Let's use the same function exit point for BUG() codepath that we're using
for every other exit condition. That way, we're not forgetting to clean up
the memarea.
so that the relays that would be "excluded" from the bandwidth
file because of something failed can be included to diagnose what
failed, without still including these relays in the bandwidth
authorities vote.
Closes#29806.
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
Allow connections to single onion services to remain idle without being
disconnected.
Relays acting as rendezvous points for single onion services were
mistakenly closing idle established rendezvous circuits after 60 seconds,
thinking that they are unused directory-fetching circuits that had served
their purpose.
Fixes bug 29665; bugfix on 0.2.1.26.
Stop leaking parts of the shared random state in the shared-random unit
tests. The previous fix in 29599 was incomplete.
Fixes bug 29706; bugfix on 0.2.9.1-alpha.
Turns out that when reloading a tor configured with hidden service(s), we
weren't copying all the needed information between the old service object to
the new one.
For instance, the desc_is_dirty timestamp wasn't which could lead to the
service uploading its descriptor much later than it would need to.
The replaycache wasn't also moved over and some intro point information as
well.
Fixes#23790
Signed-off-by: David Goulet <dgoulet@torproject.org>
Prior to #23100, we were not counting HS circuit build times in our
calculation of the timeout. This could lead to a condition where our timeout
was set too low, based on non HS circuit build times, and then we would
abandon all HS circuits, storing no valid timeouts in the histogram.
This commit avoids the assert.
When "auto" was used for the port number for a listening socket, the
message logged after opening the socket would incorrectly say port 0
instead of the actual port used.
Fixes bug 29144; bugfix on 0.3.5.1-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
Skip the Appveyor 32-bit Windows Server 2016 job, and 64-bit Windows
Server 2012 R2 job. The remaining 2 jobs still provide coverage of
64/32-bit, and Windows Server 2016/2012 R2.
Also set fast_finish, so failed jobs terminate the build immediately.
Fixes bug 29601; bugfix on 0.3.5.4-alpha.
When IPv4Only (IPv6Only) was used but the address could not be
interpreted as a IPv4 (IPv6) address, the error message referred
to the wrong IP version.
This also fixes up the error-checking logic so it's more precise
about what's being checked.
Fixes bug 13221; bugfix on 0.2.3.9-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
KIST works by computing how much should be allowed to write to the kernel for
a given socket, and then it writes that amount to the outbuf.
The problem is that it could be possible that the outbuf already has lots of
data in it from a previous scheduling round (because the kernel is full/busy
and Tor was not able to flush the outbuf yet). KIST ignores that the outbuf
has been filling (is above its "highwater") and writes more anyway. The end
result is that the outbuf length would exceed INT_MAX, hence causing an
assertion error and a corresponding "Bug()" message to get printed to the
logs.
This commit makes it for KIST to take into account the outbuf length when
computing the available space.
Bug found and patch by Rob Jansen.
Closes#29168. TROVE-2019-001.
Signed-off-by: David Goulet <dgoulet@torproject.org>
malloc_options needs to be declared extern (and declaring it extern
means we need to initialize it separately)
Fixes bug 29145; bugfix on 0.2.9.3-alpha
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
It was looking for object files made with the old automake
directorations, but those changed when we split up our libraries.
Fixes bug 29435; bugfix on 0.3.5.1-alpha.
We log these messages at INFO level, except when we are reading a
private key from a file, in which case we log at WARN.
This fixes a regression from when we re-wrote our PEM code to be
generic between nss and openssl.
Fixes bug 29042, bugfix on 0.3.5.1-alpha.
Stop logging "Tried to establish rendezvous on non-OR circuit..." as
a warning. Instead, log it as a protocol warning, because there is
nothing that relay operators can do to fix it.
Fixes bug 29029; bugfix on 0.2.5.7-rc.
In get_local_listener used by tor_ersatz_socketpair, the address
family used when binding the IPv6 socket was AF_INET instead of
AF_INET6.
Fixes bug 28995; bugfix on 0.3.5.1-alpha.
Signed-off-by: Kris Katterjohn <katterjohn@gmail.com>
In theory it would be better to detect this bug in advance, but this
approach is much simpler, and therefore safer to backport.
This closes tor issue 28973.
Linked connections aren't woken up by libevent due to I/O but rather
artificially so we can, by chunks, empty the spooled object(s).
Commit 5719dfb48f (in 0.3.4.1-alpha) made it
that the schedule_active_linked_connections_event would be only called once at
startup but this is wrong because then we would never go through again the
active linked connections.
Fortunately, everytime a new linked connection is created, the event is
activated and thus we would go through the active list again. On a busy relay,
this issue is mitigated by that but on a slower relays or bridge, a connection
could get stuck for a while until a new directory information request would
show up.
Fixes#28717, #28912
The point of this function is to make sure that the ed25519-based
implementation of curve25519_basepoint() actually works when we
start tor, and use the regular fallback implementation if it
doesn't. But it accounts for 9% of our startup time in the case
when we have directory information, and I think it's safe to make
the test shorter. After all, it has yet to find any actual bugs in
curved25519_scalarmult_basepoint_donna() on any platforms.
Closes ticket 28838.
Add the bootstrap tag name to the log messages, so people
troubleshooting connection problems can look up a symbol instead of a
number. Closes ticket 28731.
Merge Phoul's two lists into teor's list.
Replace the 150 fallbacks originally introduced in Tor 0.3.3.1-alpha in
January 2018 (of which ~115 were still functional), with a list of
157 fallbacks (92 new, 65 existing, 85 removed) generated in
December 2018.
Closes ticket 24803.
Replace the 150 fallbacks originally introduced in Tor 0.3.3.1-alpha in
January 2018 (of which ~115 were still functional), with a list of
148 fallbacks (89 new, 59 existing, 91 removed) generated in
December 2018.
Closes ticket 24803.
When retrying all SOCKS connection because new directory information just
arrived, do not BUG() if a connection in state AP_CONN_STATE_RENDDESC_WAIT is
found to have a usable descriptor.
There is a rare case when this can happen as detailed in #28669 so the right
thing to do is put that connection back in circuit wait state so the
descriptor can be retried.
Fixes#28669
Signed-off-by: David Goulet <dgoulet@torproject.org>
Removing a ".auth" file revokes a client access to the service but the
rendezvous circuit is not closed service side because the service simply
doesn't know which circuit is for which client.
This commit notes in the man page that to fully revoke a client access to the
service, the tor process should be restarted.
Closes#28275
Signed-off-by: David Goulet <dgoulet@torproject.org>
This patch explicitly specifies the path to our OpenSSL dependency and
disables the installation of an external OpenSSL version and instead
uses the OpenSSL version available from the MinGW environments.
See: https://bugs.torproject.org/28574
To succesful compile tor-print-ed-signing-cert.exe on Windows we
sometimes need to include the @TOR_LIB_GDI@ library.
See: https://bugs.torproject.org/28485
By adding a file to the ClientOnionAuthDir and sending a HUP signal, tor would
load the new file and use it. However, that doesn't work with the Sandbox
since post initilization, nothing can be changed.
Document in the manpage that limitation within the Sandbox description.
Closes#28128
Signed-off-by: David Goulet <dgoulet@torproject.org>
Correctly identify Windows 8.1, Windows 10, and Windows Server 2008
and later from their NT versions.
On recent Windows versions, the GetVersionEx() function may report
an earlier Windows version than the running OS. To avoid user
confusion, add "[or later]" to Tor's version string on affected
versions of Windows.
Remove Windows versions that were never supported by the
GetVersionEx() function.
Stop duplicating the latest Windows version in get_uname().
Fixes bug 28096; bugfix on 0.2.2.34; reported by Keifer Bly.
In conn_close_if_marked(), we can decide to keep a connection open that still
has data to flush on the wire if it is being rate limited on the write side.
However, in this process, we were also looking at the read() side which can
still have token in its bucket and thus not stop the reading. This lead to a
BUG() introduced in 0.3.4.1-alpha that was expecting the read side to be
closed due to the rate limit but which only applies on the write side.
This commit removes any bandwidth check on the read side and simply stop the
read side on the connection regardless of the bucket state. If we keep the
connection open to flush it out before close, we should not read anything.
Fixes#27750
Signed-off-by: David Goulet <dgoulet@torproject.org>
Apparently some freebsd compilers can't tell that 'c' will never
be used uninitialized.
Fixes bug 28413; bugfix on 0.2.9.3-alpha when we added support for
longer AES keys to this function.
We don't use this syscall, but openssl apparently does.
(This syscall puts a socket into a half-closed state. Don't worry:
It doesn't shut down the system or anything.)
Fixes bug 28183; bugfix on 0.2.5.1-alpha where the sandbox was
introduced.
Resume refusing to start with relative file paths and RunAsDaemon
set (regression from the fix for bug 22731).
Fixes bug 28298; bugfix on 0.3.3.1-alpha.
If tor terminates due to SIGNAL HALT before test_rebind.py calls
tor_process.terminate(), an OSError 3 (no such process) is thrown.
Fixes part of bug 27968 on 0.3.5.1-alpha.
Remember, you can't check to see if there are N bytes left in a
buffer by doing (buf + N < end), since the buf + N computation might
take you off the end of the buffer and result in undefined behavior.
Fixes 28202; bugfix on 0.2.0.3-alpha.
It is not enough to look at protover for v3 rendezvous support but also we
need to make sure that the curve25519 onion key is present or in other words
that the descriptor has been fetched and does contain it.
Fixes#27797.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Treat backtrace test failures as expected on NetBSD, OpenBSD, and
macOS/Darwin, until we solve bug 17808.
(FreeBSD failures have been treated as expected since 18204 in 0.2.8.)
Fixes bug 27948; bugfix on 0.2.5.2-alpha.
Before this commit, we would create the descriptor signing key certificate
when first building the descriptor.
In some extreme cases, it lead to the expiry of the certificate which triggers
a BUG() when encoding the descriptor before uploading.
Ticket #27838 details a possible scenario in which this can happen. It is an
edge case where tor losts internet connectivity, notices it and closes all
circuits. When it came back up, the HS subsystem noticed that it had no
introduction circuits, created them and tried to upload the descriptor.
However, in the meantime, if tor did lack a live consensus because it is
currently seeking to download one, we would consider that we don't need to
rotate the descriptors leading to using the expired signing key certificate.
That being said, this commit does a bit more to make this process cleaner.
There are a series of things that we need to "refresh" before uploading a
descriptor: signing key cert, intro points and revision counter.
A refresh function is added to deal with all mutable descriptor fields. It in
turn simplified a bit the code surrounding the creation of the plaintext data.
We keep creating the cert when building the descriptor in order to accomodate
the unit tests. However, it is replaced every single time the descriptor is
uploaded.
Fixes#27838
Signed-off-by: David Goulet <dgoulet@torproject.org>
When storing a descriptor in the client cache, if we are about to replace an
existing descriptor, make sure to close every introduction circuits of the old
descriptor so we don't have leftovers lying around.
Ticket 27471 describes a situation where tor is sending an INTRODUCE1 cell on
an introduction circuit for which it doesn't have a matching intro point
object (taken from the descriptor).
The main theory is that, after a new descriptor showed up, the introduction
points changed which led to selecting an introduction circuit not used by the
service anymore thus for which we are unable to find the corresponding
introduction point within the descriptor we just fetched.
Closes#27471.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It won't be used if there are no authorized client configured. We do that so
we can easily support the addition of a client with a HUP signal which allow
us to avoid more complex code path to generate that cookie if we have at least
one client auth and we had none before.
Fixes#27995
Signed-off-by: David Goulet <dgoulet@torproject.org>
Occasionally, key pinning doesn't catch a relay that shares an ed25519
ID with another relay. Log the identity fingerprints and the shared
ed25519 ID when this happens, instead of making a BUG() warning.
Fixes bug 27800; bugfix on 0.3.2.1-alpha.
Commit 488e2b00bf introduced an issue, most
likely introduced by a bad copy paste, that made us stop reading on the
connection if our write bandwidth limit was reached.
The problem is that because "read_blocked_on_bw" was never set, the connection
was never reenabled for reading.
This is most likely the cause of #27813 where bytes were accumulating in the
kernel TCP bufers because tor was not doing reads. Only relays with
RelayBandwidthRate would suffer from this but affecting all relays connecting
to them. And using that tor option is recommended and best practice so many
many relays have it enabled.
Fixes#28089.
It turns out that if _only_ the ControlPort is set and nothing else, tor would
simply not bootstrap and thus not start properly. Commit 67a41b6306
removed that requirement for tor to be considered a "client".
Unfortunately, this made the mainloop enable basically nothing if only the
ControlPort is set in the torrc.
This commit now makes it that we also consider the ControlPort when deciding
if we are a Client or not. It does not revert 67a41b6306 meaning
options_any_client_port_set() stays the same, not looking at the control port.
Fixes#27849.
Signed-off-by: David Goulet <dgoulet@torproject.org>
OpenSolaris apparently doesn't have timeradd(), so we added a
replacement, but we weren't including it here after the big
refactoring in 0.3.5.1-alpha.
Fixes bug 27963; bugfix on 0.3.5.1-alpha.
Various places in our code try to activate these events or check
their status, so we should make sure they're initialized as early as
possible. Fixes bug 27861; bugfix on 0.3.5.1-alpha.
When freeing a configuration object from confparse.c in
dump_config(), we need to call the appropriate higher-level free
function (like or_options_free()) and not just config_free().
This only happens with options (since they're the one where
options_validate allocates extra stuff) and only when running
--dump-config with something other than minimal (since
OPTIONS_DUMP_MINIMAL doesn't hit this code).
Fixes bug 27893; bugfix on 0.3.2.1-alpha.
If a tor client gets a descriptor that it can't decrypt, chances are that the
onion requires client authorization.
If a tor client is configured with client authorization for an onion but
decryption fails, it means that the configured keys aren't working anymore.
In both cases, we'll log notice the former and log warn the latter and the
rest of the decryption errors are now at info level.
Two logs statement have been removed because it was redundant and printing the
fetched descriptor in the logs when 80% of it is encrypted wat not helping.
Fixes#27550
Signed-off-by: David Goulet <dgoulet@torproject.org>
When sending the INTRODUCE1 cell, we acquire the needed data for the cell but
if the RP node_t has invalid data, we'll fail the send and completely kill the
SOCKS connection.
Instead, close the rendezvous circuit and return a transient error meaning
that Tor can recover by selecting a new rendezvous point. We'll also do the
same when we are unable to encode the INTRODUCE1 cell for which at that point,
we'll simply take another shot at a new rendezvous point.
Fixes#27774
Signed-off-by: David Goulet <dgoulet@torproject.org>
The result of CString::into_raw() is not safe to free
with free() except under finicky and fragile circumstances
that we definitely don't meet right now.
This was missed in be583a34a3.
When we close a socket via tor_tls_free(), we previously had no way
for our socket accounting logic to learn about it. This meant that
the socket accounting code would think we had run out of sockets,
and freak out.
Fixes bug 27795; bugfix on 0.3.5.1-alpha.
Client side, when a descriptor is finally fetched and stored in the cache, we
then go over all pending SOCKS request for that descriptor. If it turns out
that the intro points are unusable, we close the first SOCKS request but not
the others for the same .onion.
This commit makes it that we'll close all SOCKS requests so we don't let
hanging the other ones.
It also fixes another bug which is having a SOCKS connection in RENDDESC_WAIT
state but with a descriptor in the cache. At some point, tor will expire the
intro failure cache which will make that descriptor usable again. When
retrying all SOCKS connection (retry_all_socks_conn_waiting_for_desc()), we
won't end up in the code path where we have already the descriptor for a
pending request causing a BUG().
Bottom line is that we should never have pending requests (waiting for a
descriptor) with that descriptor in the cache (even if unusable).
Fixees #27410.
Signed-off-by: David Goulet <dgoulet@torproject.org>
It is not enough to look at protover for v3 rendezvous support but also we
need to make sure that the curve25519 onion key is present or in other words
that the descriptor has been fetched and does contain it.
Fixes#27797.
Signed-off-by: David Goulet <dgoulet@torproject.org>
Instead, have it call a mockable function. We don't want
crypto_strongest_rand() to be mockable, since doing so creates a
type error when we call it from ed25519-donna, which we do not build
in a test mode.
Fixes bug 27728; bugfix on 0.3.5.1-alpha
Use the Travis Homebrew addon to install packages on macOS. The package
list is the same, but the Homebrew addon does not do a `brew update` by
default.
This makes builds faster, at the cost of using slightly older packages.
Implements ticket 27738.
