Commit Graph

23 Commits

Author SHA1 Message Date
mj-xmr
da9aa1f7f8
Copyright: Update to 2022 2022-03-04 06:59:20 +01:00
mj-xmr
45f01f577c [CI] Adaptive mining timeout, depending on available CPU power
Printing also available RAM. Add comprehensive description.
2021-03-30 05:48:55 +02:00
mj-xmr
c836dc11c9 [CI] Use Python3 for funcional tests, instead of Python2 2021-03-20 10:30:57 +01:00
moneromooo-monero
b5209a09d2
functional_tests: hide check_missing_rpc_methods behind requests check 2021-02-23 20:10:03 +00:00
mj-xmr
8a282f64c9 Add RELINK_TARGETS, monero_add_target_no_relink and use monero_add_executable/monero_add_library where possible (mj-xmr)
Add monero_add_minimal_executable and use in tests

This is done in order not to have to relink targets, when just an .so changed, but not its interface.
2020-10-28 20:08:26 +01:00
SomaticFanatic
5ef0607da6 Update copyright year to 2020
Update copyright year to 2020
2020-05-06 22:36:54 -04:00
moneromooo-monero
2899379791
daemon, wallet: new pay for RPC use system
Daemons intended for public use can be set up to require payment
in the form of hashes in exchange for RPC service. This enables
public daemons to receive payment for their work over a large
number of calls. This system behaves similarly to a pool, so
payment takes the form of valid blocks every so often, yielding
a large one off payment, rather than constant micropayments.

This system can also be used by third parties as a "paywall"
layer, where users of a service can pay for use by mining Monero
to the service provider's address. An example of this for web
site access is Primo, a Monero mining based website "paywall":
https://github.com/selene-kovri/primo

This has some advantages:
 - incentive to run a node providing RPC services, thereby promoting the availability of third party nodes for those who can't run their own
 - incentive to run your own node instead of using a third party's, thereby promoting decentralization
 - decentralized: payment is done between a client and server, with no third party needed
 - private: since the system is "pay as you go", you don't need to identify yourself to claim a long lived balance
 - no payment occurs on the blockchain, so there is no extra transactional load
 - one may mine with a beefy server, and use those credits from a phone, by reusing the client ID (at the cost of some privacy)
 - no barrier to entry: anyone may run a RPC node, and your expected revenue depends on how much work you do
 - Sybil resistant: if you run 1000 idle RPC nodes, you don't magically get more revenue
 - no large credit balance maintained on servers, so they have no incentive to exit scam
 - you can use any/many node(s), since there's little cost in switching servers
 - market based prices: competition between servers to lower costs
 - incentive for a distributed third party node system: if some public nodes are overused/slow, traffic can move to others
 - increases network security
 - helps counteract mining pools' share of the network hash rate
 - zero incentive for a payer to "double spend" since a reorg does not give any money back to the miner

And some disadvantages:
 - low power clients will have difficulty mining (but one can optionally mine in advance and/or with a faster machine)
 - payment is "random", so a server might go a long time without a block before getting one
 - a public node's overall expected payment may be small

Public nodes are expected to compete to find a suitable level for
cost of service.

The daemon can be set up this way to require payment for RPC services:

  monerod --rpc-payment-address 4xxxxxx \
    --rpc-payment-credits 250 --rpc-payment-difficulty 1000

These values are an example only.

The --rpc-payment-difficulty switch selects how hard each "share" should
be, similar to a mining pool. The higher the difficulty, the fewer
shares a client will find.
The --rpc-payment-credits switch selects how many credits are awarded
for each share a client finds.
Considering both options, clients will be awarded credits/difficulty
credits for every hash they calculate. For example, in the command line
above, 0.25 credits per hash. A client mining at 100 H/s will therefore
get an average of 25 credits per second.
For reference, in the current implementation, a credit is enough to
sync 20 blocks, so a 100 H/s client that's just starting to use Monero
and uses this daemon will be able to sync 500 blocks per second.

The wallet can be set to automatically mine if connected to a daemon
which requires payment for RPC usage. It will try to keep a balance
of 50000 credits, stopping mining when it's at this level, and starting
again as credits are spent. With the example above, a new client will
mine this much credits in about half an hour, and this target is enough
to sync 500000 blocks (currently about a third of the monero blockchain).

There are three new settings in the wallet:

 - credits-target: this is the amount of credits a wallet will try to
reach before stopping mining. The default of 0 means 50000 credits.

 - auto-mine-for-rpc-payment-threshold: this controls the minimum
credit rate which the wallet considers worth mining for. If the
daemon credits less than this ratio, the wallet will consider mining
to be not worth it. In the example above, the rate is 0.25

 - persistent-rpc-client-id: if set, this allows the wallet to reuse
a client id across runs. This means a public node can tell a wallet
that's connecting is the same as one that connected previously, but
allows a wallet to keep their credit balance from one run to the
other. Since the wallet only mines to keep a small credit balance,
this is not normally worth doing. However, someone may want to mine
on a fast server, and use that credit balance on a low power device
such as a phone. If left unset, a new client ID is generated at
each wallet start, for privacy reasons.

To mine and use a credit balance on two different devices, you can
use the --rpc-client-secret-key switch. A wallet's client secret key
can be found using the new rpc_payments command in the wallet.
Note: anyone knowing your RPC client secret key is able to use your
credit balance.

The wallet has a few new commands too:

 - start_mining_for_rpc: start mining to acquire more credits,
regardless of the auto mining settings
 - stop_mining_for_rpc: stop mining to acquire more credits
 - rpc_payments: display information about current credits with
the currently selected daemon

The node has an extra command:

 - rpc_payments: display information about clients and their
balances

The node will forget about any balance for clients which have
been inactive for 6 months. Balances carry over on node restart.
2019-10-25 09:34:38 +00:00
moneromooo-monero
e037ecb014
functional_tests: check for RPC methods which aren't exposed 2019-09-17 11:38:30 +00:00
moneromooo-monero
3e50a9e8fc
functional_tests: detect requests python module 2019-04-18 19:33:01 +00:00
moneromooo-monero
ef7681b699
functional_tests: plug RPC tests into the cmake machinery 2019-03-21 19:27:42 +00:00
binaryFate
1f2930ce0b Update 2019 copyright 2019-03-05 22:05:34 +01:00
iDunk5400
e7f24850d5
Fix Windows build after epee dependency change 2018-10-15 23:08:17 +00:00
iDunk5400
7f2ad1a768
functional_tests: fix linking on Windows 2018-10-03 01:06:03 +02:00
xmr-eric
18216f19dd Update 2018 copyright 2018-01-26 10:03:20 -05:00
Gentian
4b932ff314 changed crypto to cncrypto so it generated libcncrypto
fix a cmakelist
2017-05-23 07:45:40 -04:00
Riccardo Spagni
c3599fa7b9
update copyright year, fix occasional lack of newline at line end 2017-02-21 19:38:18 +02:00
moneromooo-monero
5833d66f65
Change logging to easylogging++
This replaces the epee and data_loggers logging systems with
a single one, and also adds filename:line and explicit severity
levels. Categories may be defined, and logging severity set
by category (or set of categories). epee style 0-4 log level
maps to a sensible severity configuration. Log files now also
rotate when reaching 100 MB.

To select which logs to output, use the MONERO_LOGS environment
variable, with a comma separated list of categories (globs are
supported), with their requested severity level after a colon.
If a log matches more than one such setting, the last one in
the configuration string applies. A few examples:

This one is (mostly) silent, only outputting fatal errors:

MONERO_LOGS=*:FATAL

This one is very verbose:

MONERO_LOGS=*:TRACE

This one is totally silent (logwise):

MONERO_LOGS=""

This one outputs all errors and warnings, except for the
"verify" category, which prints just fatal errors (the verify
category is used for logs about incoming transactions and
blocks, and it is expected that some/many will fail to verify,
hence we don't want the spam):

MONERO_LOGS=*:WARNING,verify:FATAL

Log levels are, in decreasing order of priority:
FATAL, ERROR, WARNING, INFO, DEBUG, TRACE

Subcategories may be added using prefixes and globs. This
example will output net.p2p logs at the TRACE level, but all
other net* logs only at INFO:

MONERO_LOGS=*:ERROR,net*:INFO,net.p2p:TRACE

Logs which are intended for the user (which Monero was using
a lot through epee, but really isn't a nice way to go things)
should use the "global" category. There are a few helper macros
for using this category, eg: MGINFO("this shows up by default")
or MGINFO_RED("this is red"), to try to keep a similar look
and feel for now.

Existing epee log macros still exist, and map to the new log
levels, but since they're used as a "user facing" UI element
as much as a logging system, they often don't map well to log
severities (ie, a log level 0 log may be an error, or may be
something we want the user to see, such as an important info).
In those cases, I tried to use the new macros. In other cases,
I left the existing macros in. When modifying logs, it is
probably best to switch to the new macros with explicit levels.

The --log-level options and set_log commands now also accept
category settings, in addition to the epee style log levels.
2017-01-16 00:25:46 +00:00
redfish
e1c7af35d4 cmake: transitive deps and remove deprecated LINK_*
Keep the immediate direct deps at the library that depends on them,
declare deps as PUBLIC so that targets that link against that library
get the library's deps as transitive deps.

Break dep cycle between blockchain_db <-> crytonote_core.
No code refactoring, just hide cycle from cmake so that
it doesn't complain (cycles are allowed only between
static libs, not shared libs).

This is in preparation for supproting BUILD_SHARED_LIBS cmake
built-in option for building internal libs as shared.
2016-09-18 02:56:26 -04:00
Riccardo Spagni
de03926850
updated copyright year 2015-12-31 08:39:56 +02:00
Riccardo Spagni
f4b69d553a
year updated in license 2015-01-02 18:52:46 +02:00
Ben Boeckel
01895dd067 cmake: fix up link lines 2014-10-24 15:30:57 -04:00
Ben Boeckel
7d708e4223 cmake: support 2.8.7
Older versions of CMake support LINK_{PUBLIC,PRIVATE} while newer
versions prefer PUBLIC and PRIVATE instead, but still support the LINK_
prefix.
2014-10-24 15:29:51 -04:00
Ben Boeckel
7bfcffadb9 cmake: put each test executable in its own directory 2014-10-23 16:42:34 -04:00