asan was finding an alignment issue with a cast, so set the field in the
trunnel struct and then encode it instead. Also, enable log capture and
verification.
Checking all of these parameter lists for every single connection every second
seems like it could be an expensive waste.
Updating globally cached versions when there is a new consensus will still
allow us to apply consensus parameter updates to all existing connections
immediately.
IMO, these tests should be calling options_init() to properly set everything
to default values, but when that is done, about a dozen tests fail. Setting
the one default value that broke the tests for my branch. Sorry for being
lame.
This unifies CircuitIdleTimeout and PredictedCircsRelevanceTime into a single
option, and randomizes it.
It also gives us control over the default value as well as relay-to-relay
connection lifespan through the consensus.
Conflicts:
src/or/circuituse.c
src/or/config.c
src/or/main.c
src/test/testing_common.c
This defense will cause Cisco, Juniper, Fortinet, and other routers operating
in the default configuration to collapse netflow records that would normally
be split due to the 15 second flow idle timeout.
Collapsing these records should greatly reduce the utility of default netflow
data for correlation attacks, since all client-side records should become 30
minute chunks of total bytes sent/received, rather than creating multiple
separate records for every webpage load/ssh command interaction/XMPP chat/whatever
else happens to be inactive for more than 15 seconds.
The defense adds consensus parameters to govern the range of timeout values
for sending padding packets, as well as for keeping connections open.
The defense only sends padding when connections are otherwise inactive, and it
does not pad connections used solely for directory traffic at all. By default
it also doesn't pad inter-relay connections.
Statistics on the total padding in the last 24 hours are exported to the
extra-info descriptors.
We need to index diffs by the digest-as-signed of their source
consensus, so that we can find them even from consensuses whose
signatures are encoded differently.
In this patch I add support for "delete through end of file" in our
ed diff handler, and generate our diffs so that they remove
everything after in the consensus after the signatures begin.
test_options_validate_impl() incorrectly executed subsequent phases of
config parsing and validation after an expected error. This caused
msg to leak when those later phases (which would likely produce errors
as well) overwrote it.
This was introduced 90562fc23a adding a code
path where we pass a NULL pointer for the HSDir fingerprint to the control
event subsystem. The HS desc failed function wasn't handling properly that
pointer for a NULL value.
Two unit tests are also added in this commit to make sure we handle properly
the case of a NULL hsdir fingerprint and a NULL content as well.
Fixes#22138
Signed-off-by: David Goulet <dgoulet@torproject.org>
Code movement in the commit introducings tests for #22103 uncovered a
latent memory management bug.
Refactor the log message checking from test_options_checkmsgs() into a
helper test_options_checklog(). This avoids a memory leak (and
possible double-free) in a test failure condition.
Don't reuse variables (especially pointers to allocated memory!) for
multiple unrelated purposes.
Fixes CID 1405778.
Also factor out the error message comparisions from
test_options_validate_impl() into a separate function so it can check
for error messages in different phases of config parsing.
These required some special-casing, since some of the assumption
about real compression algorithms don't actually hold for the
identity transform. Specifically, we had assumed:
- compression functions typically change the lengths of their
inputs.
- decompression functions can detect truncated inputs
- compression functions have detectable headers
None of those is true for the identity transformation.
Introduce a way to optionally enable Rust integration for our builds. No
actual Rust code is added yet and specifying the flag has no effect
other than failing the build if rustc and cargo are unavailable.
There were two issues here: first, zstd didn't exhibit the right
behavior unless it got a very large input. That's fine.
The second issue was a genuine bug, fixed by 39cfaba9e2.
This patch refactors our compression tests such that deflate, gzip,
lzma, and zstd are all tested using the same code.
Additionally we use run-time checks to see if the given compression
method is supported instead of using HAVE_LZMA and HAVE_ZSTD.
See: https://bugs.torproject.org/22085
Since we have a streaming API for each compression backend, we don't
need a non-streaming API for each: we can build a common
non-streaming API at the front-end.
This commit adds the src/trace directory containing the basics for our tracing
subsystem. It is not used in the code base. The "src/trace/debug.h" file
contains an example on how we can map our tor trace events to log_debug().
The tracing subsystem can only be enabled by tracing framework at compile
time. This commit introduces the "--enable-tracing-debug" option that will
make all "tor_trace()" function be maped to "log_debug()".
Closes#13802
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch adds support for checking if a given `compress_method_t` is
supported by the currently running Tor instance using
`tor_compress_supports_method()`.
See: https://bugs.torproject.org/21662
This patch adds support for enabling support for Zstandard to our configure
script. By default, the --enable-zstd option is set to "auto" which means if
libzstd is available we'll build Tor with Zstandard support.
See: https://bugs.torproject.org/21662
This patch adds support for enabling support for LZMA to our configure
script. By default, the --enable-lzma option is set to "auto" which
means if liblzma is available we'll build Tor with LZMA support.
See: https://bugs.torproject.org/21662
The item referred to the cdm_ht_set_status() case where the item was
not already in the hashtable. But that already happens naturally
when we scan the directory on startup... and we already have a test
for that.
This commit adds some helper functions to look up the diff from one
consensus and to make sure that applying it leads to another. Then
we add them throughout the existing test cases. Doing this turned
up a reference-leaking bug in consensus_diff_worker_replyfn.
Initial tests. These just try adding a few consensuses, looking
them up, and making sure that consensus diffs are generated in a
more or less reasonable-looking way. It's enough for 87% coverage,
but it leaves out a lot of functionality.
This patch refactors our streaming compression code to allow us to
extend it with non-zlib/non-gzip based compression schemas.
See https://bugs.torproject.org/21663
To allow us to use the API name `tor_compress` and `tor_uncompress` as
the main entry-point for all compression/uncompression and not just gzip
and zlib.
See https://bugs.torproject.org/21663
This patch changes some of the tt_assert() usage in test_util_gzip() to
use tt_int_op() to get better error messages upon failure.
Additionally we move to use explicit NULL checks.
See https://bugs.torproject.org/21663
The consdiff generation logic would skip over lines added at the start of the
second file, and generate a diff that it would the immediately refuse because
it couldn't be used to reproduce the second file from the first. Fixes#21996.
The reason for making the temporary list public is to keep it encapsulated in
the rendservice subsystem so the prop224 code does not have direct access to
it and can only affect it through the rendservice pruning function.
It also has been modified to not take list as arguments but rather use the
global lists (main and temporary ones) because prop224 code will call it to
actually prune the rendservice's lists. The function does the needed rotation
of pointers between those lists and then prune if needed.
In order to make the unit test work and not completely horrible, there is a
"impl_" version of the function that doesn't free memory, it simply moves
pointers around. It is directly used in the unit test and two setter functions
for those lists' pointer have been added only for unit test.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Now we have separate getters and setters for service-side and relay-side. I
took this approach over adding arguments to the already existing methods to
have more explicit type-checking, and also because some functions would grow
too large and dirty.
This commit also fixes every callsite to use the new function names which
modifies the legacy HS (v2) and the prop224 (v3) code.
Signed-off-by: David Goulet <dgoulet@torproject.org>
One of the goals of this change is to have trunnel API/ABI being more explicit
so we namespace them with "trn_*". Furthermore, we can now create
hs_cells.[ch] without having to confuse it with trunnel which used to be
"hs_cell_*" before that change.
Here are the perl line that were used for this rename:
perl -i -pe 's/cell_extension/trn_cell_extension/g;' src/*/*.[ch]
perl -i -pe 's/cell_extension/trn_cell_extension/g;' src/trunnel/hs/*.trunnel
perl -i -pe 's/hs_cell_/trn_cell_/g;' src/*/*.[ch]
perl -i -pe 's/hs_cell_/trn_cell_/g;' src/trunnel/hs/*.trunnel
And then "./scripts/codegen/run_trunnel.sh" with trunnel commit id
613fb1b98e58504e2b84ef56b1602b6380629043.
Fixes#21919
Signed-off-by: David Goulet <dgoulet@torproject.org>
These tests tried to use ridiculously large buffer sizes to check
the sanity-checking in the code; but since the sanity-checking
changed, these need to change too.
Test base64_decode() with odd sized decoded lengths, including
unpadded encodings and padded encodings with "right-sized" output
buffers. Convert calls to base64_decode_nopad() to base64_decode()
because base64_decode_nopad() is redundant.
Check that route_len_for_purpose() (helper for new_route_len())
correctly fails a non-fatal bug assertion if it encounters an
unhandled circuit purpose when it is called with exit node info.
The old implementation had duplicated code in a bunch of places, and
it interspersed spool-management with resource management. The new
implementation should make it easier to add new resource types and
maintain the spooling code.
Closing ticket 21651.
This patch turns `MIN_ONION_KEY_LIFETIME` into a new function
`get_onion_key_lifetime()` which gets its value from a network consensus
parameter named "onion-key-rotation-days". This allows us to tune the
value at a later point in time with no code modifications.
We also bump the default onion key lifetime from 7 to 28 days as per
proposal #274.
See: https://bugs.torproject.org/21641
This patch fixes a regression described in bug #21757 that first
appeared after commit 6e78ede73f which was an attempt to fix bug #21654.
When switching from buffered I/O to direct file descriptor I/O our
output strings from get_string_from_pipe() might contain newline
characters (\n). In this patch we modify tor_get_lines_from_handle() to
ensure that the function splits the newly read string at the newline
character and thus might return multiple lines from a single call to
get_string_from_pipe().
Additionally, we add a test case to test_util_string_from_pipe() to
ensure that get_string_from_pipe() correctly returns multiple lines in a
single call.
See: https://bugs.torproject.org/21757
See: https://bugs.torproject.org/21654
We could use one of these for holding "junk" descriptors and
unparseable things -- but we'll _need_ it for having cached
consensuses and diffs between them.
Previously, we operated on smartlists of NUL-terminated strings,
which required us to copy both inputs to produce the NUL-terminated
strings. Then we copied parts of _those_ inputs to produce an
output smartlist of NUL-terminated strings. And finally, we
concatenated everything into a final resulting string.
This implementation, instead, uses a pointer-and-extent pattern to
represent each line as a pointer into the original inputs and a
length. These line objects are then added by reference into the
output. No actual bytes are copied from the original strings until
we finally concatenate the final result together.
Bookkeeping structures and newly allocated strings (like ed
commands) are allocated inside a memarea, to avoid needless mallocs
or complicated should-I-free-this-or-not bookkeeping.
In my measurements, this improves CPU performance by something like
18%. The memory savings should be much, much higher.
This takes two fuzzers: one which generates a diff and makes sure it
works, and one which applies a diff.
So far, they won't crash, but there's a bug in my
string-manipulation code someplace that I'm having to work around,
related to the case where you have a blank line at the end of a
file, or where you diff a file with itself.
