Resetting the timer after shutdown was initiated would keep
a reference to the object inside ASIO, which would keep the
connection alive until the timer timed out
The problem actually exists in two parts:
1. When sending chunks over a connection, if the queue size is
greater than N, the seed is predictable across every monero node.
>"If rand() is used before any calls to srand(), rand() behaves as if
it was seeded with srand(1). Each time rand() is seeded with the same seed, it
must produce the same sequence of values."
2. The CID speaks for itself: "'rand' should not be used for security-related
applications, because linear congruential algorithms are too easy to break."
*But* this is an area of contention.
One could argue that a CSPRNG is warranted in order to fully mitigate any
potential timing attacks based on crafting chunk responses. Others could argue
that the existing LCG, or even an MTG, would suffice (if properly seeded). As a
compromise, I've used an MTG with a full bit space. This should give a healthy
balance of security and speed without relying on the existing crypto library
(which I'm told might break on some systems since epee is not (shouldn't be)
dependent upon the existing crypto library).
bdcdb0e Remove unused code under WINDWOS_PLATFORM guard (tomsmeding)
a84aa04 syncobj.h no longer defines shared_guard, so remove those define's (tomsmeding)
The removed preprocessor macro's refer to types that are not defined in
the file anymore; the only other place where shared_guard is defined is
in winobj.h, which also defines the same macro's. Therefore, this change
is safe.
(Side note is that these macro's weren't used at all anyway, but that is
orthogonal to the issue.)
fcbf7b3 p2p: propagate out peers limit to payload handler (moneromooo-monero)
098aadf p2p: close the right number of connections on setting max in/out peers (moneromooo-monero)
new cli options (RPC ones also apply to wallet):
--p2p-bind-ipv6-address (default = "::")
--p2p-bind-port-ipv6 (default same as ipv4 port for given nettype)
--rpc-bind-ipv6-address (default = "::1")
--p2p-use-ipv6 (default false)
--rpc-use-ipv6 (default false)
--p2p-require-ipv4 (default true, if ipv4 bind fails and this is
true, will not continue even if ipv6 bind
successful)
--rpc-require-ipv4 (default true, description as above)
ipv6 addresses are to be specified as "[xx:xx:xx::xx:xx]:port" except
in the cases of the cli args for bind address. For those the square
braces can be omitted.
add two RSA based ciphers for Windows/depends compatibility
also enforce server cipher ordering
also set ECDH to auto because vtnerd says it is good :)
When built with the depends system, openssl does not include any
cipher on the current whitelist, so add this one, which fixes the
problem, and does seem sensible.
It can allocate a lot when getting a lot of connections
(in particular, the stress test on windows apparently pushes
that memory to actual use, rather than just allocated)
When closing connections due to exiting, the IO service is
already gone, so the data exchange needed for a gracious SSL
shutdown cannot happen. We just close the socket in that case.
An override for the wallet to daemon connection is provided, but not for
other SSL contexts. The intent is to prevent users from supplying a
system CA as the "user" whitelisted certificate, which is less secure
since the key is controlled by a third party.
This allows "chain" certificates to be used with the fingerprint
whitelist option. A user can get a system-ca signature as backup while
clients explicitly whitelist the server certificate. The user specified
CA can also be combined with fingerprint whitelisting.
The former has the same behavior with single self signed certificates
while allowing the server to have separate short-term authentication
keys with long-term authorization keys.
If the verification mode is `system_ca`, clients will now do hostname
verification. Thus, only certificates from expected hostnames are
allowed when SSL is enabled. This can be overridden by forcible setting
the SSL mode to autodetect.
Clients will also send the hostname even when `system_ca` is not being
performed. This leaks possible metadata, but allows servers providing
multiple hostnames to respond with the correct certificate. One example
is cloudflare, which getmonero.org is currently using.
If SSL is "enabled" via command line without specifying a fingerprint or
certificate, the system CA list is checked for server verification and
_now_ fails the handshake if that check fails. This change was made to
remain consistent with standard SSL/TLS client behavior. This can still
be overridden by using the allow any certificate flag.
If the SSL behavior is autodetect, the system CA list is still checked
but a warning is logged if this fails. The stream is not rejected
because a re-connect will be attempted - its better to have an
unverified encrypted stream than an unverified + unencrypted stream.
Using `verify_peer` on server side requests a certificate from the
client. If no certificate is provided, the server silently accepts the
connection and rejects if the client sends an unexpected certificate.
Adding `verify_fail_if_no_cert` has no affect on client and for server
requires that the peer sends a certificate or fails the handshake. This
is the desired behavior when the user specifies a fingerprint or CA file.
Currently a client must provide a certificate, even if the server is
configured to allow all certificates. This drops that requirement from
the client - unless the server is configured to use a CA file or
fingerprint(s) for verification - which is the standard behavior for SSL
servers.
The "system-wide" CA is not being used as a "fallback" to verify clients
before or after this patch.
Specifying SSL certificates for peer verification does an exact match,
making it a not-so-obvious alias for the fingerprints option. This
changes the checks to OpenSSL which loads concatenated certificate(s)
from a single file and does a certificate-authority (chain of trust)
check instead. There is no drop in security - a compromised exact match
fingerprint has the same worse case failure. There is increased security
in allowing separate long-term CA key and short-term SSL server keys.
This also removes loading of the system-default CA files if a custom
CA file or certificate fingerprint is specified.
Manually initialize the array_entry_t iterator to ensure it points
to the correct m_array, thereby preventing a potential use-after-free
situation.
Signed-off-by: Guido Vranken <guidovranken@gmail.com>
This avoids the annoying case where the shell prints its prompt
after the last line from Monero output, causing line editing to
sometimes go wonky, for lack of a better term
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
RPC connections now have optional tranparent SSL.
An optional private key and certificate file can be passed,
using the --{rpc,daemon}-ssl-private-key and
--{rpc,daemon}-ssl-certificate options. Those have as
argument a path to a PEM format private private key and
certificate, respectively.
If not given, a temporary self signed certificate will be used.
SSL can be enabled or disabled using --{rpc}-ssl, which
accepts autodetect (default), disabled or enabled.
Access can be restricted to particular certificates using the
--rpc-ssl-allowed-certificates, which takes a list of
paths to PEM encoded certificates. This can allow a wallet to
connect to only the daemon they think they're connected to,
by forcing SSL and listing the paths to the known good
certificates.
To generate long term certificates:
openssl genrsa -out /tmp/KEY 4096
openssl req -new -key /tmp/KEY -out /tmp/REQ
openssl x509 -req -days 999999 -sha256 -in /tmp/REQ -signkey /tmp/KEY -out /tmp/CERT
/tmp/KEY is the private key, and /tmp/CERT is the certificate,
both in PEM format. /tmp/REQ can be removed. Adjust the last
command to set expiration date, etc, as needed. It doesn't
make a whole lot of sense for monero anyway, since most servers
will run with one time temporary self signed certificates anyway.
SSL support is transparent, so all communication is done on the
existing ports, with SSL autodetection. This means you can start
using an SSL daemon now, but you should not enforce SSL yet or
nothing will talk to you.
- Support for ".onion" in --add-exclusive-node and --add-peer
- Add --anonymizing-proxy for outbound Tor connections
- Add --anonymous-inbounds for inbound Tor connections
- Support for sharing ".onion" addresses over Tor connections
- Support for broadcasting transactions received over RPC exclusively
over Tor (else broadcast over public IP when Tor not enabled).
The blockchain prunes seven eighths of prunable tx data.
This saves about two thirds of the blockchain size, while
keeping the node useful as a sync source for an eighth
of the blockchain.
No other data is currently pruned.
There are three ways to prune a blockchain:
- run monerod with --prune-blockchain
- run "prune_blockchain" in the monerod console
- run the monero-blockchain-prune utility
The first two will prune in place. Due to how LMDB works, this
will not reduce the blockchain size on disk. Instead, it will
mark parts of the file as free, so that future data will use
that free space, causing the file to not grow until free space
grows scarce.
The third way will create a second database, a pruned copy of
the original one. Since this is a new file, this one will be
smaller than the original one.
Once the database is pruned, it will stay pruned as it syncs.
That is, there is no need to use --prune-blockchain again, etc.
Number matching semantics are slightly changed: since this is used
as a filter to check whether a number is signed and/or floating
point, we can speed this up further. strto* functions are called
afterwards and will error out where necessary. We now also accept
numbers like .4 which were not accepted before.
The strto* calls on a boost::string_ref will not access unallocated
memory since the parsers always stop at the first bad character,
and the original string is zero terminated.
in arbitrary time measurement units for some arbitrary test case:
match_number2: 235 -> 70
match_word2: 330 -> 108
a13eb0a1 epee: speed up string matching a bit (moneromooo-monero)
3a3858dc epee: avoid string allocation when parsing a pod from string (moneromooo-monero)
ab783b17 easylogging++: ensure logger is initialized before main (moneromooo-monero)
9b69a0ae daemon: print monero version at startup when calling a detached daemon (moneromooo-monero)
4d71d463 mlocker: remove early page size log (moneromooo-monero)
b36353e2 unit_tests: add some hex parsing test for non hex input (xiphon)
6671110c unit_tests: add a test for parse_hexstr_to_binbuff (moneromooo-monero)
f6187cd8 epee: speed up parse_hexstr_to_binbuff a little (Howard Chu)
It comes before the logger is initialized, so gets displayed
even though it should not be by default, and apparenly comes
too early for (some versions of) Android, where it crashes.
This prevents exceptions from showing up in various awkward
places such as dtors, since the only exception that can be
thrown is a lock failure, and nothing handles a lock failure
anyway.
00901e9c epee: initialize a few data members where it seems to be appropriate (moneromooo-monero)
144a6c32 abstract_tcp_server2: move m_period to subclass (moneromooo-monero)
758d7684 connection_basic: remove unused floating time start time (moneromooo-monero)
e5108a29 Catch more exceptions in dtors (moneromooo-monero)
bcf3f6af fuzz_tests: catch unhandled exceptions (moneromooo-monero)
3ebd05d4 miner: restore stream flags after changing them (moneromooo-monero)
a093092e levin_protocol_handler_async: do not propagate exception through dtor (moneromooo-monero)
1eebb82b net_helper: do not propagate exceptions through dtor (moneromooo-monero)
fb6a3630 miner: do not propagate exceptions through dtor (moneromooo-monero)
2e2139ff epee: do not propagate exception through dtor (moneromooo-monero)
0749a8bd db_lmdb: do not propagate exceptions in dtor (moneromooo-monero)
1b0afeeb wallet_rpc_server: exit cleanly on unhandled exceptions (moneromooo-monero)
418a9936 unit_tests: catch unhandled exceptions (moneromooo-monero)
ea7f9543 threadpool: do not propagate exceptions through the dtor (moneromooo-monero)
6e855422 gen_multisig: nice exit on unhandled exception (moneromooo-monero)
53df2deb db_lmdb: catch error in mdb_stat calls during migration (moneromooo-monero)
e67016dd blockchain_blackball: catch failure to commit db transaction (moneromooo-monero)
661439f4 mlog: don't remove old logs if we failed to rename the current file (moneromooo-monero)
5fdcda50 easylogging++: test for NULL before dereference (moneromooo-monero)
7ece1550 performance_test: fix bad last argument calling add_arg (moneromooo-monero)
a085da32 unit_tests: add check for page size > 0 before dividing (moneromooo-monero)
d8b1ec8b unit_tests: use std::shared_ptr to shut coverity up about leaks (moneromooo-monero)
02563bf4 simplewallet: top level exception catcher to print nicer messages (moneromooo-monero)
c57a65b2 blockchain_blackball: fix shift range for 32 bit archs (moneromooo-monero)
26a42fe5 Added features to epee::span<T> : - Support for classes - Added `remove_prefix` function - Added `to_mut_span` and `as_mut_byte_span` (Lee Clagett)
56b50faa wallet: use wipeable_string in more places where a secret is used (moneromooo-monero)
07ec748c wipeable_string: add hex_to_pod function (moneromooo-monero)
42397359 Fixup 32bit arm build (TheCharlatan)
a06d2581 Fix Windows build (TheCharlatan)
ecaf5b3f Add libsodium to the packages, the arm build was complaining about it. (TheCharlatan)
cbbf4d24 Adapt translations to upstream changes (TheCharlatan)
db571546 Updated pcsc url (TheCharlatan)
f0ba19fd Add lrelease to the depends (TheCharlatan)
cfb30462 Add Miniupnp submodule (TheCharlatan)
5f7da005 Unbound is now a submodule. Adapt depends for this. (TheCharlatan)
d6b9bdd3 Update readmes to reflect the usage of depends (TheCharlatan)
56b6e41e Add support for apple and arm building (TheCharlatan)
29311fd1 Disable stack unwinding for mingw32 depends build. (TheCharlatan)
8db3d573 Modify depends for monero's dependencies (TheCharlatan)
0806a23a Initial depends addition (TheCharlatan)
4469b0c4 abstract_tcp_server2: fix binding to the wrong IP (moneromooo-monero)
8eab6147 epee: use the socket::bind variant which does not throw (moneromooo-monero)
Add readline, ldns, graphviz, unbound to depends packages
Add a cmake toolchain file to depends that is uniquely created for every build and placed in triple/share/toolchain.cmake
This file is then passed to cmake with -DCMAKE_TOOLCHAIN_FILE=/path/to/triple/share/toolchain.cmake
Add the boost locale package to depends
In the depends cmake toolchain file, a DEPENDS flag is added
to exclude, or change cmake checks done that are required for depends
Link miniupnpc and unwind from depends and not external
Add libiconv and icu4c to depends, required for mingw32 builds.
Headers (winsock) need to be lower case in order to compile on unix systems.
This should not affect building on windows.
29dea03 epee: resize vectors where possible in serialization (moneromooo-monero)
76affd9 epee: some speedup in parsing (moneromooo-monero)
dc6c069 db_lmdb: speedup the get_output_distribution common case (moneromooo-monero)
76ac5a8 wallet2: ask for a binary output distribution, for speed (moneromooo-monero)
This class will allow mlocking small objects, of which there
may be several per page. It adds refcounting so pages are only
munlocked when the last object on that page munlocks.
The secret spend key is kept encrypted in memory, and
decrypted on the fly when needed.
Both spend and view secret keys are kept encrypted in a JSON
field in the keys file. This avoids leaving the keys in
memory due to being manipulated by the JSON I/O API.
f8dd433 epee: fix detection of 172.16.0.0/172.31.255.255 local IP range (moneromooo-monero)
5db9e3c unit_tests: add tests for local IP range detection (moneromooo-monero)
a connection's timeout is halved for every extra connection
from the same host.
Also keep track of when we don't need to use a connection
anymore, so we can close it and free the resource for another
connection.
Also use the longer timeout for non routable local addresses.
