tor/contrib/linux-tor-prio.sh

129 lines
4.1 KiB
Bash
Raw Normal View History

#!/bin/bash
2007-08-19 23:05:08 +02:00
# Written by Mike Perry
# Based on instructions from Dan Singletary's ADSL Bandwidth Management HOWTO
# http://www.faqs.org/docs/Linux-HOWTO/ADSL-Bandwidth-Management-HOWTO.html
2007-08-19 23:05:08 +02:00
# This script is Public Domain.
# The following configuration works well for a ~5Mbit tor node. It requires
2007-08-19 23:05:08 +02:00
# that you place your Tor traffic on a separate IP from the rest of your
# traffic.
# BEGIN DEVICE PARAMETERS
DEV=eth0
2007-08-19 23:05:08 +02:00
BOX_IP=42.42.42.42
TOR_IP=43.43.43.43
# Average ping to most places on the net, milliseconds
RTT_LATENCY=40
# END DEVICE PARAMETERS
# BEGIN UPLOAD PARAMETERS
# RATE_UP must be less than your connection's upload capacity. If it is
# larger, then the bottleneck will be at your router's queue, which you
# do not control. This will cause congestion and a revert to normal TCP
# fairness no matter what the queing priority is.
RATE_UP=5000
2007-08-19 23:05:08 +02:00
# RATE_UP_TOR is the minimum speed your Tor connections will have.
# They will have at least this much bandwidth for upload
RATE_UP_TOR=1500
# RATE_UP_TOR_CEIL is the maximum rate allowed for all Tor trafic
RATE_UP_TOR_CEIL=5000
CHAIN=OUTPUT
#CHAIN=PREROUTING
#CHAIN=POSTROUTING
# END UPLOAD PARAMETERS
MTU=1500
AVG_PKT=900
# END USER TUNABLE PARAMETERS
# The queue size should be no larger than your bandwidth-delay
# product. This is RT latency*bandwidth/MTU/2
2007-08-19 23:05:08 +02:00
BDP=$(expr $RTT_LATENCY \* $RATE_UP / $AVG_PKT)
# Further research indicates that the BDP calculations should use
# RTT/sqrt(n) where n is the expected number of active connections..
BDP=$(expr $BDP / 4)
if [ "$1" = "status" ]
then
echo "[qdisc]"
tc -s qdisc show dev $DEV
tc -s qdisc show dev imq0
echo "[class]"
tc -s class show dev $DEV
tc -s class show dev imq0
echo "[filter]"
tc -s filter show dev $DEV
tc -s filter show dev imq0
echo "[iptables]"
iptables -t mangle -L TORSHAPER-OUT -v -x 2> /dev/null
exit
fi
# Reset everything to a known state (cleared)
tc qdisc del dev $DEV root 2> /dev/null > /dev/null
tc qdisc del dev imq0 root 2> /dev/null > /dev/null
iptables -t mangle -D POSTROUTING -o $DEV -j TORSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -D PREROUTING -o $DEV -j TORSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -D OUTPUT -o $DEV -j TORSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -F TORSHAPER-OUT 2> /dev/null > /dev/null
iptables -t mangle -X TORSHAPER-OUT 2> /dev/null > /dev/null
ip link set imq0 down 2> /dev/null > /dev/null
rmmod imq 2> /dev/null > /dev/null
2007-08-19 23:05:08 +02:00
if [ "$1" = "stop" ]
then
echo "Shaping removed on $DEV."
exit
fi
# Outbound Shaping (limits total bandwidth to RATE_UP)
ip link set dev $DEV qlen $BDP
# Add HTB root qdisc, default is high prio
tc qdisc add dev $DEV root handle 1: htb default 20
# Add main rate limit class
tc class add dev $DEV parent 1: classid 1:1 htb rate ${RATE_UP}kbit
# Create the two classes, giving Tor at least RATE_UP_TOR kbit and capping
# total upstream at RATE_UP so the queue is under our control.
tc class add dev $DEV parent 1:1 classid 1:20 htb rate $(expr $RATE_UP - $RATE_UP_TOR)kbit ceil ${RATE_UP}kbit prio 0
tc class add dev $DEV parent 1:1 classid 1:21 htb rate $[$RATE_UP_TOR]kbit ceil ${RATE_UP_TOR_CEIL}kbit prio 10
# Start up pfifo
tc qdisc add dev $DEV parent 1:20 handle 20: pfifo limit $BDP
tc qdisc add dev $DEV parent 1:21 handle 21: pfifo limit $BDP
# filter traffic into classes by fwmark
tc filter add dev $DEV parent 1:0 prio 0 protocol ip handle 20 fw flowid 1:20
tc filter add dev $DEV parent 1:0 prio 0 protocol ip handle 21 fw flowid 1:21
# add TORSHAPER-OUT chain to the mangle table in iptables
iptables -t mangle -N TORSHAPER-OUT
iptables -t mangle -I $CHAIN -o $DEV -j TORSHAPER-OUT
# Set firewall marks
# Low priority to Tor IP
iptables -t mangle -A TORSHAPER-OUT -s $TOR_IP -j MARK --set-mark 21
# High prio for everything else
# Don't bother to use BOX_IP. Box probably has other IPs too...
2007-08-19 23:05:08 +02:00
#iptables -t mangle -A TORSHAPER-OUT -s $BOX_IP -j MARK --set-mark 20
iptables -t mangle -A TORSHAPER-OUT -m mark --mark 0 -j MARK --set-mark 20
echo "Outbound shaping added to $DEV. Rate for Tor upload at least: ${RATE_UP_TOR}Kbyte/sec."
2007-08-19 23:05:08 +02:00