tor/doc/control-spec.txt

$Id$

                            TC: A Tor control protocol

0. Scope

This document describes an implementation-specific protocol that is used
for other programs (such as frontend user-interfaces) to communicate
with a locally running Tor process.  It is not part of the Tor onion
routing protocol.

We're trying to be pretty extensible here, but not infinitely
forward-compatible.

1. Protocol outline

TC is a bidirectional message-based protocol.  It assumes an underlying
stream for communication between a controlling process (the "client") and
a Tor process (the "server").  The stream may be implemented via TCP,
TLS-over-TCP, a Unix-domain socket, or so on, but it must provide
reliable in-order delivery.  For security, the stream should not be
accessible by untrusted parties.

In TC, the client and server send typed variable-length messages to each
other over the underlying stream.  By default, all messages from the server
are in response to messages from the client.  Some client requests, however,
will cause the server to send messages to the client indefinitely far into
the future.

Servers respond to messages in the order they're received.

2. Message format

The messages take the following format:

   Length [2 octets; big-endian]
   Type   [2 octets; big-endian]
   Body   [Length octets]

Upon encountering a recognized Type, implementations behave as described in
section 3 below.  If the type is not recognized, servers respond with a
"STAT" message (code UNRECOGNIZED; see 3.1 below), and clients simply ignore
the message.

3. Message types

3.1. ERROR (Type 0x0000)

  Sent in response to a message that could not be processed as requested.

  The body of the message begins with a 2-byte error code.  The following
  values are defined:

        0x0000 Unspecified error
               []

        0x0001 Internal error
               [Something went wrong inside Tor, so that the client's
                request couldn't be fulfilled.]

        0x0002 Unrecognized message type
               [The client sent a message type we don't understand.]

        0x0003 Syntax error
               [The client sent a message body in a format we can't parse.]

        0x0004 Unrecognized configuration key
               [The client tried to get or set a configuration option we don't
                recognize.]

        0x0005 Invalid configuration value
               [The client tried to set a configuration option to an
                incorrect, ill-formed, or impossible value.]

        0x0006 Unrecognized byte code
               [The client tried to set a byte code (in the body) that
                we don't recognize.]

        0x0007 Unauthorized.
               [The client tried to send a command that requires
                authorization, but it hasn't sent a valid AUTHENTICATE message.]

        0x0008 Failed authentication attempt
               [The client sent a well-formed authorization message.]

  The rest of the body should be a human-readable description of the error.

  In general, new error codes should only be added when they don't fall under
  one of the existing error codes.

3.2. DONE (Type 0x0001)

  Sent from server to client in response to a request that was successfully
  completed, with no more information needed.  The body is empty.

3.3. SETCONF (Type 0x0002)

  Change the value of a configuration variable. The body contains a list of
  newline-terminated key-value configuration lines.
  The server behaves as though it had just read the key-value pair in its
  configuration file.

  The server responds with a DONE message on success, or an ERROR message on
  failure.

  When a configuration options takes multiple values, or when multiple
  configuration keys form a context-sensitive group (see below), then
  setting _any_ of the options in a SETCONF command is taken to reset all of
  the others.  For example, if two ORBindAddress values are configured,
  and a SETCONF command arrives containing a single ORBindAddress value, the
  new command's value replaces the two old values.

  To _remove_ all settings for a given option entirely (and go back to its
  default value), send a single line containing the key and no value.

3.4. GETCONF (Type 0x0003)

  Request the value of a configuration variable.  The body contains one or
  more NL-terminated strings for configuration keys.  The server replies
  with a CONFVALUE message.

  If an option appears multiple times in the configuration, all of its
  key-value pairs are returned in order.

  Some options are context-sensitive, and depend on other options with
  different keywords.  These cannot be fetched directly.  Currently there
  is only one such option: clients should use the "HiddenServiceOptions"
  virtual keyword to get all HiddenServiceDir, HiddenServicePort,
  HiddenServiceNodes, and HiddenServiceExcludeNodes option settings.

3.5. CONFVALUE (Type 0x0004)

  Sent in response to a GETCONF message; contains a list of "Key Value\n"
  (A non-whitespace keyword, a single space, a non-NL value, a NL)
  strings.

3.6. SETEVENTS (Type 0x0005)

  Request the server to inform the client about interesting events.
  The body contains a list of 2-byte event codes (see "event" below).
  Sending SETEVENTS with an empty body turns off all event reporting.

  The server responds with a DONE message on success, and an ERROR message
  if one of the event codes isn't recognized.  (On error, the list of active
  event codes isn't changed.)

3.7. EVENT (Type 0x0006)

  Sent from the server to the client when an event has occurred and the
  client has requested that kind of event.  The body contains a 2-byte
  event code followed by additional event-dependent information.  Event
  codes are:
      0x0001 -- Circuit status changed

                Status [1 octet]
                   (Launched=0,Built=1,Extended=2,Failed=3,Closed=4)
                Circuit ID [4 octets]
                   (Must be unique to Tor process/time)
                Path [NUL-terminated comma-separated string]
                   (For extended/failed, is the portion of the path that is
                   built)

      0x0002 -- Stream status changed

                Status [1 octet]
                   (Sent connect=0,sent resolve=1,succeeded=2,failed=3,
                    closed=4)
                Stream ID [4 octets]
                   (Must be unique to Tor process/time)
                Target (NUL-terminated address-port string]

      0x0003 -- OR Connection status changed

                Status [1 octet]
                   (Launched=0,connected=1,failed=2,closed=3)
                OR nickname/identity [NUL-terminated]

      0x0004 -- Bandwidth used in the last second

                Bytes read [4 octets]
                Bytes written [4 octets]

      0x0005 -- Notice/warning/error occurred

                Message [NUL-terminated]

3.8. AUTHENTICATE (Type 0x0007)

  Sent from the client to the server.  Contains a 'magic cookie' to prove
  that client is really the admin for this Tor process.  The server responds
  with DONE or ERROR.

3.9. SAVECONF (Type 0x0008)

  Sent from the client to the server. Instructs the server to write out
  its config options into its torrc. Server returns DONE if successful, or
  ERROR if it can't write the file or some other error occurs.

3.10. SIGNAL (Type 0x0009)

  Sent from the client to the server. The body contains one byte that
  indicates the action the client wishes the server to take.

      0x01 -- Reload: reload config items, refetch directory.
      0x02 -- Controlled shutdown: if server is an OP, exit immediately.
              If it's an OR, close listeners and exit after 30 seconds.
      0x10 -- Dump stats: log information about open connections and
              circuits.
      0x12 -- Debug: switch all open logs to loglevel debug.
      0x15 -- Immediate shutdown: clean up and exit now.

  The server responds with DONE if the signal is recognized (or simply
  closes the socket if it was asked to close immediately), else ERROR.

4. Implementation notes

4.1. There are four ways we could authenticate, for now:

 1) Listen on 127.0.0.1; trust all local users.

 2) Write a named socket in tor's data-directory or in some other location;
    rely on the OS to ensure that only authorized users can open it.  (NOTE:
    the Linux unix(7) man page suggests that some BSDs don't enforce
    authorization.)  If the OS has named sockets, and implements
    authentication, trust all users who can read Tor's data directory.

 3) Write a random magic cookie to the FS in Tor's data-directory; use that
    magic cookie for authentication.  Trust all users who can read Tor's data
    directory.

 4) Store a salted-and-hashed passphrase in Tor's configuration.  Use the
    passphrase for authentication.  Trust all users who know the passphrase.

  On Win32, our only options are 1, 3, and 4.  Since the semantics for 2
  and 3 are so similar, we chose to not support 2, and just always bind
  on 127.0.0.1.  We've implemented 1, 3, and 4.

  By default, the Tor client accepts authentication approach #1. If
  the controller wants Tor to demand more authentication, it should use
  setconf and saveconf to configure Tor to demand more next time.

4.2. Don't let the buffer get too big.

  If you ask for lots of events, and 16MB of them queue up on the buffer,
  the Tor process will close the socket.