Language XML files: update XML files with new fields and some changes.

Translations/Language.ar.xml

@@ -962,10 +962,10 @@
     <string lang="ar" key="VOLUME_HAS_NO_BACKUP_HEADER">‮لا توجد نسخة ترويسة احتياطية مُضمَّنة في هذا المجلد (لاحظ أن المجلدات المنشأة بڤيراكربت ‪6.0‬ أو ما يليه وحدها تحوي نسخا احتياطية من الترويسة).</string>
     <string lang="ar" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">‮تحاول حفظ ترويسة قسم\\نبيطة النظام؛ و هذا غير مسموح به. عمليات الحفظ\\الاسترجاع المتعلقة بقسم\\نبيطة النظام لا يمكن أداؤها إلا باستخدام قرص إنقاذ ڤيراكربت. ‮ ‮أتريد إنشاء قرص إنقاذ ڤيراكربت؟</string>
     <string lang="ar" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">‮تحاول استرجاع ترويسة مجلد ڤيراكربت افتراضي إلا أنك اخترت قسم\\نبيطة النظام؛ و هذا غير مسموح به. عمليات الحفظ\\الاسترجاع المتعلقة بقسم\\نبيطة النظام لا يمكن أداؤها إلا باستخدام قرص إنقاذ ڤيراكربت. ‮ ‮أتريد إنشاء قرص إنقاذ ڤيراكربت؟</string>
-    <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">‮بعد أن تنقر 'موافق' فستختار اسم ملف لصورة ‪ISO‬ الجديدة لقرص إنقاذ ڤيراكربت و موضع حفظها.</string>
+    <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">‮بعد أن تنقر 'موافق' فستختار اسم ملف لصورة جديدة لقرص إنقاذ ڤيراكربت و موضع حفظها.</string>
     <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">صورة قرص الإسعاف تم إنشاؤه وحفظه في هذا الملف:\n%s\n\nالآن تحتاج حرق الصورة على قرص مدمج أو دي في دي.\n\nمهم: لاحظ أن الملف يجب أن يكتب على الوسيط كصورة ملف آيزو (وليس كملف لوحده). لمزيد من المعلومات عن كيفية هذا, يرجى الرجوع لديل استخدام برنامج حرق الأقراص المدمجة.\n\nبعد حرق قرص الإسعاف, اختر 'النظام' &gt; 'التحقق من قرص الإسعاف' لتحقق أنه تم حرقه فعلا بنجاح.</string>
     <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">صورة قرص الإسعاف تم إنشاؤه وحفظه في هذا الملف:\n%s\n\nالآن تحتاج حرق الصورة على قرص مدمج أو دي في دي.\n\nهل ترغب في تشغيل برنامج  Microsoft Windows Disc Image Burner الآن?\n\nملاحظة: بعد حرق قرص الإسعاف, اختر 'النظام' &gt; 'التحقق من قرص الإسعاف' للتحقق من حرق قرص الإسعاف بنجاح.</string>
-    <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">‮أدخل قرص إنقاذ ڤيراكربت في سواقة أقراص سي‌دي/دي‌ڤي‌دي و انقر 'موافق' لفحصه.</string>
+    <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">‮أدخل قرص إنقاذ ڤيراكربي و انقر 'موافق' لفحصه.</string>
     <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">‮تم بنجاح التحقق من سلامة قرص إنقاذ ڤيراكربت.</string>
     <string lang="ar" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">‮تعذّر توكيد أن قرص إنقاذ ڤيراكربت قد تم تسجيله كما ينبغي. ‮ ‮إن كنت أتممت التسجيل على هذا القرص فأخرجه من السواقة ثم أعد إدخاله و اختبره مجددا. إن لم تنحل المشكلة فجرب برمجية تسجيل أقراص أخرى أو/و قرصا آخر. ‮ ‮إن كنت تحاول فحص قرص إنقاذ ڤيراكربت أُنشئ لأجل مفتاح رئيسي آخر أو بكلمة سر أو بذرة مختلفة، إلخ، فاعلم أن هذا القرص سيفشل دوما في هذا الفحص. لتنشئ قرص إنقاذ جديد متوافق مع إعداداتك الحالية اختر 'نظام' &gt; 'أنشئ قرص إنقاذ'.</string>
     <string lang="ar" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">تم التحقق من قرص الإسعاف لفيراكربت بنجاح.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.be.xml

@@ -261,7 +261,7 @@
     <control lang="be" key="IDM_UNMOUNTALL">Размантаваць усе змантаваныя тамы</control>
     <control lang="be" key="IDM_UNMOUNT_VOLUME">Размантаваць том</control>
     <control lang="be" key="IDM_VERIFY_RESCUE_DISK">Праверыць дыск узнаўлення</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="be" key="IDM_VERSION_HISTORY">Гісторыя версій</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="be" key="IDM_VOLUME_PROPERTIES">Налады тома</control>
@@ -965,11 +965,11 @@
     <string lang="be" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Пасля націску OK абярыце імя файла для ISO-выявы новага дыска ўзнаўлення VeraCrypt (Rescue Disk) і месца, дзе яго трэба захаваць.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="be" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Каб праверыць дыск узнаўлення VeraCrypt, устаўце яго ў CD/DVD-назапашвальнік і націсніце OK.</string>
+    <string lang="be" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Каб праверыць дыск узнаўлення VeraCrypt, устаўце і націсніце OK.</string>
     <string lang="be" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Дыск узнаўлення VeraCrypt паспяхова прайшоў праверку.</string>
     <string lang="be" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Немагчыма праверыць правільнасць запісу дыска ўзнаўлення.\n\nКалі вы запісалі дыск узнаўлення, дастаньце CD/DVD з назапашвальніка і ўстаўце зноў; затым націсніце 'Далей', каб паўтарыць спробу. Калі гэта не дапаможа, паспрабуйце скарыстацца іншым ПЗ для запісу CD/DVD і/ці іншым CD/DVD.\n\nКалі вы спрабавалі праверыць дыск узнаўлення VeraCrypt, створаны з іншым майстар-ключом, паролем, 'соллю' і г.д., ведайце, што такі дыск узнаўлення не пройдзе гэтую праверку ніколі. Каб стварыць новы дыск узнаўлення, цалкам сумяшчальны з бягучай канфігурацыяй, абярыце меню 'Сістэма' &gt; 'Стварыць дыск узнаўлення'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="be" key="ERROR_CREATING_RESCUE_DISK">Памылка стварэння дыска аварыйнага ўзнаўлення VeraCrypt.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.bg.xml

@@ -261,7 +261,7 @@
     <control lang="bg" key="IDM_UNMOUNTALL">Демонтиране на всички монтирани томове</control>
     <control lang="bg" key="IDM_UNMOUNT_VOLUME">Демонтиране на том</control>
     <control lang="bg" key="IDM_VERIFY_RESCUE_DISK">Проверка на Спасителен Диск</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="bg" key="IDM_VERSION_HISTORY">История на версиите</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="bg" key="IDM_VOLUME_PROPERTIES">Свойства на тома</control>
@@ -962,14 +962,14 @@
     <string lang="bg" key="VOLUME_HAS_NO_BACKUP_HEADER">В този том няма вградено бекъп копие на заглавната част на тома (имайте предвид, че само томове създадени от VeraCrypt 6.0 или по-късни версии съдържат вградено бекъп копие на заглавната част на тома).</string>
     <string lang="bg" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Опитвате се да архивирате заглавната част на системен дял/устройство. Това не е позволено. Операциите на архивиране/възстановяване отнасящи се до системния дял/устройство могат да бъдат извършени само с помощта на VeraCrypt Спасителния Диск.\n\nЖелаете ли да създадете VeraCrypt Спасителен Диск?</string>
     <string lang="bg" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Опитвате се да възстановите заглавната част на виртуален VeraCrypt том, но сте избрали системеният дял/устройство. Това не е позволено. Операциите на архивиране/възстановяване отнасящи се до системния дял/устройство могат да бъдат извършени само с помощта на VeraCrypt Спасителния Диск.\n\nЖелаете ли да създадете VeraCrypt Спасителен Диск?</string>
-    <string lang="bg" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">След като натиснете OK, ще изберете име на файл за ISO изображението на новия VeraCrypt Спасителен Диск и местоположението, където искате да го поставите.</string>
+    <string lang="bg" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">След като натиснете OK, ще изберете име на файл за изображението на новия VeraCrypt Спасителен Диск и местоположението, където искате да го поставите.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="bg" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Моля, поставете вашия VeraCrypt Спасителен Диск във вашето CD/DVD устройство и натиснете OK за да го проверите.</string>
+    <string lang="bg" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Моля, поставете вашия VeraCrypt Спасителен Диск и натиснете OK за да го проверите.</string>
     <string lang="bg" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt Спасителният Диск е проверен успешно.</string>
     <string lang="bg" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Не може да се провери дали Спасителният Диск е бил записан успешно.\n\nАко сте записали Спасителния Диск, моля извадете и поставете отново CD/DVD диска; след това опитайте отново. Ако това не помага, моля опитайте друг софтуер за записване на CD/DVD и/или друг CD/DVD носител.\n\nАко сте опитали да проверите VeraCrypt Спасителен Диск създаден за различен главен ключ, парола, сол, и др., моля, забележете, че такъв Спасителен Диск никога няма да успява на тази проверка. За да създадете нов Спасителен Диск напълно съвместим с текущата ви конфигурация, изберете 'Система' &gt; 'Създаване на Спасителен Диск'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="bg" key="ERROR_CREATING_RESCUE_DISK">Грешка при създаването на VeraCrypt Спасителен Диск.</string>
     <string lang="bg" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Спасителен Диск не може да бъде създаден, когато е стартирана скрита операционна система.\n\nЗа да създадете VeraCrypt Спасителен Диск, стартирайте заблуждаващата операционна система и след това изберете 'Система' &gt; 'Създаване на Спасителен Диск'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.ca.xml

@@ -261,7 +261,7 @@
     <control lang="ca" key="IDM_UNMOUNTALL">Desmuntar tots els volums</control>
     <control lang="ca" key="IDM_UNMOUNT_VOLUME">Desmuntar el volum</control>
     <control lang="ca" key="IDM_VERIFY_RESCUE_DISK">Verificar el disc de recuperació</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="ca" key="IDM_VERSION_HISTORY">Historial de versions</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="ca" key="IDM_VOLUME_PROPERTIES">Propietats del volum</control>
@@ -962,14 +962,14 @@
     <string lang="ca" key="VOLUME_HAS_NO_BACKUP_HEADER">No hi ha una còpia de seguretat inclosa en aquest volum (tingui en compte que només els volums creats amb un VeraCrypt 6.0 o superiro tenen aquestes còpies).</string>
     <string lang="ca" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Està intentant fer una còpia de seguretat de la partició/unitat de sistema. Això no està permés. Les operacions de còpia de seguretat i restauració de les particions/unitats de sistema només es poden realitzar a través dels discos de recuperació del VeraCrypt.\n\nVol crear un disc de recuperació?</string>
     <string lang="ca" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Està intentant restaurar una còpia de seguretat de la partició/unitat de sistema. Això no està permés. Les operacions de còpia de seguretat i restauració de les particions/unitats de sistema només es poden realitzar a través dels discos de recuperació del VeraCrypt.\n\nVol crear un disc de recuperació?</string>
-    <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Després de fer clic a 'OK', haurà de seleccionar un nom de fitxer per el nou fitxer ISO del disc de recuperació i la ubicació on vol guardar-lo.</string>
+    <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Després de fer clic a 'OK', haurà de seleccionar un nom de fitxer per el nou fitxer del disc de recuperació i la ubicació on vol guardar-lo.</string>
     <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">S'ha creat la imatge del disc de recuperació i s'ha guardat a:\n%s\n\nAra ha de gravar la imatge a un CD o DVD.\nIMPORTANT: Tingui en compte que el fitxer s'ha de gravar a un CD/DVD com a imatge ISO (no com un fitxer individual).\n\nDesprés de gravar el disc de recuperació, seleccioni 'Sistema' &gt; 'Verificar el disc de recuperació' per verificar que s'ha gravat correctament.</string>
     <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">S'ha creat la imatge del disc de recuperació i s'ha guardat a:\n%s\n\nAra ha de gravar la imatge a un CD o DVD.\n\nVol executar el gravador d'imatges de disc de Microsoft Windows?\n\nDesprés de gravar el disc de recuperació, seleccioni 'Sistema' &gt; 'Verificar el disc de recuperació' per verificar que s'ha gravat correctament.</string>
-    <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Si us plau, introdueixi el disc de recuperació del VeraCrypt a la unitat de CD/DVD i faci clic a 'OK' per verificar-lo.</string>
+    <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Si us plau, introdueixi el disc de recuperació del VeraCrypt i faci clic a 'OK' per verificar-lo.</string>
     <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">S'ha verificat el disc de recuperació del VeraCrypt amb èxit.</string>
     <string lang="ca" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">No s'ha pogut verificar que el disc de recuperació s'hagi gravat correctament.\n\nSi ha gravat el disc de recuperació, si us plau expulsi el CD/DVD de l'unitat i torni'l a posar; torni a provar la verificació. Si això no soluciona el problema, intenti gravar el disc de recuperació amb un altre programa o a un altre tipus de mitjà.\n\nSi està intentant verificar un disc de recuperació que s'ha creat amb una clau mestra, contrasenya, etc. diferent aquesta verificació sempre fallarà. Per a crear un nou disc de recuperació completament compatible amb la configuració actual, seleccioni 'Sistema' &gt; 'Crear un disc de recuperació'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="ca" key="ERROR_CREATING_RESCUE_DISK">Error al crear un disc de recuperació VeraCrypt.</string>
     <string lang="ca" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">No es pot crear un disc de recuperació mentre s'està executant un sistema operatiu ocult\n\nPer crear un disc de recuperació, engegui el sistema operatiu esquer i faci clic a 'Sistema' &gt; 'Crear un disc de recuperació'.</string>
     <string lang="ca" key="RESCUE_DISK_CHECK_FAILED">No s'ha pogut verificar que el disc de recuperació s'hagi gravat correctament.\n\nSi ha gravat el disc de recuperació, si us plau expulsi el CD/DVD de l'unitat i torni'l a posar; torni a provar la verificació. Si això no soluciona el problema, intenti gravar el disc de recuperació en un altre tipus de mitjà%s.\n\nSi encara no ha gravat el disc de recuperació, faci-ho ara i després faci clic a 'Següent'.\n\nSi està intentant verificar un disc de recuperació creat abans d'engegar aquest assistent tingui en compte que aquest disc no serà usable, ja que es va crear amb una clau mestra diferent. És necessari gravar el disc de recuperació nou.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.cs.xml

@@ -261,7 +261,7 @@
     <control lang="cs" key="IDM_UNMOUNTALL">Odpojit všechny připojené svazky</control>
     <control lang="cs" key="IDM_UNMOUNT_VOLUME">Odpojit svazek</control>
     <control lang="cs" key="IDM_VERIFY_RESCUE_DISK">Ověřit záchranný disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="cs" key="IDM_VERSION_HISTORY">Historie verzí</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="cs" key="IDM_VOLUME_PROPERTIES">Vlastnosti svazku</control>
@@ -965,11 +965,11 @@
     <string lang="cs" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Po kliknutí na OK zvolíte soubor pro nový obraz Záchranného disku VeraCrypt a místo, kam ho chcete uložit.</string>
     <string lang="cs" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Obraz Záchranného disku byl vytvořen a uložen v tomto souboru:\n%s\n\nNyní musíte vypálit obraz Záchranného disku na CD nebo DVD.\n\nDŮLEŽÍTÉ: Soubor musí být na CD/DVD zapsán jako obraz disku (ne jako samostatný soubor). Pro více informací, viz dokumentace k vašemu CD/DVD vypalovacímu softwaru.\n\nAž Záchranný disk vypálíte, vyberte 'Systém' &gt; 'Ověřit záchranný disk', abyste zjistili, zda byl správně vypálen.</string>
     <string lang="cs" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Obraz Záchranného disku byl vytvořen a uložen v tomto souboru:\n%s\n\nNyní musíte vypálit obraz Záchranného disku na CD nebo DVD.\n\nChcete nyní spustit program Microsoft Windows Disc Image Burner?\n\nPoznámka: Až Záchranný disk vypálíte, vyberte 'Systém' &gt; 'Ověřit záchranný disk', abyste zjistili, zda byl správně vypálen.</string>
-    <string lang="cs" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Vložte, prosím, Záchranný disk VeraCrypt do vaší CD/DVD mechaniky a klikněte OK pro jeho ověření.</string>
+    <string lang="cs" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Vložte, prosím, Záchranný disk VeraCrypt a klikněte OK pro jeho ověření.</string>
     <string lang="cs" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Záchranný disk VeraCrypt byl úspěšně ověřen.</string>
     <string lang="cs" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Nelze ověřit, zda byl Záchranný disk správně vypálen.\n\nPokud jste Záchranný disk vypálili, vložte ho prosím znovu do CD/DVD mechaniky a zkuste to znovu. Pokud to nepomůže, zkuste jiný vypalovací software a/nebo médium.\n\nPokusíte-li se ověřit Záchranný disk VeraCrypt vytvořený pro jiný hlavní klíč, heslo apod., mějte na vědomí, že takovéto ověřování Záchranného disku selže vždy. Pro vytvoření nového Záchranného disku, který je plně kompatibilní s aktuální konfigurací, vyberte 'Systém' &gt; 'Vytvořit Záchranný disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="cs" key="ERROR_CREATING_RESCUE_DISK">Chyba při vytváření Záchranného disku VeraCrypt.</string>
     <string lang="cs" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Záchranný disk VeraCrypt nemůže být vytvořen, pokud běží skrytý operační systém.\n\nPro vytvoření Záchranného disku VeraCrypt nabootujte klamný operační systém a vyberte 'Systém' &gt; 'Vytvořit Záchranný disk'.</string>
     <string lang="cs" key="RESCUE_DISK_CHECK_FAILED">Nelze ověřit, zda byl Záchranný disk správně vypálen.\n\nPokud jste Záchranný disk vypálili, vysuňte a znovu vložte CD/DVD; pak klikněte na Další a zkuste to znovu. Pokud to nepomůže, zkuste prosím jiné médium%s.\n\nPokud jste Záchranný disk ještě nevypálili, učiňte tak a klikněte na Další.\n\nPokud jste se pokusili ověřit VeraCrypt záchranný disk, který byl vytvořen ještě před tím, než jste spustili tohoto průvodce, vězte, že takový Záchranný disk nemůže být použit, protože byl vytvořen pro jiný hlavní klíč. Musíte vypálit nově vygenerovaný Záchranný disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.da.xml

@@ -261,7 +261,7 @@
     <control lang="da" key="IDM_UNMOUNTALL">Afbryd alle tilsluttede Bind</control>
     <control lang="da" key="IDM_UNMOUNT_VOLUME">Afbryd Bind</control>
     <control lang="da" key="IDM_VERIFY_RESCUE_DISK">Kontroller Nødhjælps Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="da" key="IDM_VERSION_HISTORY">Versions Historik</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="da" key="IDM_VOLUME_PROPERTIES">Bind Egenskaber</control>
@@ -962,14 +962,14 @@
     <string lang="da" key="VOLUME_HAS_NO_BACKUP_HEADER">Der er ingen backup etiket indbygget i dette bind (bemærk at kun bind oprettet med VeraCrypt 6.0 eller senere indeholder indbyggede backup etiketter).</string>
     <string lang="da" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Du forsøger at lave backup af etiket for system partition/drevet. Dette er ikke tilladt. Backup/gendan funktioner angående system partition/drev kan kun udføres ved hjælp af VeraCrypt Nødhjælps Disk.\n\nØnsker du at oprette en VeraCrypt Nødhjælps Disk?</string>
     <string lang="da" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Du forsøger at gendanne en etiket for et virtuelt VeraCrypt bind men du valgte system partition/drev. Dette er ikke tilladt. Backup/gendan funktioner angående system partition/drev kan kun udføres ved hjælp af VeraCrypt Nødhjælps Disk.\n\nØnsker du at oprette en VeraCrypt Nødhjælps Disk?</string>
-    <string lang="da" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Efter du har klikket OK, skal du vælge et filnavn til det nye VeraCrypt Nødhjælps Disk ISO billede og placeringen hvor du ønsker at placere det.</string>
+    <string lang="da" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Efter du har klikket OK, skal du vælge et filnavn til det nye VeraCrypt Nødhjælps Disk billede og placeringen hvor du ønsker at placere det.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="da" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Indsæt venligst din VeraCrypt Nødhjælps Disk i dit CD/DVD drev og klik på OK for at kontrollere den.</string>
+    <string lang="da" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Indsæt venligst din VeraCrypt Nødhjælps Disk og klik på OK for at kontrollere den.</string>
     <string lang="da" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt Nødhjælps Disk er blevet kontrolleret med succes.</string>
     <string lang="da" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Kan ikke kontrollere at Nødhjælps Disk er blevet korrekt brændt.\n\nHvis du har brændt Nødhjælps Disk, vær venlig at tage CD/DVD ud og sætte den i igen; prøv så igen. Hvis dette ikke hjælper, prøv venligst en anden CD/DVD optager software og/eller medie.\n\nHvis du forsøgte at kontrollere en VeraCrypt Nødhjælps Disk oprettet med en anden hovednøgle, kodeord, salt, osv., bemærk venligst at en sådan Nødhjælps Disk altid vil fejle denne kontrol. For at oprette en ny Nødhjælps Disk der er fuld ud kompatibel med din nuværende konfiguration, vælg 'System' &gt; 'Opret Nødhjælps Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="da" key="ERROR_CREATING_RESCUE_DISK">Fejl i oprettelsen af VeraCrypt Nødhjælps Disk.</string>
     <string lang="da" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Nødhjælps Disk kan ikke oprettes når et skjult operativsystem kører.\n\nFor at oprette en VeraCrypt Nødhjælps Disk, boot op på aflednings operativsystemet og vælg så 'System' &gt; 'Opret Nødhjælps Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.de.xml

@@ -261,7 +261,7 @@
     <control lang="de" key="IDM_UNMOUNTALL">A&amp;lle Volumes trennen</control>
     <control lang="de" key="IDM_UNMOUNT_VOLUME">Volume &amp;trennen</control>
     <control lang="de" key="IDM_VERIFY_RESCUE_DISK">Rettungsdatenträger überprüfen</control>
-    <control lang="de" key="IDM_VERIFY_RESCUE_DISK_ISO">ISO-Abbild von Rettungsdatenträger überprüfen</control>
+    <control lang="de" key="IDM_VERIFY_RESCUE_DISK_ISO">Abbild von Rettungsdatenträger überprüfen</control>
     <control lang="de" key="IDM_VERSION_HISTORY">&amp;Versionsverlauf</control>
     <control lang="de" key="IDM_VOLUME_EXPANDER">Volume-Erweiterer</control>
     <control lang="de" key="IDM_VOLUME_PROPERTIES">E&amp;igenschaften des VeraCrypt-Volumes</control>
@@ -962,10 +962,10 @@
     <string lang="de" key="VOLUME_HAS_NO_BACKUP_HEADER">Es ist keine Kopfdatensicherung in diesem Volume eingebettet (beachten sie, dass nur Volumes die mit VeraCrypt 1.0 oder höher erstellt wurden eingebettete Kopfdatensicherungen enthalten).</string>
     <string lang="de" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Sie möchten die Kopfdaten der Systempartition/vom Systemlaufwerk sichern. Das ist nicht erlaubt. Sicherungs-/Wiederherstellungsvorgänge in Zusammenhang mit der Systempartition/dem Systemlaufwerk können nur mit dem VeraCrypt-Rettungsdatenträger durchgeführt werden.\n\nMöchten Sie einen VeraCrypt-Rettungsdatenträger erstellen?</string>
     <string lang="de" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Sie haben versucht, die Kopfdaten eines Virtuellen VeraCrypt-Volumes wiederherzustellen, aber Sie haben die Systempartition/das Systemlaufwerk ausgewählt. Das ist nicht erlaubt. Sicherungs-/Wiederherstellungsvorgänge in Zusammenhang mit der Systempartition/dem Systemlaufwerk können nur mit dem VeraCrypt-Rettungsdatenträger durchgeführt werden.\n\nMöchten Sie einen VeraCrypt-Rettungsdatenträger erstellen?</string>
-    <string lang="de" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Nach dem Klicken auf „OK“ wählen Sie einen Dateinamen für die ISO-Abbilddatei des VeraCrypt-Rettungsdatenträgers und den Speicherort der Datei.</string>
+    <string lang="de" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Nach dem Klicken auf „OK“ wählen Sie einen Dateinamen für die abbilddatei des VeraCrypt-Rettungsdatenträgers und den Speicherort der Datei.</string>
     <string lang="de" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Das Rettungsdatenträger-Abbild wurde erstellt und in dieser Datei gespeichert:\n%s\n\nJetzt müssen Sie das Rettungsdatenträger-Abbild auf eine CD oder DVD brennen.\n\nWICHTIG: Bitte beachten Sie, dass die Datei als ISO-Abbilddatei und NICHT als einzelne Datei auf die CD geschrieben werden muss. Informationen wie Sie das tun erhalten Sie in der Dokumentation Ihrer Brennsoftware.\n\nNachdem Sie die Rettungs-CD gebrannt haben, wählen Sie „System“ &gt; „Rettungsdatenträger überprüfen“, um sicherzustellen, dass die CD korrekt erstellt wurde.</string>
     <string lang="de" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Das Rettungsdatenträger-Abbild wurde erstellt und in dieser Datei gespeichert:\n%s\n\nJetzt müssen Sie das Rettungsdatenträger-Abbild auf eine CD oder DVD brennen.\n\nMöchten Sie den Microsoft Windows ISO-Brennprogramm jetzt starten?\n\nNachdem Sie den Rettungsdatenträger gebrannt haben, wählen Sie „System“ &gt; „Rettungsdatenträger überprüfen“, um sicherzustellen, dass die CD korrekt erstellt wurde.</string>
-    <string lang="de" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Bitte legen Sie den VeraCrypt-Rettungsdatenträger in Ihr CD- bzw. DVD-Laufwerk und klicken dann zum Prüfen auf „OK“.</string>
+    <string lang="de" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Bitte legen Sie den VeraCrypt-Rettungsdatenträger und klicken dann zum Prüfen auf „OK“.</string>
     <string lang="de" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Der VeraCrypt-Rettungsdatenträger wurde erfolgreich überprüft.</string>
     <string lang="de" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Es konnte nicht festgestellt werden, dass der Rettungsdatenträger korrekt gebrannt wurde.\n\nWenn Sie die CD/DVD gebrannt haben, dann werfen Sie diese aus und legen die CD/DVD anschließend wieder ein, um es erneut zu versuchen. Bitte versuchen Sie es mit einer anderen Brennsoftware oder mit anderen CD- bzw. DVD-Rohlingen falls es nicht funktioniert.\n\nWenn Sie versuchen einen VeraCrypt-Rettungsdatenträger zu prüfen, der für einen anderen Hauptschlüssel, Salt-Wert, anderes Passwort, etc. erstellt wurde, so beachten Sie, dass bei solchen Rettungsdatenträger die Überprüfung immer fehlschlagen wird. Um einen mit Ihrem System voll kompatiblen Rettungsdatenträger zu erstellen, wählen Sie „System“ &gt; „Rettungsdatenträger erstellen ...“.</string>
     <string lang="de" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">Der VeraCrypt-Rettungsdatenträger wurde erfolgreich überprüft.</string>
@@ -1406,6 +1406,11 @@
     <string lang="de" key="TIME">Zeit</string>
     <string lang="de" key="ITERATIONS">Iterationen</string>
     <string lang="de" key="PRE-BOOT">Prä-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.el.xml

@@ -261,7 +261,7 @@
     <control lang="el" key="IDM_UNMOUNTALL">Εκφόρτωση όλων των φορτωμένων τόμων</control>
     <control lang="el" key="IDM_UNMOUNT_VOLUME">Εκφόρτωση τόμων</control>
     <control lang="el" key="IDM_VERIFY_RESCUE_DISK">Επαλήθευση Δίσκου Ασφαλείας</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="el" key="IDM_VERSION_HISTORY">Ιστορικό εκδόσεων</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="el" key="IDM_VOLUME_PROPERTIES">Ιδιότητες τόμου</control>
@@ -965,11 +965,11 @@
     <string lang="el" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Αφού πιέσετε ΟΚ, θα επιλέξετε ένα όνομα για την εικόνα ISO του νέου Δίσκου Ασφαλείας VeraCrypt και την τοποθεσία που θέλετε να την τοποθετήσετε.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="el" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Παρακαλώ εισάγετε το Δίσκο Ασφαλείας VeraCrypt στον οδηγό CD/DVD και πιέστε ΟΚ για να τον επαληθεύσετε.</string>
+    <string lang="el" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Παρακαλώ εισάγετε το Ασφαλείας VeraCrypt πιέστε ΟΚ για να τον επαληθεύσετε.</string>
     <string lang="el" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Ο Δίσκος Ασφαλείας VeraCrypt επαληθεύτηκε επιτυχώς.</string>
     <string lang="el" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Αδύνατη η επαλήθευση εγγραφής του Δίσκου Ασφαλείας.\n\nΑν τον έχετε εγγράψει παρακαλώ εξάγετε και εισάγετε το CD/DVD και δοκιμάστε ξανά. Αν αυτό δε βοηθήσει δοκιμάστε άλλο λογισμικό εγγραφής CD/DVD και/ή άλλο μέσο.\n\nΑν επιχειρήσατε να επαληθεύσετε ένα Δίσκο Ασφαλέιας δημιουργημένο για διαφορετικό βασικό κλειδί, κωδικό κλπ, σημειώστε ότι ένας τέτοιος Δίσκος θα αποτυγχάνει πάντα στην επαλήθευση. Για να δημιουργήσετε ένα νέο Δίσκο πλήρως συμβατό με τις τρέχουσες ρυθμίσεις σας επιλέξτε 'Σύστημα' &gt; 'Δημιουργία Δίσκου Ασφαλείας'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="el" key="ERROR_CREATING_RESCUE_DISK">Σφάλμα δημιουργίας Δίσκου Ασφαλείας VeraCrypt.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.es.xml

@@ -261,7 +261,7 @@
     <control lang="es" key="IDM_UNMOUNTALL">Desmontar Todos los Volúmenes Montados</control>
     <control lang="es" key="IDM_UNMOUNT_VOLUME">Desmontar Volumen</control>
     <control lang="es" key="IDM_VERIFY_RESCUE_DISK">Verificar Disco de Rescate</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="es" key="IDM_VERSION_HISTORY">Historial de Versiones</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="es" key="IDM_VOLUME_PROPERTIES">Propiedades de Volumen</control>
@@ -962,14 +962,14 @@
     <string lang="es" key="VOLUME_HAS_NO_BACKUP_HEADER">No hay ninguna copia de seguridad insertada en este volumen (recuerde que sólo los volúmenes creados por VeraCrypt 6.0 o posterior contienen copias de seguridad de cabecera insertadas).</string>
     <string lang="es" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Está intentando realizar copias de seguridad de la cabecera de la partición/unidad del sistema. Esto no está permitido. Las operaciones de copia de seguridad o restauración relacionadas con la partición/unidad del sistema sólo se pueden realizar usando el Disco de Rescate VeraCrypt.\n\n¿Desea crear un Disco de Rescate VeraCrypt?</string>
     <string lang="es" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Está intentando restaurar la cabecera de un volumen virtual VeraCrypt pero ha seleccionado la partición/unidad del sistema. Esto no está permitido. Las operaciones de copia de seguridad o restauración relacionadas con la partición/unidad del sistema sólo se pueden realizar usando el Disco de Rescate VeraCrypt.\n\n¿Desea crear un Disco de Rescate VeraCrypt?</string>
-    <string lang="es" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Después de pulsar Aceptar, seleccionará un nombre de archivo para la nueva imagen ISO del Disco de Rescate VeraCrypt y la ubicación donde desea colocarla.</string>
+    <string lang="es" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Después de pulsar Aceptar, seleccionará un nombre de archivo para la nueva imagen del Disco de Rescate VeraCrypt y la ubicación donde desea colocarla.</string>
     <string lang="es" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">La imagen del Disco de Rescate ha sido creada y almacenada en este archivo:\n%s\n\nAhora hay que grabar dicha imagen en un CD o DVD.\n\nIMPORTANTE: Tenga en cuenta que el archivo debe ser grabado en el CD/DVD como una imagen de disco ISO (no como un archivo individual). Para obtener información sobre cómo hacerlo, lea la documentación de su software de grabación CD/DVD.\n\nTras grabar el Disco de Rescate, seleccione 'Sistema' &gt; 'Verificar Disco de Rescate' para verificar que ha sido grabado correctamente.</string>
     <string lang="es" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">La imagen del Disco de Rescate ha sido creada y almacenada en este archivo:\n%s\n\nAhora hay que grabar dicha imagen en un CD o DVD.\n\n¿Desea ejecutar el Grabador de Imágenes de Disco de Windows?\n\nNota: tras grabar el Disco de Rescate, seleccione 'Sistema' &gt; 'Verificar Disco de Rescate' para verificar que ha sido grabado correctamente.</string>
-    <string lang="es" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Por favor inserte su Disco de Rescate VeraCrypt dentro de su unidad de CD/DVD y presione Aceptar para verificarlo.</string>
+    <string lang="es" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Por favor inserte su Disco de Rescate VeraCrypt y presione Aceptar para verificarlo.</string>
     <string lang="es" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">El Disco de Rescate VeraCrypt ha sido verificado con éxito.</string>
     <string lang="es" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">No se puede verificar el Disco de Rescate ha sido grabado correctamente.\n\nSi ha grabado el Disco de Rescate, expulse e inserte de nuevo el CD/DVD; después verifique otra vez. Si no funciona, pruebe con otro software de grabación y/o otro CD/DVD.\n\nSi está intentando verificar un Disco de Rescate VeraCrypt creado para otra clave maestra, contraseña, etc., por favor recuerde que ese Disco de Rescate fallará siempre esta verificación. Para crear un nuevo Disco de Rescate completamente compatible con su configuración actual, seleccione 'Sistema' &gt; 'Crear Disco de Rescate'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="es" key="ERROR_CREATING_RESCUE_DISK">Error creando Disco de Rescate VeraCrypt.</string>
     <string lang="es" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">No se puede crear un Disco de Rescate VeraCrypt cuando un sistema operativo oculto se está ejecutando.\n\nPara crear un Disco de Rescate VeraCrypt, arranque el sistema operativo señuelo y seleccione 'Sistema' &gt; 'Crear Disco de Rescate'.</string>
     <string lang="es" key="RESCUE_DISK_CHECK_FAILED">No se puede verificar que el Disco de Rescate ha sido grabado correctamente.\n\nSi ha grabado el Disco de Rescate, expulse e inserte de nuevo el CD/DVD; después haga click en Siguiente para reintentarlo. Si no funciona, pruebe otro medio%s.\n\nSi no ha grabado aún el Disco de Rescate, hágalo y pulse Siguiente.\n\nSi está intentando verificar un Disco de Rescate VeraCrypt creado antes de iniciar este asistente, tenga en cuenta que dicho Disco de Rescate no se puede usar, porque fue creado para una clave maestra diferente. Necesita grabar el Disco de Rescate generado recientemente.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.et.xml

@@ -261,7 +261,7 @@
     <control lang="et" key="IDM_UNMOUNTALL">Haagi lahti kõik haagitud konteinerid</control>
     <control lang="et" key="IDM_UNMOUNT_VOLUME">Konteineri lahtihaakimine</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="et" key="IDM_VERSION_HISTORY">Versiooni ajalugu</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="et" key="IDM_VOLUME_PROPERTIES">Konteineri atribuudid</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.eu.xml

@@ -261,7 +261,7 @@
     <control lang="eu" key="IDM_UNMOUNTALL">Muntatutako bolumen guztiak desmuntatu</control>
     <control lang="eu" key="IDM_UNMOUNT_VOLUME">Bolumena desmuntatu</control>
     <control lang="eu" key="IDM_VERIFY_RESCUE_DISK">Salbatze diska egiaztatu</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="eu" key="IDM_VERSION_HISTORY">Bertsioen Historia</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="eu" key="IDM_VOLUME_PROPERTIES">Bolumenaren ezaugarriak</control>
@@ -962,14 +962,14 @@
     <string lang="eu" key="VOLUME_HAS_NO_BACKUP_HEADER">Bolumen honetan ez dago kapsulatutako goiburuaren babeskopiarik (Ohartu zaitez VeraCrypt 6.0 edo geroagoko programekin sortutako bolumenek bakarrik daukatela kapsulatutako goiburuaren babeskopiak).</string>
     <string lang="eu" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Sistemaren partizioa/unitatearen goiburuaren babeskopia egiten saiatzen ari zara. Hau ez dago onartua. Sistemaren unitate/partizioaren babeskopia egiteko edo babeskopiatik leheneratzeko beharrezkoa da VeraCrypt Salbatze Diska erabiltzea.\n\nVeraCrypt-en Salbatze Diska sortu nahi?</string>
     <string lang="eu" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">VeraCrypt bolumen birtual baten goiburua leheneratzen saiatzen ari zara baina sistemaren partizio/unitatearen bolumena aukeratu duzu. Hau ez dago onartuta. Sistemaren partizioa/unitatean babeskopia eta leheneratze eragiketak VeraCrypt Salbatze Diska erabiliz bakarrik egin daitezke.\n\nVeraCrypt Salbatze Diska sortu nahi?</string>
-    <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">'Ados' sakatu eta gero, VeraCrypt-en Salbatze Diskaren ISO irudia gordetzeko izena eta hura gorde nahi duzun tokia hautatu beharko dituzu</string>
+    <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">'Ados' sakatu eta gero, VeraCrypt-en Salbatze Diskaren irudia gordetzeko izena eta hura gorde nahi duzun tokia hautatu beharko dituzu</string>
     <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Salbatze Diskaren irudia sortu da eta fitxategi honetan gorde da:\n%s\n\nOrain Salbatze Diskaren irudi hori CD edo DVD batean idatzi behar duzu.\n\nGARRANTZITSUA: Ohartu zaitez fitxategia ISO diska irudi baten moduan idatzi behar dela CD/DVD-an (ez fitxategi bat bezala). Hori egiteko informazio gehiago behar baduzu, zure CD/DVD-ak grabatzeko softwarearen dokumentazioa irakurri ezazu.\n\nSalbatze Diska idatzi eta gero, 'Sistema' &gt; 'Salbatze Diska egiaztatu' aukeratu ezazu ondo idatzi dela ziurtatzeko.</string>
     <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Salbatze Diska sortu da eta ondorengo fitxategian sortu da:\n%s\n\nOrain Salbatze Diskaren irudia CD edo DVD batean idatzi behar duzu.\n\nMicrosoft Windows-en Diska Irudi Idazlea abiatu nahi al duzu?\nOharra: Salbatze Diska idatzi eta gero, 'Sistema' &gt; 'Salbatze Diska Egiaztatu' aukeratu ezazu ondo idatzi dela ziurtatzeko.</string>
-    <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Mesedez, zure VeraCrypt Salbatze Diska zure CD/DVD unitatean sartu ezazu eta Ados klikatu hura egiaztatzeko.</string>
+    <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Mesedez, zure VeraCrypt Salbatze Diska zure ezazu eta Ados klikatu hura egiaztatzeko.</string>
     <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt salbatze diska arazorik aurkitu gabe egiaztatu da.</string>
     <string lang="eu" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Ezin da egiaztatu Salbatze Diska akatsik gabe idatzi dela.\n\nSalbatze Diska idatzi baduzu, mesedez, CD/DVD-a atera eta berriz sartu ezazu; gero berriro saiatu. Honek laguntzen ez badu, saiatu zaitez CD/DVD-ak idazteko beste programa batekin edo beste gailu batean idazten.\n\nBeste gako nagusi, pasahitz e.a. ezberdin batentzako sortu den VeraCrypt Salbatze Diska egiaztatzen saiatzen bazara, ohartu zaitez Salbatze Diskak egiaztatze honetan beti errorea emango duela. Daukazun konfigurazioarekin guztiz bateragarria den Salbatze Diska Sortzeko, 'Sistema' &gt; 'Salbatze Diska Sortu' aukeratu ezazu.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="eu" key="ERROR_CREATING_RESCUE_DISK">TrueCryp-en Salbatze Diska Sortzerakoan Errorea.</string>
     <string lang="eu" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt-en Salbatze Diska ezin da sortu ezkutuko sistema eragile bat martxan dagoenean.\n\nVeraCrypt-en Salbatze Diska sortzeko, sistema eragile amua hasieratu eta 'Sistema' &gt; 'Salbatze Diska Sortu' aukeratu ezazu.</string>
     <string lang="eu" key="RESCUE_DISK_CHECK_FAILED">&gt;Ezin da egiaztatu Salbatze Diska akatsik gabe idatzi dela.\n\nSalbatze Diska idatzi baduzu, mesedez, CD/DVD-a atera eta berriz sartu ezazu; gero 'Hurrengoa' sakatu eta berriro klik egin ezazu. Honek lagunzten ez badu beste gailu batekin %s saiatu zaitez.\n\nSalbatze Diska oraindik idatzi ez baduzu, mesedez, hori egin ezazu eta 'Hurrengoa' sakatu\n\nLaguntzaile hau hasi baino lehen egindago VeraCrypt Salbatze Diska bat egiaztatzen saiatzen bazara, ohartu zaitez Salbatze Diska hori ezin izango dela erabili, gako nagusi ezberdin batentzako sortu baitzen. Orain sortutako Salbatze Diska idatzi behar duzu.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.fa.xml

@@ -261,7 +261,7 @@
     <control lang="en" key="IDM_UNMOUNTALL">Dismount All Mounted Volumes</control>
     <control lang="en" key="IDM_UNMOUNT_VOLUME">Dismount Volume</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="en" key="IDM_VERSION_HISTORY">Version History</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="en" key="IDM_VOLUME_PROPERTIES">Volume Properties</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.fi.xml

@@ -261,7 +261,7 @@
     <control lang="fi" key="IDM_UNMOUNTALL">Poista Yhteys Kaikilta Yhdistetyiltä Taltioilta</control>
     <control lang="fi" key="IDM_UNMOUNT_VOLUME">Poista Yhdistetyt Taltio</control>
     <control lang="fi" key="IDM_VERIFY_RESCUE_DISK">Tarkista Pelastuslevy</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="fi" key="IDM_VERSION_HISTORY">Versio Historia</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="fi" key="IDM_VOLUME_PROPERTIES">Taltion Ominaisuudet</control>
@@ -965,11 +965,11 @@
     <string lang="fi" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Kun olet painanut OK, valitse tiedoston mini uudelle VeraCrypt Pelastuslevyn ISO imagelle ja talletus sijainti sille.</string>
     <string lang="fi" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Pelastuslevy on luotu ja talletettu tähän tiedostoon: %s\n\nNyt sinun tulee kirjoittaa (polttaa) Pelastuslevy CD tai DVD:lle.\n\nTÄRKEÄÄ: Huomioi, että tiedosto täytyy kirjoittaa CD/DVD:lle kuten ISO levyimagena (ei yksittäisenä tiedostona). Tietoa siitä miten tämä tehdään,katso CD/DVD ohjelmiston manuaalista.\n\nKun poltat Pelastuslevyn, valitse 'Järjestelmä' &gt; 'Tarkista Pelastuslevy' tarkistaaksesi että Pelastuslevyn poltto onnistui.</string>
     <string lang="fi" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Pelastuslevy on luotu ja tallennettu tiedostoon: %s\n\nNyt sinun tarvitsee polttaa Pelastuslevy tiedosto CD tai DVD-levylle.\n\nHaluatko käynnistää Microsoft Windows Levytiedosto polton nyt?\n\nHuomioi: Kun olet polttanut Pelastuslevyn, valitse 'Järjestelmä' &gt; 'Takista Pelastuslevy että se on oikein poltettu.</string>
-    <string lang="fi" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Aseta VeraCrypt Pelastuslevy CD/DVD asemaan ja paina OK tarkistaaksesi sen.</string>
+    <string lang="fi" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Aseta VeraCrypt Pelastuslevy paina OK tarkistaaksesi sen.</string>
     <string lang="fi" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt Pelastuslevy onnistuneesti tarkistettu.</string>
     <string lang="fi" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Ei voida tarkistaa onko Pelastuslevyn poltettu oikein.\n\nJos olet polttanut Pelastu Levyn, poista ja uudelleen aseta CD/DVD levy ja yritä uudelleen. Jos tämä ei auta, koita toista CD/DVD levyn poltto ohjelmaa ja/tai välinettä.\n\nJos yritit tarkistaa VeraCrypt Pelastuslevyä luotuna eri pää avaimella, salasana, tmv., huomioi tämä että tällainen Pelastuslevy aina epäonnistuu tässä tarkistuksessa. Luodaksesi uuden yhteensopivan Pelastuslevyn nykyisellä konfiguraatiollasi, valitse 'Järjestelmä' &gt; 'Luo Pelastuslevy'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="fi" key="ERROR_CREATING_RESCUE_DISK">Virhe luotaessa VeraCrypt Pelastuslevyä.</string>
     <string lang="fi" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Pelastuslevy ei voida luoda kun piilotettu käyttöjärjestelmä on käynnissä.\n\nLuodaksesi VeraCrypt Pelastuslevyn, käynnistä houkutuslintuna oleva käyttöjärjestelmä ja sitten valitse 'Järjestelmä' &gt; 'Luo Pelastuslevy'.</string>
     <string lang="fi" key="RESCUE_DISK_CHECK_FAILED">Ei voida tarkistaa Pelastuslevyä onko sen oikein poltettu.\n\nJos poltit Pelastuslevyn, poista se asemasta ja aseta uudelleen CD/DVD asemaan; sitten paina jälleen Seuraava nappia. Jos tämä ei auta, koita toista levyä%s.\n\nJos et ole polttanut Pelastuslevyä vielä, tee se, ja paina sitten Seuraava.\n\nJos yritit tarkistaa VeraCrypt Pelastuslevyä joka luotiin ennen kuin aloitit tämän ohjatun opastuksen, huomioi se, että tällaista Pelastuslevyä ei voida käyttää, koska se on luotu eri pääavaimelle. Sinun täytyy polttaa vasta tehty Pelastuslevy.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.fr.xml

@@ -261,7 +261,7 @@
     <control lang="fr" key="IDM_UNMOUNTALL">Démonter tous les volumes montés</control>
     <control lang="fr" key="IDM_UNMOUNT_VOLUME">Démonter le volume</control>
     <control lang="fr" key="IDM_VERIFY_RESCUE_DISK">Vérifier le disque de secours</control>
-    <control lang="fr" key="IDM_VERIFY_RESCUE_DISK_ISO">Vérifier l'image ISO du disque de secours</control>
+    <control lang="fr" key="IDM_VERIFY_RESCUE_DISK_ISO">Vérifier l'image du disque de secours</control>
     <control lang="fr" key="IDM_VERSION_HISTORY">Historique</control>
     <control lang="fr" key="IDM_VOLUME_EXPANDER">Agrandir un volume</control>
     <control lang="fr" key="IDM_VOLUME_PROPERTIES">Propriétés du volume</control>
@@ -962,14 +962,14 @@
     <string lang="fr" key="VOLUME_HAS_NO_BACKUP_HEADER">Il n'y a pas de sauvegarde d'en-tête intégrée dans ce volume (seuls les volumes créés avec VeraCrypt 6.0 et ultérieur contiennent des en-têtes de sauvegarde intégrés).</string>
     <string lang="fr" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Vous essayez de sauvegarder l'en-tête de la partition/du disque système. Cela n'est pas autorisé. Toute opération de sauvegarde/restauration concernant la partition/le disque système ne peut être effectué qu'en utilisant le disque de secours VeraCrypt.\n\nVoulez-vous créer un disque de secours VeraCrypt ?</string>
     <string lang="fr" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Vous essayez de restaurer l'en-tête d'un volume virtuel VeraCrypt mais vous avez sélectionné la partition/le disque système.  Cela n'est pas autorisé. Toute opération de sauvegarde/restauration concernant la partition/le disque système ne peut être effectué qu'en utilisant le disque de secours VeraCrypt.\n\nVoulez-vous créer un disque de secours VeraCrypt ?</string>
-    <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Après avoir cliqué sur 'OK', vous sélectionnerez un nom de fichier et un emplacement pour la nouvelle image ISO du disque de secours VeraCrypt.</string>
+    <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Après avoir cliqué sur 'OK', vous sélectionnerez un nom de fichier et un emplacement pour la nouvelle image du disque de secours VeraCrypt.</string>
     <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">L'image du disque de secours a été créée et stockée dans ce fichier :\n%s\n\nMaintenant vous avez besoin de graver l'image du disque de secours sur un CD ou DVD.\n\nIMPORTANT : Notez que le fichier doit être écrit sur le CD/DVD sous forme d'image de disque ISO (pas dans un fichier individuel). Pour plus d'informations sur la façon de le faire, veuillez vous reporter à la documentation d'utilisation de votre logiciel de gravure.\n\nAprès avoir graver le disque de secours, sélectionnez « Système » &gt; « Vérifier le disque de secours » pour vérifier qu'il a été graver correctement.</string>
     <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">L'image du disque de secours a été créée et stockée dans ce fichier :\n%s\n\nMaintenant vous avez besoin de graver l'image du disque de secours sur un CD ou un DVD.\n\nSouhaitez-vous lancer maintenant le logiciel de gravure Microsoft ?\n\nRemarque : Après avoir graver le disque de secours, sélectionnez « Système » &gt; « Vérifier le disque de secours » pour vérifier qu'il a été graver correctement.</string>
-    <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Insérez votre disque de secours VeraCrypt dans votre lecteur de CD/DVD et cliquez sur 'OK' pour le vérifier.</string>
+    <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Insérez votre disque de secours VeraCrypt et cliquez sur 'OK' pour le vérifier.</string>
     <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Le disque de secours VeraCrypt a été vérifié avec succès.</string>
     <string lang="fr" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Impossible de vérifier que le disque de secours a été correctement gravé.\n\nSi vous avez gravé le disque de secours, éjectez-le et réinsérez-le puis essayez à nouveau. Si cela n'aide pas, essayez un autre logiciel de gravure ou un autre support.\n\nSi vous essayez de vérifier un disque de secours créé pour une clé principale différente, un mot de passe différent, etc... dans ce cas la vérification échouera à tous les coups. Pour créer un nouveau disque de secours totalement compatible avec votre configuration actuelle, sélectionnez 'Système' &gt; 'Créer un disque de secours'.</string>
-    <string lang="fr" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">L'image ISO du disque de secours VeraCrypt a été vérifiée avec succès.</string>
+    <string lang="fr" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">L'image du disque de secours VeraCrypt a été vérifiée avec succès.</string>
-    <string lang="fr" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">La vérification de l'image ISO du disque de secours a échoué.\n\nSi vous essayez de vérifier une image ISO de disque de secours créé pour une clé principale différente, un mot de passe différent, etc... dans ce cas la vérification échouera à tous les coups. Pour créer une nouvelle image ISO du disque de secours totalement compatible avec votre configuration actuelle, sélectionnez 'Système' &gt; 'Créer un disque de secours'.</string>
+    <string lang="fr" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">La vérification de l'image du disque de secours a échoué.\n\nSi vous essayez de vérifier une image de disque de secours créé pour une clé principale différente, un mot de passe différent, etc... dans ce cas la vérification échouera à tous les coups. Pour créer une nouvelle image du disque de secours totalement compatible avec votre configuration actuelle, sélectionnez 'Système' &gt; 'Créer un disque de secours'.</string>
     <string lang="fr" key="ERROR_CREATING_RESCUE_DISK">Erreur lors de la création du disque de secours VeraCrypt.</string>
     <string lang="fr" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Le disque de secours VeraCrypt ne peut pas être créé quand un système d'exploitation caché est en cours d'exécution.\n\nPour créer un disque de secours VeraCrypt, démarrez le système d'exploitation leurre puis sélectionnez 'Système' &gt; 'Créer un disque de secours'.</string>
     <string lang="fr" key="RESCUE_DISK_CHECK_FAILED">Impossible de vérifier que le disque de secours a été correctement gravé.\n\nSi vous avez gravé le disque de secours, éjectez-le et réinsérez-le CD/DVD ; puis cliquez sur Suivant pour essayer à nouveau. Si cela ne fonctionne pas, essayez avec un autre media%s.\n\nSi vous n'avez pas encore gravé le disque de secours, veuillez le faire et  cliquez sur Suivant.\n\nSi vous a tenté de vérifier un disque de secours VeraCrypt créé avant de lancer cet Assistant, ce disque de secours ne peut pas être utilisé, car il a été créé pour une clé maître différente. Vous avez besoin de graver le disque de secours nouvellement généré.</string>
@@ -1406,6 +1406,11 @@
     <string lang="fr" key="TIME">Temps</string>
     <string lang="fr" key="ITERATIONS">Itérations</string>
     <string lang="fr" key="PRE-BOOT">Pré-Amorçage</string>
+    <string lang="fr" key="RESCUE_DISK_EFI_INFO">Avant de pouvoir chiffrer la partition, vous devez créer un disque de sauvegarde VeraCrypt (VRD), dont les buts sont :\n\n- Si le chargeur de démarrage de VeraCrypt, la clé principale ou d'autres données critiques sont endommagées, le VRD permet de les restaurer (remarquez que vous devrez toujours entrer le mot de passe correct).\n\n- Si Windows est endommagé et ne peut pas démarrer, VRD vous permet toujours de déchiffrer la partition avant le démarrage de Windows.\n\n- Le VRD contiendra une sauvegarde du contenu actuel du chargeur de système EFI et vous permettra de le restaurer si necessaire.\n\n L'image ZIP du disque de récupération VeraCrypt sera créée à l'emplacement spécifié ci-dessous.</string>
+    <string lang="fr" key="RESCUE_DISK_EFI_EXTRACT_INFO">L'image ZIP du disque de secours a été créé et stocké dans le fichier : \n%s\n\nMainteant vous avez besoin de la décompresser dans une clef USB formattée en FAT/FAT32.\n\n%lsAprès l'avoir créé, cliquez sur suivant pour vérifier qu'il a été créé correctement.</string>
+    <string lang="fr" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">L'image ZIP du disque de secours a été créé et stocké dans le fichier : \n%s\n\nVous devriez maintenant décompresser l'image dans une clef USB formattée en FAT/FAT32 ou la déplacer vers un emplacement sécurisé pour une utilisation ultérieure.\n\n%lsCliquez sur "Suivant" pour continuer.</string>
+    <string lang="fr" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT : Le fichier ZIP doit être décompressé directement à la racine de la clef USB. Par exemple, si la lettre E: est attribuée à la clef USB, alors la décompression du fichier zip devrait créer un répertoire E:\\EFI sur la clef USB.\n\n</string>
+    <string lang="fr" key="RESCUE_DISK_EFI_CHECK_FAILED">Impossible de vérifier que le disque de secours a été correctement décompressé.\n\nSi vous avez décompressé le disque de secours dans une clef USB, éjectez-la et réinsérez-la ; puis cliquez sur Suivant pour essayer à nouveau. Si cela ne fonctionne pas, essayez avec une autre clef USB et/ou un autre logiciel ZIP.\n\nSi vous n'avez pas encore décompressé le disque de secours, veuillez le faire et cliquez sur Suivant.\n\nSi vous a tenté de vérifier un disque de secours VeraCrypt créé avant de lancer cet Assistant, ce disque de secours ne peut pas être utilisé, car il a été créé pour une clé maître différente. Vous avez besoin de graver le disque de secours nouvellement généré.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.hu.xml

@@ -261,7 +261,7 @@
     <control lang="hu" key="IDM_UNMOUNTALL">Az összes felcsatolt kötet leválasztása</control>
     <control lang="hu" key="IDM_UNMOUNT_VOLUME">Kötet leválasztása</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="hu" key="IDM_VERSION_HISTORY">Verzió történet</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="hu" key="IDM_VOLUME_PROPERTIES">Kötet tulajdonságok</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.id.xml

@@ -261,7 +261,7 @@
     <control lang="id" key="IDM_UNMOUNTALL">Putuskan semua Volume yang tersambung</control>
     <control lang="id" key="IDM_UNMOUNT_VOLUME">Putuskan Volume</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="id" key="IDM_VERSION_HISTORY">Sejarah...</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="id" key="IDM_VOLUME_PROPERTIES">Profil Volume</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.it.xml

@@ -261,7 +261,7 @@
     <control lang="it" key="IDM_UNMOUNTALL">Smonta tutti i volumi montati</control>
     <control lang="it" key="IDM_UNMOUNT_VOLUME">Smonta il volume</control>
     <control lang="it" key="IDM_VERIFY_RESCUE_DISK">Verifica disco di ripristino</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="it" key="IDM_VERSION_HISTORY">Cronologia delle versioni</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="it" key="IDM_VOLUME_PROPERTIES">Proprietà del volume...</control>
@@ -962,14 +962,14 @@
     <string lang="it" key="VOLUME_HAS_NO_BACKUP_HEADER">Non esiste nessun file di backup testa in questo volume (notate che solamente i volumi creati con VeraCrypt 6.0 o successivo contengono il file backup testa volume).</string>
     <string lang="it" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">State tentando di fare il backup della testa della partizione/disco di sistema. Questo non è consentito. Le operazioni di backup/ripristino sono pertinenti alla partizione/disco di sistema e possono essere eseguite solamente con il disco di ripristino di VeraCrypt\n\nVolete creare un disco di ripristino di VeraCrypt?</string>
     <string lang="it" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">State tentando di ripristinare la testa del volume virtuale di VeraCrypt ma avete selezionato la partizione/disco di sistema. Questo non è consentito. Le operazioni di backup/ripristino sono pertinenti alla partizione/disco di sistema e possono essere eseguite solamente con il disco di ripristino di VeraCrypt.\n\nVolete creare un disco di ripristino di VeraCrypt?</string>
-    <string lang="it" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Dopo aver fatto click su OK, dovete selezionare un nome file per il nuovo file immagine ISO per il disco di ripristino di VeraCrypt ed il percorso dove volete salvarlo.</string>
+    <string lang="it" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Dopo aver fatto click su OK, dovete selezionare un nome file per il nuovo file immagine per il disco di ripristino di VeraCrypt ed il percorso dove volete salvarlo.</string>
     <string lang="it" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">L'immagine del disco di ripristino è stata creata e salvata in questo file:\n%s\n\nDovete ora scrivere l'immagine in un CD o DVD.\n\nIMPORTANTE: Notate che questo file deve essere scritto in CD/DVD come immsgine disco ISO (non come un file individuale). Per informazioni su come fare questo, riferitevi alls documentazione del vostro software registrazione CD/DVD.\n\nDopo la scrittura del disco, selezionare 'Sistema' &gt; 'Verifica disco di emergenza' per verificare che il disco sia stato scritto correttamente.</string>
     <string lang="it" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">L'immagine del disco di ripristino è stata creata e salvata in questo file:\n%s\n\nDovete ora scrivere l'immagine in un CD o DVD.\n\nVolete lanciare ora Microsoft Windows Disc Image Burner?\n\nNota: dopo la scrittura del disco, selezionare 'Sistema' &gt; 'Verifica disco di emergenza' per verificare che il disco sia stato scritto correttamente.</string>
-    <string lang="it" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Inserite il vostro disco di ripristino di VeraCrypt nel lettore CD/DVD e fate click su OK per verificarlo.</string>
+    <string lang="it" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Inserite il vostro disco di ripristino di VeraCrypt e fate click su OK per verificarlo.</string>
     <string lang="it" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Il disco di ripristino di VeraCrypt è stato verificato con successo.</string>
     <string lang="it" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Non è possibile verificare se il disco di ripristino è stato creato correttamente.\n\nSe avete scritto il disco di ripristino, espellete e reinserite il  CD/DVD e ritentate. Se questo non vi aiuta, provate con altri software di masterizzazione CD/DVD e/o altre apparecchiature.\n\nSe tentate di verificare un disco di ripristino di VeraCrypt creato per una chiave master differente, password, ecc., dovete notare che questo disco di ripristino fallirà sempre questa verifica. Per creare un nuovo disco di ripristino compatibile pienamente con la vostra configurazione corrente selezionate ‘Sistema’&gt;'Crea disco di ripristino'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="it" key="ERROR_CREATING_RESCUE_DISK">Errore nella creazione del disco di ripristino.</string>
     <string lang="it" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Il disco di ripristino di VeraCrypt non può essere creato quando un sistema operativo nascosto è in esecuzione.\n\nPer creare un disco di ripristino di VeraCrypt, avviate il sistema operativo di richiamo e quindi selezionate 'Sistema'&gt; 'Crea disco di ripristino'.</string>
     <string lang="it" key="RESCUE_DISK_CHECK_FAILED">Impossibile verificare se il disco di ripristino sia stato scritto correttamente.\n\nSe avete scritto il disco di ripristino, espellete e reinserite il CD/DVD; quindi fate clic su Avanti per ritentare. Se questo non vi aiuta, tentare con un altro supporto%s.\n\nSe non avete ancora masterizzato il disco di ripristino, fatelo e quindi fate clic su Avanti.\n\nSe tentate di verificare un disco di ripristino di VeraCrypt creato prima di avviare questa procedura, notare che questo disco non può essere utilizzato in quanto creato per una chiave master differente. Dovete masterizzare il disco di ripristino generato nuovamente.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.ja.xml

@@ -261,7 +261,7 @@
     <control lang="ja" key="IDM_UNMOUNTALL">全てのボリュームをアンマウント</control>
     <control lang="ja" key="IDM_UNMOUNT_VOLUME">ボリュームをアンマウント</control>
     <control lang="ja" key="IDM_VERIFY_RESCUE_DISK">レスキューディスクのベリファイ</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="ja" key="IDM_VERSION_HISTORY">バージョン履歴</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="ja" key="IDM_VOLUME_PROPERTIES">ボリュームのプロパティ</control>
@@ -965,11 +965,11 @@
     <string lang="ja" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">「OK」をクリックして、VeraCryptレスキューディスクのISOイメージの新しいファイル名、および保存場所を指定してください。</string>
     <string lang="ja" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">レスキューディスクのイメージファイルが次の名前で作成されました： %s\n\n次にレスキューディスクをCDかDVDに書き込む必要があります。\n\n重要：このファイルは個別のファイルとしてではなく、ISOディスクイメージとしてCD/DVDに書き込まなければなりません。具体的な方法はお使いのレコーディングソフトのマニュアルを参照してください。\n\nレスキューディスクを作成後、メニューから[システム]-[レスキューディスクの検証]を選択し、正しく作成されたかを検証してください。</string>
     <string lang="ja" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">レスキューディスクのイメージファイルが次の名前で作成されました： %s\n\n次にレスキューディスクをCDかDVDに書き込む必要があります。\n\nWindowsディスクイメージ書き込みツールを起動しますか？\n\n注：レスキューディスクを作成後、メニューから[システム]-[レスキューディスクの検証]を選択し、正しく作成されたかを検証してください。</string>
-    <string lang="ja" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">VeraCryptレスキューディスクをCD/DVDドライブに挿入してから「OK」を押すと検証します。</string>
+    <string lang="ja" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">VeraCryptレスキューディスクをから「OK」を押すと検証します。</string>
     <string lang="ja" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCryptレスキューディスクの検証に成功しました。</string>
     <string lang="ja" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">レスキューディスクが正しく作成されているか検証できませんでした。\n\nレスキューディスクをお持ちなら、CD/DVDをいったん排出してから再度挿入してみてください。もしこの方法でダメなら、他のレコーディングソフトあるいはメディアを使ってみてください。\n\nもし別のマスターキー、パスワード、ソルトを設定して作られたレスキューディスクを検証しようとしているのであれば、これは常に検証に失敗します。現在の設定に適合したレスキューディスクを作成するには、メニューから[システム]-[レスキューディスクの作成]を選択してください。</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="ja" key="ERROR_CREATING_RESCUE_DISK">VeraCryptレスキューディスクの作成中にエラーが発生しました。</string>
     <string lang="ja" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">隠しOSの起動中はVeraCryptレスキューディスクを作成することができません。\n\nレスキューディスクを作成するためには、囮用OSを起動し、[システム]-[レスキューディスク作成]を選択してください。</string>
     <string lang="ja" key="RESCUE_DISK_CHECK_FAILED">レスキューディスクが正しく作成されているか検証できませんでした。\n\nもしレスキューディスクを作成したばかりであれば、CD/DVDをいったん排出してから再度挿入し「次へ」をクリックしてみてください。もしこの方法でダメなら、他のメディア%sを使ってみてください。\n\nもしまだレスキューディスクを作成していないのであれば、作成してから「次へ」をクリックしてください。\n\nもしこのウィザードを開始する前に作成されたVeraCryptレスキューディスクを検証しようとしているのであれば、そのようなディスクは使えません。それは異なるマスターキーのために作成されたものだからです。この場合は新たにレスキューディスクを作成する必要があります。</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.ka.xml

@@ -261,7 +261,7 @@
     <control lang="ka" key="IDM_UNMOUNTALL">ყველა ტომის გამოერთება</control>
     <control lang="ka" key="IDM_UNMOUNT_VOLUME">ტომის გამოერთება</control>
     <control lang="ka" key="IDM_VERIFY_RESCUE_DISK">აღმდგენი დისკის შემოწმება</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="ka" key="IDM_VERSION_HISTORY">ვერსიების ისტორია</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="ka" key="IDM_VOLUME_PROPERTIES">ტომის მახასიათებლები</control>
@@ -968,8 +968,8 @@
     <string lang="ka" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">მოათავსეთ VeraCrypt-ის აღმდგენი დისკი CD/DVD მოწყობილობაში და დაწკაპეთ OK.</string>
     <string lang="ka" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt-ის აღმდგენი დისკი წარმატებით შემოწმდა.</string>
     <string lang="ka" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">აღმდგენი დისკის ჩაწერის სისწორის შემოწმება ვერ მოხერხდა.\n\nთუ აღმდგენი დისკი ჩაწერილია, დისკი გამოიღეთ და ხელახლა ჩადეთ CD/DVD მოწყობილობაში. თუ ეს არ შველის, მაშინ გამოიყენეთ სხვა დისკი ან/და სხვა ჩამწერი პროგრამა.\n\nთუ ამოწმებთ სხვა მთავარი გასაღებისათვის, მარილისათვის და ა.შ. შექმნილ აღმდგენ დისკს, შემოწმება ყოველთვის მცდარ შედეგს აჩვენებს. მიმდინარე კონფიგურაციის თავსებადი აღმდგენი დისკის შექმნისათვის, აირჩიეთ სისტემა&gt;აღმდგენი დისკის შექმნა.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="ka" key="ERROR_CREATING_RESCUE_DISK">VeraCrypt-ის აღმდგენი დისკის Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.ko.xml

@@ -261,7 +261,7 @@
     <control lang="ko" key="IDM_UNMOUNTALL">삽입된 모든 볼륨 꺼내기</control>
     <control lang="ko" key="IDM_UNMOUNT_VOLUME">볼륨 꺼내기</control>
     <control lang="ko" key="IDM_VERIFY_RESCUE_DISK">응급복구 디스크 검증</control>
-    <control lang="ko" key="IDM_VERIFY_RESCUE_DISK_ISO">응급복구 디스크 ISO 검증</control>
+    <control lang="ko" key="IDM_VERIFY_RESCUE_DISK_ISO">응급복구 디스크 검증</control>
     <control lang="ko" key="IDM_VERSION_HISTORY">버전 히스토리</control>
     <control lang="ko" key="IDM_VOLUME_EXPANDER">볼륨확장기</control>
     <control lang="ko" key="IDM_VOLUME_PROPERTIES">볼륨 속성</control>
@@ -968,8 +968,8 @@
     <string lang="ko" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">검증하려면 VeraCrypt 응급복구 디스크를 CD/DVD 드라이브에 삽입한 다음 “확인”을 클릭하세요.</string>
     <string lang="ko" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt 응급복구 디스크를 성공적으로 검증했습니다.</string>
     <string lang="ko" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">응급복구 디스크가 올바르게 구워졌는지를 검증할 수 없습니다.\n\n응급복구 디스크를 구웠다면, CD/DVD를 꺼내서 다시 삽입한 다음 다시 시도해 주세요. 이것이 도움이 되지 않는 경우, 다른 CD/DVD 리코딩 소프트웨어 및 매체로 시도해 주세요.\n\n다른 마스터 키, 비밀번호, 소금 등을 위해 생성된 응급복구 디스크를 검증하려고 하는 경우, 그러한 응급복구 디스크는 항상 검증작업에 실패하게 됩니다. 현재 설정과 완전히 호환되는 새로운 응급복구 디스크를 만들려면, “시스템” ▶ “응급복구 디스크 만들기”를 선택하세요.</string>
-    <string lang="ko" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">VeraCrypt 응급복구 디스크 ISO가 성공적으로 확인되었습니다.</string>
+    <string lang="ko" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">VeraCrypt 응급복구 디스크 가 성공적으로 확인되었습니다.</string>
-    <string lang="ko" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">VeraCrypt 응급복구 디스크 ISO의 확인이 실패했습니다.\n\n만약 VeraCrypt의 응급복구 디스크를 다른 마스터 키, 비밀번호, 또한 소금(Salt) 등을 사용할 경우, 확인이 실패할경우를 주의하시기 바랍니다.</string>
+    <string lang="ko" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">VeraCrypt 응급복구 디스크 의 확인이 실패했습니다.\n\n만약 VeraCrypt의 응급복구 디스크를 다른 마스터 키, 비밀번호, 또한 소금(Salt) 등을 사용할 경우, 확인이 실패할경우를 주의하시기 바랍니다.</string>
     <string lang="ko" key="ERROR_CREATING_RESCUE_DISK">VeraCrypt 응급복구 디스크 만들기 오류.</string>
     <string lang="ko" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">숨긴 운영체제가 실행 중일 때 VeraCrypt 응급복구 디스크를 만들 수 없습니다.\n\nVeraCrypt 응급복구 디스크를 만들려면 미끼용 운영체제를 부팅한 다음 “시스템” ▶ “응급복구 디스크 만들기”를 선택하세요.</string>
     <string lang="ko" key="RESCUE_DISK_CHECK_FAILED">응급복구 디스크가 올바르게 구워졌는지를 검증할 수 없습니다.\n\n응급복구 디스크를 구웠다면, CD/DVD를 꺼내서 다시 삽입한 다음, “다음”을 클릭해서 다시 시도해 주세요. 이것이 도움이 되지 않는 경우, 다른 매체%s로 시도해 주십시오.\n\n아직 응급복구 디스크를 굽지 않았다면, 다음을 클릭하세요.\n\n이 마법사를 시작하기 전에 VeraCrypt 응급복구 디스크를 검증하려고 할 경우, 이러한 응급복구 디스크는 (다른 마스터 키를 위해 생성되었기 때문에) 사용될 수 없습니다. 새롭게 생성된 응급복구 디스크를 구울 필요가 있습니다.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.lv.xml

@@ -261,7 +261,7 @@
     <control lang="lv" key="IDM_UNMOUNTALL">Demontēt visus uzstādītos apgabalus</control>
     <control lang="lv" key="IDM_UNMOUNT_VOLUME">Demontēt apgabalu</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="lv" key="IDM_VERSION_HISTORY">Versijas vēsture</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="lv" key="IDM_VOLUME_PROPERTIES">Apgabala īpšības</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.my.xml

@@ -261,7 +261,7 @@
     <control lang="my" key="IDM_UNMOUNTALL">အစပျိုးထားသော Volumes အားလုံး အဆုံးသတ်ရန်</control>
     <control lang="my" key="IDM_UNMOUNT_VOLUME">Volume အဆုံးသတ်ရန်</control>
     <control lang="my" key="IDM_VERIFY_RESCUE_DISK">ကယ်ဆယ်ရေး Disk စစ်ဆေးရန်</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="my" key="IDM_VERSION_HISTORY">ဗားရှင်း မှတ်တမ်း</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="my" key="IDM_VOLUME_PROPERTIES">Volume ဂုဏ်အင်္ဂါရပ်များ</control>
@@ -970,8 +970,8 @@
     <string lang="my" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">VeraCrypt ဆယ်တင်ရေး အခွေကို သင့် CD/DVD drive ထဲ ထည့်ပြီး ၄င်းကို စစ်ဆေးရန် ကောင်းပြီး ခလုတ်ကို နှိပ်ပါ။</string>
     <string lang="my" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt ဆယ်တင်ရေး အခွေကို အောင်မြင်စွာ စစ်ဆေးလိုက်ပြီ။</string>
     <string lang="my" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">ဆယ်တင်ရေး အခွေကို မှန်မှန်ကန်ကန် ရေးကူးမှု ရှိမရှိ စစ်ဆေး၍ မရပါ။\n\nဆယ်တင်ရေး ​အခွေကို ကူးပြီးပါ​က၊ စီဒီ/ဒီဗွီဒီကို ထုတ်ပြီး ပြန်သွင်းကာ ထပ်စမ်းကြည့်ပါ။ အကယ်၍ အလုပ်မဖြစ်ပါက၊ အခြား  စီဒီ/ဒီဗွီဒီ ခွေကူး ဆော့ဗ်ဝဲ (သို့) ကြားခံဖြင့် ထပ်စမ်းကြည့်ပါ။\n\nအကယ်၍ သင်သည် အခြား မာစတာ ကီး၊ စကားဝှက်၊ salt နှင့် အခြားအတွက် ဖန်တီးထားသော VeraCrypt ဆယ်တင်ရေး အခွေကို စစ်ဆေးရန် ကြိုးပမ်း​နေပါက၊ ယင်းကဲ့သို့ ဆယ်တင်ရေး အခွေသည် ဤကဲ့သို့ စစ်ဆေးမှုကို အောင်မြင်မည် မဟုတ်ပါ။ သင့် လက်ရှိ ပြုပြင်ဖန်တီးမှုနှင့် ကိုက်ညီသော ဆယ်တင်ရေး အခွေသစ် တစ်ခုကို သင် ပြုလုပ်လိုပါက 'System' &gt; 'ဆယ်တင်ရေး ​အခွေ ဖန်တီးရန်' ကို ရွေးပါ။</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="my" key="ERROR_CREATING_RESCUE_DISK">VeraCrypt ဆယ်တင်ရေး အ​ခွေ ဖန်တီးမှု ချို့ယွင်းချက်။</string>
     <string lang="my" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">လျှို့ဝှက် OS ကို သုံးစွဲ​​နေစဉ် VeraCrypt ဆယ်တင်ရေး အခွေကို ဖန်တီး၍ မရပါ။\n\nVeraCrypt ဆယ်တင်ရေး အခွေကို ဖန်တီးရန်၊ မျက်လှည့် OS ကို ဖွင့်ပြီး 'System' &gt; 'ဆယ်တင်ရေး အခွေ ဖန်တီးရန်' ကို ရွေးပါ။</string>
     <string lang="my" key="RESCUE_DISK_CHECK_FAILED">ဆယ်တင်ရေး အခွေကို မှန်မှန်ကန်ကန် ရေးကူးမှု ရှိမရှိ စစ်ဆေး၍ မရပါ။\n\nဆယ်တင်ရေး ​အခွေကို ကူးပြီးပါ​က၊ စီဒီ/ဒီဗွီဒီကို ထုတ်ပြီး ပြန်သွင်းကာ ထပ်စမ်းကြည့်ပါ။ အကယ်၍ အလုပ်မဖြစ်ပါက၊ အခြား  စီဒီ/ဒီဗွီဒီ ခွေကူး ဆော့ဗ်ဝဲ (သို့) ကြားခံ %s ဖြင့် ထပ်စမ်းကြည့်ပါ။\n\nအကယ်၍ သင်သည် ဆယ်တင်ရေး အခွေကို မကူးသေးပါက၊ ယခု ကူးယူပြီးနောက်၊ ရှေ့သို့ ခလုတ်ကို နှိပ်ပါ။\n\n ဤအညွှန်းကို မဖွင့်မီ သင် ဖန်တီးခဲ့သော VeraCrypt ဆယ်တင်ရေး အခွေကို စစ်ဆေးရန် သင် ကြိုးပမ်းနေပါက၊ ယင်းကဲ့သို့ ဆယ်တင်ရေး အခွေကို သုံးစွဲနိုင်မည် မဟုတ်ပါ၊ အဘယ်ကြောင့် ဆိုသော် ၄င်းသည် အခြား မာစတာ ကီးအတွက် ဖန်တီးထား၍ ဖြစ်သည်။ အသစ် ထုတ်လုပ်ထားသော ဆယ်တင်ရေး အခွေကို သင် ကူးယူရန် လိုအပ်သည်။</string>
@@ -1408,6 +1408,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.nl.xml

@@ -261,7 +261,7 @@
     <control lang="nl" key="IDM_UNMOUNTALL">Ontkoppel alle gekoppelde volumes</control>
     <control lang="nl" key="IDM_UNMOUNT_VOLUME">Ontkoppel volume</control>
     <control lang="nl" key="IDM_VERIFY_RESCUE_DISK">Controleer reddingsschijf</control>
-    <control lang="nl" key="IDM_VERIFY_RESCUE_DISK_ISO">Controleer reddingsschijf ISO-bestand</control>
+    <control lang="nl" key="IDM_VERIFY_RESCUE_DISK_ISO">Controleer reddingsschijf bestand</control>
     <control lang="nl" key="IDM_VERSION_HISTORY">Versiegeschiedenis</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume expander</control>
     <control lang="nl" key="IDM_VOLUME_PROPERTIES">Volume eigenschappen</control>
@@ -968,8 +968,8 @@
     <string lang="nl" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Breng uw VeraCrypt Reddingsschijf aan in het CD/DVD station en klik op OK om deze te controleren.</string>
     <string lang="nl" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">De VeraCrypt Reddingsschijf is succesvol gecontroleerd.</string>
     <string lang="nl" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Kan niet controleren of de Reddingsschijf foutloos is gebrand.\n\nIndien u de Reddingsschijf heeft gebrand, haal de CD/DVD uit het station en breng hem opnieuw aan; daarna opnieuw controleren. Indien dit niet helpt, probeert u a.u.b. een ander brandprogramma en/of andere CD/DVD.\n\nIndien u probeerde een VeraCrypt Reddingsschijf te controleren die is aangemaakt voor een andere Hoofdsleutel, wachtwoord, salt, etc., merk dan op dat een dergelijke Reddingsschijf altijd zal falen in deze controle. Om een nieuwe reddingsschijf aan te maken die volledig compatibel is met uw huidige configuratie, selecteer 'Systeem' &gt; 'Maak Reddingsschijf Aan'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="nl" key="ERROR_CREATING_RESCUE_DISK">Fout bij het aanmaken van de VeraCrypt Reddingsschijf.</string>
     <string lang="nl" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Reddingsschijf kan niet gemaakt worden als een verborgen besturingssysteem draait.\n\nOm een Reddingsschijf te maken, start op van het lokvogel operating syteem en selecteer 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="nl" key="TIME">Tijd</string>
     <string lang="nl" key="ITERATIONS">Iteraties</string>
     <string lang="nl" key="PRE-BOOT">Pre-boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.nn.xml

@@ -261,7 +261,7 @@
     <control lang="nn" key="IDM_UNMOUNTALL">Avmonter Alle Monterte Volum</control>
     <control lang="nn" key="IDM_UNMOUNT_VOLUME">Avmonter Volum</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="nn" key="IDM_VERSION_HISTORY">Versjons Historie</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="nn" key="IDM_VOLUME_PROPERTIES">Volum Eigenskapar</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.pl.xml

@@ -261,7 +261,7 @@
     <control lang="pl" key="IDM_UNMOUNTALL">Odłącz wszystkie podłączone wolumeny</control>
     <control lang="pl" key="IDM_UNMOUNT_VOLUME">Odłącz wolumen</control>
     <control lang="pl" key="IDM_VERIFY_RESCUE_DISK">Sprawdź płytę ratunkową</control>
-    <control lang="pl" key="IDM_VERIFY_RESCUE_DISK_ISO">Sprawdź obraz ISO płyty ratunkowej</control>
+    <control lang="pl" key="IDM_VERIFY_RESCUE_DISK_ISO">Sprawdź obraz płyty ratunkowej</control>
     <control lang="pl" key="IDM_VERSION_HISTORY">Historia wersji</control>
     <control lang="pl" key="IDM_VOLUME_EXPANDER">Rozszerzacz wolumenu</control>
     <control lang="pl" key="IDM_VOLUME_PROPERTIES">Właściwości wolumenu</control>
@@ -965,11 +965,11 @@
     <string lang="pl" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Po kliknięciu przycisku OK należy wybrać nazwę pliku dla nowego obrazu ISO płyty ratunkowej programu VeraCrypt i miejsce, w którym zostanie zapisany.</string>
     <string lang="pl" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Obraz płyty ratunkowej został stworzony i zapisany w pliku: %s\n\nTeraz musisz nagrać obraz płyty ratunkowej na CD lub DVD.\n\nWAŻNE: Pamiętaj, że plik musi być nagrany na CD/DVD jako obraz płyty ISO (nie jako pojedynczy plik). Informacje jak to zrobić znajdziesz w dokumentacji twojego oprogramowania nagrywarki CD/DVD.\n\nPo nagraniu płyty ratunkowej, wybierz 'System' &gt; 'Sprawdź płytę ratunkową', aby sprawdzić poprawność nagrania płyty.</string>
     <string lang="pl" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Obraz płyty ratunkowej został stworzony i zapisany w pliku: %s\n\nTeraz musisz nagrać obraz płyty ratunkowej na CD lub DVD.\n\nCzy chcesz teraz załadować Microsoft Windows Disc Image Burner?\n\nPamiętaj: Po nagraniu płyty ratunkowej, wybierz 'System' &gt; 'Sprawdź płytę ratunkową', aby sprawdzić poprawność nagrania płyty.</string>
-    <string lang="pl" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Włóż płytę ratunkową programu VeraCrypt do napędu CD/DVD i kliknij przycisk OK w celu jego sprawdzenia.</string>
+    <string lang="pl" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Włóż płytę ratunkową programu VeraCrypt i kliknij przycisk OK w celu jego sprawdzenia.</string>
     <string lang="pl" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Płyta ratunkowa programu VeraCrypt została pomyślnie sprawdzona.</string>
     <string lang="pl" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Nie można zweryfikować poprawności zapisania płyty ratunkowej.\n\nJeśli płyta ratunkowa została zapisana, wyjmij i ponownie włóż płytę CD/DVD, a następnie ponów próbę. Jeśli to nie pomoże, należy spróbować użyć innego oprogramowania CD/DVD lub nośnika.\n\nPróba zweryfikowania płyty ratunkowej utworzonej dla innego klucza nadrzędnego, hasła, itp. nigdy nie zakończy się pozytywnie. Aby utworzyć nową płytę ratunkową w pełni kompatybilną z aktualną konfiguracją, wybierz opcję 'System' &gt; 'Utwórz płytę ratunkową'.</string>
-    <string lang="pl" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">Obraz ISO płyty ratunkowej VeraCrypt został pomyślnie sprawdzony.</string>
+    <string lang="pl" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">Obraz płyty ratunkowej VeraCrypt został pomyślnie sprawdzony.</string>
-    <string lang="pl" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">Nieudane sprawdzenie obrazu ISO płyty ratunkowej.\n\nJeżeli próbujesz sprawdzić obraz ISO płyty ratunkowej VeraCrypt stworzony dla innego klucza głównego, hasła, soli itp., proszę zauważyć, że taki obraz ISO płyty ratunkowej zawsze nie przejdzie weryfikacji. Aby stworzyć nowy obraz ISO płyty ratunkowej VeraCrypt w pełni kompatybilny z twoją obecną konfiguracją, wybierz 'System' > 'Utwórz płytę ratunkową'.</string>
+    <string lang="pl" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">Nieudane sprawdzenie obrazu płyty ratunkowej.\n\nJeżeli próbujesz sprawdzić obraz płyty ratunkowej VeraCrypt stworzony dla innego klucza głównego, hasła, soli itp., proszę zauważyć, że taki obraz płyty ratunkowej zawsze nie przejdzie weryfikacji. Aby stworzyć nowy obraz płyty ratunkowej VeraCrypt w pełni kompatybilny z twoją obecną konfiguracją, wybierz 'System' > 'Utwórz płytę ratunkową'.</string>
     <string lang="pl" key="ERROR_CREATING_RESCUE_DISK">Błąd tworzenia płyty ratunkowej</string>
     <string lang="pl" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Płyta ratunkowa VeraCrypt nie może zostać stworzona podczas uruchomionego ukrytego systemu operacyjnego.\n\nAby stworzyć płytę ratunkową VeraCrypt, zrestartuj system operacyjny i wybierz 'System' &gt; 'Tworzenie płyty ratunkowej'.</string>
     <string lang="pl" key="RESCUE_DISK_CHECK_FAILED">Nie można zweryfikować poprawności zapisu płyty ratunkowej.\n\nJeżeli masz nagraną płytę ratunkową, proszę wyjąć ją i włożyć ponownie do CD/DVD; kliknij Dalej, aby spróbować jeszcze raz. Jeżeli to nie pomoże, proszę spróbować z innym nośnikiem %s.\n\nJeżeli nie nagrałeś jeszcze płyty ratunkowej, zrób to, i kliknij Dalej.\n\nJeżeli przystąpisz do sprawdzenia płyty ratunkowej VeraCrypt przed uruchomieniem tego kreatora, proszę pamiętać że płyta ratunkowa nie może byc użyta, ponieważ została stworzona z innym kluczem głównym. Powinieneś nagrać nowo wygenerowaną płytę ratunkową.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.pt-br.xml

@@ -261,7 +261,7 @@
     <control lang="pt-br" key="IDM_UNMOUNTALL">Desmontar Todos os Volumes Montados</control>
     <control lang="pt-br" key="IDM_UNMOUNT_VOLUME">Desmontar Volume</control>
     <control lang="pt-br" key="IDM_VERIFY_RESCUE_DISK">Verificar Disco de Emergência</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="pt-br" key="IDM_VERSION_HISTORY">Histórico de Versões</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="pt-br" key="IDM_VOLUME_PROPERTIES">Propriedades do Volume</control>
@@ -965,11 +965,11 @@
     <string lang="pt-br" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Depois de clicar em OK, você irá selecionar um nome para o arquivo da imagem ISO do novo Disco de Emergência VeraCrypt e o local onde você deseja salvá-lo.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="pt-br" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Insira seu Disco de Emergência VeraCrypt no drive de CD/DVD e clique em OK para verificá-lo.</string>
+    <string lang="pt-br" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Insira seu Disco de Emergência VeraCrypt e clique em OK para verificá-lo.</string>
     <string lang="pt-br" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">O Disco de Emergência VeraCrypt foi verificado com sucesso.</string>
     <string lang="pt-br" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Não foi possível verificar se o Disco de Emergência foi gravado corretamente.\n\nSe você ja gravou o Disco de Emergência, remova o CD/DVD, coloque-o novamente e tente novamente. Se isto não andiantar, tente utilisar outro programa para gravar o CD/DVD ou outro CD/DVD.\n\nSe você tentou verificar um Disco de Emergência VeraCrypt criado para uma chave mestra, senha, salt, etc. diferente, lembre que esse Disco de Emergência will vai sempre causar erro nesta verificação. Para criar um novo Disco de Emergência compatível com esta configuração, clique em 'Sistema' &gt; 'Criar Disco de Emergência'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="pt-br" key="ERROR_CREATING_RESCUE_DISK">Erro ao criar o Disco de Emergência VeraCrypt.</string>
     <string lang="pt-br" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">O Disco de Emergência VeraCrypt não pode ser criado quando um sistema operacional oculto está sendo executado.\n\nPara criar um Disco de Emergência VeraCrypt, inicialize o sistema operacional isca e então selecione 'Sistema' &gt; 'Criar Disco de Emergência'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.ru.xml

@@ -261,7 +261,7 @@
     <control lang="ru" key="IDM_UNMOUNTALL">Размонтировать все смонтированные тома</control>
     <control lang="ru" key="IDM_UNMOUNT_VOLUME">Размонтировать том</control>
     <control lang="ru" key="IDM_VERIFY_RESCUE_DISK">Проверить диск восстановления</control>
-    <control lang="ru" key="IDM_VERIFY_RESCUE_DISK_ISO">Проверить ISO-образ диска восстановления</control>
+    <control lang="ru" key="IDM_VERIFY_RESCUE_DISK_ISO">Проверить образ диска восстановления</control>
     <control lang="ru" key="IDM_VERSION_HISTORY">История версий</control>
     <control lang="ru" key="IDM_VOLUME_EXPANDER">Расширитель томов</control>
     <control lang="ru" key="IDM_VOLUME_PROPERTIES">Свойства тома</control>
@@ -962,10 +962,10 @@
     <string lang="ru" key="VOLUME_HAS_NO_BACKUP_HEADER">В этом томе нет встроенной копии заголовка (учтите, что встроенные копии заголовков содержат только тома, созданные VeraCrypt 6.0 или новее).</string>
     <string lang="ru" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Вы пытаетесь создать резервную копию заголовка системного раздела/диска. Это не разрешено. Операции резервного копирования/восстановления, относящиеся к системному разделу/диску, можно выполнять только с помощью диска восстановления VeraCrypt (Rescue Disk).\n\nСоздать диск восстановления VeraCrypt?</string>
     <string lang="ru" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Вы пытаетесь восстановить из резервной копии заголовок виртуального тома VeraCrypt, но выбрали системный раздел/диск. Это не разрешено. Операции резервного копирования/восстановления, относящиеся к системному разделу/диску, можно выполнять только с помощью диска восстановления VeraCrypt (Rescue Disk).\n\nСоздать диск восстановления VeraCrypt?</string>
-    <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">После нажатия OK выберите имя файла для ISO-образа нового диска восстановления VeraCrypt (Rescue Disk) и место, где его нужно сохранить.</string>
+    <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">После нажатия OK выберите имя файла для образа нового диска восстановления VeraCrypt (Rescue Disk) и место, где его нужно сохранить.</string>
     <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Образ диска восстановления создан и сохранён в файле: %s\n\nСейчас вам нужно записать этот образ на CD или DVD.\n\nВАЖНО: Этот файл-образ должен быть записан на CD/DVD как ISO-образ диска (а не как отдельный файл). Сведения об этом вы можете найти в документации к своему ПО для записи CD/DVD.\n\nЗаписав диск восстановления на CD/DVD, выберите 'Система' &gt; 'Проверить диск восстановления', чтобы убедиться в корректности записи созданного диска.</string>
     <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Образ диска восстановления создан и сохранён в файле: %s\n\nСейчас вам нужно записать этот образ на CD или DVD.\n\nЗапустить программу записи оптических дисков Windows?\n\nЗаписав диск восстановления на CD/DVD, выберите 'Система' &gt; 'Проверить диск восстановления', чтобы убедиться в корректности записи созданного диска.</string>
-    <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Чтобы проверить диск восстановления VeraCrypt, вставьте его в CD/DVD-накопитель и нажмите OK.</string>
+    <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Чтобы проверить диск восстановления VeraCrypt, вставьте его в и нажмите OK.</string>
     <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Диск восстановления VeraCrypt проверен. Всё в порядке.</string>
     <string lang="ru" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Невозможно проверить правильность записи диска восстановления.\n\nЕсли вы записали диск восстановления, выньте CD/DVD из накопителя и вставьте снова; затем нажмите 'Далее', чтобы повторить попытку. Если это не поможет, попробуйте воспользоваться другим ПО для записи CD/DVD и/или другим CD/DVD.\n\nЕсли вы пытались проверить диск восстановления VeraCrypt, созданный с другим мастер-ключом, паролем, солью и т.д., знайте, что такой диск восстановления не пройдёт эту проверку никогда. Чтобы создать новый диск восстановления, полностью совместимый с текущей конфигурацией, выберите меню 'Система' &gt; 'Создать диск восстановления'.</string>
     <string lang="ru" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">ISO-образ диска восстановления VeraCrypt прошёл проверку успешно.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.sk.xml

@@ -261,7 +261,7 @@
     <control lang="sk" key="IDM_UNMOUNTALL">Odpojiť všetky pripojené zväzky</control>
     <control lang="sk" key="IDM_UNMOUNT_VOLUME">Odpojiť zväzok</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="sk" key="IDM_VERSION_HISTORY">História verzií</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="sk" key="IDM_VOLUME_PROPERTIES">Vlastnosti zväzku</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.sl.xml

@@ -261,7 +261,7 @@
     <control lang="sl" key="IDM_UNMOUNTALL">Odklopi vse priklopljene zbirnike</control>
     <control lang="sl" key="IDM_UNMOUNT_VOLUME">Odklopi zbirnik</control>
     <control lang="sl" key="IDM_VERIFY_RESCUE_DISK">Preveri rešilni disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="sl" key="IDM_VERSION_HISTORY">Zgodovina različic</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="sl" key="IDM_VOLUME_PROPERTIES">Lastnosti zbirnika</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.sv.xml

@@ -261,7 +261,7 @@
     <control lang="sv" key="IDM_UNMOUNTALL">Demontera alla monterade volymer</control>
     <control lang="sv" key="IDM_UNMOUNT_VOLUME">Demontera volym</control>
     <control lang="sv" key="IDM_VERIFY_RESCUE_DISK">Verifiera återställningsskiva</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="sv" key="IDM_VERSION_HISTORY">Versionshistorik</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="sv" key="IDM_VOLUME_PROPERTIES">Volymegenskaper</control>
@@ -968,8 +968,8 @@
     <string lang="sv" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Sätt in återställningsskivan i din CD- eller DVD-enhet och klicka på OK för att verifiera den.</string>
     <string lang="sv" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Återställningsskivan har verifierats utan att några fel hittades.</string>
     <string lang="sv" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Det går inte att säkerställa att bränningen av återställningsskivan utförts utan fel.\n\nOm du har bränt återställningsskivan, mata ut och sätt in CD:n eller DVD:n igen och försök en gång till. Använd sedan en annan bränningsprogramvara och/eller andra medier.\n\nVerifiering av en återställningsskiva skapad för en annan primär nyckel, annat lösenord eller annat salt kommer alltid att misslyckas. Välj ”Skapa återställningsskiva” under ”System” i rullgardinsmenyn för att skapa en ny återställningsskiva som är helt kompatibel med din aktuella konfiguration.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="sv" key="ERROR_CREATING_RESCUE_DISK">Fel vid skapandet av en återställningsskiva.</string>
     <string lang="sv" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Det går inte att skapa en återställningsskiva medan ett dolt operativsystem körs.\n\nFör att skapa en återställningsskiva, starta skenoperativsystemet och välj sedan ”Skapa återställningsskiva” under ”System” i rullgardinsmenyn.</string>
     <string lang="sv" key="RESCUE_DISK_CHECK_FAILED">Det går inte att säkerställa att bränningen av återställningsskivan utförts utan fel.\n\nOm du har bränt återställningsskivan, mata ut och sätt in CD:n eller DVD:n igen och klicka på Nästa för att försöka en gång till. Använd andra medier om detta inte hjälper%s.\n\nBränn återställningsskivan, om du inte gjort det än, och klicka på Nästa.\n\nAtt verifiera en återställningsskiva som skapats innan du körde denna guide fungerar inte, eftersom den skapades för en annan primär nyckel. Du måste bränna den nyligen genererade återställningsskivan.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.tr.xml

@@ -261,7 +261,7 @@
     <control lang="tr" key="IDM_UNMOUNTALL">Bağlı Olan Birimlerin Bağlantısını Kes</control>
     <control lang="tr" key="IDM_UNMOUNT_VOLUME">Birimin Bağlantısını Kes</control>
     <control lang="en" key="IDM_VERIFY_RESCUE_DISK">Verify Rescue Disk</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="tr" key="IDM_VERSION_HISTORY">Sürüm Geçmişi</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="tr" key="IDM_VOLUME_PROPERTIES">Birim Özellikleri</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="en" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
     <string lang="en" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk ISO image and the location where you wish to place it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
-    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk into your CD/DVD drive and click OK to verify it.</string>
+    <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' &gt; 'Create Rescue Disk'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="en" key="ERROR_CREATING_RESCUE_DISK">Error creating VeraCrypt Rescue Disk.</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.uk.xml

@@ -261,7 +261,7 @@
     <control lang="uk" key="IDM_UNMOUNTALL">Розмонтувати всі змонтовані томи</control>
     <control lang="uk" key="IDM_UNMOUNT_VOLUME">Розмонтувати том</control>
     <control lang="uk" key="IDM_VERIFY_RESCUE_DISK">Провірити диск відновленння</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="uk" key="IDM_VERSION_HISTORY">Історія версії</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="uk" key="IDM_VOLUME_PROPERTIES">Властивості тома</control>
@@ -962,14 +962,14 @@
     <string lang="uk" key="VOLUME_HAS_NO_BACKUP_HEADER">В цьому томі немає вмонтованої копії заголовку (вмонтовані копії заголовків містять тільки томи, створені VeraCrypt 6.0 або новіша).</string>
     <string lang="uk" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Ви намагаєтесь зробити резервну копію заголовку системного розділу/пристрою. Це не дозволено. Резервні/відновлювальні операції з системним розділом/пристроєм можуть бути здійснені лише за допомогою Диску Відновлення VeraCrypt.\n\nВи бажаєте створити Диск Відновлення VeraCrypt?</string>
     <string lang="uk" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Ви намагаєтесь відновити заголовок віртуального тому VeraCrypt, але ви обрали системний розділ/пристрій. Це не дозволено. Резервні/відновлювальні операції з системним розділом/пристроєм можуть бути здійснені лише за допомогою Диску Відновлення VeraCrypt.\n\nВи бажаєте створити Диск Відновлення VeraCrypt?</string>
-    <string lang="uk" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Після натискання 'Добре', вам потрібно обрати ім'я файлу для ISO-образу нового Диску Відновлення VeraCrypt та шляху його розміщення.</string>
+    <string lang="uk" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Після натискання 'Добре', вам потрібно обрати ім'я файлу для образу нового Диску Відновлення VeraCrypt та шляху його розміщення.</string>
     <string lang="uk" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Образ Диску Відновлення створено та збережено у файлі: %s\n\nЗараз вам потрібно записати Диск Відновлення на CD або DVD.\n\nВАЖЛИВО: пам'ятайте, що файл потрібно записати на CD/DVD як ISO-образ (а не як окремий файл). Більш докладніше про те, як це зробити, наведено у документації вашого CD/DVD-записувального програмного забезпечення.\n\nПісля запису Диску Відновлення, оберіть 'Система' &gt; 'Перевірити Диск Відновлення', щоб перевірити чи коректно записано Диск Відновлення.</string>
     <string lang="uk" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Образ диска відновлення створений і збережений у файлі:%s\n\nЗараз вам потрібно записати цей образ на CD або DVD.\n\nБажаєте запустити програму запису оптичних дисків Windows?\n\nЗаписавши диск відновлення на CD/DVD, виберіть 'Система' &gt; 'Перевірити диск відновлення', щоб переконатися в коректності запису створеного диска.</string>
     <string lang="uk" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Будь ласка, вставте Диск Відновлення VeraCrypt у CD/DVD-пристрій та натисніть 'Добре' для перевірки.</string>
     <string lang="uk" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Диск Відновлення VeraCrypt успішно перевірено.</string>
     <string lang="uk" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Неможливо перевірити чи коректно записано Диск Відновлення.\n\nЯкщо у вас є записаний Диск Відновлення, будь ласка, дістаньте, вставте CD/DVD; потім спробуйте ще. Якщо це не допоможе, будь ласка спробуйте іншу CD/DVD-записувальну програму та/або носій.\n\nЯкщо ви захочете перевірити Диск Відновлення VeraCrypt, створений з іншим головний ключем, паролем, "сіллю" тощо, будь ласка пам'ятайте, що перевірка такого Диску Відновлення завжди буде невдалою. Щоб створити новий Диск Відновлення повністю сумісний з вашою поточною конфігурацією, оберіть 'Система' &gt; 'Створити Диск Відновлення'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="uk" key="ERROR_CREATING_RESCUE_DISK">Помилка створення Диску Відновлення VeraCrypt.</string>
     <string lang="uk" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Диск відновлення VeraCrypt неможна створити при запущеній прихованій операційній системі.\n\nЩоб створити диск відновлення, завантажте підставну операційну систему, а потім виберіть 'Система' &gt; 'Створити диск відновлення'.</string>
     <string lang="uk" key="RESCUE_DISK_CHECK_FAILED">Неможливо перевірити чи коректно записано Диск Відновлення.\n\nЯкщо у вас є записаний Диск Відновлення, будь ласка, вставте в CD/DVD; потім натисніть 'Далі' для наступної спроби. Якщо це не допоможе, будь ласка спробуйте іншу CD/DVD-записувальну програму та/або носій.%s\n\nЯкщо у вас ще немає записаного Диску Відновлення, будь ласка, запишіть його та потім натисніть 'Далі'.\n\nЯкщо ви захочете перевірити Диск Відновлення VeraCrypt, створений перед запуском цього майстра, будь ласка памятайте, що такий Диск Відновлення не можна використовувати, тому що він створений з іншим головним ключем. Вам потрібно записати заново створений Диск Відновлення.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.uz.xml

@@ -261,7 +261,7 @@
     <control lang="uz" key="IDM_UNMOUNTALL">Размонтировать все смонтированные тома</control>
     <control lang="uz" key="IDM_UNMOUNT_VOLUME">Размонтировать том</control>
     <control lang="uz" key="IDM_VERIFY_RESCUE_DISK">Проверить диск восстановления</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="uz" key="IDM_VERSION_HISTORY">История версий</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="uz" key="IDM_VOLUME_PROPERTIES">Свойства тома</control>
@@ -962,14 +962,14 @@
     <string lang="uz" key="VOLUME_HAS_NO_BACKUP_HEADER">В этом томе нет встроенной копии заголовка (учтите, что встроенные копии заголовков содержат только тома, созданные VeraCrypt 6.0 или новее).</string>
     <string lang="uz" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Вы пытаетесь сделать резервную копию заголовка системного раздела/диска. Это не разрешено. Операции резервного копирования/восстановления, относящиеся к системному разделу/диску, можно выполнять только с помощью диска восстановления VeraCrypt (Rescue Disk).\n\nСоздать диск восстановления VeraCrypt?</string>
     <string lang="uz" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Вы пытаетесь восстановить из резервной копии заголовок виртуального тома VeraCrypt, но выбрали системный раздел/диск. Это не разрешено. Операции резервного копирования/восстановления, относящиеся к системному разделу/диску, можно выполнять только с помощью диска восстановления VeraCrypt (Rescue Disk).\n\nСоздать диск восстановления VeraCrypt?</string>
-    <string lang="uz" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">После нажатия OK выберите имя файла для ISO-образа нового диска восстановления VeraCrypt (Rescue Disk) и место, где его нужно сохранить.</string>
+    <string lang="uz" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">После нажатия OK выберите имя файла для образа нового диска восстановления VeraCrypt (Rescue Disk) и место, где его нужно сохранить.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="uz" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Чтобы проверить диск восстановления VeraCrypt, вставьте его в CD/DVD-накопитель и нажмите OK.</string>
     <string lang="uz" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Диск восстановления VeraCrypt успешно прошёл проверку.</string>
     <string lang="uz" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Невозможно проверить правильность записи диска восстановления.\n\nЕсли вы записали диск восстановления, выньте CD/DVD из накопителя и вставьте снова; затем нажмите 'Далее', чтобы повторить попытку. Если это не поможет, попробуйте воспользоваться другим ПО для записи CD/DVD и/или другим CD/DVD.\n\nЕсли вы пытались проверить диск восстановления VeraCrypt, созданный с другим мастер-ключом, паролем, 'солью' и т.д., знайте, что такой диск восстановления не пройдёт эту проверку никогда. Чтобы создать новый диск восстановления, полностью совместимый с текущей конфигурацией, выберите меню 'Система' &gt; 'Создать диск восстановления'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="uz" key="ERROR_CREATING_RESCUE_DISK">Ошибка создания диска аварийного восстановления VeraCrypt.</string>
     <string lang="uz" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Диск восстановления VeraCrypt нельзя создавать при запущенной скрытой операционной системе.\n\nЧтобы создать диск восстановления, загрузите обманную операционную систему, а затем выберите 'Система' &gt; 'Создать диск восстановления'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.vi.xml

@@ -261,7 +261,7 @@
     <control lang="vi" key="IDM_UNMOUNTALL">Tháo Tất cả các Tập đĩa xuống</control>
     <control lang="vi" key="IDM_UNMOUNT_VOLUME">Tháo Tập đĩa xuống</control>
     <control lang="vi" key="IDM_VERIFY_RESCUE_DISK">Kiểm tra Đĩa Cứu hộ</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="vi" key="IDM_VERSION_HISTORY">Lịch sử phiên bản</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="vi" key="IDM_VOLUME_PROPERTIES">Đặc tính của Tập đĩa</control>
@@ -962,14 +962,14 @@
     <string lang="vi" key="VOLUME_HAS_NO_BACKUP_HEADER">Không có bản sao phần đầu được gắn trong tập đĩa này (lưu ý là chỉ có các tập đĩa được cấu tạo bởi VeraCrypt 6.0 hay sau này có chứa những bản sao phần đầu được gắn vào).</string>
     <string lang="vi" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">Bạn đang thử sao lại phần đầu của phân vùng/ổ đĩa hệ thống. Chuyện này không được cho phép. Sao lại/hồi phục những thao tác liên quan đến phân vùng/ổ đĩa hệ thống chỉ có thể thực hiện bằng cách dùng Đĩa Cứu hộ VeraCrypt.\n\nBạn có muốn cấu tạo một Đĩa Cứu hộ VeraCrypt không?</string>
     <string lang="vi" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">Bạn đang thử hồi phục phần đầu của một tập đĩa VeraCrypt ảo nhưng bạn đã chọn phân vùng/ổ đĩa hệ thống. Chuyện này không được cho phép. Sao lại/hồi phục những thao tác liên quan đến phân vùng/ổ đĩa hệ thống chỉ có thể thực hiện bằng cách dùng Đĩa Cứu hộ VeraCrypt.\n\nBạn có muốn cấu tạo một Đĩa Cứu hộ VeraCrypt không?</string>
-    <string lang="vi" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Sau khi bạn nhấn OK, bạn sẽ chọn tên một tập tin cho bản ảnh ISO của Đĩa Cứu hộ VeraCrypt và vị trí bạn muốn để nó.</string>
+    <string lang="vi" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">Sau khi bạn nhấn OK, bạn sẽ chọn tên một tập tin cho bản ảnh của Đĩa Cứu hộ VeraCrypt và vị trí bạn muốn để nó.</string>
     <string lang="vi" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">Bản ảnh của Đĩa Cứu hộ đã được cấu tạo và lưu trữ trong tập tin này:\n%s\n\nBây giờ bạn cần sang bản ảnh của Đĩa Cứu hộ qua một CD hay DVD.\n\nQUAN TRỌNG: Lưu ý là tập tin phải được viết vào CD/DVD như là một bản ảnh ISO của đĩa (chứ không phải như là một tập tin cá nhân). Để có hướng dẫn làm như thế nào, xin tham khảo tài liệu của nhu liệu thâu CD/DVD của bạn.\n\nSau khi bạn sang Đĩa Cứu hộ, chọn 'Hệ thống' &gt; 'Xác nhận Đĩa Cứu hộ' để xác nhận là nó đã được sang đúng cách.</string>
     <string lang="vi" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">Bản ảnh của Đĩa Cứu hộ đã được cấu tạo và lưu trữ trong tập tin này:\n%s\n\nBây giờ bạn cần sang bản ảnh của Đĩa Cứu hộ qua một CD hay DVD.\n\nBạn có muốn khởi chạy Microsoft Windows Disc Image Burner bây giờ không?\n\nLưu ý: Sau khi bạn sang Đĩa Cứu hộ, chọn 'Hệ thống' &gt; 'Xác nhận Đĩa Cứu hộ' để xác nhận là nó đã được sang đúng cách.</string>
     <string lang="vi" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Xin chèn Đĩa Cứu hộ VeraCrypt của bạn vào ổ đĩa CD/DVD của bạn và nhấn OK để xác nhận nó.</string>
     <string lang="vi" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">Đĩa Cứu hộ VeraCrypt đã được xác nhận thành công.</string>
     <string lang="vi" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Không thể xác nhận là Đĩa Cứu hộ đã được sang đúng cách.\n\nNếu bạn đã sang Đĩa Cứu hộ, xin đẩy CD/DVD ra và chèn vào lại; sau đó thử lại. Nếu việc này không giúp được, xin thử nhu liệu thâu CD/DVD và/hay môi trường khác.\n\nNếu bạn thử xác nhận một Đĩa Cứu hộ VeraCrypt được cấu tạo cho một khóa chính, mật mã, salt, v.v. khác, xin lưu ý là Đĩa Cứu hộ như thế sẽ luôn luôn thất bại sự xác nhận này. Để cấu tạo một Đĩa Cứu hộ mới hoàn toàn tương đương với cấu hình hiện tại của bạn, chọn 'Hệ thống' &gt; 'Cấu tạo Đĩa Cứu hộ'.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="vi" key="ERROR_CREATING_RESCUE_DISK">Lỗi cấu tạo Đĩa Cứu hộ VeraCrypt.</string>
     <string lang="vi" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">Đĩa Cứu hộ VeraCrypt không thể được cấu tạo khi một hệ điều hành ẩn đang chạy.\n\nĐể cấu tạo một Đĩa Cứu hộ VeraCrypt, khởi động hệ điều hành nghi trang và sau đó chọn 'Hệ thống' &gt; 'Cấu tạo Đĩa Cứu hộ'.</string>
     <string lang="vi" key="RESCUE_DISK_CHECK_FAILED">Không thể xác nhận là Đĩa Cứu hộ đã được sang đúng cách.\n\nNếu bạn đã sang Đĩa Cứu hộ, xin đẩy CD/DVD ra và chèn vào lại; sau đó nhấn Kế tiếp để thử lại. Nếu việc này không giúp được, xin thử môi trường khác%s.\n\nNếu bạn chưa sang Đĩa Cứu hộ, xin làm thế, và sau đó nhấn Kế tiếp.\n\nNếu bạn thử xác nhận một Đĩa Cứu hộ VeraCrypt được cấu tạo trước khi bạn bắt đầu trợ lý này thì xin lưu ý là Đĩa Cứu hộ như thế không thể dùng được bởi vì nó được cấu tạo cho  một khóa chính  khác. Bạn cần sang Đĩa Cứu hộ mới được tạo ra.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.zh-cn.xml

@@ -261,7 +261,7 @@
     <control lang="zh-cn" key="IDM_UNMOUNTALL">卸载全部加载的加密卷</control>
     <control lang="zh-cn" key="IDM_UNMOUNT_VOLUME">卸载所选加密卷</control>
     <control lang="zh-cn" key="IDM_VERIFY_RESCUE_DISK">验证应急盘</control>
-    <control lang="zh-cn" key="IDM_VERIFY_RESCUE_DISK_ISO">验证应急盘ISO镜像</control>
+    <control lang="zh-cn" key="IDM_VERIFY_RESCUE_DISK_ISO">验证应急盘镜像</control>
     <control lang="zh-cn" key="IDM_VERSION_HISTORY">版本历史（联网）</control>
     <control lang="zh-cn" key="IDM_VOLUME_EXPANDER">加密卷扩展向导</control>
     <control lang="zh-cn" key="IDM_VOLUME_PROPERTIES">加密卷属性</control>
@@ -962,14 +962,14 @@
     <string lang="zh-cn" key="VOLUME_HAS_NO_BACKUP_HEADER">加密卷中没有内嵌的备份头信息（注意，仅在 VeraCrypt 6.0 和以后的版本才包含内嵌的头信息）。</string>
     <string lang="zh-cn" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">您正在尝试备份系统分区/设备的头信息，该功能不被允许。对于系统分区/设备头信息的备份/恢复 只能通过使用 VeraCrypt 应急盘来进行。\n\n您希望创建 VeraCrypt 应急盘吗？</string>
     <string lang="zh-cn" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">您正在尝试恢复系统分区/设备的头信息，但是您选择的是系统分区/设备。该功能不被允许。 对于系统分区/设备头信息的备份/恢复 只能通过使用 VeraCrypt 应急盘来进行。\n\n您希望创建 VeraCrypt 应急盘吗？</string>
-    <string lang="zh-cn" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">在点击〖确定〗按钮后，您将会设置新的 VeraCrypt 应急盘  ISO 镜像文件的名称和存放位置。</string>
+    <string lang="zh-cn" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">在点击〖确定〗按钮后，您将会设置新的 VeraCrypt 应急盘  镜像文件的名称和存放位置。</string>
     <string lang="zh-cn" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">应急盘  ISO 镜像文件已经创建并存储为文件： %s\n\n现在您需要把应急盘刻录到 CD 或 DVD。\n\n重要：文件必须以 ISO 镜像文件方式刻录到 CD/DVD（不要刻录为单个的数据文件）。要获取更多的关于如何刻录 ISO 文件的信息，请参考您的 CD/DVD 刻录软件的说明书。\n\n请您在刻录应急盘之后，选择〖系统〗 -&gt; 〖验证应急盘〗来验证应急盘是否已经成功刻录。</string>
     <string lang="zh-cn" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">应急盘  ISO 镜像文件已经创建并存储为文件： %s\n\n现在您需要把应急盘刻录到 CD 或 DVD。\n\n您想要启动 Windows 自带的磁盘镜像刻录功能吗？\n\n注意，请您在刻录应急盘之后，选择〖系统〗 -&gt; 〖验证应急盘〗来验证应急盘是否已经成功刻录。</string>
     <string lang="zh-cn" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">请插入 VeraCrypt 应急盘到 CD/DVD 光驱并点〖确定〗按钮开始验证。</string>
     <string lang="zh-cn" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt 应急盘已经被成功验证。</string>
     <string lang="zh-cn" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">应急盘验证失败。\n\n如果您已经刻录了应急盘，请弹出后重新插入应急盘到 CD/DVD，之后再试一次。如果仍然无效，请尝试使用其它 CD/DVD 刻录软件或刻录盘。\n\n如果您尝试验证一个为不同的主密钥、密码、元素等创建的 VeraCrypt 应急盘，请注意这样的应急盘会无法通过验证。要创建一个新的和当前配置完全兼容的应急盘，请选择〖系统〗 -&gt; 〖创建应急盘〗。</string>
-    <string lang="zh-cn" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">VeraCrypt 应急盘ISO镜像已经被成功验证。</string>
+    <string lang="zh-cn" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">VeraCrypt 应急盘 镜像已经被成功验证。</string>
-    <string lang="zh-cn" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">应急盘ISO镜像文件验证失败。\n\n请注意，如果你尝试验证一个与当前系统盘主密钥、密码或盐值等不同的情况下创建的应急盘，此操作将提示失败。要创建一个与当前配置相符的应急盘ISO镜像，请选择 "系统" > "创建应急盘" 。</string>
+    <string lang="zh-cn" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">应急盘 镜像文件验证失败。\n\n请注意，如果你尝试验证一个与当前系统盘主密钥、密码或盐值等不同的情况下创建的应急盘，此操作将提示失败。要创建一个与当前配置相符的应急盘镜像，请选择 "系统" > "创建应急盘" 。</string>
     <string lang="zh-cn" key="ERROR_CREATING_RESCUE_DISK">创建 VeraCrypt 应急盘时失败。</string>
     <string lang="zh-cn" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt 应急盘在隐形操作系统运行时无法创建。\n\n要创建 VeraCrypt 应急盘，请启动到迷惑操作系统之后选择〖系统〗 -&gt; 〖创建应急盘〗。</string>
     <string lang="zh-cn" key="RESCUE_DISK_CHECK_FAILED">不能确定应急盘是否刻录成功。\n\n如果您已经刻录了应急盘，请弹出后重新插入应急盘到 CD/DVD，之后再尝试验证一次。如果仍然无效，请尝试使用其它 %s 。\n\n如果您还没有创建应急盘，请首先创建一个，然后再点〖下一步〗按钮。\n\n如果您尝试验证一个运行加密盘创建向导以前创建的应急盘，则这样的应急盘是无法用于当前系统的，这是因为它是使用了不同的主密钥创建的。您需要刻录和创建一个新的应急盘。</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.zh-hk.xml

@@ -261,7 +261,7 @@
     <control lang="zh-hk" key="IDM_UNMOUNTALL">卸載全部載入的加密卷</control>
     <control lang="zh-hk" key="IDM_UNMOUNT_VOLUME">卸載所選加密卷</control>
     <control lang="zh-hk" key="IDM_VERIFY_RESCUE_DISK">驗證應急盤</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="zh-hk" key="IDM_VERSION_HISTORY">版本歷史（聯網）</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="zh-hk" key="IDM_VOLUME_PROPERTIES">加密卷屬性</control>
@@ -962,14 +962,14 @@
     <string lang="zh-hk" key="VOLUME_HAS_NO_BACKUP_HEADER">加密卷中沒有內嵌的備份頭資訊（注意，僅在 VeraCrypt 6.0 和以後的版本才包含內嵌的頭資訊）。</string>
     <string lang="zh-hk" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">您正在嘗試備份系統分區/設備的頭資訊，該功能不被允許。對於系統分區/設備頭資訊的備份/恢復 只能通過使用 VeraCrypt 應急盤來進行。\n\n您希望創建 VeraCrypt 應急盤嗎？</string>
     <string lang="zh-hk" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">您正在嘗試恢復系統分區/設備的頭資訊，但是您選擇的是系統分區/設備。該功能不被允許。 對於系統分區/設備頭資訊的備份/恢復 只能通過使用 VeraCrypt 應急盤來進行。\n\n您希望創建 VeraCrypt 應急盤嗎？</string>
-    <string lang="zh-hk" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">在點擊“確定”按鈕後，您將會設置新的 VeraCrypt 應急盤  ISO 鏡像檔的名稱和存放位置。</string>
+    <string lang="zh-hk" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">在點擊“確定”按鈕後，您將會設置新的 VeraCrypt 應急盤  鏡像檔的名稱和存放位置。</string>
     <string lang="zh-hk" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">應急盤  ISO 鏡像檔已經創建並存儲為檔： %s\n\n現在您需要把應急盤刻錄到 CD 或 DVD。\n\n重要：檔必須以 ISO 鏡像檔方式刻錄到 CD/DVD（不要刻錄為單個的資料檔案）。要獲取更多的關於如何刻錄 ISO 檔的資訊，請參考您的 CD/DVD 刻錄軟體的說明書。\n\n請您在刻錄應急盤之後，選擇 '系統' &gt; '驗證應急盤' 來驗證應急盤是否已經成功刻錄。</string>
     <string lang="zh-hk" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">應急盤  ISO 鏡像檔已經創建並存儲為檔： %s\n\n現在您需要把應急盤刻錄到 CD 或 DVD。\n\n您想要啟動 Windows 自帶的磁片鏡像刻錄功能嗎？\n\n注意，請您在刻錄應急盤之後，選擇 '系統' &gt; '驗證應急盤' 來驗證應急盤是否已經成功刻錄。</string>
     <string lang="zh-hk" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">請插入 VeraCrypt 應急盤到 CD/DVD 光碟機並點“確定”按鈕開始驗證。</string>
     <string lang="zh-hk" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt 應急盤已經被成功驗證。</string>
     <string lang="zh-hk" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">應急盤驗證失敗。\n\n如果您已經刻錄了應急盤，請彈出後重新插入應急盤到 CD/DVD，之後再試一次。如果仍然無效，請嘗試使用其他 CD/DVD 刻錄軟體或刻錄盤。\n\n如果您嘗試驗證一個為不同的主密鑰、密碼、元素等創建的 VeraCrypt 應急盤，請注意這樣的應急盤會無法通過驗證。要創建一個新的和當前配置完全相容的應急盤，請選擇 '系統' &gt; '創建應急盤'。</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="zh-hk" key="ERROR_CREATING_RESCUE_DISK">創建 VeraCrypt 應急盤時失敗。</string>
     <string lang="zh-hk" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt 應急盤在隱形作業系統運行時無法創建。\n\n要創建 VeraCrypt 應急盤，請啟動到迷惑作業系統之後選擇 '系統' &gt; '創建應急盤'。</string>
     <string lang="zh-hk" key="RESCUE_DISK_CHECK_FAILED">不能確定應急盤是否刻錄成功。\n\n如果您已經刻錄了應急盤，請彈出後重新插入應急盤到 CD/DVD，之後再嘗試驗證一次。如果仍然無效，請嘗試使用其他 %s 。\n\n如果您還沒有創建應急盤，請首先創建一個，然後再點 '下一步' 按鈕。\n\n如果您嘗試驗證一個運行加密盤創建嚮導以前創建的應急盤，則這樣的應急盤是無法用於當前系統的，這是因為它是使用了不同的主密鑰創建的。您需要刻錄和創建一個新的應急盤。</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">

Translations/Language.zh-tw.xml

@@ -261,7 +261,7 @@
     <control lang="zh-tw" key="IDM_UNMOUNTALL">卸載全部掛載的加密區</control>
     <control lang="zh-tw" key="IDM_UNMOUNT_VOLUME">卸載選擇的加密區</control>
     <control lang="zh-tw" key="IDM_VERIFY_RESCUE_DISK">驗證救援磁碟</control>
-    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk ISO Image</control>
+    <control lang="en" key="IDM_VERIFY_RESCUE_DISK_ISO">Verify Rescue Disk Image</control>
     <control lang="zh-tw" key="IDM_VERSION_HISTORY">版本歷史(線上)</control>
     <control lang="en" key="IDM_VOLUME_EXPANDER">Volume Expander</control>
     <control lang="zh-tw" key="IDM_VOLUME_PROPERTIES">加密區內容</control>
@@ -962,14 +962,14 @@
     <string lang="en" key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by VeraCrypt 6.0 or later contain embedded backup headers).</string>
     <string lang="zh-tw" key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">您正在嘗試備份系統分割區/磁碟機的標頭訊息。這是不被允許的。對於系統分割區/磁碟機標頭訊息的備份/恢復操作只能經由使用 VeraCrypt 救援磁碟來進行。\n\n您希望建立 VeraCrypt 救援磁碟嗎？</string>
     <string lang="zh-tw" key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">您正在嘗試恢復虛擬 VeraCrypt 加密區的標頭訊息但是您選擇的是系統分割區/磁碟機。這是不被允許的。 對於系統分割區/磁碟機標頭訊息的備份/恢復只能經由使用 VeraCrypt 救援磁碟來進行。\n\n您希望建立 VeraCrypt 救援磁碟嗎？</string>
-    <string lang="zh-tw" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">在點 '確定' 後，您將會選擇新的 VeraCrypt 救援磁碟 ISO 影像檔案的檔案名稱和您要存放位置。</string>
+    <string lang="zh-tw" key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">在點 '確定' 後，您將會選擇新的 VeraCrypt 救援磁碟 影像檔案的檔案名稱和您要存放位置。</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="en" key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' &gt; 'Verify Rescue Disk' to verify that it has been correctly burned.</string>
     <string lang="zh-tw" key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">請插入 VeraCrypt 救援磁碟到 CD/DVD 光碟機並點選 '確定' 開始驗證。</string>
     <string lang="zh-tw" key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">VeraCrypt 救援磁碟已經被成功驗證。</string>
     <string lang="zh-tw" key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">無法驗證救援磁碟已被正確燒錄。\n\n如果您已經燒錄了救援磁碟，請退出後重新插入 CD/DVD；然後再試一次。如果沒有用，請嘗試使用其他 CD/DVD 燒錄軟體或光碟片。\n\n如果您嘗試驗證一個為不同的主金鑰、密碼、salt 值、等建立的 VeraCrypt 救援磁碟，請注意這樣的救援磁碟永遠無法通過驗證。要建立一個新的和目前組態完全相容的救援磁碟，請選擇 "系統" &gt; "建立救援磁碟"。</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk ISO image has been successfully verified.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</string>
-    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk ISO image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk ISO image created for a different master key, password, salt, etc., please note that such Rescue Disk ISO image will always fail this verification. To create a new Rescue Disk ISO image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
+    <string lang="en" key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</string>
     <string lang="zh-tw" key="ERROR_CREATING_RESCUE_DISK">建立 VeraCrypt 救援磁碟時失敗。</string>
     <string lang="en" key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' &gt; 'Create Rescue Disk'.</string>
     <string lang="en" key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</string>
@@ -1406,6 +1406,11 @@
     <string lang="en" key="TIME">Time</string>
     <string lang="en" key="ITERATIONS">Iterations</string>
     <string lang="en" key="PRE-BOOT">Pre-Boot</string>
+    <string lang="en" key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</string>
+    <string lang="en" key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</string>
+    <string lang="en" key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</string>
   </localization>
   <!-- XML Schema -->
   <xs:schema attributeFormDefault="unqualified" elementFormDefault="qualified" xmlns:xs="http://www.w3.org/2001/XMLSchema">