These now (or_port and dir_port) now have "find" names, since they
look at the portcfg first, then at the actual ports from the
listeners.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
router_get_advertised_or_port routerconf_find_or_port \
router_get_advertised_ipv6_or_ap routerconf_find_ipv6_or_ap \
router_has_advertised_ipv6_orport routerconf_has_ipv6_orport \
router_get_advertised_dir_port routerconf_find_dir_port
Rationale: these don't actually give the first advertised
address/port, but instead give us the first such port that we are
_configured_ to advertise. Putting them in a portconf_ namespace
therefore makes sense.
Similarly, there are no other functions that get the first
configured advertised addr/port, so the "by_type_af()" part is needless.
This is an automated commit, generated by this command:
./scripts/maint/rename_c_identifier.py \
get_first_advertised_addr_by_type_af portconf_get_first_advertised_addr \
get_first_advertised_port_by_type_af portconf_get_first_advertised_port
This option controls if a tor relay will attempt address auto discovery and
thus ultimately publish an IPv6 ORPort in the descriptor.
Behavior is from proposal 312 section 3.2.6.
Closes#33245
Signed-off-by: David Goulet <dgoulet@torproject.org>
The ORPort can be IPv4Only which means that even if we can auto discover an
IPv6 address, we should not publish it because it would have an ORPort of 0.
Fixes#40054
Signed-off-by: David Goulet <dgoulet@torproject.org>
The need for casting negative syscall arguments depends on the
glibc version. This affects the rules for the openat syscall which
uses the constant AT_FDCWD that is defined as a negative number.
This commit adds logic to only apply the cast when necessary, on
glibc versions from 2.27 onwards.
Different versions of glibc use either open or openat for the
opendir function. This commit adds logic to use the correct rule
for each glibc version, namely:
- Until 2.14 open is used
- From 2.15 to to 2.21 openat is used
- From 2.22 to 2.26 open is used
- From 2.27 onwards openat is used
The need for casting negative syscall arguments depends on the
glibc version. This affects the rules for the openat syscall which
uses the constant AT_FDCWD that is defined as a negative number.
This commit adds logic to only apply the cast when necessary, on
glibc versions from 2.27 onwards.
Dirauth code use the warn log severity when calling find_my_address() which
made it that every time we would find an address, it would log a warning.
These are not needed below info level and thus set them to info level. An IP
change is set to notice by default.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead of a boolean saying "cache_only" add the concept of flags so we add
semantic through out the code and allow ourselves to have more options in the
future.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tell the relay find address interface to only use the cache so we don't
trigger an address resolve everytime the "GETINFO address" is called.
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Previous development introduced the error of using 0/1 for a boolean
parameter. Fix that everywhere
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Remove use of router_pick_published_address() and use
relay_find_addr_to_publish instead.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
At the moment, this command only returns the IPv4. Do so by using the new
relay_find_addr_to_publish().
New commands to return IPv4 and IPv6 will be done with the work in tor#40039.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Use the new relay_has_address_set() interface when deciding if we need to
fetch directory information from an authority as a relay.
If no IPv4 address is found, we'll proceed with a fetch so we can learn our
address in the HTTP header or NETINFO cell that a trusted authority will send
us back.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Tor periodic events have moved to a role base model where relays have specific
events. One of those is to rebuild the descriptor and that is ran every
minute.
This removes the call to router_rebuild_descriptor() from
router_get_my_routerinfo_with_err() because that is the only code path that
can call for a rebuild every second.
Instead, when we mark the descriptor as dirty, immediately reschedule the
descriptor check periodic event so it can be rebuilt that way instead of
randomly when router_get_my_routerinfo_with_err() is called.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
When a relay builds a new descriptor, use the new relay_find_addr_to_publish()
interface to find the address to publish per family.
This commit also make the check for address consistency to also work for a
configured IPv6 for which before it was IPv4 only.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
In case the transport has no usable address configured (likely 0.0.0.0 or
[::]), attempt to find the IPv4 and on failure, fallback to the IPv6. If none
are found, a log error is emitted and the transport is skiped.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
In order for a relay to find which address to publish in its descriptor,
router_pick_published_address() is used. However, that function only supports
AF_INET and uses the directory server suggested address discovery mechanism.
This new function uses a new interface so that the caller can request an
address family and get the tor_addr_t object. Furthermore, it drops the use of
directory servers address discovery (tor#33244) and instead uses the new
suggested cache that is populated at the moment from data in the NETINFO cell
coming from the directory authorities.
At this commit, function is unused.
Related to #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Commit b14b1f2b1d was a mistake.
In case an Address statement is missing for the wanted family but another one
exists for another family, simply continue the address discovery.
It is not a mistake to be missing an Address statement for a family because
the address could simply be discovered by the next methods. Not all address
family requires a specific Address statement.
However, we do bail if we couldn't find any valid address for the requested
family _and_ a resolve failed meaning we had a hostname but couldn't resolve
it. In that case, we can't know if that hostname would have been for v4 or v6
thus we can't continue the address discovery properly.
Couple unit tests case were removed to match this reality.
Related #40025
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead of replacing connection_t.{addr,port} with a canonical
orport, and tracking the truth in real_addr, we now leave
connection_t.addr alone, and put the canonical address in
canonical_orport.
Closes#40042Closes#33898
Our old https://bugs.torproject.org/nnnn URLs only work for bugs
numbered before 40000. Newer gitlab bugs need to have specific
projects mentioned.
This patch assumes that bugs are in tpo/core/tor by default, but
allows us to refer to several other projects by saying
e.g. "chutney#40002" if we want.
(This is not fully general yet: we only pick randomly among
_supported_ addresses, and each extendinfo contains at most one IPv4
address and at most one IPv6 address, no matter what the extend cell
had.)
This change will help dual-stack relays do IPv6 reachability tests,
in theory, by having them sometimes do IPv4 connections and
sometimes do ipv6 connections.
Closes ticket 33220.
