Roger Dingledine
0ed8d5a537
allow countries and IP addresses in EntryNodes
2010-09-29 03:00:06 -04:00
Nick Mathewson
703eb087f5
Merge remote branch 'origin/maint-0.2.2'
2010-09-29 00:38:44 -04:00
Roger Dingledine
a58610a87e
even more comment
2010-09-28 23:50:56 -04:00
Nick Mathewson
f3e8bc391a
Remove the has_old_dnsworkers flag.
2010-09-28 23:37:45 -04:00
Roger Dingledine
512433346f
improve code comments, based on comments from nick
2010-09-28 23:27:00 -04:00
Roger Dingledine
9997676802
handle ugly edge case in retrying entrynodes
...
Specifically, a circ attempt that we'd launched while the network was
down could timeout after we've marked our entrynodes up, marking them
back down again. The fix is to annotate as bad the OR conns that were
around before we did the retry, so if a circuit that's attached to them
times out we don't do anything about it.
2010-09-28 22:32:38 -04:00
Roger Dingledine
7de1caa33f
Actually notice when our last entrynode goes down
...
Otherwise we'd never set have_minimum_dir_info to false, so the
"optimistic retry" would never trigger.
2010-09-28 21:59:31 -04:00
Roger Dingledine
bb22360bad
optimistically retry EntryNodes on socks request
...
We used to mark all our known bridges up when they're all down and we
get a new socks request. Now do that when we've set EntryNodes too.
2010-09-28 19:10:23 -04:00
Roger Dingledine
8bac188572
remove a redundant assert
2010-09-28 19:10:22 -04:00
Roger Dingledine
127f37ad29
refactor; no actual changes
2010-09-28 19:10:22 -04:00
Roger Dingledine
8d1fe50284
Merge branch 'maint-0.2.2'
2010-09-28 18:42:04 -04:00
Roger Dingledine
09a715bb72
Merge branch 'maint-0.2.1' into maint-0.2.2
2010-09-28 18:37:55 -04:00
Roger Dingledine
339993b409
actually retry bridges when your network goes away
2010-09-28 18:36:15 -04:00
Nick Mathewson
73d93c033d
Autodetect the number of CPUs when possible if NumCPUs==0
...
This is needed for IOCP, since telling the IOCP backend about all
your CPUs is a good idea. It'll also come in handy with asn's
multithreaded crypto stuff, and for people who run servers without
reading the manual.
2010-09-28 14:42:21 -04:00
Nick Mathewson
c612ddee17
Add a new option to enable/disable IOCP support
2010-09-28 14:01:45 -04:00
Nick Mathewson
d6e255edbd
Merge branch 'microdesc_dl_v2'
2010-09-28 00:46:01 -04:00
Roger Dingledine
f006f02ca4
Merge branch 'maint-0.2.2'
2010-09-27 18:33:12 -04:00
Roger Dingledine
a467bf5fbb
a dir-spec entry for refuseunknownexits
...
plus quiet a log line
2010-09-27 18:32:09 -04:00
Nick Mathewson
d45b912058
Clean long-unlisted microdescs from the cache
2010-09-27 18:05:01 -04:00
Nick Mathewson
3a492d31d5
Download microdescriptors if you're a cache
...
This commit adds some functions to see what microdescriptors we're missing,
and adds fetch-microdesc/store-microdesc logic to the directory code.
2010-09-27 18:04:44 -04:00
Nick Mathewson
e34d0d3365
When updating routerdesc downloads, look specifically at the ns consensus
...
This will be needed when "get_live_consensus" potentially returns a
microdesc consensus.
2010-09-27 18:04:44 -04:00
Nick Mathewson
9f5b752e4f
Actually parse the m lines from a microdesc consensus
2010-09-27 18:04:44 -04:00
Nick Mathewson
4e0f7f4ffc
Code to download, parse, and store microdesc consensuses
2010-09-27 18:04:43 -04:00
Nick Mathewson
4bfc64ba1c
New function to grab a directory connection fetching a resource
...
We need this to tell if a given consensus flavor is being downloaded
or not.
2010-09-27 18:04:43 -04:00
Nick Mathewson
af7fab020a
Merge remote branch 'origin/maint-0.2.2'
...
Conflicts:
src/or/config.c
2010-09-27 17:52:20 -04:00
Roger Dingledine
9d7f0badb5
changelog entry for bug1751
2010-09-27 17:44:00 -04:00
Nick Mathewson
614eeb378b
Merge remote branch 'sebastian/bug1964' into maint-0.2.2
2010-09-27 17:26:32 -04:00
Sebastian Hahn
c951830002
Fix a bridge segfault
...
When we enabled support to change statistic options without restarting
Tor we forgot to initialize geoip_countries. Fix that.
2010-09-27 23:19:25 +02:00
Nick Mathewson
c97072ef34
Merge branch 'bug1751_enabling' into maint-0.2.2
2010-09-27 17:08:03 -04:00
Nick Mathewson
6c5b9ba625
Change bug1751 enabling code based on comments from arma
2010-09-27 17:07:22 -04:00
Nick Mathewson
5c83c06c98
Merge branch 'bufferevent5'
2010-09-27 16:48:25 -04:00
Nick Mathewson
6950749c0a
Make the bufferevent code use the renegotiation-reenabling hack
2010-09-27 16:07:14 -04:00
Nick Mathewson
e385961542
Merge remote branch 'public/bug1954' into maint-0.2.2
2010-09-27 15:39:40 -04:00
Nick Mathewson
c93cceb919
note that libevent does not have an an easy way to reset buckets atm
2010-09-27 14:22:18 -04:00
Nick Mathewson
b49cf6a77a
Fix whitespace in bufferevents branch
2010-09-27 14:22:18 -04:00
Nick Mathewson
a16ed90ec8
Document and/or fix stuff found by Sebastian in code review
...
Thanks to Sebastian for his code-review of the bufferevents patch series.x
2010-09-27 14:22:18 -04:00
Sebastian Hahn
865bea3b89
Some bufferevents related fixes and pointers for nickm
2010-09-27 14:22:18 -04:00
Nick Mathewson
beb52352f2
Fix build with automake 1.6
...
automake 1.6 doesn't like using a conditional += to add stuff to foo_LDADD.
Instead you need to conditionally define a variable, then non-conditionally
put that variable in foo_LDADD.
2010-09-27 14:22:18 -04:00
Nick Mathewson
ffd5070b04
Convert bufferevents to use rate-limiting.
...
This requires the latest Git version of Libevent as of 24 March 2010.
In the future, we'll just say it requires Libevent 2.0.5-alpha or
later.
Since Libevent doesn't yet support hierarchical rate limit groups,
there isn't yet support for tracking relayed-bytes separately when
using the bufferevent system. If a future version does add support
for hierarchical buckets, we can add that back in.
2010-09-27 14:22:18 -04:00
Nick Mathewson
98ec959c9c
Fix a couple of bufferevent incompatibilities that snuck in.
2010-09-27 14:22:18 -04:00
Nick Mathewson
0c9b64d449
Get zlib compression working with bufferevents.
2010-09-27 14:22:11 -04:00
Nick Mathewson
9796b9bfa6
Implement SOCKS-client support for bufferevents
2010-09-27 12:31:14 -04:00
Nick Mathewson
c74a4ab515
Documentation for a few bufferevent functions.
2010-09-27 12:31:14 -04:00
Nick Mathewson
bd3612cd2b
Get SSL connections and linked connections working with bufferevents.
...
Clients are now verified to work and build circuits correctly. There
are still a few warnings given here and there that I need to look into.
2010-09-27 12:31:14 -04:00
Nick Mathewson
fc4ddafab8
Make control connections use bufferevents
2010-09-27 12:31:14 -04:00
Nick Mathewson
84bb5d573c
Fix crash/warning bug when we get an unexpected close.
...
This was possible if we have already decided to close a bufferevent
connection, but the other side decides to close it first.
2010-09-27 12:31:13 -04:00
Nick Mathewson
44375d4eb8
Add a 0-pullup version of fetch_from_evbuffer_socks
2010-09-27 12:31:13 -04:00
Nick Mathewson
f6899f3a74
Documentation for inspect_evbuffer
2010-09-27 12:31:13 -04:00
Nick Mathewson
698085d56e
Add pullup-free version of fetch_from_evbuffer_http
2010-09-27 12:31:13 -04:00
Nick Mathewson
4af6887d20
Add support for linked connections with bufferevent_pair.
...
Also, set directory connections (linked and otherwise) to use bufferevents.
Also, stop using outbuf_flushlen anywhere except for OR connections.
2010-09-27 12:31:13 -04:00
