Merge branch 'bug1789'

changes/bug1789

@@ -0,0 +1,16 @@
+  o Minor features:
+    - Be more generous with how much bandwidth we'd use up (with
+      accounting enabled) before entering "soft hibernation".
+      Previously, we'd hibernate once we'd used up 95% of our
+      allotment.  Now, we use up 95% of our allotment, AND make sure
+      that we have no more than 500MB (or 3 hours of expected traffic,
+      whichever is lower) remaining before we enter soft hibernation.
+
+  o Minor bugfixes:
+    - For bandwidth accounting, calculate our expected bandwidth rate
+      based on the time during which we were active and not in
+      soft-hibernation during the last interval.  Previously, we were
+      also considering the time spent in soft-hibernation.  If this
+      was a long time, we would wind up underestimating our bandwidth
+      by a lot, and skewing our wakeup time towards the start of the
+      accounting interval.  Fixes bug 1789.  Bugfix on 0.0.9pre5.

src/or/config.c

@@ -428,6 +428,9 @@ static config_var_t _state_vars[] = {
   V(AccountingExpectedUsage,          MEMUNIT,  NULL),
   V(AccountingIntervalStart,          ISOTIME,  NULL),
   V(AccountingSecondsActive,          INTERVAL, NULL),
+  V(AccountingSecondsToReachSoftLimit,INTERVAL, NULL),
+  V(AccountingSoftLimitHitAt,         ISOTIME,  NULL),
+  V(AccountingBytesAtSoftLimit,       MEMUNIT,  NULL),
 
   VAR("EntryGuard",              LINELIST_S,  EntryGuards,             NULL),
   VAR("EntryGuardDownSince",     LINELIST_S,  EntryGuards,             NULL),

src/or/hibernate.c

@@ -95,6 +95,13 @@ static uint64_t n_bytes_read_in_interval = 0;
 static uint64_t n_bytes_written_in_interval = 0;
 /** How many seconds have we been running this interval? */
 static uint32_t n_seconds_active_in_interval = 0;
+/** How many seconds were we active in this interval before we hit our soft
+ * limit? */
+static int n_seconds_to_hit_soft_limit = 0;
+/** When in this interval was the soft limit hit. */
+static time_t soft_limit_hit_at = 0;
+/** How many bytes had we read/written when we hit the soft limit? */
+static uint64_t n_bytes_at_soft_limit = 0;
 /** When did this accounting interval start? */
 static time_t interval_start_time = 0;
 /** When will this accounting interval end? */
@@ -374,23 +381,42 @@ configure_accounting(time_t now)
 static void
 update_expected_bandwidth(void)
 {
-  uint64_t used, expected;
-  uint64_t max_configured = (get_options()->BandwidthRate * 60);
+  uint64_t expected;
+  or_options_t *options= get_options();
+  uint64_t max_configured = (options->RelayBandwidthRate > 0 ?
+                             options->RelayBandwidthRate :
+                             options->BandwidthRate) * 60;
 
-  if (n_seconds_active_in_interval < 1800) {
+#define MIN_TIME_FOR_MEASUREMENT (1800)
+
+  if (soft_limit_hit_at > interval_start_time && n_bytes_at_soft_limit &&
+      (soft_limit_hit_at - interval_start_time) > MIN_TIME_FOR_MEASUREMENT) {
+    /* If we hit our soft limit last time, only count the bytes up to that
+     * time. This is a better predictor of our actual bandwidth than
+     * considering the entirety of the last interval, since we likely started
+     * using bytes very slowly once we hit our soft limit. */
+    expected = n_bytes_at_soft_limit /
+      (soft_limit_hit_at - interval_start_time);
+    expected /= 60;
+  } else if (n_seconds_active_in_interval >= MIN_TIME_FOR_MEASUREMENT) {
+    /* Otherwise, we either measured enough time in the last interval but
+     * never hit our soft limit, or we're using a state file from a Tor that
+     * doesn't know to store soft-limit info.  Just take rate at which
+     * we were reading/writing in the last interval as our expected rate.
+     */
+    uint64_t used = MAX(n_bytes_written_in_interval,
+                        n_bytes_read_in_interval);
+    expected = used / (n_seconds_active_in_interval / 60);
+  } else {
     /* If we haven't gotten enough data last interval, set 'expected'
      * to 0.  This will set our wakeup to the start of the interval.
      * Next interval, we'll choose our starting time based on how much
      * we sent this interval.
      */
     expected = 0;
-  } else {
-    used = n_bytes_written_in_interval < n_bytes_read_in_interval ?
-      n_bytes_read_in_interval : n_bytes_written_in_interval;
-    expected = used / (n_seconds_active_in_interval / 60);
-    if (expected > max_configured)
-      expected = max_configured;
   }
+  if (expected > max_configured)
+    expected = max_configured;
   expected_bandwidth_usage = expected;
 }
 
@@ -408,6 +434,9 @@ reset_accounting(time_t now)
   n_bytes_read_in_interval = 0;
   n_bytes_written_in_interval = 0;
   n_seconds_active_in_interval = 0;
+  n_bytes_at_soft_limit = 0;
+  soft_limit_hit_at = 0;
+  n_seconds_to_hit_soft_limit = 0;
 }
 
 /** Return true iff we should save our bandwidth usage to disk. */
@@ -568,6 +597,10 @@ accounting_record_bandwidth_usage(time_t now, or_state_t *state)
   state->AccountingSecondsActive = n_seconds_active_in_interval;
   state->AccountingExpectedUsage = expected_bandwidth_usage;
 
+  state->AccountingSecondsToReachSoftLimit = n_seconds_to_hit_soft_limit;
+  state->AccountingSoftLimitHitAt = soft_limit_hit_at;
+  state->AccountingBytesAtSoftLimit = n_bytes_at_soft_limit;
+
   or_state_mark_dirty(state,
                       now+(get_options()->AvoidDiskWrites ? 7200 : 60));
 
@@ -591,10 +624,6 @@ read_bandwidth_usage(void)
   if (!state)
     return -1;
 
-  /* Okay; it looks like the state file is more up-to-date than the
-   * bw_accounting file, or the bw_accounting file is nonexistent,
-   * or the bw_accounting file is corrupt.
-   */
   log_info(LD_ACCT, "Reading bandwidth accounting data from state file");
   n_bytes_read_in_interval = state->AccountingBytesReadInInterval;
   n_bytes_written_in_interval = state->AccountingBytesWrittenInInterval;
@@ -602,6 +631,21 @@ read_bandwidth_usage(void)
   interval_start_time = state->AccountingIntervalStart;
   expected_bandwidth_usage = state->AccountingExpectedUsage;
 
+  /* Older versions of Tor (before 0.2.2.17-alpha or so) didn't generate these
+   * fields. If you switch back and forth, you might get an
+   * AccountingSoftLimitHitAt value from long before the most recent
+   * interval_start_time.  If that's so, then ignore the softlimit-related
+   * values. */
+  if (state->AccountingSoftLimitHitAt > interval_start_time) {
+    soft_limit_hit_at =  state->AccountingSoftLimitHitAt;
+    n_bytes_at_soft_limit = state->AccountingBytesAtSoftLimit;
+    n_seconds_to_hit_soft_limit = state->AccountingSecondsToReachSoftLimit;
+  } else {
+    soft_limit_hit_at = 0;
+    n_bytes_at_soft_limit = 0;
+    n_seconds_to_hit_soft_limit = 0;
+  }
+
   {
     char tbuf1[ISO_TIME_LEN+1];
     char tbuf2[ISO_TIME_LEN+1];
@@ -641,8 +685,27 @@ hibernate_hard_limit_reached(void)
 static int
 hibernate_soft_limit_reached(void)
 {
-  uint64_t soft_limit = DBL_TO_U64(U64_TO_DBL(get_options()->AccountingMax)
-                                   * .95);
+  const uint64_t acct_max = get_options()->AccountingMax;
+#define SOFT_LIM_PCT (.95)
+#define SOFT_LIM_BYTES (500*1024*1024)
+#define SOFT_LIM_MINUTES (3*60)
+  /* The 'soft limit' is a fair bit more complicated now than once it was.
+   * We want to stop accepting connections when ALL of the following are true:
+   *   - We expect to use up the remaining bytes in under 3 hours
+   *   - We have used up 95% of our bytes.
+   *   - We have less than 500MB of bytes left.
+   */
+  uint64_t soft_limit = DBL_TO_U64(U64_TO_DBL(acct_max) * SOFT_LIM_PCT);
+  if (acct_max > SOFT_LIM_BYTES && acct_max - SOFT_LIM_BYTES > soft_limit) {
+    soft_limit = acct_max - SOFT_LIM_BYTES;
+  }
+  if (expected_bandwidth_usage) {
+    const uint64_t expected_usage =
+      expected_bandwidth_usage * SOFT_LIM_MINUTES;
+    if (acct_max > expected_usage && acct_max - expected_usage > soft_limit)
+      soft_limit = acct_max - expected_usage;
+  }
+
   if (!soft_limit)
     return 0;
   return n_bytes_read_in_interval >= soft_limit
@@ -667,6 +730,14 @@ hibernate_begin(hibernate_state_t new_state, time_t now)
     exit(0);
   }
 
+  if (new_state == HIBERNATE_STATE_LOWBANDWIDTH &&
+      hibernate_state == HIBERNATE_STATE_LIVE) {
+    soft_limit_hit_at = now;
+    n_seconds_to_hit_soft_limit = n_seconds_active_in_interval;
+    n_bytes_at_soft_limit = MAX(n_bytes_read_in_interval,
+                                n_bytes_written_in_interval);
+  }
+
   /* close listeners. leave control listener(s). */
   while ((conn = connection_get_by_type(CONN_TYPE_OR_LISTENER)) ||
          (conn = connection_get_by_type(CONN_TYPE_AP_LISTENER)) ||

src/or/or.h

@@ -2831,6 +2831,9 @@ typedef struct {
   uint64_t AccountingBytesReadInInterval;
   uint64_t AccountingBytesWrittenInInterval;
   int AccountingSecondsActive;
+  int AccountingSecondsToReachSoftLimit;
+  time_t AccountingSoftLimitHitAt;
+  uint64_t AccountingBytesAtSoftLimit;
   uint64_t AccountingExpectedUsage;
 
   /** A list of Entry Guard-related configuration lines. */