Comments below focus on changes, see diff for added code.
New type tor_addr_port_t holding an IP address and a TCP/UDP port.
New flag in routerinfo_t, ipv6_preferred. This should go in the
node_t instead but not now.
Replace node_get_addr() with
- node_get_prim_addr() for primary address, i.e. IPv4 for now
- node_get_pref_addr() for preferred address, IPv4 or IPv6.
Rename node_get_addr_ipv4h() node_get_prim_addr_ipv4h() for
consistency. The primary address will not allways be an IPv4 address.
Same for node_get_orport() -> node_get_prim_orport().
Rewrite node_is_a_configured_bridge() to take all OR ports into account.
Extend argument list to extend_info_from_node and
extend_info_from_router with a flag indicating if we want to use the
routers primary address or the preferred address. Use the preferred
address in as few situtations as possible for allowing clients to
connect to bridges over IPv6.
The Right Way to expire an intro point is to establish a new one to
replace it, publish a new descriptor that doesn't list any expiring intro
points, and *then*, once our upload attempts for the new descriptor have
ended (whether in success or failure), close the expiring intro points.
Unfortunately, we can't find out when the new descriptor has actually been
uploaded, so we'll have to settle for a five-minute timer.
There should be no significant behaviour changes due to this commit (only
a log-message change or two), despite the rather massive overhaul, so this
commit doesn't include a changes/ file. (The commit that teaches
intro_point_should_expire_now to return non-zero gets a changes/ file,
though.)
Now let's have "lookup" indicate that there can be a hostname
resolution, and "parse" indicate that there wasn't. Previously, we
had one "lookup" function that did resolution; four "parse" functions,
half of which did resolution; and a "from_str()" function that didn't
do resolution. That's confusing and error-prone!
The code changes in this commit are exactly the result of this perl
script, run under "perl -p -i.bak" :
s/tor_addr_port_parse/tor_addr_port_lookup/g;
s/parse_addr_port(?=[^_])/addr_port_lookup/g;
s/tor_addr_from_str/tor_addr_parse/g;
This patch leaves aton and pton alone: their naming convention and
behavior is is determined by the sockets API.
More renaming may be needed.
Previously we were using router_get_by_id(foo) to test "do we have a
descriptor that will let us make an anonymous circuit to foo". But
that isn't right for microdescs: we should have been using node_t.
Fixes bug 3601; bugfix on 0.2.3.1-alpha.
All of the routerset_contains*() functions return 0 if their
routerset_t argument is NULL. Therefore, there's no point in
doing "if (ExcludeNodes && routerset_contains*(ExcludeNodes...))",
for example.
This patch fixes every instance of
if (X && routerstatus_contains*(X,...))
Note that there are other patterns that _aren't_ redundant. For
example, we *don't* want to change:
if (EntryNodes && !routerstatus_contains(EntryNodes,...))
Fixes#2797. No bug here; just needless code.
This lets us make a lot of other stuff const, allows the compiler to
generate (slightly) better code, and will make me get slightly fewer
patches from folks who stick mutable stuff into or_options_t.
const: because not every input is an output!
Original message from bug3393:
check_private_dir() to ensure that ControlSocketsGroupWritable is
safe to use. Unfortunately, check_private_dir() only checks against
the currently running user… which can be root until privileges are
dropped to the user and group configured by the User config option.
The attached patch fixes the issue by adding a new effective_user
argument to check_private_dir() and updating the callers. It might
not be the best way to fix the issue, but it did in my tests.
(Code by lunar; changelog by nickm)
The conflicts were mainly caused by the routerinfo->node transition.
Conflicts:
src/or/circuitbuild.c
src/or/command.c
src/or/connection_edge.c
src/or/directory.c
src/or/dirserv.c
src/or/relay.c
src/or/rendservice.c
src/or/routerlist.c
This patch introduces a few new functions in router.c to produce a
more helpful description of a node than its nickame, and then tweaks
nearly all log messages taking a nickname as an argument to call these
functions instead.
There are a few cases where I left the old log messages alone: in
these cases, the nickname was that of an authority (whose nicknames
are useful and unique), or the message already included an identity
and/or an address. I might have missed a couple more too.
This is a fix for bug 3045.
Conflicts in various places, mainly node-related. Resolved them in
favor of HEAD, with copying of tor_mem* operations from bug3122_memcmp_022.
src/common/Makefile.am
src/or/circuitlist.c
src/or/connection_edge.c
src/or/directory.c
src/or/microdesc.c
src/or/networkstatus.c
src/or/router.c
src/or/routerlist.c
src/test/test_util.c
Conflicts throughout. All resolved in favor of taking HEAD and
adding tor_mem* or fast_mem* ops as appropriate.
src/common/Makefile.am
src/or/circuitbuild.c
src/or/directory.c
src/or/dirserv.c
src/or/dirvote.c
src/or/networkstatus.c
src/or/rendclient.c
src/or/rendservice.c
src/or/router.c
src/or/routerlist.c
src/or/routerparse.c
src/or/test.c
Here I looked at the results of the automated conversion and cleaned
them up as follows:
If there was a tor_memcmp or tor_memeq that was in fact "safe"[*] I
changed it to a fast_memcmp or fast_memeq.
Otherwise if there was a tor_memcmp that could turn into a
tor_memneq or tor_memeq, I converted it.
This wants close attention.
[*] I'm erring on the side of caution here, and leaving some things
as tor_memcmp that could in my opinion use the data-dependent
fast_memcmp variant.
Resolved conflicts in:
doc/tor.1.txt
src/or/circuitbuild.c
src/or/circuituse.c
src/or/connection_edge.c
src/or/connection_edge.h
src/or/directory.c
src/or/rendclient.c
src/or/routerlist.c
src/or/routerlist.h
These were mostly releated to the routerinfo_t->node_t conversion.
This looked at first like another fun way around our node selection
logic: if we had introduction circuits, and we wound up building too
many, we would turn extras into general-purpose circuits. But when we
did so, we wouldn't necessarily check whether the general-purpose
circuits conformed to our node constraints. For example, the last
node could totally be in ExcludedExitNodes and we wouldn't have cared...
...except that the circuit should already be internal, so it won't get user
streams attached to it, so the transition should generally be allowed.
Add an assert to make sure we're right about this, and have it not
check whether ExitNodes is set, since that's irrelevant to internal
circuits.
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
(Backport from 0.2.2's 5ed73e3807)
Our regular DH parameters that we use for circuit and rendezvous
crypto are unchanged. This is yet another small step on the path of
protocol fingerprinting resistance.
Our public key functions assumed that they were always writing into a
large enough buffer. In one case, they weren't.
(Incorporates fixes from sebastian)
A node_t is an abstraction over routerstatus_t, routerinfo_t, and
microdesc_t. It should try to present a consistent interface to all
of them. There should be a node_t for a server whenever there is
* A routerinfo_t for it in the routerlist
* A routerstatus_t in the current_consensus.
(note that a microdesc_t alone isn't enough to make a node_t exist,
since microdescriptors aren't usable on their own.)
There are three ways to get a node_t right now: looking it up by ID,
looking it up by nickname, and iterating over the whole list of
microdescriptors.
All (or nearly all) functions that are supposed to return "a router"
-- especially those used in building connections and circuits --
should return a node_t, not a routerinfo_t or a routerstatus_t.
A node_t should hold all the *mutable* flags about a node. This
patch moves the is_foo flags from routerinfo_t into node_t. The
flags in routerstatus_t remain, but they get set from the consensus
and should not change.
Some other highlights of this patch are:
* Looking up routerinfo and routerstatus by nickname is now
unified and based on the "look up a node by nickname" function.
This tries to look only at the values from current consensus,
and not get confused by the routerinfo_t->is_named flag, which
could get set for other weird reasons. This changes the
behavior of how authorities (when acting as clients) deal with
nodes that have been listed by nickname.
* I tried not to artificially increase the size of the diff here
by moving functions around. As a result, some functions that
now operate on nodes are now in the wrong file -- they should
get moved to nodelist.c once this refactoring settles down.
This moving should happen as part of a patch that moves
functions AND NOTHING ELSE.
* Some old code is now left around inside #if 0/1 blocks, and
should get removed once I've verified that I don't want it
sitting around to see how we used to do things.
There are still some unimplemented functions: these are flagged
with "UNIMPLEMENTED_NODELIST()." I'll work on filling in the
implementation here, piece by piece.
I wish this patch could have been smaller, but there did not seem to
be any piece of it that was independent from the rest. Moving flags
forces many functions that once returned routerinfo_t * to return
node_t *, which forces their friends to change, and so on.
