuits.
Rolling back the state will cause us to probe such circuits, which should lead
to probe failures in the event of such tagging due to either unrecognized
cells coming in while we wait for the probe, or the cipher state getting out
of sync in the case of dropped cells.
Path use bias measures how often we can actually succeed using the circuits we
actually try to use. It is a subset of path bias accounting, but it is
computed as a separate statistic because the rate of client circuit use may
vary depending on use case.
This is a minimal refactoring to expose the weighted bandwidth
calculations for each node so I can use them to see what fraction of
nodes, weighted by bandwidth, we have descriptors for.
This is ticket 7706, reported by "bugcatcher." The rationale here
is that if somebody says 'ExcludeNodes {tv}', then they probably
don't just want to block definitely Tuvaluan nodes: they also want
to block nodes that have unknown country, since for all they know
such nodes are also in Tuvalu.
This behavior is controlled by a new GeoIPExcludeUnknown autobool
option. With the default (auto) setting, we exclude ?? and A1 if
any country is excluded. If the option is 1, we add ?? and A1
unconditionally; if the option is 0, we never add them.
(Right now our geoip file doesn't actually seem to include A1: I'm
including it here in case it comes back.)
This feature only takes effect if you have a GeoIP file. Otherwise
you'd be excluding every node.
The implementation is pretty straightforward: parse_extended_hostname() is
modified to drop any leading components from an address like
'foo.aaaaaaaaaaaaaaaa.onion'.
This is an automatically generated commit, from the following perl script,
run with the options "-w -i -p".
s/smartlist_string_num_isin/smartlist_contains_int_as_string/g;
s/smartlist_string_isin((?:_case)?)/smartlist_contains_string$1/g;
s/smartlist_digest_isin/smartlist_contains_digest/g;
s/smartlist_isin/smartlist_contains/g;
s/digestset_isin/digestset_contains/g;
In 6fbdf635 we added a couple of statements like:
if (test) {
...
};
The extraneous semicolons there get flagged as worrisome empty
statements by the cparser library, so let's fix them.
Patch by Christian Grothoff; fixes bug 7115.
Otherwise, it's possible to create streams or circuits with these
bogus IDs, leading to orphaned circuits or streams, or to ones that
can cause bandwidth DOS problems.
Fixes bug 7889; bugfix on all released Tors.
In general, if we tried to use a circ for a stream, but then decided to place
that stream on a different circuit, we need to probe the original circuit
before deciding it was a "success".
We also need to do the same for cannibalized circuits that go unused.
This makes removing items from the middle of the queue into an O(1)
operation, which could prove important as we let onionqueues grow
longer.
Doing this actually makes the code slightly smaller, too.
The right way to set "MaxOnionsPending" was to adjust it until the
processing delay was appropriate. So instead, let's measure how long
it takes to process onionskins (sampling them once we have a big
number), and then limit the queue based on its expected time to
finish.
This change is extra-necessary for ntor, since there is no longer a
reasonable way to set MaxOnionsPending without knowing what mix of
onionskins you'll get.
This patch also reserves 1/3 of the onionskin spots for ntor
handshakes, on the theory that TAP handshakes shouldn't be allowed to
starve their speedier cousins. We can change this later if need be.
Resolves 7291.
The unit of work sent to a cpuworker is now a create_cell_t; its
response is now a created_cell_t. Several of the things that call or
get called by this chain of logic now take create_cell_t or
created_cell_t too.
Since all cpuworkers are forked or spawned by Tor, they don't need a
stable wire protocol, so we can just send structs. This saves us some
insanity, and helps p
As elsewhere, it makes sense when adding or extending a cell type to
actually make the code to parse it into a separate tested function.
This commit doesn't actually make anything use these new functions;
that's for a later commit.
The handshake_digest field was never meaningfully a digest *of* the
handshake, but rather is a digest *from* the handshake that we exapted
to prevent replays of ESTABLISH_INTRO cells. The ntor handshake will
generate it as more key material rather than taking it from any part
of the circuit handshake reply..
I'm going to want a generic "onionskin" type and set of wrappers, and
for that, it will be helpful to isolate the different circuit creation
handshakes. Now the original handshake is in onion_tap.[ch], the
CREATE_FAST handshake is in onion_fast.[ch], and onion.[ch] now
handles the onion queue.
This commit does nothing but move code and adjust header files.
Here we try to handle curve25519 onion keys from generating them,
loading and storing them, publishing them in our descriptors, putting
them in microdescriptors, and so on.
This commit is untested and probably buggy like whoa
This patch moves curve25519_keypair_t from src/or/onion_ntor.h to
src/common/crypto_curve25519.h, and adds new functions to generate,
load, and store keypairs.
The ntor handshake--described in proposal 216 and in a paper by
Goldberg, Stebila, and Ustaoglu--gets us much better performance than
our current approach.
Our old warn_nonlocal_client_ports() would give a bogus warning for
every nonlocal port every time it parsed any ports at all. So if it
parsed a nonlocal socksport, it would complain that it had a nonlocal
socksport...and then turn around and complain about the nonlocal
socksport again, calling it a nonlocal transport or nonlocal dnsport,
if it had any of those.
Fixes bug 7836; bugfix on 0.2.3.3-alpha.
mr-4 reports on #7799 that he was seeing it several times per second,
which suggests that things had gone very wrong.
This isn't a real fix, but it should make Tor usable till we can
figure out the real issue.
This implements the server-side of proposal 198 by detecting when
clients lack the magic list of ciphersuites that indicates that
they're lying faking some ciphers they don't really have. When
clients lack this list, we can choose any cipher that we'd actually
like. The newly allowed ciphersuites are, currently, "All ECDHE-RSA
ciphers that openssl supports, except for ECDHE-RSA-RC4".
The code to detect the cipher list relies on on (ab)use of
SSL_set_session_secret_cb.
It's important not to call choose_array_element_by_weight and then
pass its return value unchecked to smartlist_get : it is allowed to
return -1.
Fixes bug 7756; bugfix on 4e3d07a6 (not in any released Tor)
This is good enough to give P_success >= 999,999,999/1,000,000,000 so
long as the address space is less than 97.95 full. It'd be ridiculous
for that to happen for IPv6, and usome reasonable assumptions, it
would also be pretty silly for IPv4.
With an IPv6 virtual address map, we can basically hand out a new
IPv6 address for _every_ address we connect to. That'll be cool, and
will let us maybe get around prop205 issues.
This uses some fancy logic to try to make the code paths in the ipv4
and the ipv6 case as close as possible, and moves to randomly
generated addresses so we don't need to maintain those stupid counters
that will collide if Tor restarts but apps don't.
Also has some XXXX items to fix to make this useful. More design
needed.
This function gives us a single place to set reasonable default flags
for port_cfg_t entries, to avoid bugs like the one where we weren't
setting ipv4_traffic_ok to 1 on SocksPorts initialized in an older
way.
(This is part 2 of making DNS cache use enabled/disabled on a
per-client port basis. This implements the CacheIPv[46]DNS options,
but not the UseCachedIPv[46] ones.)
(This is part 1 of making DNS cache use enabled/disabled on a
per-client port basis. These options are shuffled around correctly,
but don't do anything yet.)
We want to be saying fast_mem{cmp,eq,neq} when we're doing a
comparison that's allowed to exit early, or tor_mem{cmp,eq,neq} when
we need a data-invariant timing. Direct use of memcmp tends to imply
that we haven't thought about the issue.
This has several advantages, including more resilience to ambient failure.
I still need to rename all the first_hop vars tho.. Saving that for a separate
commit.
Turns out there's more than one way to block a tagged circuit.
This seems to successfully handle all of the normal exit circuits. Hidden
services need additional tweaks, still.
This replaces the old FallbackConsensus notion, and should provide a
way -- assuming we pick reasonable nodes! -- to give clients
suggestions of placs to go to get their first consensus.
Now creating a dir_server_t and adding it are separate functions, and
there are frontend functions for adding a trusted dirserver and a
fallback dirserver.
We use trusted_dir_server_t for two pieces of functionality: a list of
all directory authorities, and a list of initial places to look for
a directory. With this patch we start to separate those two roles.
There is as of now no actual way to be a fallback directory without being
an authority.
This is a customizable extract-and-expand HMAC-KDF for deriving keys.
It derives from RFC5869, which derives its rationale from Krawczyk,
H., "Cryptographic Extraction and Key Derivation: The HKDF Scheme",
Proceedings of CRYPTO 2010, 2010, <http://eprint.iacr.org/2010/264>.
I'm also renaming the existing KDF, now that Tor has two of them.
This is the key derivation scheme specified in ntor.
There are also unit tests.
This one is necessary for sending BEGIN cells with sane flags when
self-testing a directory port. All real entry connections were
getting their ipv{4,6}_traffic_ok flags set from their listeners, and
for begindir entry connections we didn't care, but for directory
self-testing, we had a problem.
Fixes at least one more case of 7493; if there are more lingering
cases of 7493, this might fix them too.
Bug not in any released version of Tor.
Looks like when i was writing the code to set the ipv4_traffic flag on
port_cfg_t, I missed some cases, such as the one where the port was
set from its default value.
Fix for 7493. Bug not in any released Tor.
Previously, I was freaking out about passing an unspec address to
dns_found_answer() on an error, since I was using the address type to
determine whether the error was an error on an ipv4 address lookup or
on an ipv6 address lookup. But now dns_found_answer() has a separate
orig_query_type argument to tell what kind of query it is, so there's
no need to freak out.
* If there's an IPv4 and an IPv6 address, return both in the resolved
cell.
* Treat all resolve requests as permitting IPv6, since by the spec they're
allowed to, and by the code that won't break anything.
IPv4-only exits have an implicit "reject [::]/0", which was making
policy_is_reject_star() return 1 for them, making us refuse to do
hostname lookups.
This fix chanes policy_is_reject_star() to ask about which family we meant.
The code previously detected wildcarding and replaced wildcarded
answers with DNS_STATUS_FAILED_PERMANENT. But that status variable
was no longer used! Remove the status variable, and instead change
the value of 'result' in evdns_callback.
Thank goodness for compiler warnings. In this case,
unused-but-set-variable.
Thanks to Linus for finding this one.
Now, every cached_resolve_t can remember an IPv4 result *and* an IPv6
result. As a light protection against timing-based distinguishers for
IPv6 users (and against complexity!), every forward request generates
an IPv4 *and* an IPv6 request, assuming that we're an IPv6 exit. Once
we have answers or errors for both, we act accordingly.
This patch additionally makes some useful refactorings in the dns.c
code, though there is quite a bit more of useful refactoring that could
be done.
Additionally, have a new interface for the argument passed to the
evdns_callback function. Previously, it was just the original address
we were resolving. But it turns out that, on error, evdns doesn't
tell you the type of the query, so on a failure we didn't know whether
IPv4 or IPv6 queries were failing.
The new convention is to have the first byte of that argument include
the query type. I've refactored the code a bit to make that simpler.
This makes it so we can handle getting an IPv6 in the 3 different
formats we specified it for in RESOLVED cells,
END_STREAM_REASON_EXITPOLICY cells, and CONNECTED cells.
We don't cache IPv6 addresses yet, since proposal 205 isn't
implemented.
There's a refactored function for parsing connected cells; it has unit
tests.
These options are for telling the SOCKSPort that it should allow or
not allow connections to IPv4/IPv6 addresses.
These aren't implemented yet; this is just the code to read the
options and get them into the entrey_connection_t.
Also, count ipv6 timeouts vs others. If we have too many ipv6
requests time out, then we could be degrading performance because of a
broken DNS server that ignores AAAA requests. Other cases in which
we never learn an AAAA address aren't so bad, since they don't slow
A (ipv4) answers down very much.
This is a relatively simple set of changes: we mostly need to
remove a few "but not for IPv6" changes. We also needed to tweak
the handling of DNS code to generate RESOLVED cells that could get
an IPv6 answer in return.
Now, "accept *:80" means "accept all addresses on port 80", and not
just IPv4. For just v4, say "accept *4:80"; for just v6 say "accept
*6:80".
We can parse these policies from torrc just fine, and we should be
successfully keeping them out of descriptors for now.
We also now include appropriate IPv6 addresses in "reject private:*"
By default, "*" means "All IPv4 addresses" with
tor_addr_parse_mask_ports, so I won't break anything. But if the new
EXTENDED_STAR flag is provided, then * means "any address", *4 means
"any IPv4 address" (that is, 0.0.0.0/0), and "*6" means "any IPv6
address" (that is, [::]/0).
This is going to let us have a syntax for specifying exit policies in
torrc that won't drive people mad.
Also, add a bunch of unit tests for tor_addr_parse_mask_ports to test
these new features, and to increase coverage.
We'd like these functions to be circuit-relative so that we can
implement a per-circuit DNS cache and per-circuit DNS cache rules for
proposal 205 or its successors. I'm doing this now, as a part of the
IPv6 exits code, since there are about to be a few more instances
of code using this.
This is the simplest possible workaround: make it safe to call
circuit_cell_queue_clear() on a non-attached circuit, and make it
safe-but-a-LD_BUG-warning to call update_circuit_on_cmux() on a
non-attached circuit.
LocalWords: unstage src Untracked
Apparently some compilers like to eliminate memset() operations on
data that's about to go out-of-scope. I've gone with the safest
possible replacement, which might be a bit slow. I don't think this
is critical path in any way that will affect performance, but if it
is, we can work on that in 0.2.4.
Fixes bug 7352.
There is probably no code that can write the 2 bytes at the end of the
packed_cell_t when the cell is only a 512-byte cell, but let's not get
overconfident there.
Instead of warning about low ports that are advertised, we should have
been warning about low ports that we're listening on. Bug 7285, fix
on 0.2.3.9-alpha.
That's not where I'd want to put a $, but apparently the other
foo/id/<identity> things allow it, as does an arguably valid
interpretation of control-spec.txt. So let's be consistent.
Fix for a piece of bug 7059.
We still want to build on compilers w/o c99 support, such as
(notoriously, shamefully) MSVC.
So I'm commenting out the designated initializers in
circuitmux_ewma.c. The alternative would have been to use some kind
of macros to use designated initializers only when they're
supported, but that's error-prone, and can lead to code having
different meanings under different compilers.
Bug 7286; fix on 0.2.4.4-alpha; spotted by Gisle Vanem.
If we completed the handshake for the v2 link protocol but wound up
negotiating the wong protocol version, we'd become so confused about
what part of the handshake we were in that we'd promptly die with an
assertion.
This is a fix for CVE-2012-2250; it's a bugfix on 0.2.3.6-alpha.
All servers running that version or later should really upgrade.
Bug and fix from "some guy from France." I tweaked his code slightly
to make it log the IP of the offending node, and to forward-port it to
0.2.4.
If we completed the handshake for the v2 link protocol but wound up
negotiating the wong protocol version, we'd become so confused about
what part of the handshake we were in that we'd promptly die with an
assertion.
This is a fix for CVE-2012-2250; it's a bugfix on 0.2.3.6-alpha.
All servers running that version or later should really upgrade.
Bug and fix from "some guy from France." I tweaked his code slightly
to make it log the IP of the offending node.
Clients now consider the ClientRejectInternalAddresses config option
when using a microdescriptor consensus stanza to decide whether
an exit relay would allow exiting to an internal address. Fixes
bug 7190; bugfix on 0.2.3.1-alpha.
Our implementation of parse_short_policy was screwed up: it would
ignore the last character of every short policy. Obviously, that's
broken.
This patch fixes the busted behavior, and adds a bunch of unit tests
to make sure the rest of that function is okay.
Fixes bug 7192; fix on 0.2.3.1-alpha.
Conflicts:
src/or/circuitbuild.c
There was a huge-looking conflict in circuitbuild.c, but the only
change that had been made to circuitbuild.c since I forked off the
split_circuitbuild branch was 17442560c4. So I took the
split_circuitbuild version of the conflicting part, and manually
re-applied the change from 17442560c44e8093f9a..
Failure to do so left us open to a remotely triggerable assertion
failure. Fixes CVE-2012-2249; bugfix on 0.2.3.6-alpha. Reported by
"some guy from France".
This patch is a forward-port to 0.2.4, to work with the new channel
logic.
Failure to do so left us open to a remotely triggerable assertion
failure. Fixes CVE-2012-2249; bugfix on 0.2.3.6-alpha. Reported by
"some guy from France".
We were calling channel_get_actual_remote_descr() before we used the
output of a previous channel_get_canonical_remote_descr(), thus
invalidating its output.
When we merged the channel code, we made the 'address' field of linked
directory connections created with begindir (and their associated edge
connections) contain an address:port string, when they should only
have contained the address part.
This patch also tweaks the interface to the get_descr method of
channels so that it takes a set of flags rather than a single flag.
In 4768c0efe3 (not in any released
version of Tor), we removed a little block of code that set the addr
field of an exit connection used in making a tunneled directory
request. Turns out that wasn't right.
In C, we technically aren't supposed to define our own things that
start with an underscore.
This is a purely machine-generated commit. First, I ran this script
on all the headers in src/{common,or,test,tools/*}/*.h :
==============================
use strict;
my %macros = ();
my %skipped = ();
FILE: for my $fn (@ARGV) {
my $f = $fn;
if ($fn !~ /^\.\//) {
$f = "./$fn";
}
$skipped{$fn} = 0;
open(F, $fn);
while (<F>) {
if (/^#ifndef ([A-Za-z0-9_]+)/) {
$macros{$fn} = $1;
next FILE;
}
}
}
print "#!/usr/bin/perl -w -i -p\n\n";
for my $fn (@ARGV) {
if (! exists $macros{$fn}) {
print "# No macro known for $fn!\n" if (!$skipped{$fn});
next;
}
if ($macros{$fn} !~ /_H_?$/) {
print "# Weird macro for $fn...\n";
}
my $goodmacro = uc $fn;
$goodmacro =~ s#.*/##;
$goodmacro =~ s#[\/\-\.]#_#g;
print "s/(?<![A-Za-z0-9_])$macros{$fn}(?![A-Za-z0-9_])/TOR_${goodmacro}/g;\n"
}
==============================
It produced the following output, which I then re-ran on those same files:
==============================
s/(?<![A-Za-z0-9_])_TOR_ADDRESS_H(?![A-Za-z0-9_])/TOR_ADDRESS_H/g;
s/(?<![A-Za-z0-9_])_TOR_AES_H(?![A-Za-z0-9_])/TOR_AES_H/g;
s/(?<![A-Za-z0-9_])_TOR_COMPAT_H(?![A-Za-z0-9_])/TOR_COMPAT_H/g;
s/(?<![A-Za-z0-9_])_TOR_COMPAT_LIBEVENT_H(?![A-Za-z0-9_])/TOR_COMPAT_LIBEVENT_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONTAINER_H(?![A-Za-z0-9_])/TOR_CONTAINER_H/g;
s/(?<![A-Za-z0-9_])_TOR_CRYPTO_H(?![A-Za-z0-9_])/TOR_CRYPTO_H/g;
s/(?<![A-Za-z0-9_])TOR_DI_OPS_H(?![A-Za-z0-9_])/TOR_DI_OPS_H/g;
s/(?<![A-Za-z0-9_])_TOR_MEMAREA_H(?![A-Za-z0-9_])/TOR_MEMAREA_H/g;
s/(?<![A-Za-z0-9_])_TOR_MEMPOOL_H(?![A-Za-z0-9_])/TOR_MEMPOOL_H/g;
s/(?<![A-Za-z0-9_])TOR_PROCMON_H(?![A-Za-z0-9_])/TOR_PROCMON_H/g;
s/(?<![A-Za-z0-9_])_TOR_TORGZIP_H(?![A-Za-z0-9_])/TOR_TORGZIP_H/g;
s/(?<![A-Za-z0-9_])_TOR_TORINT_H(?![A-Za-z0-9_])/TOR_TORINT_H/g;
s/(?<![A-Za-z0-9_])_TOR_LOG_H(?![A-Za-z0-9_])/TOR_TORLOG_H/g;
s/(?<![A-Za-z0-9_])_TOR_TORTLS_H(?![A-Za-z0-9_])/TOR_TORTLS_H/g;
s/(?<![A-Za-z0-9_])_TOR_UTIL_H(?![A-Za-z0-9_])/TOR_UTIL_H/g;
s/(?<![A-Za-z0-9_])_TOR_BUFFERS_H(?![A-Za-z0-9_])/TOR_BUFFERS_H/g;
s/(?<![A-Za-z0-9_])_TOR_CHANNEL_H(?![A-Za-z0-9_])/TOR_CHANNEL_H/g;
s/(?<![A-Za-z0-9_])_TOR_CHANNEL_TLS_H(?![A-Za-z0-9_])/TOR_CHANNELTLS_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITBUILD_H(?![A-Za-z0-9_])/TOR_CIRCUITBUILD_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITLIST_H(?![A-Za-z0-9_])/TOR_CIRCUITLIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITMUX_EWMA_H(?![A-Za-z0-9_])/TOR_CIRCUITMUX_EWMA_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITMUX_H(?![A-Za-z0-9_])/TOR_CIRCUITMUX_H/g;
s/(?<![A-Za-z0-9_])_TOR_CIRCUITUSE_H(?![A-Za-z0-9_])/TOR_CIRCUITUSE_H/g;
s/(?<![A-Za-z0-9_])_TOR_COMMAND_H(?![A-Za-z0-9_])/TOR_COMMAND_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONFIG_H(?![A-Za-z0-9_])/TOR_CONFIG_H/g;
s/(?<![A-Za-z0-9_])TOR_CONFPARSE_H(?![A-Za-z0-9_])/TOR_CONFPARSE_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONNECTION_EDGE_H(?![A-Za-z0-9_])/TOR_CONNECTION_EDGE_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONNECTION_H(?![A-Za-z0-9_])/TOR_CONNECTION_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONNECTION_OR_H(?![A-Za-z0-9_])/TOR_CONNECTION_OR_H/g;
s/(?<![A-Za-z0-9_])_TOR_CONTROL_H(?![A-Za-z0-9_])/TOR_CONTROL_H/g;
s/(?<![A-Za-z0-9_])_TOR_CPUWORKER_H(?![A-Za-z0-9_])/TOR_CPUWORKER_H/g;
s/(?<![A-Za-z0-9_])_TOR_DIRECTORY_H(?![A-Za-z0-9_])/TOR_DIRECTORY_H/g;
s/(?<![A-Za-z0-9_])_TOR_DIRSERV_H(?![A-Za-z0-9_])/TOR_DIRSERV_H/g;
s/(?<![A-Za-z0-9_])_TOR_DIRVOTE_H(?![A-Za-z0-9_])/TOR_DIRVOTE_H/g;
s/(?<![A-Za-z0-9_])_TOR_DNS_H(?![A-Za-z0-9_])/TOR_DNS_H/g;
s/(?<![A-Za-z0-9_])_TOR_DNSSERV_H(?![A-Za-z0-9_])/TOR_DNSSERV_H/g;
s/(?<![A-Za-z0-9_])TOR_EVENTDNS_TOR_H(?![A-Za-z0-9_])/TOR_EVENTDNS_TOR_H/g;
s/(?<![A-Za-z0-9_])_TOR_GEOIP_H(?![A-Za-z0-9_])/TOR_GEOIP_H/g;
s/(?<![A-Za-z0-9_])_TOR_HIBERNATE_H(?![A-Za-z0-9_])/TOR_HIBERNATE_H/g;
s/(?<![A-Za-z0-9_])_TOR_MAIN_H(?![A-Za-z0-9_])/TOR_MAIN_H/g;
s/(?<![A-Za-z0-9_])_TOR_MICRODESC_H(?![A-Za-z0-9_])/TOR_MICRODESC_H/g;
s/(?<![A-Za-z0-9_])_TOR_NETWORKSTATUS_H(?![A-Za-z0-9_])/TOR_NETWORKSTATUS_H/g;
s/(?<![A-Za-z0-9_])_TOR_NODELIST_H(?![A-Za-z0-9_])/TOR_NODELIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_NTMAIN_H(?![A-Za-z0-9_])/TOR_NTMAIN_H/g;
s/(?<![A-Za-z0-9_])_TOR_ONION_H(?![A-Za-z0-9_])/TOR_ONION_H/g;
s/(?<![A-Za-z0-9_])_TOR_OR_H(?![A-Za-z0-9_])/TOR_OR_H/g;
s/(?<![A-Za-z0-9_])_TOR_POLICIES_H(?![A-Za-z0-9_])/TOR_POLICIES_H/g;
s/(?<![A-Za-z0-9_])_TOR_REASONS_H(?![A-Za-z0-9_])/TOR_REASONS_H/g;
s/(?<![A-Za-z0-9_])_TOR_RELAY_H(?![A-Za-z0-9_])/TOR_RELAY_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDCLIENT_H(?![A-Za-z0-9_])/TOR_RENDCLIENT_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDCOMMON_H(?![A-Za-z0-9_])/TOR_RENDCOMMON_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDMID_H(?![A-Za-z0-9_])/TOR_RENDMID_H/g;
s/(?<![A-Za-z0-9_])_TOR_RENDSERVICE_H(?![A-Za-z0-9_])/TOR_RENDSERVICE_H/g;
s/(?<![A-Za-z0-9_])_TOR_REPHIST_H(?![A-Za-z0-9_])/TOR_REPHIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_REPLAYCACHE_H(?![A-Za-z0-9_])/TOR_REPLAYCACHE_H/g;
s/(?<![A-Za-z0-9_])_TOR_ROUTER_H(?![A-Za-z0-9_])/TOR_ROUTER_H/g;
s/(?<![A-Za-z0-9_])_TOR_ROUTERLIST_H(?![A-Za-z0-9_])/TOR_ROUTERLIST_H/g;
s/(?<![A-Za-z0-9_])_TOR_ROUTERPARSE_H(?![A-Za-z0-9_])/TOR_ROUTERPARSE_H/g;
s/(?<![A-Za-z0-9_])TOR_ROUTERSET_H(?![A-Za-z0-9_])/TOR_ROUTERSET_H/g;
s/(?<![A-Za-z0-9_])TOR_STATEFILE_H(?![A-Za-z0-9_])/TOR_STATEFILE_H/g;
s/(?<![A-Za-z0-9_])_TOR_STATUS_H(?![A-Za-z0-9_])/TOR_STATUS_H/g;
s/(?<![A-Za-z0-9_])TOR_TRANSPORTS_H(?![A-Za-z0-9_])/TOR_TRANSPORTS_H/g;
s/(?<![A-Za-z0-9_])_TOR_TEST_H(?![A-Za-z0-9_])/TOR_TEST_H/g;
s/(?<![A-Za-z0-9_])_TOR_FW_HELPER_H(?![A-Za-z0-9_])/TOR_TOR_FW_HELPER_H/g;
s/(?<![A-Za-z0-9_])_TOR_FW_HELPER_NATPMP_H(?![A-Za-z0-9_])/TOR_TOR_FW_HELPER_NATPMP_H/g;
s/(?<![A-Za-z0-9_])_TOR_FW_HELPER_UPNP_H(?![A-Za-z0-9_])/TOR_TOR_FW_HELPER_UPNP_H/g;
==============================
The rationale for treating these files differently is that we should
be checking upstream for changes as applicable, and merging changes
upstream as warranted.
Conflicts:
src/or/circuitbuild.c
The conflict was trivial, since no line of code actually changed in
both branches: There was a fmt_addr() that turned into fmt_addrport()
in bug7011, and a "if (!n_conn)" that turned into "if (!n_chan)" in
master.
This is mostly a conversion from this pattern:
log("... %s:%d ...", fmt_and_decorate_addr(&addr), port);
to this:
log("... %s ...", fmt_addrport(&addr, port));
The output is the same in all cases.
Apparently BridgeDB is already expecting transport lines to be formatted
thus; see https://trac.torproject.org/projects/tor/ticket/7011#comment:12 ff.
It may be that there are no extant IPv6 pluggable transport bridges yet,
so this didn't cause a problem.
state_transport_line_is_valid calls tor_addr_port_lookup, which expects
brackets around an IPv6 address. Without this, cached transport
addresses can't be parsed later:
[warn] state: Could not parse addrport.
[warn] state: State file seems to be broken.
See #7011.
It's possible for connection_or_connect() to fail and return NULL after it
sets tlschan->conn, so not checking leaves a channel hanging around in
CHANNEL_STATE_OPENING with a pointer to a freed or_connection_t forever.
Note: this is a squashed commit; see branch bug6465_rebased_v2 of user/andrea/tor.git for full history of the following 2 commits:
Use channel_t in cpuworker.c
Fix bug in channel_t usage in cpuworker.c that was killing relaying on channel_t-ized Tor. The tags passed to the worker now have a channel ID, not a connection ID.
Note: this is a squashed commit; see branch bug6465_rebased_v2 of user/andrea/tor.git for full history of the following 10 commits:
Convert relay.c/relay.h to channel_t
Updating the timestamp if n_flushed > 0 at the end of channel_flush_from_first_active_circuit() was redundant since channel_write_cell() et al. do it themselves.
Get rid of now-unnecessary time parameter in channel_flush_from_first_active_circuit()
Get rid of now-unnecessary time parameter in channel_flush_from_first_active_circuit() in connection_or.c
Add non-inlined external call for channeltls.c to free a packed_cell_t
Appease make check-spaces in relay.c
Replace channel_get_write_queue_len() with sufficient and easier to implement channel_has_queued_writes() in relay.c
Rename channel_touched_by_client() and client_used field for consistency with other timestamps in relay.c
Don't double-free packed cells in relay.c (channel_t Tor now bootstraps and works as a client)
Rearrange channel_t struct to use a union distinguishing listener from cell-bearing channels in relay.c
Note: this is a squashed commit; see branch bug6465_rebased_v2 of user/andrea/tor.git for full history of the following 90 commits:
Add channel.c/channel.h for bug 6465
Fix make check-spaces in new channel.c/channel.h
Make sure new channel.h is in nodist_HEADERS and Makefile.nmake is up to date too
Add channel_state_t and state utility functions
Add channel_change_state()
Better comments in channel.h
Add CHANNEL_STATE_LISTENING for channel_t
Fix wide line in channel.c
Add structures/prototypes for incoming cell handling
Implement channel_queue_cell() and channel_queue_var_cell()
Implement channel_process_cells()
Fix asserts in channel_queue_cell() and channel_queue_var_cell()
Add descriptive comments for channel_queue_cell() and channel_queue_var_cell()
Implement channel cell handler getters/setters
Queue outgoing writes when not in writeable state
Drain queues and test assertions when changing channel_t state
Add log_debug() messages for channel_t stuff
Add log_debug() messages for channel_t stuff
Add some channel_t metadata
Add time_t client_used to channel_t
Add channel_touched_by_client()
Declare a few channel_t metadata queries we'll have to implement later for use by circuitbuild.c
Add next_circ_id/circ_id_type to channel_t for use by circuitbuild.c
Count n_circuits in channel_t
Channel timestamp calls
Add create timestamp for channel.h
Declare some new metadata queries on channel_t
Add get_real_remote_descr() prototype
Move active_circuits stuff to channel_t, some other or.h and channel.h changes
Make channel_t refcounted and use global lists of active channels
Update channel_request_close() and channel_change_state() for channel_t registration mechanism
Handle closing channels sensibly
Add global_identifier for channels, channel_init() internal use function
Add timestamp_last_added_nonpadding to channel_t
Better comments in channel_init()
Correctly handle next_circ_id in channel_init()
Correctly handle next_circ_id in channel_init() and even compile this time
Appease make check-spaces
Update timestamps when writing cells to channel_t
Add channel_flush_some_cells() to call channel_flush_from_first_active_circuit()
Add registered channel lookup functions
Get rid of client_used in or_connection_t; it's in channel_t now
Get rid of circ_id_type in or_connection_t; implement channel_set_circ_id_type()
Eliminate is_bad_for_new_circs in or_connection_t; implement getter/setter for it in channel_t
Eliminate next_circ_id in or_connection_t in favor of channel_t
Handle packed cells in channel_t for relay.c
Add channel_identity_map and related functions
Handle add/remove from channel identity map on state transitions
Implement channel_is_local() and channel_mark_local()
Implement channel_is_client() and channel_mark_client()
Implement channel_is_outgoing() and channel_mark_outgoing()
Eliminate declaration for redundant channel_nonopen_was_started_here()
Add channel timestamps
Add channel timestamps, fix some make-check-spaces complaints
Remove redundant channel_was_started_here() function and initiated_remotely bit
Rename channel_get_remote_descr()/channel_get_real_remote_descr() to something clearer in channel.h
Replace channel_get_write_queue_len() with sufficient and easier to implement channel_has_queued_writes() in channel.h
Change return type of channel_is_bad_for_new_circs() to int for consistency
Implement channel_has_queued_writes()
Rename channel_touched_by_client() and client_used field for consistency with other timestamps in channel.{c,h}
Implement channel_get_actual_remote_descr() and channel_get_canonical_remote_descr() in channel.{c,h}
Implement channel_matches_extend_info() in channel.{c,h}
Implement channel_get_for_extend() and channel_is_better() in channel.{c,h}
Make channel_is_better() public in channel.{c,h}
Implement channel_matches_target_addr_for_extend() in channel.{c,h}
Implement channel_is_canonical_is_reliable() in channel.{c,h}
Demoronize get_remote_descr() method prototype - what the hell was I thinking there?
Timestamp channels in the right places in channel.c
Add missing tor_assert() in channel.c
Check if the lower layer accepted a cell in channel_write_cell() et al. of channel.c
Implement channel_flush_cells() in channel.c (w00t, it builds at last)
Call channel_timestamp_drained() at the right places in channel.c
Implement channel_run_cleanup()
Support optional channel_get_remote_addr() method and use it for GeoIP in channel_do_open_actions()
Get rid of channel refcounting; it'll be too complicated to handle it properly with all the pointers from circuits to channels, and closing from channel_run_cleanup() will work okay just like with connections
Doxygenate channel.c
Appease make check-spaces in channel.c
Fix superfluous semicolons in channel.c
Add/remove channels from identity digest map in all the right places in channel.c
The cell queues on channel_t must be empty when going to a CLOSED or ERROR state
Appease make check-spaces in channel.c
Add channel_clear/set_identity_digest() and some better logging to channel.{c,h}
Fix better logging to channel.c
Avoid SIGSEGV testing for queue emptiness in channel_flush_some_cells_from_outgoing_queue()
Remove TODO about checking cell queue in channel_free(); no need for it
Appease make check-spaces in channel.c
Add channel_free_all() and support functions
Check nullness of active_circuit_pqueue in channel_free()
Fix SMARTLIST_FOREACH_END usage in channel_process_cells()
Rearrange channel_t struct to use a union distinguishing listener from cell-bearing channels in channel.{c,h}
They're typically redundant with the "Your computer is too slow"
messages. Fixes bug 7038; bugfix on 0.2.2.16-alpha.
(In retrospect, we should have fixed this bug back in ticket 1042.)
We used to never return an IPv6 address unless ClientUseIPv6 was
set. We should allow clients running with bridges use IPv6 OR ports
even without setting ClientUseIPv6. Configuring an IPv6 address in a
Bridge line should imply that.
Fixes th second part of #6757.
Look at the address family of the preferred OR port rather than the
node.ipv6_preferred flag since the logic has changed with new
ClientUseIPv6 config option.
Fixes ticket 6884.
Right-shifting negative values has implementation-defined behavior.
On all the platforms we work on right now, the behavior is to
sign-extend the input. That isn't what we wanted in
auth_type_val = (descriptor_cookie_tmp[16] >> 4) + 1;
Fix for 6861; bugfix on 0.2.1.5-alpha; reported pseudonymously.
The broken behavior didn't actually hurt anything, I think, since the
only way to get sign-extension to happen would be to have the top bit
of descriptor_cookie_tmp[16] set, which would make the value of
descriptor_cookie_tmp[16] >> 4 somewhere between 0b11111111 and
0b11111000 (that is, between -1 and -8). So auth_type_val would be
between -7 and 0. And the immediate next line does:
if (auth_type_val < 1 || auth_type_val > 2) {
So the incorrectly computed auth_type_val would be rejected as
invalid, just as a correctly computed auth_type_val would be.
Still, this stuff shouldn't sit around the codebase.
We were doing (1<<p) to generate a flag at position p, but we should
have been doing (U64_LITERAL(1)<<p).
Fixes bug 6861; bugfix on 0.2.0.3-alpha; reported pseudonymously.
Our flag voting code needs to handle unrecognized flags, so it stores
them in a 64-bit bitfield. But we never actually checked for too many
flags, so we were potentially doing stuff like U64_LITERAL(1)<<flagnum
with flagnum >= 64. That's undefined behavior.
Fix for bug 6833; bugfix on 0.2.0.1-alpha.
When I removed version_supports_begindir, I accidentally removed the
mechanism we had been using to make a directory cache self-test its
directory port. This caused bug 6815, which caused 6814 (both in
0.2.4.2-alpha).
To fix this bug, I'm replacing the "anonymized_connection" argument to
directory_initiate_command_* with an enumeration to say how indirectly
to connect to a directory server. (I don't want to reinstate the
"version_supports_begindir" argument as "begindir_ok" or anything --
these functions already take too many arguments.)
For safety, I made sure that passing 0 and 1 for 'indirection' gives
the same result as you would have gotten before -- just in case I
missed any 0s or 1s.
we can turn it into an autobool later if we have some way for it
to make a decision.
(patch possibly got lost when nickm merged #6770; or maybe nickm meant
for it to be this way. i'm not sure.)
Add handle_fw_helper_output(), a function responsible for parsing the
output of tor-fw-helper. Refactor tor_check_port_forwarding() and
run_scheduled_events() accordingly too.
We now issue warnings when we get control output from tor-fw-helper,
and we log the verbose output of tor-fw-helper in LOG_INFO.
Conflicts:
src/common/util.c
See #4771 for rationale.
Note that this patch does not take suggested changes in #4470 into
account and keeps treating AuthDirHasIPv6Connectivity as an
AUTOBOOL. Thus, bug fixes for that are included here as well.
This is a fix on master, unreleased as of now.
Also, make node_get_prim_orport() indicate in its return value whether
a valid OR port was copied or not.
Maybe we should make it legal to pass ap_out==NULL?
Also, do this only for clients, explicitly.
Also, give the flag a value every time we set consensus. We used to
touch it only when ClientPreferIPv6ORPort was set, which was wrong.
extend_info_from_node() used to use the primary OR port (i.e. IPv4)
unless the node had routerinfo. Now that we have IPv6 addresses in
microdescs we may want to use them.
Note that this patch changes using r->cache_info.identity_digest into
using node->identity. I count on these being well synchronised, or
things would break in other ways. Right?
Add ClientUseIPv6 and ClientPreferIPv6ORPort configuration options.
Use "preferred OR port" for all entry nodes, not only for bridges.
Mark bridges with "prefer IPv6 OR port" if an IPv6 address is
configured in Bridge line and ClientPreferIPv6ORPort is set.
Mark relays with "prefer IPv6 OR port" if an IPv6 address is found in
descriptor and ClientPreferIPv6ORPort is set.
Filter "preferred OR port" through the ClientUseIPv6 config option. We
might want to move this test to where actual connection is being set
up once we have a fall back mechanism in place.
Have only non-servers pick an IPv6 address for the first hop: We
don't want relays to connect over IPv6 yet. (IPv6 has never been used
for second or third hops.)
Implements ticket 5535.
Generate and store all supported microdescriptor formats. Generate
votes with one "m" line for each format. Only "m" lines with version
info matching chosen consensus method will be voted upon.
An optimisation would be to combine "m" lines with identical hashes,
i.e. instead of "m 1,2,3 H1" and "m 4,5 H1", say "m 1,2,3,4,5 H1".
Define new new consensus method 14 adding "a" lines to vote and
consensus documents.
From proposal 186:
As with other data in the vote derived from the descriptor, the
consensus will include whichever set of "a" lines are given by the
most authorities who voted for the descriptor digest that will be
used for the router.
This patch implements this.
Allow one-hop directory fetching circuits the full "circuit build timeout"
period, rather than just half of it, before failing them and marking
the relay down. This fix should help reduce cases where clients declare
relays (or worse, bridges) unreachable because the TLS handshake takes
a few seconds to complete.
Fixes bug 6743 (one piece of bug 3443); bugfix on 0.2.2.2-alpha, where
we changed the timeout from a static 30 seconds.
We've had over two months to fix them, and didn't. Now we need
0.2.3.x stable. Yes, it would be cool to get this working in
0.2.3.x, but not at the expense of delaying every other feature that
_does_ work in 0.2.3.x. We can do a real fix in 0.2.4.
This is important, since otherwise an attacker can use timing info
to probe the internal network.
Also, add an option (ExtendAllowPrivateAddresses) so that
TestingTorNetwork won't break.
Fix for bug 6710; bugfix on all released versions of Tor.
Move extend_info_from_router() from circuitbuild.c to router.c and
make it static.
Add get_configured_bridge_by_orports_digest() and have
get_configured_bridge_by_routerinfo() and
node_is_a_configured_bridge() use it. We now consider all OR ports of
a bridge when looking for it.
Move node_get_*_orport to nodelist.c.
Fix a cut'n'paste error in header of nodelist.h.
Add node_assert_ok().
Add router_get_all_orports(). It's duplicating code from
node_get_all_orports(). Worth fixing at the cost of complicating the
API slightly?
There was some code in the "err:" block that would always log a
warning, reporting an "unknown error" if we hadn't set err_msg. But
there were also plenty of "goto err" blocks that did their own
logging, and never set err_msg at all. Now we should only log when
we have an error message to log.
This fixes bug 6638, from no released Tor version.
Failure to do this would lead to double-free cases and similar,
especially when the exit's DNS was broken. See bug 6472 for full
details; this is a fix for 6472.
Anonymous patch from "cypherpunks" on trac.
Long ago, before we had cell queues, it was necessary to maybe call
connection_handle_write() from connectino_write_to_buf_impl() on OR
connections, so that we wouldn't get into a loop of reading infinite
amounts of data and queueing it all on an outbuf before bothering to
write any data.
If that doesn't sounds like what our code does now, you're right:
right now, we won't stick more than OR_CONN_HIGHWATER bytes of cells
on an outbuf, and we won't suck more than CELL_QUEUE_HIGHWATER_SIZE
cells off any edge connection. So, there's no more call for that
code.
Removing this code will simplify our data flow, and that should be
something we can all get behind.
This is done to avoid spurious warns. Additional log lines are also
added to try to track down the codepaths where we are somehow overcounting
success counts.
This patch extracts the inner part of config_register_addressmaps --
the part that knows about detecting wildcard addresses addresses --
and makes it into a new function. The new function is deliberately
not moved or reindented, so that the diff is smaller.
I need this to fix bug 6244.
Extend cells aren't allowed to have a stream_id, but we were only
blocking them when they had a stream_id that corresponded to a
connection. As far as I can tell, this change is harmless: it will
make some kinds of broken clients not work any more, but afaik nobody
actually make a client that was broken in that way.
Found while hunting for other places where we made the same mistake
as in 6271.
Bugfix on d7f50337c1 back from May 2003, which introduced
telescoping circuit construction into 0.0.2pre8.
Thanks to the changes we started making with SocksPort and friends
in 0.2.3.3-alpha, any of our code that did "if (options->Sockport)"
became wrong, since "SocksPort 0" would make that test true whereas
using the default SocksPort value would make it false. (We didn't
actually do "if (options->SockPort)" but we did have tests for
TransPort. When we moved DirPort, ORPort, and ControlPort over to
the same system in 0.2.3.9-alpha, the problem got worse, since our
code is littered with checks for DirPort and ORPort as booleans.
This code renames the current linelist-based FooPort options to
FooPort_lines, and adds new FooPort_set options which get set at
parse-and-validate time on the or_options_t. FooPort_set is true
iff we will actually try to open a listener of the given type. (I
renamed the FooPort options rather than leave them alone so that
every previous user of a FooPort would need to get inspected, and so
that any new code that forgetfully uses FooPort will need fail to
compile.)
Fix for bug 6507.
With this patch, I dump the old kludge of using magic negative
numbers to indicate unknown bandwidths. I also compute each node's
weighted bandwidth exactly once, rather than computing it once in
a loop to compute the total weighted bandwidth and a second time in
a loop to find which one we picked.
Previously, we had incremented rand_bw so that when we later tested
"tmp >= rand_bw", we wouldn't have an off-by-one error. But instead,
it makes more sense to leave rand_bw alone and test "tmp > rand_bw".
Note that this is still safe. To take the example from the bug1203
writeup: Suppose that we have 3 nodes with bandwidth 1. So the
bandwidth array is { 1, 1, 1 }, and the total bandwidth is 3. We
choose rand_bw == 0, 1, or 2. With the first iteration of the loop,
tmp is now 1; with the second, tmp is 2; with the third, tmp is 3.
Now that our check is tmp > rand_bw, we will set i in the first
iteration of the loop iff rand_bw == 0; in the second iteration of
the loop iff rand_bw == 1, and in the third iff rand_bw == 2.
That's what we want.
Incidentally, this change makes the bug 6538 fix more ironclad: once
rand_bw is set to UINT64_MAX, tmp > rand_bw is obviously false
regardless of the value of tmp.
The old approach, because of its "tmp >= rand_bw &&
!i_has_been_chosen" check, would run through the second part of the
loop slightly slower than the first part. Now, we remove
i_has_been_chosen, and instead set rand_bw = UINT64_MAX, so that
every instance of the loop will do exactly the same amount of work
regardless of the initial value of rand_bw.
Fix for bug 6538.
This should make our preferred solution to #6538 easier to
implement, avoid a bunch of potential nastiness with excessive
int-vs-double math, and generally make the code there a little less
scary.
"But wait!" you say. "Is it really safe to do this? Won't the
results come out differently?"
Yes, but not much. We now round every weighted bandwidth to the
nearest byte before computing on it. This will make every node that
had a fractional part of its weighted bandwidth before either
slighty more likely or slightly less likely. Further, the rand_bw
value was only ever set with integer precision, so it can't
accurately sample routers with tiny fractional bandwidth values
anyway. Finally, doing repeated double-vs-uint64 comparisons is
just plain sad; it will involve an implicit cast to double, which is
never a fun thing.
This gives us a few benefits:
1) make -j clean all
this will start working, as it should. It currently doesn't.
2) increased parallel build
recursive make will max out at number of files in a directory,
non-recursive make doesn't have such a limitation
3) Removal of duplicate information in make files,
less error prone
I've also slightly updated how we call AM_INIT_AUTOMAKE, as the way
that was used was not only deprecated but will be *removed* in the next
major automake release (1.13).... so probably best that we can continue
to bulid tor without requiring old automake.
(see http://www.gnu.org/software/automake/manual/html_node/Public-Macros.html )
For more reasons why, see resources such as:
http://miller.emu.id.au/pmiller/books/rmch/
In 0.2.3.18-rc, we started warning on this case while building a
list of missing microdescriptor digests. That turned out to spam
the logs; instead let's warn at parse time.
Partial fix for bug 6404.
The spec requires that every router in a microdesc consensus have an
m line; we weren't obeying that spec.
This creates a new consensus method (13) to allow voting to continue
to work right. Partial fix for bug 6404; fix on 0.2.2.6-alpha.
Test for config option AuthDirPublishIPv6 == 1 rather than for running
as a bridge authority when deciding whether to care or not about IPv6
OR ports in descriptors.
Implements enhancement #6406.
We can end up in dirserv_orconn_tls_done() with a node missing
routerinfo in at least two cases -- command_process_certs_cell() and
connection_or_check_valid_tls_handshake() -- and probably more.
You can say "struct foo_t" as much as you want, but you'd better not
have "typedef struct foo_t foo_t" more than once.
Fix for bug 6416. Bug not in any released version of Tor.
This avoids a possible crash bug in flush_from_first_active_circuit.
Fixes bug 6341; bugfix on 0.2.2.7-alpha.
Bug reported and fixed by a pseudonymous user on IRC.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
The SMARTLIST_FOREACH macro is more convenient than BEGIN/END when
you have a nice short loop body, but using it for long bodies makes
your preprocessor tell the compiler that all the code is on the same
line. That causes grief, since compiler warnings and debugger lines
will all refer to that one line.
So, here's a new style rule: SMARTLIST_FOREACH blocks need to be
short.
- Add a changes/ file.
- Make it compile under --enable-gcc-warnings.
- Update the file-level documentation of src/or/transports.c.
- Only update descriptor if at least a managed proxy was configured.
- Add our external IP address to the extra-info descriptor instead of 0.0.0.0.
This could result in bizarre window values. Report and patch
contributed pseudymously. Fixes part of bug 6271. This bug was
introduced before the first Tor release, in svn commit r152.
(bug 6271, part a.)
This reverts commit c32ec9c425.
It turns out the two sides of the circuit don't actually stay in sync,
so it is perfectly normal for the circuit window on the exit relay to
grow to 2000+. We should fix that bug and then reconsider this patch.
I only check on circuits, not streams, since bloating your stream
window past the initial circuit window can't help you much.
Also, I compare to CIRCWINDOW_START_MAX so we don't have surprising
races if we lower CIRCWINDOW_START for an experiment.
We were doing a tor_strclear() on client_keys_str when it might not
even be set.
Fix for bug 6255; bug not in any release of Tor. Thanks to katmagic
for finding this one!
The functions parse_{s,c}method_line() were using
tor_addr_port_lookup() which is capable of doing DNS lookups. DNS
lookups should not be necessary when parsing {C,S}METHOD lines.
We now catch bare {s that should be on the previous line with a do,
while, if, or for, and elses that should share a line with their
preceding }.
That is,
if (foo)
{
and
if (foo) {
...
}
else
are now detected.
We should think about maybe making Tor uncrustify-clean some day,
but configuring uncrustify is an exercise in bizarreness, and
reformatting huge gobs of Tor is always painful.
The code that detected the source of a remapped address checked that
an address mapping's source was a given rewrite rule if addr_orig had
no .exit, and addr did have a .exit after processing that rule. But
addr_orig was formatted for logging: it was not the original address
at all, but rather was the address escaped for logging and possibly
replaced with "[scrubbed]".
This new logic will correctly set ADDRMAPSRC_NONE in the case when the
address starts life as a .exit address, so that AllowDotExit can work
again.
Fixes bug 6211; bugfix on 0.2.3.17-beta
It turns out this can happen. Even though there is no reason for
connections to be marked but reading, we leave them reading anyway,
so warning here is unwarranted. Let's turn that back on once we do
something sensible and disable reading when we mark. Bugfix for
6203 on Tor 0.2.3.17-beta.
Thanks to cypherpunks for pointing out the general stupidity of the
original code here.
Now it's an orthodox "goto err/done" exit path, and it isn't some
screwy thing where we stick err/done at the end of a loop and
duplicate our cleanup code.
Previously, a directory would check the latest NS consensus for
having the signatures the client wanted, and use that consensus's
valid_until time to set the HTTP lifetime. With this patch, the
directory looks at NS consensus or the microdesc consensus,
depending on what the client asked for.
I saw 72% on a test run with 26 circuits. 70% might be a little close to the
line. That, or min_circs is too low and we need to be more patient. We still
need to test/simulate more.
The defense counts the circuit failure rate for each guard for the past N
circuits. Failure is defined as the ability to complete a first hop, but not
finish completing the circuit all the way to the exit.
If the failure rate exceeds a certain amount, a notice is emitted.
If it exceeds a greater amount, a warn is emitted and the guard is disabled.
These values are governed by consensus parameters which we intend to tune as
we perform experiments and statistical simulations.
The warning message of validate_pluggable_transports_config() is
superseded by the changes in the warning message of
connection_or_connect() when the proxy credentials can't be found.
There is a bug causing busy loops in Libevent and infinite loops in
the Shadow simulator. A connection that is marked for close, wants
to flush, is held open to flush, but is rate limited (the token
bucket is empty) triggers the bug.
This commit fixes the bug. Details are below.
This currently happens on read and write callbacks when the active
socket is marked for close. In this case, Tor doesn't actually try
to complete the read or write (it returns from those methods when
marked), but instead tries to clear the connection with
conn_close_if_marked(). Tor will not close a marked connection that
contains data: it must be flushed first. The bug occurs when this
flush operation on the marked connection can not occur because the
connection is rate-limited (its write token bucket is empty).
The fix is to detect when rate limiting is preventing a marked
connection from properly flushing. In this case, it should be
flagged as read/write_blocked_on_bandwidth and the read/write events
de-registered from Libevent. When the token bucket gets refilled, it
will check the associated read/write_blocked_on_bandwidth flag, and
add the read/write event back to Libevent, which will cause it to
fire. This time, it will be properly flushed and closed.
The reason that both read and write events are both de-registered
when the marked connection can not flush is because both result in
the same behavior. Both read/write events on marked connections will
never again do any actual reads/writes, and are only useful to
trigger the flush and close the connection. By setting the
associated read/write_blocked_on_bandwidth flag, we ensure that the
event will get added back to Libevent, properly flushed, and closed.
Why is this important? Every Shadow event occurs at a discrete time
instant. If Tor does not properly deregister Libevent events that
fire but result in Tor essentially doing nothing, Libevent will
repeatedly fire the event. In Shadow this means infinite loop,
outside of Shadow this means wasted CPU cycles.
From what I can tell, this configuration is usually a mistake, and
leads people to think that all their traffic is getting proxied when
in fact practically none of it is. Resolves the issue behind "bug"
4663.
The function is not guaranteed to NUL-terminate its output. It
*is*, however, guaranteed not to generate more than two bytes per
multibyte character (plus terminating nul), so the general approach
I'm taking is to try to allocate enough space, AND to manually add a
NUL at the end of each buffer just in case I screwed up the "enough
space" thing.
Fixes bug 5909.
This feature can make Tor relays less identifiable by their use of the
mod_ssl DH group, but at the cost of some usability (#4721) and bridge
tracing (#6087) regressions.
We should try to turn this on by default again if we find that the
mod_ssl group is uncommon and/or we move to a different DH group size
(see #6088). Before we can do so, we need a fix for bugs #6087 and
Resolves ticket #5598 for now.
These stats are currently discarded, but we might as well
hard-disable them on bridges, to be clean.
Fix for bug 5824; bugfix on 0.2.1.17-rc.
Patch originally by Karsten Loesing.
Also, try to resolve some doxygen issues. First, define a magic
"This is doxygen!" macro so that we take the correct branch in
various #if/#else/#endifs in order to get the right documentation.
Second, add in a few grouping @{ and @} entries in order to get some
variables and fields to get grouped together.
This code shouldn't have any effect in 0.2.3, since we already accept
(and handle) data received while we are expecting a renegotiation.
(That's because the 0.2.3.x handshake _does_ have data there instead of
the renegotiation.)
I'm leaving it in anyway, since if it breaks anything, we'll want it
broken in master too so we can find out about it. I added an XXX023
comment so that we can come back later and fix that.
This fixes a DoS issue where a client could send so much data in 5
minutes that they exhausted the server's RAM. Fix for bug 5934 and
6007. Bugfix on 0.2.0.20-rc, which enabled the v2 handshake.
This solves bug 5283, where client traffic could get sent over the
same circuit as an anonymized connection to a directory, even if
that circuit used an exit node unsuitable for clients. By marking
the directory connection as needs_internal, we ensure that the
(non-internal!) client-traffic connection won't be sent over the
same circuit.
On Windows, getsockname() on a nonblocking apparently won't work
until the connection is done connecting. On XP, it seems to fail by
reporting success and declaring that your address is INADDR_ANY. On the
Win8 preview, though, it fails more loudly and says WSAEINVAL.
Fix for bug 5374; bugfix on 0.1.1.14-alpha.
Roger explains at
http://archives.seul.org/tor/talk/Nov-2011/msg00209.html :
"If you list your bridge as part of your family in the relay
descriptor, then everybody can learn your bridge fingerprint, and
they can look up your bridge's descriptor (and thus location) at
the bridge directory authority."
Now, we can't stop relays from listing bridges, but we can warn when
we notice a bridge listing anybody, which might help some.
This fixes bug 4657; it's a fix on 0.2.0.3-alpha, where bridges were
first introduced.
To hit this leak, you need to be a relay that gets a RESOLVE request
or an exit node getting a BEGIN or RESOLVE request. You must either
have unconfigured (and unconfigurable) nameservers, or you must have
somehow set DisableNetwork after a network request arrived but
before you managed to process it.
So, I doubt this is reached often. Still, a leak's a leak. Fix for
bug 5916; bugfix on 0.2.3.9-alpha and 0.1.2.1-alpha.
%f is correct; %lf is only needed with scanf. Apparently, on some
old BSDs, %lf is deprecated.
Didn't we do this before? Yes, we did. But we only got the
instances of %lf, not more complicated things like %.5lf . This
patch tries to get everything.
Based on a patch for 3894 by grarpamp.
These errors usually mean address exhaustion; reporting them as such
lets clients adjust their load to try other exits.
Fix for bug 4710; bugfix on 0.1.0.1-rc, which started using
END_STREAM_REASON_RESOURCELIMIT.
Silences the log message:
[warn] {BUG} _connection_mark_unattached_ap(): Bug: stream (marked at connection_edge.c:2224) sending two socks replies?
after the client triggered the "Tor is not an HTTP Proxy" response.
No additional socks reply was sent, though.
Previously, we only did this check at startup, which could lead to
us holding a guard indefinitely, and give weird results. Fixes bug
5380; bugfix on 0.2.1.14-rc.
(Patch by Roger; changes file and commit message by Nick)
Previously, we skipped everything that got invoked from
options_init_from_torrc. But some of the stuff in
options_act_reversible and options_act is actually important, like
reopening the logs.
Now, a SIGHUP always makes the effects of an options_set() happen,
even though the options haven't changed.
Fix for bug 5095; bugfix on 0.2.1.9-alpha, which introduced
__ReloadTorrcOnSIGHUP.
This would happen if the deliver window could become negative
because of an nonexistent connection. (Fortunately, _that_ can't
occur, thanks to circuit_consider_sending_sendme. Still, if we
change our windowing logic at all, we won't want this to become
triggerable.) Fix for bug 5541. Bugfix on 4a66865d, back from
0.0.2pre14. asn found this. Nice catch, asn!
This tells the windows headers to give us definitions that didn't
exist before XP -- like the ones that we need for IPv6 support.
See bug #5861. We didn't run into this issue with mingw, since
mingw doesn't respect _WIN32_WINNT as well as it should for some of
its definitions.
MSVC warns if you declare a function as having a "int foo" argument
and then implement it with a "const int foo" argument, even though
the latter "const" is not a part of the function's interface.
Instead, allow packagers to put a 'TOR_BUILD_TAG' field in the
server descriptor to indicate a platform-specific value, if they
need to. (According to weasel, this was his use for the git- tag
previously.)
This is part of 2988
This time, I follow grarpamp's suggestion and move the check for
.exit+AllowDotExit 0 to the top of connection_ap_rewrite_and_attach,
before any rewriting occurs. This way, .exit addresses are
forbidden as they arrive from a socks connection or a DNSPort
request, and not otherwise.
It _is_ a little more complicated than that, though. We need to
treat any .exit addresses whose source is TrackHostExits as meaning
that we can retry without that exit. We also need to treat any
.exit address that comes from an AutomapHostsOnResolve operation as
user-provided (and thus forbidden if AllowDotExits==0), so that
transitioning from AllowDotExits==1 to AllowDotExits==0 will
actually turn off automapped .exit addresses.
This patch changes the total serverdesc threshold from 25% to 75%
and the exit threshold from 33% to 50%. The goal is to make
initially constructed circuits less horrible, and to make initial
less awful (since fetching directory information in parallel with
whatever the user is trying to do can hurt their performance).
Implements ticket 3196.
We were doing an O(n) strlen in router_get_extrainfo_hash() for
every one we tried to parse. Instead, have
router_get_extrainfo_hash() take the length of the extrainfo as an
argument, so that when it's called from
extrainfo_parse_from_string(), it doesn't do a strlen() over the
whole pile of extrainfos.
If the authorities agreed on a sufficiently bad bwweightscale value
(<=0 or == INT32_MAX), the bandwidth algorithm could make the voters
assert while computing the consensus.
Fix for bug5786; bugfix on 0.2.2.17-alpha
This is how IPv6 says "0.0.0.0" and something we will have to
translate into a globally reachable address before putting it in a
descriptor.
The fix is a short term solution until a real one is implemented.
Closes#5146.
Fixes bug #4528 "read_to_buf_tls(): Inconsistency in code".
This check was added back in 0.1.0.3-rc, but somehow we forgot to
leave it in when we refactored read_to_buf_tls in 0.1.0.5-rc.
(patch by Arturo; commit message and changes file by nickm)
Instead of checking for 'rejected' and calling everything else okay,
let's check for 'outdated' and call everythign else a problem. This
way we don't risk missing future errors so much.
When logging a message that _looks_ like an error message at info, we
should mention that it isn't really a problem.
Previously, we would reset it at the drop of a hat -- every time a second
passes without any of the intro-point circs already launched for the
service failing.
Fixes bug 4607.
In general, whenever we can, we should be doing
base64_decode(buf, sizeof(buf), s, strlen(s)),
and not
base_64_decode(buf, expr1, s, expr2)
where we hope that expr1 is a good name for the size of buf and expr2
is a good formula for the length of the base64 expression in s.
* Document fmt_addr_impl() and friends.
* Parenthesize macro arguments.
* Rename get_first_listener_addrport_for_pt() to
get_first_listener_addrport_string().
* Handle port_cfg_t with no_listen.
* Handle failure of router_get_active_listener_port_by_type().
* Add an XXX to router_get_active_listener_port_by_type().
This is just refactoring work here. The old logic was kind of
convoluted, especially after the bug 5572 fix. We don't actually need to
distinguish so many cases here. Dropping detection of the
"!old_options || !old_options->DynamicDHGroups" case is fine because
that's the same that we'd do for clients.
Also add a changes file for bug 5572.
The message only means that we're publishing a new descriptor when we
are actually in some kind of server mode, and publication is on.
Fix for bug 3942; bugfix on 0.2.3.2-alpha.
This fixes a side-channel attack on the (fortunately unused!)
BridgePassword option for bridge authorities. Fix for bug 5543;
bugfix on 0.2.0.14-alpha.
Introduce get_first_listener_addrport_for_pt() which returns a string
containing the addrport of the first listener we could find. Use it to
form the TOR_PT_ORPORT managed proxy protocol line.
This is ticket 2479. Roger's original explanation was:
We have a series of bugs where relays publish a descriptor within
12 hours of their last descriptor, but the authorities drop it
because it's not different "enough" from the last one and it's
too close to the last one.
The original goal of this idea was to a) reduce the number of new
descriptors authorities accept (and thus have to store) and b)
reduce the total number of descriptors that clients and mirrors
fetch. It's a defense against bugs where relays publish a new
descriptor every minute.
Now that we're putting out one consensus per hour, we're doing
better at the total damage that can be caused by 'b'.
There are broader-scale design changes that would help here, and
we've had a trac entry open for years about how relays should
recognize that they're not in the consensus, or recognize when
their publish failed, and republish sooner.
In the mean time, I think we should change some of the parameters
to make the problem less painful.
When we started RefuseUnknownExits back in 0.2.2.11-alpha, we
started making exits act like they cache directory info (since they
need an up-to-date idea of who is really a router). But this
included fetching needless (unrecognized) authorities' certs, which
doesn't make any sense for them.
This is related to, but not necessarily the same as, the issue that
Ian reported for bug #2297.
(This patch is based on a patch from a user who I believe has asked
not to be named. If I'm wrong about that, please add the
appropriate name onto the changelog.)
A previous commit in the 5527 branch had moved
router_get_mutable_by_digest(digest_rcvd) to happen before we did
tor_assert(digest_rcvd), which would have defeated the purpose of
the assert.
Specifically, I believe it dates back to when extend cells had address:port
but no digest in them. The special edge case is certainly not worth the
complexity these days.
This mitigates an attack proposed by wanoskarnet, in which all of a
client's bridges collude to restrict the exit nodes that the client
knows about. Fixes bug 5343.
In the distant past, connection_handle_read() could be called when there
are pending bytes in the TLS object during the main loop. The design
since then has been to always read all pending bytes immediately, so
read events only trigger when the socket actually has bytes to read.
Resolves bug 5324.
The invariant is: unconfigured_proxies_n is exactly the number of
managed_proxy_t not in state PT_PROTO_COMPLETED.
To maintain this, we need to stop overloading unconfigured_proxies_n
to also count managed_proxy_t items that are in PT_PROTO_COMPLETED but
which might need relaunching. To make it so we can detect those, we
introduce another variable.
This commit also adds a function to assert that we haven't broken the
invariant.
Fix for bug 5084; bugfix on 0.2.3.6-alpha, I think.
In some cases, we solve this by doing a SMARTLIST_DEL_CURRENT before
calling managed_proxy_destroy. But for a trickier one, we just make a
copy of the list before iterating over it, so that changes to the
manage proxy list don't hurt our iteration.
This could be related to bug 5084.
in Makefile.am, we used it without quoting it, causing build failure if
your openssl/sed/sha1sum happened to live in a directory with a space in
it (very common on windows)
If we don't do this, [::] can be interpreted to mean all v4 and all
v6 addresses. Found by dcf. Fixes bug 4760. See RFC 3493 section
5.3 for more info.
There was one MS_WINDOWS that remained because it wasn't on a macro
line; a few remaining uses (and the definition!) in configure.in;
and a now-nonsensical stanza of eventdns_tor.h that previously
defined 'WIN32' if it didn't exist.
This commit is completely mechanical; I used this perl script to make it:
#!/usr/bin/perl -w -i.bak -p
if (/^\s*\#/) {
s/MS_WINDOWS/_WIN32/g;
s/\bWIN32\b/_WIN32/g;
}
Previously the client would ask the bridge for microdescriptors, which are
only supported in 0.2.3.x and later, and then fail to bootstrap when it
didn't get the answers it wanted. Fixes bug 4013; bugfix on 0.2.3.2-alpha.
The fix here is to revert to using normal descriptors if any of our
bridges are known to not support microdescs. This is not ideal, a) because
we'll start downloading a microdesc consensus as soon as we get a bridge
descriptor, and that will waste time if we later get a bridge descriptor
that tells us we don't like microdescriptors; and b) by changing our mind
we're leaking to our other bridges that we have an old-version bridge.
The alternate fix would have been to change
we_use_microdescriptors_for_circuits() to ask if *any* of our bridges
can support microdescriptors, and then change the directory logic that
picks a bridge to only select from those that do. For people living in
the future, where 0.2.2.x is obsolete, there won't be a difference.
Note that in either of these potential fixes, we have risk of oscillation
if our one funny-looking bridges goes away / comes back.
These were found by looking for tor_snprintf() instances that were
preceeded closely by tor_malloc(), though I probably converted some
more snprintfs as well.
(In every case, make sure that the length variable (if any) is
removed, renamed, or lowered, so that anything else that might have
assumed a longer buffer doesn't exist.)
These were found by looking for tor_snprintf() instances that were
followed closely by tor_strdup(), though I probably converted some
other snprintfs as well.
(To ensure correctness, in every case, make sure that the temporary
variable is deleted, renamed, or lowered in scope, so we can't have
any bugs related to accidentally relying on the no-longer-filled
variable.)
Fixes bug #4897, not yet in any release.
Using n_circ_id alone here (and below, when n_conn is NULL) really sucks,
but that's a separate bug which will need a changes/ file.
When we have an effective bandwidthrate configured so that we cannot
exceed our bandwidth limit in one accounting interval, don't disable
advertising the dirport. Implements ticket 2434.
We used to do this as a workaround for older Tors, but now it's never
the correct thing to do (especially since anything that didn't
understand RELAY_EARLY is now deprecated hard).
This patch should make us reject every Tor that was vulnerable to
CVE-2011-0427. Additionally, it makes us reject every Tor that couldn't
handle RELAY_EARLY cells, which helps with proposal 110 (#4339).
Back in #1240, r1eo linked to information about how this could happen
with older Linux kernels in response to nmap. Bugs #4545 and #4547
are about how our approach to trying to deal with this condition was
broken and stupid. Thanks to wanoskarnet for reminding us about #1240.
This is a fix for the abovementioned bugs, and is a bugfix on
0.1.0.3-rc.
Preprocessor directives should not be put inside the arguments
of a macro. This is not supported on older GCC releases (< 3.3)
thus broke compilation on Haiku (running gcc2).
It's inefficient, but the more efficient solution (only try to attach
streams aiming for this HS) would require far more complexity for a gain
that should be tiny.
The client's anonymity when accessing a non-HS address in tor2web-mode
would be easily nuked by inserting an inline image with a .onion URL, so
don't even pretend to access non-HS addresses through Tor.
The Tor2webMode torrc option is still required to run a Tor client in
'tor2web mode', but now it can't be turned on at runtime in a normal build
of Tor. (And a tor2web build of Tor can't be used as a normal Tor client,
so we don't have to worry as much about someone distributing packages with
this particular pistol accessible to normal users.)
This resolves a loop warning on "MapAddress *.example.com
example.com", makes the rewrite log messages correct, and fixes the
behavior of "MapAddress *.a *.b" when just given "a" as an input.
MapAddress *.torproject.org torproject.org would have been interpreted
as a map from a domain to itself, and would have cleared the mapping.
Now we require not only a match of domains, but of wildcards.
Incidentally, we've got 30969 lines in master with a comma
in them, of which 1995 have a comma followed by a non-newline,
non-space character. So about 93% of our commas are right,
but we have a substantial number of "crowded" lines.
It might be nice to support this someday, but for now it would fail
with an infinite remap cycle. (If I say "remap * *.foo.exit",
then example.com ->
example.com.foo.exit ->
example.com.foo.exit.foo.exit ->
example.com.foo.exit.foo.exit.foo.exit -> ...)
In this new representation for wildcarded addresses, there are no
longer any 'magic addresses': rather, "a.b c.d", "*.a.b c.d" and
"*.a.b *.c.d" are all represented by a mapping from "a.b" to "c.d". we
now distinguish them by setting bits in the addressmap_entry_t
structure, where src_wildcard is set if the source address had a
wildcard, and dst_wildcard is set if the target address had a
wildcard.
This lets the case where "*.a.b *.c.d" or "*.a.b c.d" remap the
address "a.b" get handled trivially, and lets us simplify and improve
the addressmap_match_superdomains implementation: we can now have it
run in O(parts of address) rather than O(entries in addressmap).
1. Only allow '*.' in MapAddress expressions. Ignore '*ample.com' and '.example.com'.
This has resulted in a slight refactoring of config_register_addressmaps.
2. Add some more detail to the man page entry for AddressMap.
3. Fix initialization of a pointer to NULL rather than 0.
4. Update the unit tests to cater for the changes in 1 and test more explicitly for
recursive mapping.
1. Implement the following mapping rules:
MapAddress a.b.c d.e.f # This is what we have now
MapAddress .a.b.c d.e.f # Replaces any address ending with .a.b.c with d.e.f
MapAddress .a.b.c .d.e.f # Replaces the .a.b.c at the end of any addr with .d.e.f
(Note that 'a.b.c .d.e.f' is invalid, and will be rejected.)
2. Add tests for the new rules.
3. Allow proper wildcard annotation, i.e. '*.d.e' '.d.e' will still work.
4. Update addressmap_entry_t with an is_wildcard member.
This keeps the IP address and TCP for a given OR port together,
reducing the risk of using an address for one address family with a
port of another.
Make node_get_addr() a wrapper function for compatibility.
This is not as conservative as we could do it, f.ex. by looking at the
connection and only do this for connections to bridges. A non-bridge
should never have anything else than its primary IPv4 address set
though, so I think this is safe.
Don't touch the string representation in routerinfo_t->address.
Also, set or clear the routerinfo_t->ipv6_preferred flag based on the
address family of the bridge.
Comments below focus on changes, see diff for added code.
New type tor_addr_port_t holding an IP address and a TCP/UDP port.
New flag in routerinfo_t, ipv6_preferred. This should go in the
node_t instead but not now.
Replace node_get_addr() with
- node_get_prim_addr() for primary address, i.e. IPv4 for now
- node_get_pref_addr() for preferred address, IPv4 or IPv6.
Rename node_get_addr_ipv4h() node_get_prim_addr_ipv4h() for
consistency. The primary address will not allways be an IPv4 address.
Same for node_get_orport() -> node_get_prim_orport().
Rewrite node_is_a_configured_bridge() to take all OR ports into account.
Extend argument list to extend_info_from_node and
extend_info_from_router with a flag indicating if we want to use the
routers primary address or the preferred address. Use the preferred
address in as few situtations as possible for allowing clients to
connect to bridges over IPv6.
This code handles the new ORPort options, and incidentally makes all
remaining port types use the new port configuration systems.
There are some rough edges! It doesn't do well in the case where your
Address says one thing but you say to Advertise another ORPort. It
doesn't handle AllAddrs. It doesn't actually advertise anything besides
the first listed advertised IPv4 ORPort and DirPort. It doesn't do
port forwarding to them either.
It's not tested either, it needs more documentation, and it probably
forgets to put the milk back in the refrigerator.
Some controllers want this so they can mess with Tor's configuration
for a while via the control port before actually letting Tor out of
the house.
We do this with a new DisableNetwork option, that prevents Tor from
making any outbound connections or binding any non-control
listeners. Additionally, it shuts down the same functionality as
shuts down when we are hibernating, plus the code that launches
directory downloads.
To make sure I didn't miss anything, I added a clause straight to
connection_connect, so that we won't even try to open an outbound
socket when the network is disabled. In my testing, I made this an
assert, but since I probably missed something, I've turned it into a
BUG warning for testing.
This will mainly help distributors by giving a way to set system or package
defaults that a user can override, and that a later package can replace.
No promises about the particular future location or semantics for this:
we will probably want to tweak it some before 0.2.3.x-rc
The file is searched for in CONFDIR/torrc-defaults , which can be
overridden with the "--defaults-torrc" option on the command line.
This starts an effort to refactor torrc handling code to make it easier
to live with. It makes it possible to override exit policies from the
command line, and possible to override (rather than append to) socksport
lists from the command line.
It'll be necessary to make a "base" torrc implementation work at all.
Instead of only writing the dynamic DH prime modulus to a file, write
the whole DH parameters set for forward compatibility. At the moment
we only accept '2' as the group generator.
The DH parameters gets stored in base64-ed DER format to the
'dynamic_dh_params' file.
Let's *not* expose more cross-platform-compatibility structures, or
expect code to use them right.
Also, don't fclose() stdout_handle and stdin_handle until we do
tor_process_handle_destroy, or we risk a double-fclose.
We used to do init_keys() if DynamicDHGroups changed after a HUP, so
that the dynamic DH modulus was stored on the disk. Since we are now
doing dynamic DH modulus storing in crypto.c, we can simply initialize
the TLS context and be good with it.
Introduce a new function router_initialize_tls_context() which
initializes the TLS context and use it appropriately.
The function is over 10 or 20% on some of Moritz's profiles, depending
on how you could.
Since it's checking for a multi-hour timeout, this is safe to do.
Fixes bug 4518.
Completely disable stats if we aren't running as a relay. We won't
collect any anyway, so setting up the infrastructure for them and
logging about them is wrong. This also removes a confusing log
message that clients without a geoip db would have seen.
Fixes bug 4353.
When running with IOCP, we are in theory able to use userspace-
allocated buffers to avoid filling up the stingy amount of kernel
space allocated for sockets buffers.
The bufferevent_async implementation in Libevent provides this
ability, in theory. (There are likely to be remaining bugs). This
patch adds a new option that, when using IOCP bufferevents, sets
each socket's send and receive buffers to 0, so that we should use
this ability.
When all the bugs are worked out here, if we are right about bug 98,
this might solve or mitigate bug 98.
This option is experimental and will likely require lots of testing
and debugging.
Let's make it more obvious to the everyday reader that eventdns.c is
a) Based on Libevent's evdns.c
b) Slated for demolition
c) Supposed to keep API-compatibility with Libevent.
d) Not worth tweaking unless there's a bug.
- Add a LOG_WARN message when registering the transports of a server
managed proxy, so that the bridge operator can see in what ports the
transports spawned and notify his/her clients.
The Right Way to expire an intro point is to establish a new one to
replace it, publish a new descriptor that doesn't list any expiring intro
points, and *then*, once our upload attempts for the new descriptor have
ended (whether in success or failure), close the expiring intro points.
Unfortunately, we can't find out when the new descriptor has actually been
uploaded, so we'll have to settle for a five-minute timer.
There should be no significant behaviour changes due to this commit (only
a log-message change or two), despite the rather massive overhaul, so this
commit doesn't include a changes/ file. (The commit that teaches
intro_point_should_expire_now to return non-zero gets a changes/ file,
though.)
We would stash the certs in the handshake state before checking them
for validity... and then if they turned out to be invalid, we'd give
an error and free them. Then, later, we'd free them again when we
tore down the connection.
Fixes bug 4343; fix on 0.2.3.6-alpha.
This way, all of the DA operators can upgrade immediately, without nuking
every client's set of entry guards as soon as a majority of them upgrade.
Until enough guards have upgraded, a majority of dirauths should set this
config option so that there are still enough guards in the network. After
a few days pass, all dirauths should use the default.
The patch for 3228 made us try to run init_keys() before we had loaded
our state file, resulting in an assert inside init_keys. We had moved
it too early in the function.
Now it's later in the function, but still above the accounting calls.
Previously we did this nearer to the end (in the old_options &&
transition_affects_workers() block). But other stuff cares about
keys being consistent with options... particularly anything which
tries to access a key, which can die in assert_identity_keys_ok().
Fixes bug 3228; bugfix on 0.2.2.18-alpha.
Conflicts:
src/or/config.c
When we added support for separate client tls certs on bridges in
a2bb0bfdd5 we forgot to correctly initialize this when changing
from relay to bridge or vice versa while Tor is running. Fix that
by always initializing keys when the state changes.
Fixes bug 2433.
Conflicts:
src/or/config.c
We use a hash of the identity key to seed a prng to tell when an
accounting period should end. But thanks to the bug998 changes,
clients no longer have server-identity keys to use as a long-term seed
in accounting calculations. In any case, their identity keys (as used
in TLS) were never never fixed. So we can just set the wakeup time
from a random seed instead there. Still open is whether everybody
should be random.
This patch fixes bug 2235, which was introduced in 0.2.2.18-alpha.
Diagnosed with help from boboper on irc.
In a2bb0bf we started using a separate client identity key. When we are
in "public server mode" (that means not a bridge) we will use the same
key. Reusing the key without doing the proper refcounting leads to a
segfault on cleanup during shutdown. Fix that.
Also introduce an assert that triggers if our refcount falls below 0.
That should never happen.
We now require that:
- Only actual servers should ever call get_server_identity_key
- If you're being a client or bridge, the client and server keys should
differ.
- If you're being a public relay, the client and server keys
should be the same.
* Make tor_tls_context_new internal to tortls.c, and return the new
tor_tls_context_t from it.
* Add a public tor_tls_context_init wrapper function to replace it.
Conflicts:
src/or/main.c
src/or/router.c
Since we check for naughty renegotiations using
tor_tls_t.server_handshake_count we don't need that semi-broken
function (at least till there is a way to disable rfc5746
renegotiations too).
When you're doing malloc(sizeof(int)), something may well have gone
wrong.
This technique is a bit abusive, but we're already relying on it
working correctly in geoip.c.
To get a better idea what's going on on Tonga, add some code to report
how often the most and least frequently fetched descriptor was fetched,
as well as 25, 50, 75 percentile.
Also ensure we only count bridge descriptors here.
- Add a tor_process_get_pid() function that returns the PID of a
process_handle_t.
- Conform to make check-spaces.
- Add some more documentation.
- Improve some log messages.
We used to try to terminate the managed proxy process even if it
failed while launching. We introduce a new managed proxy state, to
represent a *broken* and *not launched* proxy.
This is used for the bridge authority currently, to get a better
intuition on how many descriptors are actually fetched from it and how
many fetches happen in total.
Implements ticket 4200.
Fixes bug 4259, bugfix on 0.2.2.25-alpha. Bugfix by "Tey'".
Original message by submitter:
Changing nodes restrictions using a controller while Tor is doing
DNS resolution could makes Tor crashes (on WinXP at least). The
problem can be repeated by trying to reach a non-existent domain
using Tor:
curl --socks4a 127.0.0.1:9050 inexistantdomain.ext
.. and changing the ExitNodes parameter through the control port
before Tor returns a DNS resolution error (of course, the following
command won't work directly if the control port is password
protected):
echo SETCONF ExitNodes=TinyTurtle | nc -v 127.0.0.1 9051
Using a non-existent domain is needed to repeat the issue so that
Tor takes a few seconds for resolving the domain (which allows us to
change the configuration). Tor will crash while processing the
configuration change.
The bug is located in the addressmap_clear_excluded_trackexithosts
method which iterates over the entries of the addresses map in order
to check whether the changes made to the configuration will impact
those entries. When a DNS resolving is in progress, the new_adress
field of the associated entry will be set to NULL. The method
doesn't expect this field to be NULL, hence the crash.
Previously, we would treat an intro circuit failure as a timeout iff the
circuit failed due to a mismatch in relay identity keys. (Due to a bug
elsewhere, we only recognize relay identity-key mismatches on the first
hop, so this isn't as bad as it could have been.)
Bugfix on commit eaed37d14c, not yet in any
release.
It's too risky to have a function where if you leave one parameter
NULL, it splits up address:port strings, but if you set it, it does
hostname resolution.
Under the new convention, having a tor_addr.*lookup function that
doesn't do hostname resolution is too close for comfort.
I used this script here, and have made no other changes.
s/tor_addr_parse_reverse_lookup_name/tor_addr_parse_PTR_name/g;
s/tor_addr_to_reverse_lookup_name/tor_addr_to_PTR_name/g;
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Right now we can take the digests only of an RSA key, and only expect to
take the digests of an RSA key. The old tor_cert_get_id_digests() would
return a good set of digests for an RSA key, and an all-zero one for a
non-RSA key. This behavior is too error-prone: it carries the risk that
we will someday check two non-RSA keys for equality and conclude that
they must be equal because they both have the same (zero) "digest".
Instead, let's have tor_cert_get_id_digests() return NULL for keys we
can't handle, and make its callers explicitly test for NULL.
Also, define all commands > 128 as variable-length when using
v3 or later link protocol. Running into a var cell with an
unrecognized type is no longer a bug.
Without this patch, Tor wasn't sure whether it would be hibernating or
not, so it postponed opening listeners until after the privs had been
dropped. This doesn't work so well for low ports. Bug was introduced in
the fix for bug 2003. Fixes bug 4217, reported by Zax and katmagic.
Thanks!
One of its callers assumes a non-zero result indicates a permanent failure
(i.e. the current attempt to connect to this HS either has failed or is
doomed). The other caller only requires that this function's result
never equal -2.
Bug reported by Sebastian Hahn.
Change the default values for collecting directory request statistics and
inlcuding them in extra-info descriptors to 1.
Don't break if we are configured to collect directory request or entry
statistics and don't have a GeoIP database. Instead, print out a notice
and skip initializing the affected statistics code.
This is the cherry-picked 499661524b.
Previously Tor would always claim to have been given a hostname
by the client, while actually only verifying that the client
is using SOCKS4A or SOCKS5 with hostnames. Both protocol versions
allow IP addresses, too, in which case the log messages were wrong.
Fixes#4094.
Previously, we wouldn't refetch an HS's descriptor unless we didn't
have one at all. That was equivalent to refetching iff we didn't have
a usable one, but the next commit will make us keep some non-usable HS
descriptors around in our cache.
Code bugfix on the release that introduced the v2 HS directory system,
because rend_client_refetch_v2_renddesc's documentation comment should
have described what it actually did, not what its behaviour happened
to be equivalent to; no behaviour change in this commit.
Otherwise, we can wind up munging our reference counts if we set it in
the middle of loading the nodes. This happens because
nodelist_set_consensus() and microdesc_reload_cache() are both in the
business of adjusting microdescriptors' references.
we don't need to check whether we don't have enough guards right after
concluding that we do have enough.
slight efficiency fix suggested by an anonymous fellow on irc.
We were doing "divide bandwidth by 1000, then multiply by msec", but
that would lose accuracy: instead of getting your full bandwidth,
you'd lose up to 999 bytes per sec. (Not a big deal, but every byte
helps.)
Instead, do the multiply first, then the division. This can easily
overflow a 32-bit value, so make sure to do it as a 64-bit operation.
With managed proxies you would always get the error message:
"You have a Bridge line using the X pluggable transport, but there
doesn't seem to be a corresponding ClientTransportPlugin line."
because the check happened directly after parse_client_transport_line()
when managed proxies were not fully configured and their transports
were not registered.
The fix is to move the validation to run_scheduled_events() and make
sure that all managed proxies are configured first.
* Create mark/sweep functions for transports.
* Create a transport_resolve_conflicts() function that tries to
resolve conflicts when registering transports.
Previously the FooPort was ignored and the default used instead,
causing Tor to bind to the wrong port if FooPort and the default
port don't match or the CONN_TYPE_FOO_LISTENER has no default port.
Fixes#3936.
Right now we only force a new descriptor upload every 18 hours.
This can make servers become unlisted if they upload a descriptor at
time T which the authorities reject as being "too similar" to one
they uploaded before. Nothing will actually make the server upload a
new descriptor later on, until another 18 hours have passed.
This patch changes the upload behavior so that the 18 hour interval
applies only when we're listed in a live consensus with a descriptor
published within the last 18 hours. Otherwise--if we're not listed
in the live consensus, or if we're listed with a publication time
over 18 hours in the past--we upload a new descriptor every 90
minutes.
This is an attempted bugfix for #3327. If we merge it, it should
obsolete #535.
Conflicts:
src/or/connection.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/dnsserv.c
Some of these were a little tricky, since they touched code that
changed because of the prop171 fixes.
Add a "default" state which we use until we've decided whether we're
live or hibernating. This allows us to properly track whether we're
resuming a hibernation period or not. Fixes bug 2003.
For printf, %f and %lf are synonymous, since floats are promoted to
doubles when passed as varargs. It's only for scanf that we need to
say "%lf" for doubles and "%f" for floats.
Apparenly, some older compilers think it's naughty to say %lf and like
to spew warnings about it.
Found by grarpamp.
For bufferevents, we had all of connection_buckets_decrement() stubbed
out. But that's not actually right! The rephist_* parts were
essential for, inter alia, recording our own bandwidth. This patch
splits out the rephist parts of connection_buckets_decrement() into their
own function, and makes the bufferevent code call that new function.
Fixes bug 3803, and probably 3824 and 3826 too. Bugfix on 0.2.3.1-alpha.
Previously, if you were set up to use microdescriptors, and you
weren't a cache, you'd never fetch router descriptors (except for
bridges). Now FetchUselessDescriptors causes descriptors and
mirodescs to get cached. Also, FetchUselessDescriptors changes the
behavior of "UseMicrodescriptors auto" to be off, since there's no
point in saying "UseMicrodescriptors 1" when you have full descriptors
too.
Fix for bug 3851; bugfix on 0.2.3.1-alpha.
Because tunneled connections are implemented with buffervent_pair,
writing to them can cause an immediate flush. This means that
added to them and then checking to see whether their outbuf is
empty is _not_ an adequate way to see whether you added anything.
This caused a problem in directory server connections, since they
would try spooling a little more data out, and then close the
connection if there was no queued data to send.
This fix should improve matters; it only closes the connection if
there is no more data to spool, and all of the spooling callbacks
are supposed to put the dirconn into dir_spool_none on completion.
This is bug 3814; Sebastian found it; bugfix on 0.2.3.1-alpha.
When we're doing filtering ssl bufferevents, we want the rate-limits
to apply to the lowest level of the bufferevent stack, so that we're
actually limiting bytes sent on the network. Otherwise, we'll read
from the network aggressively, and only limit stuff as we process it.
This behavior is normal when we want more data than the evbuffer
actually has for us. We'll ask for (say) 7 bytes, get only 5
(because that's all there is), try to parse the 5 bytes, and get
told "no, I want 7". One option would be to bail out early whenever
want_length is > buflen, but sometimes we use an over-large
want_length. So instead, let's just remove the warning here: it's
not a bug after all.
* Use strcmpstart() instead of strcmp(x,y,strlen(y)).
* Warn the user if the managed proxy failed to launch.
* Improve function documentation.
* Use smartlist_len() instead of n_unconfigured_proxies.
* Split managed_proxy_destroy() to managed_proxy_destroy()
and managed_proxy_destroy_with_transports().
* Constification.
It turns out that it wasn't enough to set the configuration to
"auto", since the correct behavior for "auto" had been disabled in
microdesc.c. :p
(Hasn't been in a release yet, so doesn't need a changes entry.)
Now we track *which* stream with ISO_STREAM set is associated to a
particular circuit, so that we won't think that stream is incompatible
with its circuit and launch another one a second later, and we use that
same field to mark circuits which have had an ISO_STREAM stream attached
to them, so that we won't ever put a second stream on that circuit.
Fixes bug 3695.
Only write a bridge-stats string if bridge stats have been
initialized. This behavior is similar to dirreq-stats, entry-stats,
etc.
Also add a few unit tests for the bridge-stats code.
This patch separates the generation of a dirreq-stats string from
actually writing it to disk. The new geoip_format_dirreq_stats()
generates a dirreq-stats string that geoip_dirreq_stats_write() writes
to disk. All the state changing (e.g., resetting the dirreq-stats
history and initializing the next measurement interval) takes place in
geoip_dirreq_stats_write(). That allows us to finally test the
dirreq-stats code better.
Now that formatting the buffer-stats string is separate from writing
it to disk, we can also decouple the logic to extract stats from
circuits and finally write some unit tests for the history code.
The new rep_hist_format_buffer_stats() generates a buffer-stats string
that rep_hist_buffer_stats_write() writes to disk. All the state
changing (e.g., resetting the buffer-stats history and initializing
the next measurement interval) takes place in
rep_hist_buffer_stats_write(). That allows us to finally test the
buffer-stats code better.
So far, if we didn't see a single circuit, we refrained from
generating a cell-stats string and logged a warning. Nobody will
notice the warning, and people will wonder why there's no cell-stats
string in the extra-info descriptor. The better behavior is to
generate a cell-stats string with all zeros.
Right now, we append statistics to files in the stats/ directory for
half of the statistics, whereas we overwrite these files for the other
half. In particular, we append buffer, dirreq, and entry stats and
overwrite exit, connection, and bridge stats.
Appending to files was useful when we didn't include stats in extra-info
descriptors, because otherwise we'd have to copy them away to prevent
Tor from overwriting them.
But now that we include statistics in extra-info descriptors, it makes
no sense to keep the old statistics forever. We should change the
behavior to overwriting instead of appending for all statistics.
Implements #2930.
They *are* non-NUL-terminated, after all (and they have to be, since
the SOCKS5 spec allows them to contain embedded NULs. But the code
to implement proposal 171 was copying them with tor_strdup and
comparing them with strcmp_opt.
Fix for bug on 3683; bug not present in any yet-released version.
Previously we'd just looked at the connection type, but that's
always CONN_TYPE_AP. Instead, we should be looking at the type of
the listener that created the connection.
Spotted by rransom; fixes bug 3636.
We'll still need to tweak it so that it looks for includes and
libraries somewhere more sensible than "where we happened to find
them on Erinn's system"; so that tests and tools get built too;
so that it's a bit documented; and so that we actually try running
the output.
Work done with Erinn Clark.
The conflicts are with the proposal 171 circuit isolation code, and
they're all trivial: they're just a matter of both branches adding
some unrelated code in the same places.
Conflicts:
src/or/circuituse.c
src/or/connection.c
The problem was that we weren't initializing want_length to 0 before
calling parse_socks() the first time, so it looked like we were
risking an infinite loop when in fact we were safe.
Fixes 3615; bugfix on 0.2.3.2-alpha.
Back when I added this logic in 20c0581a79, the rule was that whenever
a circuit finished building, we cleared its isolation info. I did that
so that we would still use the circuit even if all the streams that
had previously led us to tentatively set its isolation info had closed.
But there were problems with that approach: We could pretty easily get
into a case where S1 had led us to launch C1 and S2 had led us to
launch C2, but when C1 finished, we cleared its isolation and attached
S2 first. Since C2 was still marked in a way that made S1
unattachable to it, we'd then launch another circuit needlessly.
So instead, we try the following approach now: when a circuit is done
building, we try to attach streams to it. If it remains unused after
we try attaching streams, then we clear its isolation info, and try
again to attach streams.
Thanks to Sebastian for helping me figure this out.
One-hop dirconn streams all share a session group, and get the
ISO_SESSIONGRP flag: they may share circuits with each other and
nothing else.
Anonymized dirconn streams get a new internal-use-only ISO_STREAM
flag: they may not share circuits with anything, including each other.
The new candidate rule, which arma suggested and I like, is that
the original address as received from the client connection or as
rewritten by the controller is the address that counts.
This is mainly meant as a way to keep clients from accidentally
DOSing themselves by (e.g.) enabling IsolateDestAddr or
IsolateDestPort on a port that they use for HTTP.
Our old "do we need to launch a circuit for stream S" logic was,
more or less, that if we had a pending circuit that could handle S,
we didn't need to launch a new one.
But now that we have streams isolated from one another, we need
something stronger here: It's possible that some pending C can
handle either S1 or S2, but not both.
This patch reuses the existing isolation logic for a simple
solution: when we decide during circuit launching that some pending
C would satisfy stream S1, we "hypothetically" mark C as though S1
had been connected to it. Now if S2 is incompatible with S1, it
won't be something that can attach to C, and so we'll launch a new
stream.
When the circuit becomes OPEN for the first time (with no streams
attached to it), we reset the circuit's isolation status. I'm not
too sure about this part: I wanted some way to be sure that, if all
streams that would have used a circuit die before the circuit is
done, the circuit can still get used. But I worry that this
approach could also lead to us launching too many circuits. Careful
thought needed here.
This is the meat of proposal 171: we change circuit_is_acceptable()
to require that the connection is compatible with every connection
that has been linked to the circuit; we update circuit_is_better to
prefer attaching streams to circuits in the way that decreases the
circuits' usefulness the least; and we update link_apconn_to_circ()
to do the appropriate bookkeeping.
The "nym epoch" of a stream is defined as the number of times that
NEWNYM had been called before the stream was opened. All streams
are isolated by nym epoch.
This feature should be redundant with existing signewnym stuff, but
it provides a good belt-and-suspenders way for us to avoid ever
letting any circuit type bypass signewnym.
This patch adds fields to track how streams should be isolated, and
ensures that those fields are set correctly. It also adds fields to
track what streams can go on a circuit, and adds functions to see
whether a streams can go on a circuit and update the circuit
accordingly. Those functions aren't yet called.
Proposal 171 gives us a new syntax for parsing client port options.
You can now have as many FooPort options as you want (for Foo in
Socks, Trans, DNS, NATD), and they can have address:port arguments,
and you can specify the level of isolation on those ports.
Additionally, this patch refactors the client port parsing logic to
use a new type, port_cfg_t. Previously, ports to be bound were
half-parsed in config.c, and later re-parsed in connection.c when
we're about to bind them. Now, parsing a port means converting it
into a port_cfg_t, and binding it uses only a port_cfg_t, without
needing to parse the user-provided strings at all.
We should do a related refactoring on other port types. For
control ports, that'll be easy enough. For ORPort and DirPort,
we'll want to do this when we solve proposal 118 (letting servers
bind to and advertise multiple ports).
This implements tickets 3514 and 3515.
This adds a little code complexity: we need to remember for each
node whether it supports the right feature, and then check for each
connection whether it's exiting at such a node. We store this in a
flag in the edge_connection_t, and set that flag at link time.
- Conform to make check-spaces
- Build without warnings from passing size_t to %d
- Use connection_get_inbuf_len(), not buf_datalen (otherwise bufferevents
won't work).
- Don't log that we're using this feature at warn.
Previously we were using router_get_by_id(foo) to test "do we have a
descriptor that will let us make an anonymous circuit to foo". But
that isn't right for microdescs: we should have been using node_t.
Fixes bug 3601; bugfix on 0.2.3.1-alpha.
Instead, use compare_tor_addr_to_node_policy everywhere.
One advantage of this is that compare_tor_addr_to_node_policy can
better distinguish 0.0.0.0 from "unknown", which caused a nasty bug
with microdesc users.
Previously, we had an issue where we'd treat an unknown address as
0, which turned into "0.0.0.0", which looked like a rejected
address. This meant in practice that as soon as we started doing
comparisons of unknown uint32 addresses to short policies, we'd get
'rejected' right away. Because of the circumstances under which
this would be called, it would only happen when we had local DNS
cached entries and we were looking to launch new circuits.
* Add some utility transport functions in circuitbuild.[ch] so that we
can use them from pt.c.
* Make the accounting system consider traffic coming from proxies.
* Make sure that we only fetch bridge descriptors when all the
transports are configured.
Rationale: right now there seems to be no way for our bootstrap
status to dip under 100% once it has reached 100%. Thus, recording
broken connections after that point is useless, and wastes memory.
If at some point in the future we allow our bootstrap level to go
backwards, then we should change this rule so that we disable
recording broken connection states _as long as_ the bootstrap status
is 100%.
- We were reporting the _bottom_ N failing states, not the top N.
- With bufferevents enabled, we logged all TLS states as being "in
bufferevent", which isn't actually informative.
- When we had nothing to report, we reported nothing too loudly.
- Also, we needed documentation.
This code lets us record the state of any outgoing OR connection
that fails before it becomes open, so we can notice if they're all
dying in the same SSL state or the same OR handshake state.
More work is still needed:
- We need documentation
- We need to actually call the code that reports the failure when
we realize that we're having a hard time connecting out or
making circuits.
- We need to periodically clear out all this data -- perhaps,
whenever we build a circuit successfully?
- We'll eventually want to expose it to controllers, perhaps.
Partial implementation of feature 3116.
It's very easy for nodelist_add_node_family(sl,node) to accidentally
add 'node', and kind of hard to make sure that it omits it. Instead
of taking pains to leave 'node' out, let's instead make sure that we
always include it.
I also rename the function to nodelist_add_node_and_family, and
audit its users so that they don't add the node itself any longer,
since the function will take care of that for them.
Resolves bug 2616, which was not actually a bug.
Previously, we'd just take all the nodes in EntryNodes, see which
ones were already in the guard list, and add the ones that weren't.
There were some problems there, though:
* We'd add _every_ entry in EntryNodes, and add them in the order
they appeared in the routerlist. This wasn't a problem
until we added the ability to give country-code or IP-range
entries in the EntryNodes set, but now that we did, it is.
(Fix: We now shuffle the entry nodes before adding them; only
add up to 10*NumEntryGuards)
* We didn't screen EntryNodes for the Guard flag. That's okay
if the user has specified two or three entry nodes manually,
but if they have listed a whole subcontinent, we should
restrict ourselves to the entries that are currently guards.
(Fix: separate out the new guard from the new non-guard nodes,
and add the Guards first.)
* We'd prepend new EntryNodes _before_ the already configured
EntryNodes. This could lead to churn.
(Fix: don't prepend these.)
This patch also pre-screens EntryNodes entries for
reachableaddresses/excludenodes, even though we check for that
later. This is important now, since we cap the number of entries
we'll add.
Just looking at the "latest" consensus could give us a microdesc
consensus, if microdescs were enabled. That would make us decide
that every routerdesc was unlisted in the latest consensus and drop
them all: Ouch.
Fixes bug 3113; bugfix on 0.2.3.1-alpha.
We have an invariant that a node_t should have an md only if it has
a routerstatus. nodelist_purge tried to preserve this by removing
all nodes without a routerstatus or a routerinfo. But this left
nodes with a routerinfo and a microdesc untouched, even if they had
a routerstatus.
Bug found by frosty_un.
All of the routerset_contains*() functions return 0 if their
routerset_t argument is NULL. Therefore, there's no point in
doing "if (ExcludeNodes && routerset_contains*(ExcludeNodes...))",
for example.
This patch fixes every instance of
if (X && routerstatus_contains*(X,...))
Note that there are other patterns that _aren't_ redundant. For
example, we *don't* want to change:
if (EntryNodes && !routerstatus_contains(EntryNodes,...))
Fixes#2797. No bug here; just needless code.
Previously, we'd get a new descriptor for free when
public_server_mode() changed, since it would count as
affects_workers, which would call init_keys(), which would make us
regenerate a new descriptor. But now that we fixed bug 3263,
init_keys() is no longer necessarily a new descriptor, and so we
need to make sure that public_server_mode() counts as a descriptor
transition.
The issue was that we overlooked the possibility of reverse DNS success
at the end of connection_ap_handshake_socks_resolved(). Issue discovered
by katmagic, thanks!
Returning a tristate is needless here; we can just use the yielded
transport/proxy_type field to tell whether there's a proxy, and have
the return indicate success/failure.
Also, store the proxy_type in the or_connection_t rather than letting
it get out of sync if a configuration reload happens between launching
the or_connection and deciding what to say with it.
- const-ify some transport_t pointers
- Remove a vestigial argument to parse_bridge_line
- Make it compile without warnings on my laptop with
--enable-gcc-warnings
We were using strncpy before, which isn't our style for stuff like
this.
This isn't a bug, though: before calling strncpy, we were checking
that strlen(src) was indeed == HEX_DIGEST_LEN, which is less than
sizeof(dst), so there was no way we could fail to NUL-terminate.
Still, strncpy(a,b,sizeof(a)) is an idiom that we ought to squash
everyplace.
Fixes CID #427.
Using strncpy meant that if listenaddress were ever >=
sizeof(sockaddr_un.sun_path), we would fail to nul-terminate
sun_path. This isn't a big deal: we never read sun_path, and the
kernel is smart enough to reject the sockaddr_un if it isn't
nul-terminated. Nonetheless, it's a dumb failure mode. Instead, we
should reject addresses that don't fit in sockaddr_un.sun_path.
Coverity found this; it's CID 428. Bugfix on 0.2.0.3-alpha.
When we rejected a descriptor for not being the one we wanted, we
were letting the parsed descriptor go out of scope.
Found by Coverity; CID # 30.
Bugfix on 0.2.1.26.
(No changes file yet, since this is not in any 0.2.1.x release.)
Every node_t has either a routerinfo_t or a routerstatus_t, so every
node_t *should* have a nickname. Nonetheless, let's make sure in
hex_digest_nickname_matches().
Should quiet CID 434.
This is a little error-prone when the local has a different type
from the parameter, and is very error-prone with both have the same
type. Let's not do this.
Fixes CID #437,438,439,440,441.
For some inexplicable reason, Coverity departs from its usual
standards of avoiding false positives here, and warns about all
sscanf usage, even when the formatting strings are totally safe.
Addresses CID # 447, 446.
Previously, fetch_from_buf_socks() might return 0 if there was still
data on the buffer and a subsequent call to fetch_from_buf_socks()
would return 1. This was making some of the socks5 unit tests
harder to write, and could potentially have caused misbehavior with
some overly verbose SOCKS implementations. Now,
fetch_from_buf_socks() does as much processing as it can, and
returns 0 only if it really needs more data. This brings it into
line with the evbuffer socks implementation.
We added this back in 0649fa14 in 2006, to deal with the case where
the client unconditionally sent us authentication data. Hopefully,
that's not needed any longer, since we now can actually parse
authentication data.
This change also requires us to add and use a pair of
allocator/deallocator functions for socks_request_t, instead of
using tor_malloc_zero/tor_free directly.
In the code as it stood, we would accept any number of socks5
username/password authentication messages, regardless of whether we
had actually negotiated username/password authentication. Instead,
we should only accept one, and only if we have really negotiated
username/password authentication.
This patch also makes some fields of socks_request_t into uint8_t,
for safety.
Multiple Bridge lines can point to the same one ClientTransportPlugin
line, and we can have multiple ClientTransportPlugin lines in our
configuration file that don't match with a bridge. We also issue a
warning when we have a Bridge line with a pluggable transport but we
can't match it to a ClientTransportPlugin line.
* Renamed transport_info_t to transport_t.
* Introduced transport_get_by_name().
* Killed match_bridges_with_transports().
We currently *don't* detect whether any bridges miss their transports,
of if any transports miss their bridges.
* Various code and aesthetic tweaks and English language changes.
A couple of places in control.c were using connection_handle_write()
to flush important stuff (the response to a SIGNAL command, an
ERR-level status event) before Tor went down. But
connection_handle_write() isn't meaningful for bufferevents, so we'd
crash.
This patch adds a new connection_flush() that works for all connection
backends, and makes control.c use that instead.
Fix for bug 3367; bugfix on 0.2.3.1-alpha.
debug-level since it will be quite common. logged at both client
and server side. this step should help us track what's going on
with people filtering tor connections by our ssl habits.
This lets us make a lot of other stuff const, allows the compiler to
generate (slightly) better code, and will make me get slightly fewer
patches from folks who stick mutable stuff into or_options_t.
const: because not every input is an output!
Original message from bug3393:
check_private_dir() to ensure that ControlSocketsGroupWritable is
safe to use. Unfortunately, check_private_dir() only checks against
the currently running user… which can be root until privileges are
dropped to the user and group configured by the User config option.
The attached patch fixes the issue by adding a new effective_user
argument to check_private_dir() and updating the callers. It might
not be the best way to fix the issue, but it did in my tests.
(Code by lunar; changelog by nickm)
* Improved function documentation.
* Renamed find_bridge_transport_by_addrport() to
find_transport_by_bridge_addrport().
* Sanitized log severities we use.
* Ran check-spaces.
When we set a networkstatus in the non-preferred flavor, we'd check
the time in the current_consensus. But that might have been NULL,
which could produce a crash as seen in bug 3361.
When we added the check for key size, we required that the keys be
128 bytes. But RSA_size (which defers to BN_num_bytes) will return
128 for keys of length 1017..1024. This patch adds a new
crypto_pk_num_bits() that returns the actual number of significant
bits in the modulus, and uses that to enforce key sizes.
Also, credit the original bug3318 in the changes file.
UseBridges 1 now means "connect only to bridges; if you know no
bridges, don't make connections." UseBridges auto means "Use bridges
if they are known, and we have no EntryNodes set, and we aren't a
server." UseBridges 0 means "don't use bridges."
This merge was a bit nontrivial, since I had to write a new
node_is_a_configured_bridge to parallel router_is_a_configured_bridge.
Conflicts:
src/or/circuitbuild.c
options->DirPort is 0 in the unit tests, so
router_get_advertised_dir_port() would return 0 so we wouldn't pick a
dirport. This isn't what we want for the unit tests. Fixes bug
introduced in 95ac3ea594.
Previously, Tor would dereference a NULL pointer and crash if
lookup_last_hid_serv_request were called before the first call to
directory_clean_last_hid_serv_requests. As far as I can tell, that's
currently impossible, but I want that undocumented invariant to go away
in case I^Wwe break it someday.
If set to 1, Tor will attempt to prevent basic debugging
attachment attempts by other processes. (Default: 1)
Supports Mac OS X and Gnu/Linux.
Sebastian provided useful feedback and refactoring suggestions.
Signed-off-by: Jacob Appelbaum <jacob@appelbaum.net>
When we introduced NEED_KEY_1024 in routerparse.c back in
0.2.0.1-alpha, I forgot to add a *8 when logging the length of a
bad-length key.
Bugfix for 3318 on 0.2.0.1-alpha.
The patch for 3228 made us try to run init_keys() before we had loaded
our state file, resulting in an assert inside init_keys. We had moved
it too early in the function.
Now it's later in the function, but still above the accounting calls.
The conflicts were mainly caused by the routerinfo->node transition.
Conflicts:
src/or/circuitbuild.c
src/or/command.c
src/or/connection_edge.c
src/or/directory.c
src/or/dirserv.c
src/or/relay.c
src/or/rendservice.c
src/or/routerlist.c
The comment fixes are trivial. The defensive programming trick is to
tolerate receiving NULL inputs on the describe functions. That should
never actually happen, but it seems like the likeliest mistake for us
to make in the future.
Previously we did this nearer to the end (in the old_options &&
transition_affects_workers() block). But other stuff cares about
keys being consistent with options... particularly anything which
tries to access a key, which can die in assert_identity_keys_ok().
Fixes bug 3228; bugfix on 0.2.2.18-alpha.
Fixes part of #1297; bugfix on 48e0228f1e,
when circuit_expire_building was changed to assume that timestamp_dirty
was set when a circuit changed purpose to _C_REND_READY. (It wasn't.)
The previous attempt was incomplete: it told us not to publish a
descriptor, but didn't stop us from generating one. Now we treat an
absent OR port the same as not knowing our address. (This means
that when we _do_ get an OR port, we need to mark the descriptor
dirty.)
More attempt to fix bug3216.
This situation can happen easily if you set 'ORPort auto' and
'AccountingMax'. Doing so means that when you have no ORPort, you
won't be able to set an ORPort in a descriptor, so instead you would
just generate lots of invalid descriptors, freaking out all the time.
Possible fix for 3216; fix on 0.2.2.26-beta.
We had all the code in place to handle this right... except that we
were unconditionally opening a PF_INET socket instead of looking at
sa_family. Ow.
Fixes bug 2574; not a bugfix on any particular version, since this
never worked before.
Most instances were dead code; for those, I removed the assignments.
Some were pieces of info we don't currently plan to use, but which
we might in the future. For those, I added an explicit cast-to-void
to indicate that we know that the thing's unused. Finally, one was
a case where we were testing the wrong variable in a unit test.
That one I fixed.
This resolves bug 3208.
On win64, sockets are of type UINT_PTR; on win32 they're u_int;
elsewhere they're int. The correct windows way to check a socket for
being set is to compare it with INVALID_SOCKET; elsewhere you see if
it is negative.
On Libevent 2, all callbacks take sockets as evutil_socket_t; we've
been passing them int.
This patch should fix compilation and correctness when built for
64-bit windows. Fixes bug 3270.
We used to regenerate our descriptor whenever we'd get a sighup. This
was caused by a bug in options_transition_affects_workers() that would
return true even if the options were exactly the same. Down the call
path we'd call init_keys(), which made us make a new descriptor which
the authorities would reject, and the node would subsequently fall out
of the consensus.
This patch fixes only the first part of this bug:
options_transition_affects_workers() behaves correctly now. The second
part still wants a fix.
tor_process_monitor_new can't currently return NULL, but if it ever can,
we want that to be an explicitly fatal error, without relying on the fact
that monitor_owning_controller_process's chain of caller will exit if it
fails.
When we configure a new bridge via the controller, don't wait up to ten
seconds before trying to fetch its descriptor. This wasn't so bad when
you listed your bridges in torrc, but it's dreadful if you configure
your bridges via vidalia.
