tor/doc/HACKING/ReleasingTor.md

252 lines
9.3 KiB
Markdown
Raw Normal View History

# Putting out a new release
Here are the steps that the maintainer should take when putting out a
new Tor release:
## 0. Preliminaries
1. Get at least two of weasel/arma/Sebastian to put the new
2017-09-18 20:49:06 +02:00
version number in their approved versions list. Give them a few
days to do this if you can.
2. If this is going to be an important security release, give the packagers
some advance warning: See this list of packagers in IV.3 below.
3. Given the release date for Tor, ask the TB team about the likely release
date of a TB that contains it. See note below in "commit, upload,
announce".
## I. Make sure it works
1. Make sure that CI passes: have a look at Travis
(https://travis-ci.org/torproject/tor/branches), Appveyor
(https://ci.appveyor.com/project/torproject/tor/history), and
Jenkins (https://jenkins.torproject.org/view/tor/).
Make sure you're looking at the right branches.
2015-11-05 15:53:05 +01:00
If there are any unexplained failures, try to fix them or figure them
out.
2. Verify that there are no big outstanding issues. You might find such
issues --
* On Trac
* On coverity scan
* On OSS-Fuzz
2017-09-18 20:49:06 +02:00
3. Run checks that aren't covered above, including:
* clang scan-build. (See the script in ./scripts/test/scan_build.sh)
* make test-network and make test-network-all (with
2019-06-05 21:38:25 +02:00
--enable-fragile-hardening)
* Running Tor yourself and making sure that it actually works for you.
2019-06-05 21:38:25 +02:00
* Running Tor under valgrind. (Our 'fragile hardening' doesn't cover
libevent and openssl, so using valgrind will sometimes find extra
memory leaks.)
## II. Write a changelog
2017-09-18 20:49:06 +02:00
1a. (Alpha release variant)
Gather the `changes/*` files into a changelog entry, rewriting many
2015-11-05 15:13:53 +01:00
of them and reordering to focus on what users and funders would find
interesting and understandable.
To do this, run
`./scripts/maint/sortChanges.py changes/* > changelog.in`
to combine headings and sort the entries. Copy the changelog.in file
into the ChangeLog. Run 'format_changelog.py' (see below) to clean
up the line breaks.
After that, it's time to hand-edit and fix the issues that
lintChanges can't find:
1. Within each section, sort by "version it's a bugfix on", else by
numerical ticket order.
2. Clean them up:
2015-11-05 15:13:53 +01:00
Make stuff very terse
2015-11-05 15:13:53 +01:00
Describe the user-visible problem right away
2015-11-05 15:13:53 +01:00
Mention relevant config options by name. If they're rare or unusual,
remind people what they're for
2015-11-05 15:13:53 +01:00
Avoid starting lines with open-paren
2015-11-05 15:13:53 +01:00
Present and imperative tense: not past.
"Relays", not "servers" or "nodes" or "Tor relays".
"Onion services", not "hidden services".
2015-11-05 15:13:53 +01:00
"Stop FOOing", not "Fix a bug where we would FOO".
2015-11-05 15:13:53 +01:00
Try not to let any given section be longer than about a page. Break up
long sections into subsections by some sort of common subtopic. This
guideline is especially important when organizing Release Notes for
new stable releases.
2015-11-05 15:13:53 +01:00
If a given changes stanza showed up in a different release (e.g.
maint-0.2.1), be sure to make the stanzas identical (so people can
distinguish if these are the same change).
2015-11-05 15:53:05 +01:00
3. Clean everything one last time.
4. Run `./scripts/maint/format_changelog.py --inplace` to make it prettier
2017-09-18 20:49:06 +02:00
1b. (old-stable release variant)
For stable releases that backport things from later, we try to compose
their releases, we try to make sure that we keep the changelog entries
identical to their original versions, with a "backport from 0.x.y.z"
2017-09-18 20:49:06 +02:00
note added to each section. So in this case, once you have the items
from the changes files copied together, don't use them to build a new
changelog: instead, look up the corrected versions that were merged
into ChangeLog in the master branch, and use those.
Add "backport from X.Y.Z" in the section header for these entries.
2. Compose a short release blurb to highlight the user-facing
2015-11-05 15:13:53 +01:00
changes. Insert said release blurb into the ChangeLog stanza. If it's
a stable release, add it to the ReleaseNotes file too. If we're adding
to a release-* branch, manually commit the changelogs to the later
2015-11-05 15:13:53 +01:00
git branches too.
3. If there are changes that require or suggest operator intervention
before or during the update, mail operators (either dirauth or relays
list) with a headline that indicates that an action is required or
appreciated.
4. If you're doing the first stable release in a series, you need to
2015-11-05 15:46:40 +01:00
create a ReleaseNotes for the series as a whole. To get started
there, copy all of the Changelog entries from the series into a new
file, and run `./scripts/maint/sortChanges.py` on it. That will
group them by category. Then kill every bugfix entry for fixing
bugs that were introduced within that release series; those aren't
relevant changes since the last series. At that point, it's time
to start sorting and condensing entries. (Generally, we don't edit the
text of existing entries, though.)
## III. Making the source release.
1. In `maint-0.?.x`, bump the version number in `configure.ac` and run
`make update-versions` to update version numbers in other
places, and commit. Then merge `maint-0.?.x` into `release-0.?.x`.
When you merge the maint branch forward to the next maint branch, or into
master, merge it with "-s ours" to avoid a needless version bump.
2. Make distcheck, put the tarball up in somewhere (how about your
homedir on your homedir on people.torproject.org?) , and tell `#tor-dev`
about it.
If you want, wait until at least one person has built it
successfully. (We used to say "wait for others to test it", but our
CI has successfully caught these kinds of errors for the last several
years.)
3. Make sure that the new version is recommended in the latest consensus.
(Otherwise, users will get confused when it complains to them
about its status.)
If it is not, you'll need to poke Roger, Weasel, and Sebastian again: see
item 0.1 at the start of this document.
## IV. Commit, upload, announce
1. Sign the tarball, then sign and push the git tag:
2015-11-05 15:53:05 +01:00
2015-11-05 15:13:53 +01:00
gpg -ba <the_tarball>
git tag -s tor-0.4.x.y-<status>
git push origin tag tor-0.4.x.y-<status>
(You must do this before you update the website: the website scripts
rely on finding the version by tag.)
(If your default PGP key is not the one you want to sign with, then say
"-u <keyid>" instead of "-s".)
2. scp the tarball and its sig to the dist website, i.e.
`/srv/dist-master.torproject.org/htdocs/` on dist-master. Run
"static-update-component dist.torproject.org" on dist-master.
2015-11-05 15:53:05 +01:00
In the webwml.git repository, `include/versions.wmi` and `Makefile`.
In the project/web/tpo.git repository, update `databags/versions.ini`
to note the new version. Push these changes to master.
(NOTE: Due to #17805, there can only be one stable version listed at
once. Nonetheless, do not call your version "alpha" if it is stable,
or people will get confused.)
(NOTE: It will take a while for the website update scripts to update
the website.)
3. Email the packagers (cc'ing tor-team) that a new tarball is up.
The current list of packagers is:
2015-11-05 15:53:05 +01:00
2020-01-23 14:55:55 +01:00
- {weasel,sysrqb,mikeperry} at torproject dot org
2015-11-05 15:13:53 +01:00
- {blueness} at gentoo dot org
- {paul} at invizbox dot io
- {vincent} at invizbox dot com
2015-11-05 15:13:53 +01:00
- {lfleischer} at archlinux dot org
- {Nathan} at freitas dot net
- {mike} at tig dot as
- {tails-rm} at boum dot org
- {simon} at sdeziel.info
- {yuri} at freebsd.org
- {mh+tor} at scrit.ch
2015-11-05 15:13:53 +01:00
Also, email tor-packagers@lists.torproject.org.
Mention where to download the tarball (https://dist.torproject.org).
Include a link to the changelog.
4. Add the version number to Trac. To do this, go to Trac, log in,
2015-11-05 15:13:53 +01:00
select "Admin" near the top of the screen, then select "Versions" from
the menu on the left. At the right, there will be an "Add version"
box. By convention, we enter the version in the form "Tor:
0.4.0.1-alpha" (or whatever the version is), and we select the date as
2015-11-05 15:13:53 +01:00
the date in the ChangeLog.
5. Wait for the download page to be updated. (If you don't do this before you
announce, people will be confused.)
6. Mail the release blurb and ChangeLog to tor-talk (development release) or
tor-announce (stable).
2015-11-05 15:13:53 +01:00
2017-09-18 20:49:06 +02:00
Post the changelog on the blog as well. You can generate a
blog-formatted version of the changelog with
`./scripts/maint/format_changelog.py --B`
When you post, include an estimate of when the next TorBrowser
releases will come out that include this Tor release. This will
usually track https://wiki.mozilla.org/RapidRelease/Calendar , but it
can vary.
2015-11-05 15:13:53 +01:00
For templates to use when announcing, see:
https://trac.torproject.org/projects/tor/wiki/org/teams/NetworkTeam/AnnouncementTemplates
## V. Aftermath and cleanup
1. If it's a stable release, bump the version number in the
`maint-x.y.z` branch to "newversion-dev", and do a `merge -s ours`
merge to avoid taking that change into master.
2. If there is a new `maint-x.y.z` branch, create a Travis CI cron job that
builds the release every week. (It's ok to skip the weekly build if the
branch was updated in the last 24 hours.)
3. Forward-port the ChangeLog (and ReleaseNotes if appropriate) to the
master branch.
4. Keep an eye on the blog post, to moderate comments and answer questions.