<entrylang="en"key="IDT_EXTRACT_DESTINATION">Please select or type the location where you want to place the extracted files:</entry>
<entrylang="en"key="IDT_INSTALL_DESTINATION">Please select or type the location where you want to install the VeraCrypt program files. If the specified folder does not exist, it will be automatically created.</entry>
<entrylang="en"key="IDT_UNINSTALL_DIR">Click Uninstall to remove VeraCrypt from this system.</entry>
<entrylang="sl"key="IDD_VOL_CREATION_WIZARD_DLG">VeraCrypt-ov čarovnik za ustvarjanje zbirnika</entry>
<entrylang="sl"key="IDT_CLUSTER">Grozd </entry>
<entrylang="sl"key="IDT_COLLECTING_RANDOM_DATA_NOTE">POMEMBNO: Premikajte Vašo miško kolikor se da naključno znotraj tega okna. Dalj časa ko jo boste premikali, bolje bo. Slednje namreč znatno povečuje kriptografsko moč šifrirnih ključev. Nato kliknite 'Naprej' za nadaljevanje.</entry>
<entrylang="sl"key="IDT_MULTI_BOOT">Izberite to možnost, če sta dva ali več operacijskih sistemov naloženih na tem računalniku.\n\nNa primer:\n- Okna XP in Okna XP\n- Okna XP in Okna Vista\n- Okna in Mac OS X\n- Okna in Linux\n- Okna, Linux in Mac OS X</entry>
<entrylang="sl"key="IDT_NON_SYS_DEVICE">Šifrira nesistemski razdelek na kateremkoli notranjim ali zunanjim pogonom (recimo spominski pogon). Izbirno ustvari skrivni zbirnik.</entry>
<entrylang="sl"key="IDT_SINGLE_BOOT">Izberite to možnost če je na tem računalniku naložen samo eden operacijski sistem (četudi ima mnogo uporabnikov).</entry>
<entrylang="sl"key="IDT_SPEED">Hitrost</entry>
<entrylang="sl"key="IDT_STATUS">Stanje</entry>
<entrylang="sl"key="IDT_SYSENC_KEYS_GEN_INFO">Ključi, naključne vrednosti in drugi podatki so bili uspešno proizvedeni. Če želite proizvesti nove ključe, kliknite Nazaj in nato Naprej. V nasprotnem primeru kliknite Naprej za nadaljevanje.</entry>
<entrylang="sl"key="IDT_SYS_DEVICE">Šifrira razdelek/pogon kjer so naložena Okna. Kdorkoli želi pridobiti dostop ali uporabiti sistem, torej branje in pisanje datotek ipd., bo moral vsakič vnesti pravilno geslo preden se bodo Okna zagnala. Izbirno ustvari še skriti sistem.</entry>
<entrylang="en"key="IDT_SYS_PARTITION">Select this option to encrypt the partition where the currently running Windows operating system is installed.</entry>
<entrylang="en"key="IDT_VOLUME_LABEL">Volume Label in Windows:</entry>
<entrylang="en"key="IDC_DISABLE_BOOT_LOADER_OUTPUT">Do not &show any texts in the pre-boot authentication screen (except the below custom message)</entry>
<entrylang="en"key="IDC_ENABLE_HARDWARE_ENCRYPTION">Accelerate AES encryption/decryption by using the AES instructions of the processor (if available)</entry>
<entrylang="sl"key="IDT_BOX_BENCHMARK_INFO">Hitrost je odvisna od obremenitve centralne procesne enote in značilnosti naprav, ki hranijo podatke.\n\nTi testi potekajo v delovnem spominu.</entry>
<entrylang="sl"key="IDT_KEYFILE_GENERATOR_NOTE">POMEMBNO: Premikajte Vašo miško kolikor se da naključno znotraj tega okna. Dalj časa ko jo boste premikali, bolje bo. Slednje namreč znatno povečuje kriptografsko moč ključne datoteke.</entry>
<entrylang="sl"key="IDT_KEYFILE_WARNING">POZOR: Če izgubite ključno datoteko ali če se ji spremeni katerikoli bit njenih prvih 1024 kilobajtov, bo nemogoče priključiti zbirnike, ki uporabljajo to ključno datoteko!</entry>
<entrylang="sl"key="IDT_KEY_UNIT">bitov</entry>
<entrylang="en"key="IDT_NUMBER_KEYFILES">Number of keyfiles:</entry>
<entrylang="sl"key="IDT_RANDOM_POOL_ENRICHMENT_NOTE">POMEMBNO: Premikajte Vašo miško kolikor se da naključno znotraj tega okna. Dalj časa ko jo boste premikali, bolje bo. Slednje namreč znatno povečuje kriptografsko moč ključne datoteke. Ko končate, kliknite 'Nadaljuj'.</entry>
<entrylang="en"key="ACCESSMODEFAIL">The read-only attribute on your old volume could not be changed. Please check the file access permissions.</entry>
<entrylang="en"key="ACCESS_DENIED">Error: Access denied.\n\nThe partition you are trying to access is either 0 sectors long, or it is the boot device.</entry>
<entrylang="en"key="ADMIN_PRIVILEGES_DRIVER">In order to load the VeraCrypt driver, you need to be logged into an account with administrator privileges.</entry>
<entrylang="en"key="ADMIN_PRIVILEGES_WARN_DEVICES">Please note that in order to encrypt, decrypt or format a partition/device you need to be logged into an account with administrator privileges.\n\nThis does not apply to file-hosted volumes.</entry>
<entrylang="en"key="ADMIN_PRIVILEGES_WARN_MANAGE_VOLUME">Unable to activate fast file creation: Administrator privileges required.\nPlease relaunch the program as an Administrator to enable this feature.\n\nWould you like to proceed without fast file creation?</entry>
<entrylang="en"key="ADMIN_PRIVILEGES_WARN_HIDVOL">In order to create a hidden volume you need to be logged into an account with administrator privileges.\n\nContinue?</entry>
<entrylang="en"key="ADMIN_PRIVILEGES_WARN_NTFS">Please note that in order to format the volume as NTFS you need to be logged into an account with administrator privileges.\n\nWithout administrator privileges, you can format the volume as FAT.</entry>
<entrylang="sl"key="AES_HELP">Šifra, ki je bila oddobrena s strani FIPS (Rijndael, objavljen leta 1998) in se lahko uporablja v ameriških vladnih oddelkih ter agencij, z namenom zaščite zaupnih informacij do nivoja Najbolj zaupno. V uporabi je 256-bitni ključ, 128-bitni blok, 14 rund (AES-256). Način delovanja je XTS.</entry>
<entrylang="en"key="ALREADY_MOUNTED">Volume is already mounted.</entry>
<entrylang="en"key="ERR_SELF_TESTS_FAILED">CAUTION: At least one encryption or hash algorithm failed the built-in automatic self-tests!\n\nVeraCrypt installation may be corrupted.</entry>
<entrylang="en"key="ERR_NOT_ENOUGH_RANDOM_DATA">CAUTION: There is not enough data in the Random Number Generator pool to provide the requested amount of random data.\n\nYou should not proceed any further. Please select 'Report a Bug' from the Help menu, and report this error.</entry>
<entrylang="en"key="ERR_HARDWARE_ERROR">The drive is damaged (there is a physical defect on it) or a cable is damaged, or the memory is malfunctioning.\n\nPlease note that this is a problem with your hardware, not with VeraCrypt. Therefore, please do NOT report this as a bug/problem in VeraCrypt and please do NOT ask for help with this in the VeraCrypt Forums. Please contact your computer vendor's technical support team for assistance. Thank you.\n\nNote: If the error occurs repeatedly at the same place, it is very likely caused by a bad disk block, which should be possible to correct using third-party software (note that, in many cases, the 'chkdsk /r' command cannot correct it because it works only at the filesystem level; in some cases, the 'chkdsk' tool cannot even detect it).</entry>
<entrylang="en"key="DEVICE_NOT_READY_ERROR">If you are accessing a drive for removable media, please make sure that a medium is inserted in the drive. The drive/medium may also be damaged (there may be a physical defect on it) or a cable may be damaged/disconnected.</entry>
<entrylang="en"key="WHOLE_DRIVE_ENCRYPTION_PREVENTED_BY_DRIVERS">Your system appears to be using custom chipset drivers containing a bug that prevents encryption of the whole system drive.\n\nPlease try updating or uninstalling any custom (non-Microsoft) chipset drivers before proceeding. If it does not help, try encrypting the system partition only.</entry>
<entrylang="sl"key="HIDDEN_VOLUME_TYPE_HELP">Lahko se Vam zgodi, da morate pod prisilo nekoga razkriti geslo do Vašega šifriranega zbirnika. Obstaja veliko okoliščin, ko ne želite razkriti Vašega gesla (na primer zaradi izsiljevanja). Uporaba tako imenovanega skritega zbirnika Vam omogoča rešitev tovrstnih okoliščin, ne da bi Vam bilo potrebno razkriti geslo do Vašega zbirnika.</entry>
<entrylang="sl"key="NORMAL_VOLUME_TYPE_HELP">Izberite to možnost, če želite ustvariti običajen VeraCrypt-ov zbirnik.</entry>
<entrylang="en"key="HIDDEN_OS_PRECLUDES_SINGLE_KEY_WDE">Please note that if you wish an operating system to be installed in a hidden partition-hosted volume, then the entire system drive cannot be encrypted using a single key.</entry>
<entrylang="sl"key="CIPHER_HIDVOL_HOST_TITLE">Šifrirne možnosti zunanjega zbirnika</entry>
<entrylang="en"key="CLEAN_WINMRU_FAILED">WARNING: Failed to clear the path of the last selected volume/keyfile (remembered by file selector)!</entry>
<entrylang="en"key="COMPRESSION_NOT_SUPPORTED">Error: The container has been compressed at the filesystem level. VeraCrypt does not support compressed containers (note that compression of encrypted data is ineffective and redundant).\n\nPlease disable compression for the container by following these steps:\n1) Right-click the container in Windows Explorer (not in VeraCrypt).\n2) Select 'Properties'.\n3) In the 'Properties' dialog box, click 'Advanced'.\n4) In the 'Advanced Attributes' dialog box, disable the option 'Compress contents to save disk space' and click 'OK'.\n5) In the 'Properties' dialog box, click 'OK'.</entry>
<entrylang="en"key="CREATE_FAILED">Failed to create volume %s</entry>
<entrylang="sl"key="DEVICE_FREE_BYTES">Velikost %s je %.2f bajtov</entry>
<entrylang="sl"key="DEVICE_FREE_KB">Velikost %s je %.2f KB</entry>
<entrylang="sl"key="DEVICE_FREE_MB">Velikost %s je %.2f MB</entry>
<entrylang="sl"key="DEVICE_FREE_GB">Velikost %s je %.2f GB</entry>
<entrylang="sl"key="DEVICE_FREE_TB">Velikost %s je %.2f TB</entry>
<entrylang="sl"key="DEVICE_FREE_PB">Velikost %s je %.2f PB</entry>
<entrylang="en"key="DEVICE_IN_USE_FORMAT">WARNING: The device/partition is in use by the operating system or applications. Formatting the device/partition might cause data corruption and system instability.\n\nContinue?</entry>
<entrylang="en"key="DEVICE_IN_USE_INPLACE_ENC">Warning: The partition is in use by the operating system or applications. You should close any applications that might be using the partition (including antivirus software).\n\nContinue?</entry>
<entrylang="en"key="FORMAT_CANT_DISMOUNT_FILESYS">Error: The device/partition contains a file system that could not be dismounted. The file system may be in use by the operating system. Formatting the device/partition would very likely cause data corruption and system instability.\n\nTo solve this issue, we recommend that you first delete the partition and then recreate it without formatting. To do so, follow these steps:\n1) Right-click the 'Computer' (or 'My Computer') icon in the 'Start Menu' and select 'Manage'. The 'Computer Management' window should appear.\n2) In the 'Computer Management' window, select 'Storage' > 'Disk Management'.\n3) Right-click the partition you want to encrypt and select either 'Delete Partition', or 'Delete Volume', or 'Delete Logical Drive'.\n4) Click 'Yes'. If Windows asks you to restart the computer, do so. Then repeat the steps 1 and 2 and continue from the step 5.\n5) Right-click the unallocated/free space area and select either 'New Partition', or 'New Simple Volume', or 'New Logical Drive'.\n6) The 'New Partition Wizard' or 'New Simple Volume Wizard' window should appear now; follow its instructions. On the wizard page entitled 'Format Partition', select either 'Do not format this partition' or 'Do not format this volume'. In the same wizard, click 'Next' and then 'Finish'.\n7) Note that the device path you have selected in VeraCrypt may be wrong now. Therefore, exit the VeraCrypt Volume Creation Wizard (if it is still running) and then start it again.\n8) Try encrypting the device/partition again.\n\nIf VeraCrypt repeatedly fails to encrypt the device/partition, you may want to consider creating a file container instead.</entry>
<entrylang="en"key="INPLACE_ENC_CANT_LOCK_OR_DISMOUNT_FILESYS">Error: The filesystem could not be locked and/or dismounted. It may be in use by the operating system or applications (for example, antivirus software). Encrypting the partition might cause data corruption and system instability.\n\nPlease close any applications that might be using the filesystem (including antivirus software) and try again. If it does not help, please follow the below steps.</entry>
<entrylang="en"key="DEVICE_IN_USE_INFO">WARNING: Some of the mounted devices/partitions were already in use!\n\nIgnoring this can cause undesired results including system instability.\n\nWe strongly recommend that you close any application that might be using the devices/partitions.</entry>
<entrylang="en"key="DEVICE_PARTITIONS_ERR">The selected device contains partitions.\n\nFormatting the device might cause system instability and/or data corruption. Please either select a partition on the device, or remove all partitions on the device to enable VeraCrypt to format it safely.</entry>
<entrylang="en"key="DEVICE_PARTITIONS_ERR_W_INPLACE_ENC_NOTE">The selected non-system device contains partitions.\n\nEncrypted device-hosted VeraCrypt volumes can be created within devices that do not contain any partitions (including hard disks and solid-state drives). A device that contains partitions can be entirely encrypted in place (using a single master key) only if it is the drive where Windows is installed and from which it boots.\n\nIf you want to encrypt the selected non-system device using a single master key, you will need to remove all partitions on the device first to enable VeraCrypt to format it safely (formatting a device that contains partitions might cause system instability and/or data corruption). Alternatively, you can encrypt each partition on the drive individually (each partition will be encrypted using a different master key).\n\nNote: If you want to remove all partitions from a GPT disk, you may need to convert it to a MBR disk (using e.g. the Computer Management tool) in order to remove hidden partitions.</entry>
<entrylang="en"key="WHOLE_NONSYS_DEVICE_ENC_CONFIRM">Warning: If you encrypt the entire device (as opposed to encrypting only a partition on it), operating systems will consider the device as new, empty, and unformatted (as it will contain no partition table) and may spontaneously initialize the device (or ask you if you want to do so), which may damage the volume. Furthermore, it will not be possible to consistently mount the volume as favorite (e.g. when the drive number changes) or to assign a favorite-volume label to it.\n\nTo avoid that you may want to consider creating a partition on the device and encrypting the partition instead.\n\nAre you sure want to encrypt the entire device?</entry>
<entrylang="en"key="AFTER_FORMAT_DRIVE_LETTER_WARN">IMPORTANT: Please keep in mind that this volume can NOT be mounted/accessed using the drive letter %c:, which is currently assigned to it!\n\nTo mount this volume, click 'Auto-Mount Devices' in the main VeraCrypt window (alternatively, in the main VeraCrypt window, click 'Select Device', then select this partition/device, and click 'Mount'). The volume will be mounted to a different drive letter, which you select from the list in the main VeraCrypt window.\n\nThe original drive letter %c: should be used only in case you need to remove encryption from the partition/device (e.g., if you no longer need encryption). In such a case, right-click the drive letter %c: in the 'Computer' (or 'My Computer') list and select 'Format'. Otherwise, the drive letter %c: should never be used (unless you remove it, as described e.g. in the VeraCrypt FAQ, and assign it to another partition/device).</entry>
<entrylang="sl"key="OS_NOT_SUPPORTED_FOR_NONSYS_INPLACE_ENC">Šifriranje na mestu nesistemskih zbirnikov ni omogočeno (možno) na različici operacijskega sistema katerega trenutno uporabljate (ta možnost je podprta samo na Oknih Vista in poznejših različicah Oken).\n\nRazlog za to je, da ta različica Oken ne podpira možnosti zmanjšanja velikosti datotečnega sistema (slednji se mora skrčiti zato da se ustvari prostor za glavo zbirnika in pomožno glavo le-tega).</entry>
<entrylang="en"key="ONLY_NTFS_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nNote: The reason is that Windows does not support shrinking of other types of filesystems (the filesystem needs to be shrunk to make space for the volume header and backup header).</entry>
<entrylang="en"key="ONLY_MOUNTED_VOL_SUPPORTED_FOR_NONSYS_INPLACE_ENC">The selected partition does not appear to contain an NTFS filesystem. Only partitions that contain an NTFS filesystem can be encrypted in place.\n\nIf you want to create an encrypted VeraCrypt volume within this partition, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</entry>
<entrylang="en"key="PARTITION_TOO_SMALL_FOR_NONSYS_INPLACE_ENC">Error: The partition is too small. VeraCrypt cannot encrypt it in place.</entry>
<entrylang="sl"key="INPLACE_ENC_ALTERNATIVE_STEPS">Da lahko šifrirate podatke na tem razdelku, prosim da sledite naslednjim korakom:\n\n1) Ustvarite VeraCrypt-ov zbirnik na praznem razdelku/napravi in ga priklopite.\n\n2) Prekopirajte vse datoteke iz razdelka, katerega ste prvotno želeli šifirati, v priklopljeni VeraCrypt-ov zbirnik (kateri je bil ustvarjen in priklopljen v koraku 1).\n\n3) Ustvarite VeraCrypt-ov zbirnik na razdelku katerega ste prvotno želeli šifirati in se prepričajte, da (v VeraCrypt-ovem čarovniku namreč) izberete možnost "Ustvari šifrirani zbirnik in ga formatiraj" (namesto možnosti "Na mestu šifriraj razdelek"). Zabeležite si, da bodo vsi podatki na razdelku izbrisani. Potem ko je zbirnik ustvarjen, ga priklopite.\n\n4) Prekopirajte vse datoteke iz priklopljenega pomožnega VeraCrypt-ovega zbirnika (ustvarjen in priklopljen v koraku 1) v priklopljeni VeraCrypt-ov zbirnik, kateri je bil ustvarjen (in priklopljen) v koraku 3.\n\nPotem ko dokončate vse te korake bodo podatki šifrirani in v nadaljevanju boste imeli tudi šifrirano pomožno kopijo podatkov.</entry>
<entrylang="en"key="RAW_DEV_NOT_SUPPORTED_FOR_INPLACE_ENC">VeraCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive.\n\nIf you want to create an encrypted VeraCrypt volume within the selected non-system device, choose the option "Create encrypted volume and format it" (instead of the option "Encrypt partition in place").</entry>
<entrylang="en"key="INPLACE_ENC_INVALID_PATH">Error: VeraCrypt can in-place encrypt only a partition, a dynamic volume, or an entire system drive. Please make sure the specified path is valid.</entry>
<entrylang="en"key="CANNOT_RESIZE_FILESYS">Error: Cannot shrink the filesystem (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPossible causes and solutions:\n\n- Not enough free space on the volume. Please make sure no other application is writing to the filesystem.\n\n- Corrupted file system. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
<entrylang="en"key="NOT_ENOUGH_FREE_FILESYS_SPACE_FOR_SHRINK">Error: There is not enough free space on the volume and so the filesystem cannot be shrunk (the filesystem needs to be shrunk to make space for the volume header and backup header).\n\nPlease delete any redundant files and empty the Recycle Bin so as to free at least 256 KB of space and then try again. Note that due to a Windows issue, the amount of free space reported by the Windows Explorer may be incorrect until the operating system is restarted. If restarting the system does not help, the file system may be corrupted. Try to check it and fix any errors (right-click the corresponding drive letter in the 'Computer' list, then select Properties > Tools > 'Check Now', make sure the option 'Automatically fix file system errors' is enabled and click Start).\n\nIf the above steps do not help, please follow the below steps.</entry>
<entrylang="sl"key="DISK_FREE_BYTES">Nezasedenega prostora na pogonu %s je %.2f bajtov.</entry>
<entrylang="sl"key="DISK_FREE_KB">Nezasedenega prostora na pogonu %s je %.2f KB</entry>
<entrylang="sl"key="DISK_FREE_MB">Nezasedenega prostora na pogonu %s je %.2f MB</entry>
<entrylang="sl"key="DISK_FREE_GB">Nezasedenega prostora na pogonu %s je %.2f GB</entry>
<entrylang="sl"key="DISK_FREE_TB">Nezasedenega prostora na pogonu %s je %.2f TB</entry>
<entrylang="sl"key="DISK_FREE_PB">Nezasedenega prostora na pogonu %s je %.2f PB</entry>
<entrylang="en"key="DRIVELETTERS">Could not get available drive letters.</entry>
<entrylang="en"key="DRIVER_NOT_FOUND">Error: VeraCrypt driver not found.\n\nPlease copy the files 'veracrypt.sys' and 'veracrypt-x64.sys' to the directory where the main VeraCrypt application (VeraCrypt.exe) is located.</entry>
<entrylang="en"key="DRIVER_VERSION">Error: An incompatible version of the VeraCrypt driver is currently running.\n\nIf you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already installed, you must uninstall it first (or upgrade it using the VeraCrypt installer). To uninstall it, follow these steps: On Windows Vista or later, select 'Start Menu' > Computer > 'Uninstall or change a program' > VeraCrypt > Uninstall; on Windows XP, select 'Start Menu' > Settings > 'Control Panel' > 'Add Or Remove Programs' > VeraCrypt > Remove.\n\nSimilarly, if you are trying to run VeraCrypt in portable mode (i.e. without installing it) and a different version of VeraCrypt is already running in portable mode, you must restart the system first and then run only this new version.</entry>
<entrylang="en"key="ERR_CIPHER_INIT_WEAK_KEY">Error: A weak or a potentially weak key has been detected. The key will be discarded. Please try again.</entry>
<entrylang="en"key="EXCEPTION_REPORT">A critical error has occurred and VeraCrypt must be terminated. If this is caused by a bug in VeraCrypt, we would like to fix it. To help us, you can send us an automatically generated error report containing the following items:\n\n- Program version\n- Operating system version\n- Type of CPU\n- VeraCrypt component name\n- Checksum of VeraCrypt executable\n- Symbolic name of dialog window\n- Error category\n- Error address\n- VeraCrypt call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.\n\n%hs\n\nDo you want to send us the above error report?</entry>
<entrylang="en"key="EXCEPTION_REPORT_EXT">A critical error has occurred in your system, which requires VeraCrypt to be terminated.\n\nNote that this error has not been caused by VeraCrypt (so the VeraCrypt developers cannot fix it). Please, check your system for possible problems (e.g., system configuration, network connection, failing hardware components).</entry>
<entrylang="en"key="EXCEPTION_REPORT_EXT_FILESEL">A critical error has occurred in your system, which requires VeraCrypt to be terminated.\n\nIf this problem persists, you may want to try disabling or uninstalling applications that could potentially be causing this issue, such as antivirus or Internet security software, system "enhancers", "optimizers" or "tweakers", etc. If it does not help, you may want to try reinstalling your operating system (this problem may also be caused by malware).</entry>
<entrylang="en"key="SYSTEM_CRASHED_ASK_REPORT">VeraCrypt detected that the operating system recently crashed. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)\n\nDo you want VeraCrypt to check whether a bug in VeraCrypt could have caused the system crash?</entry>
<entrylang="en"key="ASK_KEEP_DETECTING_SYSTEM_CRASH">Do you want VeraCrypt to continue detecting system crashes?</entry>
<entrylang="en"key="NO_MINIDUMP_FOUND">VeraCrypt found no system crash minidump file.</entry>
<entrylang="en"key="ASK_DELETE_KERNEL_CRASH_DUMP">Do you want to delete the Windows crash dump file to free up disk space?</entry>
<entrylang="en"key="ASK_DEBUGGER_INSTALL">In order to analyze the system crash, VeraCrypt needs to install Microsoft Debugging Tools for Windows first.\n\nAfter you click OK, the Windows installer will download the Microsoft Debugging Tools installation package (16 MB) from a Microsoft server and install it (the Windows installer will be forwarded to the Microsoft server URL from the veracrypt.org server, which ensures that this feature works even if Microsoft changes the location of the installation package).</entry>
<entrylang="en"key="SYSTEM_CRASH_ANALYSIS_INFO">After you click OK, VeraCrypt will analyze the system crash. This may take up to several minutes.</entry>
<entrylang="en"key="DEBUGGER_NOT_FOUND">Please make sure the environment variable 'PATH' includes the path to 'kd.exe' (Kernel Debugger).</entry>
<entrylang="en"key="SYSTEM_CRASH_NO_VERACRYPT">It appears that VeraCrypt most likely did not cause the system crash. There are many potential reasons why the system could have crashed (for example, a failing hardware component, a bug in a device driver, etc.)</entry>
<entrylang="en"key="SYSTEM_CRASH_UPDATE_DRIVER">Results of the analysis indicate that updating the following driver might solve this issue: </entry>
<entrylang="en"key="SYSTEM_CRASH_REPORT">To help us determine whether there is a bug in VeraCrypt, you can send us an automatically generated error report containing the following items:\n- Program version\n- Operating system version\n- Type of CPU\n- Error category\n- Driver name and version\n- System call stack\n\nIf you select 'Yes', the following URL (which contains the entire error report) will be opened in your default Internet browser.</entry>
<entrylang="en"key="ASK_SEND_ERROR_REPORT">Do you want to send us the above error report?</entry>
<entrylang="en"key="EXT_PARTITION">Please create a logical drive for this extended partition, and then try again.</entry>
<entrylang="en"key="FILE_HELP">A VeraCrypt volume can reside in a file (called VeraCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A VeraCrypt container is just like any normal file (it can be, for example, moved or deleted as any normal file). Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created.\n\nWARNING: If you select an existing file, VeraCrypt will NOT encrypt it; the file will be deleted and replaced with the newly created VeraCrypt container. You will be able to encrypt existing files (later on) by moving them to the VeraCrypt container that you are about to create now.</entry>
<entrylang="en"key="FILE_HELP_HIDDEN_HOST_VOL">Select the location of the outer volume to be created (within this volume the hidden volume will be created later on).\n\nA VeraCrypt volume can reside in a file (called VeraCrypt container), which can reside on a hard disk, on a USB flash drive, etc. A VeraCrypt container can be moved or deleted as any normal file. Click 'Select File' to choose a filename for the container and to select the location where you wish the container to be created. If you select an existing file, VeraCrypt will NOT encrypt it; it will be deleted and replaced with the newly created container. You will be able to encrypt existing files (later on) by moving them to the VeraCrypt container you are about to create now.</entry>
<entrylang="sl"key="DEVICE_HELP">Šifrirani VeraCrypt-ovi zbirniki, ki gostujejo na napravah, se lahko ustvarjajo znotraj razdelkov na trdih diskih, SSD pogonih, USB spominskih ključev in na drugih pomnilnih napravah, ki to podpirajo. Razdelke se lahko tudi na mestu šifrira.\n\nV nadaljevanju se lahko šifrirani VeraCrypt-ovi zbirniki, ki gostujejo na napravah, ustvarijo znotraj naprav, ki ne vsebujejo nobenih razdelkov (vključno s trdimi diski in SSD pogoni).\n\nOpomba: Naprava, ki vsebuje razdelke je lahko v celoti šifrirana (z uporabo samo enega ključa), vendar samo če so na njej naložena Okna in če se iz nje zaganja.</entry>
<entrylang="en"key="DEVICE_HELP_NO_INPLACE">A device-hosted VeraCrypt volume can be created within a hard disk partition, solid-state drive, USB memory stick, and other storage devices.\n\nWARNING: Note that the partition/device will be formatted and all data currently stored on it will be lost.</entry>
<entrylang="sl"key="DEVICE_HELP_HIDDEN_HOST_VOL">\nIzberite mesto zunanjega zbirnika za ustvaritev (znotraj tega zbirnika bo ustvarjen skriti zbirnik v nadaljevanju).\n\nZunanji zbirniki se lahko ustvarjajo znotraj razdelkov na trdih diskih, SSD pogonih, USB spominskih ključev in na drugih pomnilnih napravah, ki to podpirajo. Zunanji zbirniki se lahko tudi ustvarijo znotraj naprav, ki ne vsebujejo nobenih razdelkov (vključno s trdimi diski in SSD pogoni).\n\nOPOZORILO: Zabeležite si, da bo razdelek/naprava formatiran-a in vsi podatki, ki so trenutno shranjeni na njej-m, bodo izgubljeni.</entry>
<entrylang="sl"key="FILE_HELP_HIDDEN_HOST_VOL_DIRECT">\nIzberite mesto že obstoječega VeraCrypt-ovega zbirnika, v katerem si želite ustvariti skriti zbirnik.</entry>
<entrylang="sl"key="FILE_IN_USE">OPOZORILO: Gostujoča datoteka/naprava je trenutno v uporabi !\n\nNeupoštevanje omenjenega lahko povzroči nezaželjene posledice, vključno z nestabilnim delovanjem sistema. Vsi programi, ki morebiti dostopajo ali uporabljajo gostujočo datoteko/napravo (npr., protivirusni program ali ali program za ustvarjanje rezervnih kopij) bi morali biti zaprti preden se priklopi zbirnik.\n\nNadaljujem s priklopom ?</entry>
<entrylang="en"key="FILE_IN_USE_FAILED">Error: Cannot mount volume. The host file/device is already in use. Attempt to mount without exclusive access failed as well.</entry>
<entrylang="en"key="FILE_OPEN_FAILED">The file could not be opened.</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_QUESTION">Do you intend to store files larger than 4 GB in this VeraCrypt volume?</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_EXPLANATION">Depending on your choice above, VeraCrypt will choose a suitable default file system for the VeraCrypt volume (you will be able to select a file system in the next step).</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL">As you are creating an outer volume, you should consider choosing 'No'. If you choose 'Yes', the default filesystem will be NTFS, which is not as suitable for outer volumes as FAT (for example, the maximum possible size of the hidden volume will be significantly greater if the outer volume is formatted as FAT). Normally, FAT is the default for both hidden and normal volumes (so FAT volumes are not suspicious). However, if the user indicates intent to store files larger than 4 GB (which the FAT file system does not allow), then FAT is not the default.</entry>
<entrylang="en"key="FILESYS_PAGE_HELP_EXPLANATION_HIDVOL_CONFIRM">Are you sure you want to choose 'Yes'?</entry>
<entrylang="sl"key="DEVICE_TRANSFORM_MODE_PAGE_FORMAT_HELP">To je najhitrejši način, da ustvarite gostujoči razdelek ali gostujoči VeraCrypt-ov razdelek na napravi (za razliko šifriranja na mestu, kar je druga možnost, vendar je slednja počasnejša zaradi tega, ker se mora vsebina v vsakem sektorju prvo prebrati, nato šifrirati in na koncu zapisati). Katerikoli podatki, ki so trenutno shranjeni na izbranem razdelku/napravi, bodo izgubljeni (podatki NE BODO šifrirani; prepisani bodo z naključnimi podatki). Če želite šifrirati obstoječe podatke na razdelku, potem izberite spodnjo možnost.</entry>
<entrylang="sl"key="DEVICE_TRANSFORM_MODE_PAGE_INPLACE_HELP">V celoti izbran razdelek in vsi podatki shranjeni na njem bodo na mestu šifirani. Če je razdelek prazen, potem bi morali izbrati zgornjo možnost (zbirnik bo ustvarjen mnogo hitreje).</entry>
<entrylang="en"key="SHOW_MORE_INFORMATION">Show more information</entry>
<entrylang="en"key="DO_NOT_SHOW_THIS_AGAIN">Do not show this again</entry>
<entrylang="en"key="WIPE_FINISHED">The content of the partition/device has been successfully erased.</entry>
<entrylang="en"key="WIPE_FINISHED_DECOY_SYSTEM_PARTITION">The content of the partition where the original system (of which the hidden system is a clone) resided has been successfully erased.</entry>
<entrylang="en"key="DECOY_OS_VERSION_WARNING">Please make sure the version of Windows you are going to install (on the wiped partition) is the same as the version of Windows you are currently running. This is required due to the fact that both systems will share a common boot partition.</entry>
<entrylang="en"key="SYSTEM_ENCRYPTION_FINISHED">The system partition/drive has been successfully encrypted.\n\nNote: If there are non-system VeraCrypt volumes that you need to have mounted automatically every time Windows starts, you can set it up by mounting each of them and selecting 'Favorites' > 'Add Mounted Volume to System Favorites').</entry>
<entrylang="en"key="SYSTEM_DECRYPTION_FINISHED">The system partition/drive has been successfully decrypted.</entry>
<entrylang="sl"key="FORMAT_FINISHED_HELP">\n\nVeraCrypt-ov zbirnik je bil ustvarjen in je pripravljen za uporabo. Če želite ustvariti še kakšen VeraCrypt-ov zbirnik, kliknite Naprej. V nasprotnem primeru pa kliknite Izhod.</entry>
<entrylang="en"key="SYSENC_HIDDEN_VOL_FORMAT_FINISHED_HELP">\n\nThe hidden VeraCrypt volume has been successfully created (the hidden operating system will reside within this hidden volume).\n\nClick Next to continue.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_FINISHED_INFO">IMPORTANT: TO MOUNT THIS NEWLY CREATED VERACRYPT VOLUME AND TO ACCESS DATA STORED IN IT, CLICK 'Auto-Mount Devices' IN THE MAIN VERACRYPT WINDOW. After you enter the correct password (and/or supply correct keyfiles), the volume will be mounted to the drive letter you select from the list in the main VeraCrypt window (and you will be able to access the encrypted data via the selected drive letter).\n\nPLEASE REMEMBER OR WRITE DOWN THE ABOVE STEPS. YOU MUST FOLLOW THEM WHENEVER YOU WANT TO MOUNT THE VOLUME AND ACCESS DATA STORED IN IT. Alternatively, in the main VeraCrypt window, click 'Select Device', then select this partition/volume, and click 'Mount'.\n\nThe partition/volume has been successfully encrypted (it contains a fully encrypted VeraCrypt volume now) and is ready for use.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_FINISHED_INFO">The VeraCrypt volume has been successfully decrypted.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_FINISHED_DRIVE_LETTER_SEL_INFO">The VeraCrypt volume has been successfully decrypted.\n\nPlease select a drive letter that you wish to assign to the decrypted volume and then click Finish.\n\nIMPORTANT: Until a drive letter is assigned to the decrypted volume, you will not be able to access data stored on the volume.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_FINISHED_NO_DRIVE_LETTER_AVAILABLE">Warning: To be able to access the decrypted data, a drive letter needs to be assigned to the decrypted volume. However, no drive letter is currently available.\n\nPlease vacate a drive letter (for example, by disconnecting a USB flash drive or external hard drive, etc.) and then click OK.</entry>
<entrylang="sl"key="FORMAT_FINISHED_INFO">VeraCrypt-ov zbirnik je bil uspešno ustvarjen.</entry>
<entrylang="sl"key="FORMAT_HELP">POMEMBNO: Premikajte Vašo miško kolikor se da naključno znotraj tega okna. Dalj časa ko jo boste premikali, bolje bo. Slednje namreč znatno povečuje kriptografsko moč šifrirnih ključev. Nato kliknite Formatiraj, da ustvarite zbirnik.</entry>
<entrylang="sl"key="FORMAT_HIDVOL_HOST_HELP">Kliknite Formatiraj, da ustvarite zunanji zbirnik. Za več informacij si poglejte dokumentacijo.</entry>
<entrylang="en"key="HELP_READER_ERROR">Adobe Reader (or a compatible tool) is necessary to view or print the VeraCrypt User's Guide. Adobe Reader (freeware) can be downloaded at: www.adobe.com\n\nDo you want to view the online documentation instead?</entry>
<entrylang="sl"key="HIDDEN_VOL_WIZARD_MODE_NORMAL_HELP">Če izberete to možnost, Vam bo čarovnik prvo pomagal ustvariti običajen VeraCrypt-ov zbirnik, nato pa še skritega znotraj njega. Neizkušeni uporabniki bi morali zmeraj uporabiti to možnost.</entry>
<entrylang="sl"key="HIDDEN_VOL_WIZARD_MODE_DIRECT_HELP">Če izberete to možnost, boste ustvarili skriti zbirnik znotraj obstoječega VeraCrypt-ovega zbirnika. Predvideva se, da ste si že ustvarili TruCrypt-ov zbirnik, ki je primeren za gostovanje skritega.</entry>
<entrylang="sl"key="HIDVOL_FORMAT_FINISHED_TITLE">Skriti zbirnik je ustvarjen</entry>
<entrylang="en"key="HIDVOL_FORMAT_FINISHED_HELP">The hidden VeraCrypt volume has been successfully created and is ready for use. If all the instructions have been followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide are followed, it should be impossible to prove that the hidden volume exists, even when the outer volume is mounted.\n\nWARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (FOR INFORMATION ON HOW TO DO SO, REFER TO THE SECTION "PROTECTION OF HIDDEN VOLUMES AGAINST DAMAGE" IN THE VERACRYPT USER'S GUIDE), DO NOT WRITE TO THE OUTER VOLUME. OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME!</entry>
<entrylang="en"key="FIRST_HIDDEN_OS_BOOT_INFO">You have started the hidden operating system. As you may have noticed, the hidden operating system appears to be installed on the same partition as the original operating system. However, in reality, it is installed within the partition behind it (in the hidden volume). All read and write operations are being transparently redirected from the original system partition to the hidden volume.\n\nNeither the operating system nor applications will know that data written to and read from the system partition are actually written to and read from the partition behind it (from/to a hidden volume). Any such data is encrypted and decrypted on the fly as usual (with an encryption key different from the one that will be used for the decoy operating system).\n\n\nPlease click Next to continue.</entry>
<entrylang="en"key="HIDVOL_HOST_FILLING_HELP_SYSENC">The outer volume has been created and mounted as drive %hc:. To this outer volume you should now copy some sensitive-looking files that you actually do NOT want to hide. They will be there for anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. You will be able to reveal the password for this outer volume, and the existence of the hidden volume (and of the hidden operating system) will remain secret.\n\nIMPORTANT: The files you copy to the outer volume should not occupy more than %s. Otherwise, there may not be enough free space on the outer volume for the hidden volume (and you will not be able to continue). After you finish copying, click Next (do not dismount the volume).</entry>
<entrylang="sl"key="HIDVOL_HOST_FILLING_HELP">Zunanji zbirnik je bil uspešno ustvarjen in priklopljen kot pogon %hc:. Na ta zbirnik lahko sedaj prekopirate nekaj na videz občutljivih datotek, ki jih pravzaprav NE želite skriti. Datoteke se bodo nahajale tam za na ogled vsakomur, ki Vas bo prisilil v razkritje Vašega gesla. Razkrili boste geslo samo za ta zunanji zbirnik, ne pa za skritega. Datoteke, za katere Vam je pa res mar, bodo pa shranjene v skritem zbirniku, ki ga boste ustvarili v nadaljevanju. Ko končate s kopiranjem kliknite Naprej. Ne odklopite zbirnika.\n\nNote: Potem ko kliknete Naprej bodo grozdi o prostih informacijah od zunanjega zbirnika pregledani, da se ugotovi velikost neprekinjenega dela nezasedenega prostora, čigar konec je poravnan s koncem zbirnika. Ta prostor bo gostil skriti zbirnik tako da bo omejil njegovo najvišjo možno velikost. Pregledovanje grozdov o prostih informacijah zagotavlja, da se ne bodo prepisovali podatki iz skritega zbirnika na zunanjega.</entry>
<entrylang="sl"key="HIDVOL_HOST_PRE_CIPHER_HELP">\n\nV naslednjih korakih boste nastavili možnosti za zunanji zbirnik (znotraj katerega bo ustvarjen skriti zbirnik v nadaljevanju).</entry>
<entrylang="en"key="HIDVOL_HOST_PRE_CIPHER_HELP_SYSENC">\n\nIn the next steps, you will create a so-called outer VeraCrypt volume within the first partition behind the system partition (as was explained in one of the previous steps).</entry>
<entrylang="en"key="HIDDEN_OS_PRE_CIPHER_HELP">In the following steps, you will set the options and password for the hidden volume, which will contain the hidden operating system.\n\nRemark: The cluster bitmap of the outer volume has been scanned in order to determine the size of uninterrupted area of free space whose end is aligned with the end of the outer volume. This area will accommodate the hidden volume, so it limits its maximum possible size. The maximum possible size of the hidden volume has been determined and confirmed to be greater than the size of the system partition (which is required, because the entire content of the system partition will need to be copied to the hidden volume). This ensures that no data currently stored on the outer volume will be overwritten by data written to the area of the hidden volume.</entry>
<entrylang="en"key="HIDDEN_OS_PRE_CIPHER_WARNING">IMPORTANT: Please remember the algorithms that you select in this step. You will have to select the same algorithms for the decoy system. Otherwise, the hidden system will be inaccessible! (The decoy system must be encrypted with the same encryption algorithm as the hidden system.)\n\nNote: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the VeraCrypt Boot Loader).</entry>
<entrylang="sl"key="HIDVOL_PRE_CIPHER_HELP">\n\nGrozdi o prostih informacijah od zbirnika so bili pregledani in najvišja možna velikost skritega zbirnika je bila ugotovljena. V naslednjih korakih boste nastavili možnosti, velikost in geslo za skriti zbirnik.</entry>
<entrylang="en"key="HIDVOL_PROT_WARN_AFTER_MOUNT">The hidden volume is now protected against damage until the outer volume is dismounted.\n\nWARNING: If any data is attempted to be saved to the hidden volume area, VeraCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to the hidden volume area will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</entry>
<entrylang="en"key="HIDVOL_PROT_WARN_AFTER_MOUNT_PLURAL">Each of the hidden volumes within the newly mounted volumes is now protected against damage until dismounted.\n\nWARNING: If any data is attempted to be saved to protected hidden volume area of any of these volumes, VeraCrypt will start write-protecting the entire volume (both the outer and the hidden part) until it is dismounted. This may cause filesystem corruption on the outer volume, which (if repeated) might adversely affect plausible deniability of the hidden volume. Therefore, you should make every effort to avoid writing to the hidden volume area. Any data being saved to protected hidden volume areas will not be saved and will be lost. Windows may report this as a write error ("Delayed Write Failed" or "The parameter is incorrect").</entry>
<entrylang="en"key="DAMAGE_TO_HIDDEN_VOLUME_PREVENTED">WARNING: Data were attempted to be saved to the hidden volume area of the volume mounted as %c:! VeraCrypt prevented these data from being saved in order to protect the hidden volume. This may have caused filesystem corruption on the outer volume and Windows may have reported a write error ("Delayed Write Failed" or "The parameter is incorrect"). The entire volume (both the outer and the hidden part) will be write-protected until it is dismounted. If this is not the first time VeraCrypt has prevented data from being saved to the hidden volume area of this volume, plausible deniability of this hidden volume might be adversely affected (due to possible unusual correlated inconsistencies within the outer volume file system). Therefore, you should consider creating a new VeraCrypt volume (with Quick Format disabled) and moving files from this volume to the new volume; this volume should be securely erased (both the outer and the hidden part). We strongly recommend that you restart the operating system now.</entry>
<entrylang="en"key="CANNOT_SATISFY_OVER_4G_FILE_SIZE_REQ">You have indicated intent to store files larger than 4 GB on the volume. This requires the volume to be formatted as NTFS, which, however, will not be possible.</entry>
<entrylang="en"key="CANNOT_CREATE_NON_HIDDEN_NTFS_VOLUMES_UNDER_HIDDEN_OS">Please note that when a hidden operating system is running, non-hidden VeraCrypt volumes cannot be formatted as NTFS. The reason is that the volume would need to be temporarily mounted without write protection in order to allow the operating system to format it as NTFS (whereas formatting as FAT is performed by VeraCrypt, not by the operating system, and without mounting the volume). For further technical details, see below. You can create a non-hidden NTFS volume from within the decoy operating system.</entry>
<entrylang="en"key="HIDDEN_VOL_CREATION_UNDER_HIDDEN_OS_HOWTO">For security reasons, when a hidden operating system is running, hidden volumes can be created only in the 'direct' mode (because outer volumes must always be mounted as read-only). To create a hidden volume securely, follow these steps:\n\n1) Boot the decoy system.\n\n2) Create a normal VeraCrypt volume and, to this volume, copy some sensitive-looking files that you actually do NOT want to hide (the volume will become the outer volume).\n\n3) Boot the hidden system and start the VeraCrypt Volume Creation Wizard. If the volume is file-hosted, move it to the system partition or to another hidden volume (otherwise, the newly created hidden volume would be mounted as read-only and could not be formatted). Follow the instructions in the wizard so as to select the 'direct' hidden volume creation mode.\n\n4) In the wizard, select the volume you created in step 2 and then follow the instructions to create a hidden volume within it.</entry>
<entrylang="en"key="HIDDEN_OS_WRITE_PROTECTION_BRIEF_INFO">For security reasons, when a hidden operating system is running, local unencrypted filesystems and non-hidden VeraCrypt volumes are mounted as read-only (no data can be written to such filesystems or VeraCrypt volumes).\n\nData is allowed to be written to any filesystem that resides within a hidden VeraCrypt volume (provided that the hidden volume is not located in a container stored on an unencrypted filesystem or on any other read-only filesystem).</entry>
<entrylang="en"key="HIDDEN_OS_WRITE_PROTECTION_EXPLANATION">There are three main reasons why such countermeasures have been implemented:\n\n- It enables the creation of a secure platform for mounting of hidden VeraCrypt volumes. Note that we officially recommend that hidden volumes are mounted only when a hidden operating system is running. (For more information, see the subsection 'Security Requirements and Precautions Pertaining to Hidden Volumes' in the documentation.)\n\n- In some cases, it is possible to determine that, at a certain time, a particular filesystem was not mounted under (or that a particular file on the filesystem was not saved or accessed from within) a particular instance of an operating system (e.g. by analyzing and comparing filesystem journals, file timestamps, application logs, error logs, etc). This might indicate that a hidden operating system is installed on the computer. The countermeasures prevent these issues.\n\n- It prevents data corruption and allows safe hibernation. When Windows resumes from hibernation, it assumes that all mounted filesystems are in the same state as when the system entered hibernation. VeraCrypt ensures this by write-protecting any filesystem accessible both from within the decoy and hidden systems. Without such protection, the filesystem could become corrupted when mounted by one system while the other system is hibernated.</entry>
<entrylang="en"key="DECOY_TO_HIDDEN_OS_DATA_TRANSFER_HOWTO">Note: If you need to securely transfer files from the decoy system to the hidden system, follow these steps:\n1) Start the decoy system.\n2) Save the files to an unencrypted volume or to an outer/normal VeraCrypt volume.\n3) Start the hidden system.\n4) If you saved the files to a VeraCrypt volume, mount it (it will be automatically mounted as read-only).\n5) Copy the files to the hidden system partition or to another hidden volume.</entry>
<entrylang="en"key="CONFIRM_RESTART">Your computer must be restarted.\n\nDo you want to restart it now?</entry>
<entrylang="en"key="ERR_GETTING_SYSTEM_ENCRYPTION_STATUS">An error occurred when obtaining the system encryption status.</entry>
<entrylang="en"key="ERR_PASSWORD_MISSING">No password specified in the command line. The volume can't be created.</entry>
<entrylang="en"key="ERR_SIZE_MISSING">No volume size specified in the command line. The volume can't be created.</entry>
<entrylang="en"key="ERR_NTFS_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected NTFS filesystem.</entry>
<entrylang="en"key="ERR_FAT_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected FAT32 filesystem.</entry>
<entrylang="en"key="ERR_DYNAMIC_NOT_SUPPORTED">The filesystem on the target drive doesn't support creating sparse files which is required for dynamic volumes.</entry>
<entrylang="en"key="ERR_DEVICE_CLI_CREATE_NOT_SUPPORTED">Only container files can be created through the command line.</entry>
<entrylang="en"key="ERR_CONTAINER_SIZE_TOO_BIG">The container file size specified in the command line is greater than the available disk free space. Volume can't be created.</entry>
<entrylang="en"key="ERR_VOLUME_SIZE_TOO_SMALL">The volume size specified in the command line is too small. The volume can't be created.</entry>
<entrylang="en"key="ERR_VOLUME_SIZE_TOO_BIG">The volume size specified in the command line is too big. The volume can't be created.</entry>
<entrylang="en"key="INIT_SYS_ENC">Cannot initialize application components for system encryption.</entry>
<entrylang="en"key="INIT_RAND">Failed to initialize the random number generator!\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs, Last Error = 0x%.8X)</entry>
<entrylang="en"key="CAPI_RAND">Windows Crypto API failed!\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs, Last Error = 0x%.8X)</entry>
<entrylang="en"key="INIT_REGISTER">Unable to initialize the application. Failed to register the Dialog class.</entry>
<entrylang="en"key="INIT_RICHEDIT">Error: Failed to load the Rich Edit system library.</entry>
<entrylang="sl"key="INTRO_TITLE">VeraCrypt-ov čarovnik za ustvar. zbirnika</entry>
<entrylang="sl"key="MAX_HIDVOL_SIZE_BYTES">Najvišja možna velikost skritega zbirnika za ta zbirnik je %.2f bajtov.</entry>
<entrylang="sl"key="MAX_HIDVOL_SIZE_KB">Najvišja možna velikost skritega zbirnika za ta zbirnik je %.2f KB.</entry>
<entrylang="sl"key="MAX_HIDVOL_SIZE_MB">Najvišja možna velikost skritega zbirnika za ta zbirnik je %.2f MB.</entry>
<entrylang="sl"key="MAX_HIDVOL_SIZE_GB">Najvišja možna velikost skritega zbirnika za ta zbirnik je %.2f GB.</entry>
<entrylang="sl"key="MAX_HIDVOL_SIZE_TB">Najvišja možna velikost skritega zbirnika za ta zbirnik je %.2f TB.</entry>
<entrylang="sl"key="MOUNTED_NOPWCHANGE">Geslo ali ključne datoteke zbirnika ni moč spreminjati medtem ko je zbirnik priklopljen. Prosim, da slednjega prvo odklopite.</entry>
<entrylang="sl"key="MOUNTED_NO_PKCS5_PRF_CHANGE">Izpeljani algoritem iz ključa glave ni možno spreminjati medtem ko je zbirnik prikljopljen. Prosim, da slednjega prvo odklopite.</entry>
<entrylang="sl"key="NEW_VERSION_REQUIRED">Novejša različica programa VeraCrypt je potrebna, da lahko priklopite ta zbirnik.</entry>
<entrylang="en"key="VOL_CREATION_WIZARD_NOT_FOUND">Error: Volume Creation Wizard not found.\n\nPlease make sure that the file 'VeraCrypt Format.exe' is in the folder from which 'VeraCrypt.exe' was launched. If it is not, please reinstall VeraCrypt, or locate 'VeraCrypt Format.exe' on your disk and run it.</entry>
<entrylang="en"key="VOL_EXPANDER_NOT_FOUND">Error: Volume Expander not found.\n\nPlease make sure that the file 'VeraCryptExpander.exe' is in the folder from which 'VeraCrypt.exe' was launched. If it is not, please reinstall VeraCrypt, or locate 'VeraCryptExpander.exe' on your disk and run it.</entry>
<entrylang="en"key="NODRIVER">Unable to connect to the VeraCrypt device driver. VeraCrypt cannot work if the device driver is not running.\n\nPlease note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be loaded.</entry>
<entrylang="en"key="NOFONT">Error occurred when loading/preparing fonts.</entry>
<entrylang="en"key="NOT_FOUND">The drive letter was not found or no drive letter was specified.</entry>
<entrylang="en"key="ERR_CANNOT_ASSIGN_DRIVE_LETTER_NONSYS_DEC">Error: Cannot assign drive letter.\n\nUntil a drive letter is assigned to the decrypted volume, you will not be able to access data stored on the volume.\n\nRetry?</entry>
<entrylang="en"key="DRIVE_LETTER_UNAVAILABLE">Drive letter not available.</entry>
<entrylang="en"key="NO_SPACE_FOR_HIDDEN_VOL">Not enough free space for the hidden volume! Volume creation cannot continue.</entry>
<entrylang="en"key="HIDDEN_VOLUME_TOO_SMALL_FOR_OS_CLONE">Error: The files you copied to the outer volume occupy too much space. Therefore, there is not enough free space on the outer volume for the hidden volume.\n\nNote that the hidden volume must be as large as the system partition (the partition where the currently running operating system is installed). The reason is that the hidden operating system needs to be created by copying the content of the system partition to the hidden volume.\n\n\nThe process of creation of the hidden operating system cannot continue.</entry>
<entrylang="en"key="OPENFILES_DRIVER">The driver is unable to dismount the volume. Some files located on the volume are probably still open.</entry>
<entrylang="en"key="OPENFILES_LOCK">Unable to lock the volume. There are still open files on the volume. Therefore, it cannot be dismounted.</entry>
<entrylang="en"key="VOL_LOCK_FAILED_OFFER_FORCED_DISMOUNT">VeraCrypt cannot lock the volume because it is in use by the system or applications (there may be open files on the volume).\n\nDo you want to force dismount on the volume?</entry>
<entrylang="en"key="OUTOFMEMORY">Out of Memory</entry>
<entrylang="en"key="FORMAT_DEVICE_FOR_ADVANCED_ONLY">IMPORTANT: We strongly recommend that inexperienced users create a VeraCrypt file container on the selected device/partition, instead of attempting to encrypt the entire device/partition.\n\nWhen you create a VeraCrypt file container (as opposed to encrypting a device or partition) there is, for example, no risk of destroying a large number of files. Note that a VeraCrypt file container (even though it contains a virtual encrypted disk) is actually just like any normal file. For more information, see the chapter Beginner's Tutorial in the VeraCrypt User Guide.\n\nAre you sure you want to encrypt the entire device/partition?</entry>
<entrylang="en"key="OVERWRITEPROMPT">WARNING: The file '%s' already exists!\n\nIMPORTANT: VERACRYPT WILL NOT ENCRYPT THE FILE, BUT IT WILL DELETE IT. Are you sure you want to delete the file and replace it with a new VeraCrypt container?</entry>
<entrylang="sl"key="OVERWRITEPROMPT_DEVICE">PREVIDNO: VSE DATOTEKE, KI SO TRENUTNO SHRANJENE NA IZBRANEM RAZDELKU %s '%s'%s BODO POBRISANE IN IZGUBLJENE (NE BODO ŠIFRIRANE) !\n\nAli ste prepričani, da želite nadaljevati s formatiranjem ?</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully encrypted.\n\nAre you sure you want to start encrypting the selected %s '%s'%s?</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_CONFIRM">WARNING: You will not be able to mount the volume or access any files stored on it until it has been fully decrypted.\n\nAre you sure you want to start decrypting the selected %s '%s'%s?</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_CONFIRM_BACKUP">WARNING: Please note that if power supply is suddenly interrupted while encrypting/decrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while VeraCrypt is encrypting/decrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting/decrypting, please make sure that you have backup copies of the files you want to encrypt/decrypt.\n\nDo you have such a backup?</entry>
<entrylang="en"key="OVERWRITEPROMPT_DEVICE_HIDDEN_OS_PARTITION">CAUTION: ANY FILES CURRENTLY STORED ON THE PARTITION '%s'%s (I.E. ON THE FIRST PARTITION BEHIND THE SYSTEM PARTITION) WILL BE ERASED AND LOST (THEY WILL NOT BE ENCRYPTED)!\n\nAre you sure you want to proceed with format?</entry>
<entrylang="en"key="OVERWRITEPROMPT_DEVICE_SECOND_WARNING_LOTS_OF_DATA">WARNING: THE SELECTED PARTITION CONTAINS A LARGE AMOUNT OF DATA! Any files stored on the partition will be erased and lost (they will NOT be encrypted)!</entry>
<entrylang="en"key="ERASE_FILES_BY_CREATING_VOLUME">Erase any files stored on the partition by creating a VeraCrypt volume within it</entry>
<entrylang="sl"key="PASSWORD">Geslo</entry>
<entrylang="en"key="PIM">PIM</entry>
<entrylang="sl"key="IDD_PCDM_CHANGE_PKCS5_PRF">Nastavi izpeljani algoritem iz ključa glave</entry>
<entrylang="en"key="IDD_PCDM_REMOVE_ALL_KEYFILES_FROM_VOL">Remove All Keyfiles from Volume</entry>
<entrylang="en"key="PASSWORD_CHANGED">Password, PIM and/or keyfile(s) successfully changed.\n\nIMPORTANT: Please make sure you have read the section 'Changing Passwords and Keyfiles' in the chapter 'Security Requirements and Precautions' in the VeraCrypt User Guide.</entry>
<entrylang="en"key="FAVORITE_PIM_CHANGED">This volume is registered as a System Favorite and its PIM was changed.\nDo you want VeraCrypt to automatically update the System Favorite configuration (administrator privileges required)?\n\nPlease note that if you answer no, you'll have to update the System Favorite manually.</entry>
<entrylang="en"key="SYS_PASSWORD_CHANGED_ASK_RESCUE_DISK">IMPORTANT: If you did not destroy your VeraCrypt Rescue Disk, your system partition/drive can still be decrypted using the old password (by booting the VeraCrypt Rescue Disk and entering the old password). You should create a new VeraCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new VeraCrypt Rescue Disk?</entry>
<entrylang="en"key="SYS_HKD_ALGO_CHANGED_ASK_RESCUE_DISK">Note that your VeraCrypt Rescue Disk still uses the previous algorithm. If you consider the previous algorithm insecure, you should create a new VeraCrypt Rescue Disk and then destroy the old one.\n\nDo you want to create a new VeraCrypt Rescue Disk?</entry>
<entrylang="en"key="KEYFILES_NOTE">Note that VeraCrypt never modifies the keyfile contents. You can select more than one keyfile (the order does not matter). If you add a folder, all non-hidden files found in it will be used as keyfiles. Click 'Add Token Files' to select keyfiles stored on security tokens or smart cards (or to import keyfiles to security tokens or smart cards).</entry>
<entrylang="sl"key="NONSYS_INPLACE_ENC_RESUME_PASSWORD_PAGE_HELP">Prosim, da vnesete geslo in/ali ključno datoteko(e) za nesistemski zbirnik kjer želite nadaljevati proces šifriranja na mestu.\n\n\nOpomba: Potem ko kliknete Naprej bo VeraCrypt poizkusil najti vse nesistemske zbirnike kjer je bil proces šifriranja prekinjen in kjer je lahko glava VeraCrypt-ovega zbirnika dešifrirana z uporabo priloženega gesla in/ali ključne(ih) datotek(e). Če je najden več kot eden tovrsten zbirnik, potem boste morali izbrati enega izmed teh v naslednjem koraku.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_RESUME_VOL_SELECT_HELP">Please select one of the listed volumes. The list contains every accessible non-system volume where the process of encryption has been interrupted and whose header could be decrypted using the supplied password and/or keyfile(s).</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_PASSWORD_PAGE_HELP">Please enter the password and/or keyfile(s) for the non-system VeraCrypt volume that you want to decrypt.</entry>
<entrylang="sl"key="PASSWORD_HELP">Zelo pomembno je, da si izberete dobro geslo. Izogibajte se izbire gesla, ki vsebuje samo eno besedo in slednjo se da najti v slovarju (ali kombinacijo dveh, treh ali štirih tovrstnih besed). Naj tudi ne vsebuje kakršnihkoli imen ali datumov rojstva. Geslo naj ne bo lahko za uganjevanje. Dobro geslo je naključna kombinacija črk z veliko in malo začetnico, številk in posebnih znakov, kot @ ^ = $ * + itn. Pri izbiri gesla priporočamo sestavo le-tega iz več kot 20 znakov (daljše kot je, bolje je). Najvišja možna dolžina je 128 znakov. </entry>
<entrylang="sl"key="PASSWORD_HIDDENVOL_HELP">Prosim, da si izberete geslo za skriti zbirnik. </entry>
<entrylang="en"key="PASSWORD_HIDDEN_OS_HELP">Please choose a password for the hidden operating system (i.e. for the hidden volume). </entry>
<entrylang="en"key="PASSWORD_HIDDEN_OS_NOTE">IMPORTANT: The password that you choose for the hidden operating system in this step must be substantially different from the other two passwords (i.e. from the password for the outer volume and from the password for the decoy operating system).</entry>
<entrylang="sl"key="PASSWORD_HIDDENVOL_HOST_DIRECT_HELP">Prosim, da vnesete geslo za zbirnik znotraj katerega želite ustvariti skritega.\n\nPotem ko kliknete Naprej bo VeraCrypt poizkusil priklopiti zbirnik. Čim ko bo slednji priklopljen, bodo njegovi grozdi o prostih informacijah pregledani zato, da se ugotovi velikost neprekinjenega nezasedenega prostora (če ga je kje), čigar konec je poravnan s koncem zbirnika. Ta prostor bo gostil skriti zbirnik in tako torej omejil njegovo najvišjo možno velikost. Pregledovanje zemljevida grozdov je potrebno zato, da podatki iz skritega zbirnika ne bodo prepisali zunanjega.</entry>
<entrylang="sl"key="PASSWORD_HIDDENVOL_HOST_HELP">\nProsim, da si izberete geslo za zunanji zbirnik. Slednjega boste lahko razkrili nasprotniku, če boste povprašani po njem ali prisiljeni v to.\n\nPOMEMBNO: Geslo mora biti bistveno drugačno od tistega, ki si ga boste izbrali za skriti zbirnik.\n\nOpomba: Najvišja možna dolžina gesla znaša 128 znakov.</entry>
<entrylang="en"key="PASSWORD_SYSENC_OUTERVOL_HELP">Please choose a password for the outer volume. This will be the password you will be able to reveal to anyone forcing you to disclose the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) will reside. The existence of the hidden volume (and of the hidden operating system) will remain secret. Note that this password is not for the decoy operating system.\n\nIMPORTANT: The password must be substantially different from the one you will choose for the hidden volume (i.e. for the hidden operating system).</entry>
<entrylang="sl"key="PASSWORD_HIDVOL_TITLE">Geslo za skriti zbirnik</entry>
<entrylang="en"key="PASSWORD_HIDDEN_OS_TITLE">Password for Hidden Operating System</entry>
<entrylang="sl"key="PASSWORD_LENGTH_WARNING">OPOZORILO: Kratka gesla je lahko razbiti z tehniko pretentanja kriptografske sheme z uporabo več možnosti dešifriranja vsebine !\n\nPriporočamo izbiro gesla, ki ga sestavlja več kot 20 znakov. Ste prepričani, da želite uporabiti krajše geslo ?</entry>
<entrylang="sl"key="PASSWORD_TITLE">Geslo za zbirnik</entry>
<entrylang="sl"key="PASSWORD_WRONG">Napačno geslo ali pa se ne gre za VeraCrypt-ov zbirnik.</entry>
<entrylang="en"key="PASSWORD_OR_KEYFILE_WRONG">Incorrect keyfile(s) and/or password or not a VeraCrypt volume.</entry>
<entrylang="en"key="PASSWORD_OR_MODE_WRONG">Wrong mount mode, incorrect password, or not a VeraCrypt volume.</entry>
<entrylang="en"key="PASSWORD_OR_KEYFILE_OR_MODE_WRONG">Wrong mount mode, incorrect keyfile(s) and/or password, or not a VeraCrypt volume.</entry>
<entrylang="en"key="PASSWORD_WRONG_AUTOMOUNT">Incorrect password or no VeraCrypt volume found.</entry>
<entrylang="en"key="PASSWORD_OR_KEYFILE_WRONG_AUTOMOUNT">Incorrect keyfile(s)/password or no VeraCrypt volume found.</entry>
<entrylang="en"key="PASSWORD_WRONG_CAPSLOCK_ON">\n\nWarning: Caps Lock is on. This may cause you to enter your password incorrectly.</entry>
<entrylang="en"key="PIM_CHANGE_WARNING">Remember Number to Mount Volume</entry>
<entrylang="en"key="PIM_HIDDEN_OS_TITLE">PIM for Hidden Operating System</entry>
<entrylang="en"key="PIM_HELP">PIM (Personal Iterations Multiplier) is a value that controls the number of iterations used by the header key derivation as follows:\n Iterations = 15000 + (PIM x 1000).\n\nWhen left empty or set to 0, VeraCrypt will use a default value (485) that ensures a high security.\n\nWhen the password is less than 20 characters, PIM can't be smaller than 485 in order to maintain a minimal security level.\nWhen the password is 20 characters or more, PIM can be set to any value.\n\nA PIM value larger than 485 will lead to slower mount. A small PIM value (less than 485) will lead to a quicker mount but it can reduce security if the password is not strong enough.</entry>
<entrylang="en"key="PIM_SYSENC_HELP">PIM (Personal Iterations Multiplier) is a value that controls the number of iterations used by the header key derivation as follows:\n Iterations = PIM x 2048.\n\nWhen left empty or set to 0, VeraCrypt will use a default value that ensures a high security.\n\nWhen the password is less than 20 characters, PIM can't be smaller than 98 in order to maintain a minimal security level.\nWhen the password is 20 characters or more, PIM can be set to any value.\n\nA PIM value larger than 98 will lead to slower boot. A small PIM value (less than 98) will lead to a quicker boot but it can reduce security if the password is not strong enough.</entry>
<entrylang="en"key="PIM_SYSENC_CHANGE_WARNING">Remember Number to Boot System</entry>
<entrylang="en"key="PIM_LARGE_WARNING">You have chosen a PIM value that is larger than VeraCrypt default value.\nPlease note that this will lead to much slower mount/boot.</entry>
<entrylang="en"key="PIM_SMALL_WARNING">You have chosen a Personal Iterations Multiplier (PIM) that is smaller than the default VeraCrypt value. Please note that if your password is not strong enough, this could lead to a weaker security.\n\nDo you confirm that you are using a strong password?</entry>
<entrylang="en"key="PIM_SYSENC_TOO_BIG">Personal Iterations Multiplier (PIM) maximum value for system encryption is 65535.</entry>
<entrylang="en"key="PIM_TITLE">Volume PIM</entry>
<entrylang="en"key="HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWARNING: Hidden file(s) have been found in a keyfile search path. Such hidden files cannot be used as keyfiles. If you need to use them as keyfiles, remove their 'Hidden' attribute (right-click each of them, select 'Properties', uncheck 'Hidden' and click OK). Note: Hidden files are visible only if the corresponding option is enabled (Computer > Organize > 'Folder and search options' > View).</entry>
<entrylang="en"key="HIDDEN_VOL_PROT_PASSWORD_US_KEYB_LAYOUT">If you are attempting to protect a hidden volume containing a hidden system, please make sure you are using the standard US keyboard layout when typing the password for the hidden volume. This is required due to the fact that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available.</entry>
<entrylang="en"key="FOUND_NO_PARTITION_W_DEFERRED_INPLACE_ENC">VeraCrypt has not found any volume where non-system encryption has been interrupted and where the volume header can be decrypted using the supplied password and/or keyfile(s).\n\nPlease make sure the password and/or keyfile(s) are correct and that the partition/volume is not being used by the system or applications (including antivirus software).</entry>
<entrylang="en"key="SELECTED_PARTITION_ALREADY_INPLACE_ENC">The selected partition/device is already fully encrypted.\nHeader Flags = 0x%.8X</entry>
<entrylang="en"key="SELECTED_PARTITION_NOT_INPLACE_ENC">The selected partition/device is not using in-place encryption.\nHeader Flags = 0x%.8X</entry>
<entrylang="en"key="SYSENC_MOUNT_WITHOUT_PBA_NOTE">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'System' > 'Mount Without Pre-Boot Authentication'.</entry>
<entrylang="en"key="MOUNT_WITHOUT_PBA_VOL_ON_ACTIVE_SYSENC_DRIVE">In this mode, you cannot mount a partition located on a drive whose portion is within the key scope of active system encryption.\n\nBefore you can mount this partition in this mode, you need to either boot an operating system installed on a different drive (encrypted or unencrypted) or boot an unencrypted operating system.</entry>
<entrylang="en"key="CANT_DECRYPT_PARTITION_ON_ENTIRELY_ENCRYPTED_SYS_DRIVE">VeraCrypt cannot decrypt an individual partition on an entirely encrypted system drive (you can decrypt only the entire system drive).</entry>
<entrylang="en"key="CANT_DECRYPT_PARTITION_ON_ENTIRELY_ENCRYPTED_SYS_DRIVE_UNSURE">Warning: As the drive contains the VeraCrypt Boot Loader, it may be an entirely encrypted system drive. If it is, please note that VeraCrypt cannot decrypt an individual partition on an entirely encrypted system drive (you can decrypt only the entire system drive). If that is the case, you will be able to continue now but you will receive the 'Incorrect password' error message later.</entry>
<entrylang="sl"key="PREV"><&Nazaj</entry>
<entrylang="en"key="RAWDEVICES">Unable to list raw devices installed on your system!</entry>
<entrylang="en"key="READONLYPROMPT">The volume '%s' exists, and is read-only. Are you sure you want to replace it?</entry>
<entrylang="en"key="SELECT_KEYFILE_PATH">Select a keyfile search path. WARNING: Note that only the path will be remembered, not the filenames!</entry>
<entrylang="en"key="SELECT_KEYFILE_GENERATION_DIRECTORY">Select a directory where to store the keyfiles.</entry>
<entrylang="en"key="SELECTED_KEYFILE_IS_CONTAINER_FILE">The current container file was selected as a keyfile. It will be skipped.</entry>
<entrylang="sl"key="SERPENT_HELP">Zasnoval ga je Ross Anderson, Eli Biham in Lars Knudsen. Objavljen je bil leta 1998. Uporablja 256-bitni ključ in 128-bitni blok. Način delovanja je XTS. Serpent je bil eden izmed AES-ovih finalistov.</entry>
<entrylang="en"key="SIZE_HELP">Please specify the size of the container you want to create.\n\nIf you create a dynamic (sparse-file) container, this parameter will specify its maximum possible size.\n\nNote that the minimum possible size of a FAT volume is 292 KB. The minimum possible size of an NTFS volume is 3792 KB.</entry>
<entrylang="en"key="SIZE_HELP_HIDDEN_HOST_VOL">Please specify the size of the outer volume to be created (you will first create the outer volume and then a hidden volume within it). The minimum possible size of a volume within which a hidden volume is intended to be created is 340 KB.</entry>
<entrylang="en"key="SIZE_HELP_HIDDEN_VOL">Please specify the size of the hidden volume to create. The minimum possible size of a hidden volume is 40 KB (or 3664 KB if it is formatted as NTFS). The maximum possible size you can specify for the hidden volume is displayed above.</entry>
<entrylang="sl"key="SIZE_PARTITION_HELP">Prosim, da potrdite da je velikost izbrane naprave/razdelka, navedene-ga zgoraj, pravilna in nato kliknite Naprej.</entry>
<entrylang="en"key="SIZE_PARTITION_HIDDEN_SYSENC_HELP">The outer volume and the hidden volume (containing the hidden operating system) will reside within the above partition. It should be the first partition behind the system partition.\n\nPlease verify that the size of the partition and its number shown above are correct, and if they are, click Next.</entry>
<entrylang="en"key="SIZE_PARTITION_HIDDEN_VOL_HELP">\n\nNote that the minimum possible size of a volume within which a hidden volume is intended to be created is 340 KB.</entry>
<entrylang="en"key="TESTS_PASSED">Self-tests of all algorithms passed</entry>
<entrylang="en"key="TEST_INCORRECT_TEST_DATA_UNIT_SIZE">The data unit number that you supplied is too long or short.</entry>
<entrylang="en"key="TEST_INCORRECT_SECONDARY_KEY_SIZE">The secondary key that you supplied is too long or short.</entry>
<entrylang="en"key="TEST_CIPHERTEXT_SIZE">The test ciphertext you have supplied is too long or short.</entry>
<entrylang="en"key="TEST_KEY_SIZE">The test key you have supplied is too long or short.</entry>
<entrylang="en"key="TEST_PLAINTEXT_SIZE">The test plaintext you have supplied is too long or short.</entry>
<entrylang="sl"key="TWO_LAYER_CASCADE_HELP">Dve šifri, ki se izvajata kaskadno v XTS načinu. Vsak blok je prvo šifriran z %s (%d-bitni ključ) in nato z %s (%d-bitni ključ). Vsaka šifra uporablja svoj ključ. Vsi ključi so si med seboj neodvisni.</entry>
<entrylang="sl"key="THREE_LAYER_CASCADE_HELP">Tri šifre, ki se izvajajo kaskadno v XTS načinu. Vsak blok je prvo šifriran z %s (%d-bitni ključ), zatem z %s (%d-bitni ključ) in končno z %s (%d-bitni ključ). Vsaka šifra uporablja svoj ključ. Vsi ključi so si med seboj neodvisni.</entry>
<entrylang="en"key="AUTORUN_MAY_NOT_ALWAYS_WORK">Note that, depending on the operating system configuration, these auto-run and auto-mount features may work only when the traveler disk files are created on a non-writable CD/DVD-like medium. Also note that this is not a bug in VeraCrypt (it is a limitation of Windows).</entry>
<entrylang="en"key="TRAVELER_DISK_CREATED">VeraCrypt traveler disk has been successfully created.\n\nNote that you need administrator privileges to run VeraCrypt in portable mode. Also note that, after examining the registry file, it may be possible to tell that VeraCrypt was run on a Windows system even if it is run in portable mode.</entry>
<entrylang="sl"key="TWOFISH_HELP">Zasnoval ga je Bruce Schneier, John Kelsey, Doug Whiting, David Wagner, Chris Hall in Niels Ferguson. Objavljen je bil leta 1998. Uporablja 256-bitni ključ in 128-bitni blok. Način delovanja je XTS. Twofish je bil eden izmed AES-ovih finalistov.</entry>
<entrylang="sl"key="MORE_INFO_ABOUT">Več informacij o %s</entry>
<entrylang="en"key="UNKNOWN">Unknown</entry>
<entrylang="en"key="ERR_UNKNOWN">An unspecified or unknown error occurred (%d).</entry>
<entrylang="en"key="UNMOUNTALL_LOCK_FAILED">Some volumes contain files or folders being used by applications or system.\n\nForce dismount?</entry>
<entrylang="sl"key="UNMOUNT_LOCK_FAILED">Zbirnik vsebuje datoteke ali mape, ki so trenutno v uporabi drugega programa ali sistema.\n\nNaj odklopim na silo ?</entry>
<entrylang="en"key="NO_VOLUME_MOUNTED_TO_DRIVE">No volume is mounted to the specified drive letter.</entry>
<entrylang="en"key="VOL_ALREADY_MOUNTED">The volume you are trying to mount is already mounted. </entry>
<entrylang="en"key="VOL_MOUNT_FAILED">An error occurred when attempting to mount volume.</entry>
<entrylang="en"key="VOL_SEEKING">Error seeking location within volume.</entry>
<entrylang="en"key="WARN_QUICK_FORMAT">WARNING: You should use Quick Format only in the following cases:\n\n1) The device contains no sensitive data and you do not need plausible deniability.\n2) The device has already been securely and fully encrypted.\n\nAre you sure you want to use Quick Format?</entry>
<entrylang="en"key="CONFIRM_SPARSE_FILE">Dynamic container is a pre-allocated NTFS sparse file whose physical size (actual disk space used) grows as new data is added to it.\n\nWARNING: Performance of sparse-file-hosted volumes is significantly worse than performance of regular volumes. Sparse-file-hosted volumes are also less secure, because it is possible to tell which volume sectors are unused. Furthermore, sparse-file-hosted volumes cannot provide plausible deniability (host a hidden volume). Also note that if data is written to a sparse file container when there is not enough free space in the host file system, the encrypted file system may get corrupted.\n\nAre you sure you want to create a sparse-file-hosted volume?</entry>
<entrylang="en"key="SPARSE_FILE_SIZE_NOTE">Note that the size of the dynamic container reported by Windows and by VeraCrypt will always be equal to its maximum size. To find out current physical size of the container (actual disk space it uses), right-click the container file (in a Windows Explorer window, not in VeraCrypt), then select 'Properties' and see the 'Size on disk' value.\n\nAlso note that if you move a dynamic container to another volume or drive, the physical size of the container will be extended to the maximum. (You can prevent that by creating a new dynamic container in the destination location, mounting it and then moving the files from the old container to the new one.)</entry>
<entrylang="en"key="PASSWORD_CACHE_WIPED">Passwords (and/or processed keyfile contents) stored in the VeraCrypt driver cache have been wiped.</entry>
<entrylang="en"key="WRONG_VOL_TYPE">VeraCrypt cannot change the password for a foreign volume.</entry>
<entrylang="sl"key="SELECT_FREE_DRIVE">Prosim, da izberete prost pogon iz seznama.</entry>
<entrylang="en"key="SELECT_A_MOUNTED_VOLUME">Please select a mounted volume in the drive letter list.</entry>
<entrylang="en"key="AMBIGUOUS_VOL_SELECTION">Warning: Two different volumes/devices are currently selected (the first is selected in the drive letter list and the second is selected in the input field below the drive letter list).\n\nPlease confirm your choice:</entry>
<entrylang="en"key="ERR_KEYFILE_PATH_EMPTY">The keyfile path contains no files.\n\nPlease note that folders (and files they contain) found in keyfile search paths are ignored.</entry>
<entrylang="en"key="UNSUPPORTED_OS">VeraCrypt does not support this operating system.</entry>
<entrylang="en"key="UNSUPPORTED_BETA_OS">Error: VeraCrypt supports only stable versions of this operating system (beta/RC versions are not supported).</entry>
<entrylang="en"key="ERR_PERF_COUNTER">Error: Could not retrieve value of performance counter.</entry>
<entrylang="en"key="ERR_VOL_FORMAT_BAD">Error: Bad volume format.</entry>
<entrylang="en"key="ERR_HIDDEN_NOT_NORMAL_VOLUME">Error: You supplied a password for a hidden volume (not for a normal volume).</entry>
<entrylang="en"key="ERR_HIDDEN_VOL_HOST_ENCRYPTED_INPLACE">For security reasons, a hidden volume cannot be created within a VeraCrypt volume containing a filesystem that has been encrypted in place (because the free space on the volume has not been filled with random data).</entry>
<entrylang="en"key="FORMAT_NTFS_FAILED">Windows failed to format the volume as NTFS.\n\nPlease select a different type of file system (if possible) and try again. Alternatively, you could leave the volume unformatted (select 'None' as the filesystem), exit this wizard, mount the volume, and then use either a system or a third-party tool to format the mounted volume (the volume will remain encrypted).</entry>
<entrylang="en"key="FORMAT_NTFS_FAILED_ASK_FAT">Windows failed to format the volume as NTFS.\n\nDo you want to format the volume as FAT instead?</entry>
<entrylang="en"key="CLUSTER_TOO_SMALL">The selected cluster size is too small for this volume size. A greater cluster size will be used instead.</entry>
<entrylang="en"key="CANT_GET_VOLSIZE">Error: Cannot get volume size!\n\nMake sure the selected volume is not being used by the system or an application.</entry>
<entrylang="en"key="HIDDEN_VOL_HOST_SPARSE">Hidden volumes must not be created within dynamic (sparse file) containers. To achieve plausible deniability, the hidden volume needs to be created within a non-dynamic container.</entry>
<entrylang="en"key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS">The VeraCrypt Volume Creation Wizard can create a hidden volume only within a FAT or NTFS volume.</entry>
<entrylang="en"key="HIDDEN_VOL_HOST_UNSUPPORTED_FILESYS_WIN2000">Under Windows 2000, the VeraCrypt Volume Creation Wizard can create a hidden volume only within a FAT volume.</entry>
<entrylang="en"key="HIDDEN_VOL_HOST_NTFS">Note: The FAT file system is more suitable for outer volumes than the NTFS file system (for example, the maximum possible size of the hidden volume would very likely have been significantly greater if the outer volume had been formatted as FAT).</entry>
<entrylang="sl"key="HIDDEN_VOL_HOST_NTFS_ASK">Zabeležite si, da je FAT datotečni sistem bolj primeren za zunanje zbirnike kot NTFS datotečni sistem. Kot primer, največja možna velikost zunanjega zbirnika bo zelo verjetno znatno večja, če bo zunanji zbirnik formatiran kot FAT (razlog za to je, da NTFS datotečni sistem vedno shranjuje notranje podatke točno na sredini zbirnika, torej skriti zbirnik se lahko nahaja samo v drugi polovici zunanjega zbirnika).\n\nSte prepričani, da želite zunanji zbirnik formatirati kot NTFS?</entry>
<entrylang="en"key="OFFER_FAT_FORMAT_ALTERNATIVE">Do you want to format the volume as FAT instead?</entry>
<entrylang="en"key="FAT_NOT_AVAILABLE_FOR_SO_LARGE_VOLUME">Note: This volume cannot be formatted as FAT, because it exceeds the maximum volume size supported by the FAT32 filesystem for the applicable sector size (2 TB for 512-byte sectors and 16 TB for 4096-byte sectors).</entry>
<entrylang="en"key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed).</entry>
<entrylang="en"key="PARTITION_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: The partition for the hidden operating system (i.e. the first partition behind the system partition) must be at least 110% (2.1 times) larger than the system partition (the system partition is the one where the currently running operating system is installed). The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the partition.</entry>
<entrylang="en"key="OUTER_VOLUME_TOO_SMALL_FOR_HIDDEN_OS_NTFS">Error: If the outer volume is formatted as NTFS, it must be at least 110% (2.1 times) larger than the system partition. The reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume (which is to contain a clone of the system partition) can reside only in the second half of the outer volume.\n\nNote: The outer volume needs to reside within the same partition as the hidden operating system (i.e. within the first partition behind the system partition).</entry>
<entrylang="en"key="NO_PARTITION_FOLLOWS_BOOT_PARTITION">Error: There is no partition behind the system partition.\n\nNote that before you can create a hidden operating system, you need to create a partition for it on the system drive. It must be the first partition behind the system partition and it must be at least 5% larger than the system partition (the system partition is the one where the currently running operating system is installed). However, if the outer volume (not to be confused with the system partition) is formatted as NTFS, the partition for the hidden operating system must be at least 110% (2.1 times) larger than the system partition (the reason is that the NTFS file system always stores internal data exactly in the middle of the volume and, therefore, the hidden volume, which is to contain a clone of the system partition, can reside only in the second half of the partition).</entry>
<entrylang="en"key="TWO_SYSTEMS_IN_ONE_PARTITION_REMARK">Remark: It is not practical (and therefore is not supported) to install operating systems in two VeraCrypt volumes that are embedded within a single partition, because using the outer operating system would often require data to be written to the area of the hidden operating system (and if such write operations were prevented using the hidden volume protection feature, it would inherently cause system crashes, i.e. 'Blue Screen' errors).</entry>
<entrylang="en"key="FOR_MORE_INFO_ON_PARTITIONS">For information on how to create and manage partitions, please refer to the documentation supplied with your operating system or contact your computer vendor's technical support team for assistance.</entry>
<entrylang="en"key="SYSTEM_PARTITION_NOT_ACTIVE">Error: The currently running operating system is not installed on the boot partition (first Active partition). This is not supported.</entry>
<entrylang="en"key="CONFIRM_FAT_FOR_FILES_OVER_4GB">You indicated that you intend to store files larger than 4 GB in this VeraCrypt volume. However, you chose the FAT file system, on which files larger than 4 GB cannot be stored.\n\nAre you sure you want to format the volume as FAT?</entry>
<entrylang="en"key="NONSYS_INPLACE_DECRYPTION_BAD_VOL_FORMAT">Error: VeraCrypt does not support in-place decryption of legacy non-system volumes created by VeraCrypt 1.0b or earlier.\n\nNote: You can still decrypt files stored on the volume by copying/moving them to any unencrypted volume.</entry>
<entrylang="en"key="NONSYS_INPLACE_DECRYPTION_CANT_DECRYPT_HID_VOL">Error: VeraCrypt cannot in-place decrypt a hidden VeraCrypt volume.\n\nNote: You can still decrypt files stored on the volume by copying/moving them to any unencrypted volume.</entry>
<entrylang="en"key="CONFIRM_VOL_CONTAINS_NO_HIDDEN_VOL">Warning: Note that VeraCrypt cannot in-place decrypt a volume that contains a hidden VeraCrypt volume (the hidden volume would be overwritten with pseudorandom data).\n\nPlease confirm that the volume you are about to decrypt contains no hidden volume.\n\nNote: If the volume contains a hidden volume but you do not mind losing the hidden volume, you can select Proceed (the outer volume will be safely decrypted).</entry>
<entrylang="en"key="VOL_CONTAINS_NO_HIDDEN_VOL">The volume does not contain any hidden volume. Proceed.</entry>
<entrylang="en"key="VOL_CONTAINS_A_HIDDEN_VOL">The volume contains a hidden volume. Cancel.</entry>
<entrylang="en"key="CANT_ACCESS_VOL">Error: Cannot access the volume!\n\nMake sure that the selected volume exists, that it is not mounted or being used by the system or an application, that you have read/write permission for the volume, and that it is not write-protected.</entry>
<entrylang="en"key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL">Error: Cannot access the volume and/or obtain information about the volume.\n\nMake sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.</entry>
<entrylang="en"key="INPLACE_ENC_CANT_ACCESS_OR_GET_INFO_ON_VOL_ALT">Error: Cannot access the volume and/or obtain information about the volume. Make sure that the selected volume exists, that it is not being used by the system or applications, that you have read/write permission for the volume, and that it is not write-protected.\n\nIf the problem persists, it might help to follow the below steps.</entry>
<entrylang="en"key="INPLACE_ENC_GENERIC_ERR_ALT_STEPS">An error prevented VeraCrypt from encrypting the partition. Please try fixing any previously reported problems and then try again. If the problems persist, it might help to follow the below steps.</entry>
<entrylang="en"key="INPLACE_ENC_GENERIC_ERR_RESUME">An error prevented VeraCrypt from resuming the process of encryption of the partition.\n\nPlease try fixing any previously reported problems and then try resuming the process again. Note that the volume cannot be mounted until it has been fully encrypted.</entry>
<entrylang="en"key="INPLACE_DEC_GENERIC_ERR">An error prevented VeraCrypt from decrypting the volume. Please try fixing any previously reported problems and then try again if possible.</entry>
<entrylang="en"key="CANT_DISMOUNT_OUTER_VOL">Error: Cannot dismount the outer volume!\n\nVolume cannot be dismounted if it contains files or folders being used by a program or the system.\n\nPlease close any program that might be using files or directories on the volume and click Retry.</entry>
<entrylang="en"key="CANT_GET_OUTER_VOL_INFO">Error: Cannot obtain information about the outer volume!\nVolume creation cannot continue.</entry>
<entrylang="en"key="CANT_ACCESS_OUTER_VOL">Error: Cannot access the outer volume! Volume creation cannot continue.</entry>
<entrylang="en"key="CANT_MOUNT_OUTER_VOL">Error: Cannot mount the outer volume! Volume creation cannot continue.</entry>
<entrylang="en"key="CANT_GET_CLUSTER_BITMAP">Error: Cannot get volume cluster bitmap! Volume creation cannot continue.</entry>
<entrylang="en"key="SETUP_MODE_INFO">Select one of the modes. If you are not sure which to select, use the default mode.</entry>
<entrylang="en"key="SETUP_MODE_HELP_INSTALL">Select this option if you want to install VeraCrypt on this system.</entry>
<entrylang="en"key="SETUP_MODE_HELP_UPGRADE">Note: You can upgrade without decrypting even if the system partition/drive is encrypted or you use a hidden operating system.</entry>
<entrylang="en"key="SETUP_MODE_HELP_EXTRACT">If you select this option, all files will be extracted from this package but nothing will be installed on the system. Do not select it if you intend to encrypt the system partition or system drive. Selecting this option can be useful, for example, if you want to run VeraCrypt in so-called portable mode. VeraCrypt does not have to be installed on the operating system under which it is run. After all files are extracted, you can directly run the extracted file 'VeraCrypt.exe' (then VeraCrypt will run in portable mode).</entry>
<entrylang="en"key="EXTRACTION_FINISHED_INFO">All files have been successfully extracted to the destination location.</entry>
<entrylang="en"key="AUTO_FOLDER_CREATION">If the specified folder does not exist, it will be automatically created.</entry>
<entrylang="en"key="SETUP_UPGRADE_DESTINATION">The VeraCrypt program files will be upgraded in the location where VeraCrypt is installed. If you need to select a different location, please uninstall VeraCrypt first.</entry>
<entrylang="en"key="AFTER_UPGRADE_RELEASE_NOTES">Do you want to view release notes for the current (latest stable) version of VeraCrypt?</entry>
<entrylang="en"key="AFTER_INSTALL_TUTORIAL">If you have never used VeraCrypt before, we recommend that you read the chapter Beginner's Tutorial in the VeraCrypt User Guide. Do you want to view the tutorial?</entry>
<entrylang="en"key="SELECT_AN_ACTION">Please select an action to perform from the following:</entry>
<entrylang="en"key="SETUP_ADMIN">To successfully install/uninstall VeraCrypt, you must have administrator privileges. Do you want to continue?</entry>
<entrylang="en"key="TC_INSTALLER_IS_RUNNING">VeraCrypt Installer is currently running on this system and performing or preparing installation or update of VeraCrypt. Before you proceed, please wait for it to finish or close it. If you cannot close it, please restart your computer before proceeding.</entry>
<entrylang="en"key="DIST_PACKAGE_CORRUPTED">This distribution package is damaged. Please try downloading it again (preferably from the official VeraCrypt website at https://www.veracrypt.fr).</entry>
<entrylang="en"key="ROLLBACK">The installation has been rolled back.</entry>
<entrylang="en"key="INSTALL_OK">VeraCrypt has been successfully installed.</entry>
<entrylang="en"key="SETUP_UPDATE_OK">VeraCrypt has been successfully updated.</entry>
<entrylang="en"key="UPGRADE_OK_REBOOT_REQUIRED">VeraCrypt has been successfully upgraded. However, before you can start using it, the computer must be restarted.\n\nDo you want to restart it now?</entry>
<entrylang="en"key="SYS_ENC_UPGRADE_FAILED">Failed to upgrade VeraCrypt!\n\nIMPORTANT: Before you shut down or restart the system, we strongly recommend that you use System Restore (Windows Start menu > All programs > Accessories > System Tools > System Restore) to restore your system to the restore point named 'VeraCrypt installation'. If System Restore is not available, you should try installing the original or the new version of VeraCrypt again before you shut down or restart the system.</entry>
<entrylang="en"key="UNINSTALL_OK">VeraCrypt has been successfully uninstalled.\n\nClick 'Finish' to remove the VeraCrypt installer and the folder %s. Note that the folder will not be removed if it contains any files that were not installed by the VeraCrypt installer or created by VeraCrypt.</entry>
<entrylang="en"key="CANT_CREATE_FOLDER">The folder '%s' could not be created</entry>
<entrylang="en"key="CLOSE_TC_FIRST">The VeraCrypt device driver cannot be unloaded.\n\nPlease close all open VeraCrypt windows first. If it does not help, please restart Windows and then try again.</entry>
<entrylang="en"key="DISMOUNT_ALL_FIRST">All VeraCrypt volumes must be dismounted before installing or uninstalling VeraCrypt.</entry>
<entrylang="en"key="UNINSTALL_OLD_VERSION_FIRST">An obsolete version of VeraCrypt is currently installed on this system. It needs to be uninstalled before you can install this new version of VeraCrypt.\n\nAs soon as you close this message box, the uninstaller of the old version will be launched. Note that no volume will be decrypted when you uninstall VeraCrypt. After you uninstall the old version of VeraCrypt, run the installer of the new version of VeraCrypt again.</entry>
<entrylang="en"key="REG_INSTALL_FAILED">The installation of the registry entries has failed</entry>
<entrylang="en"key="DRIVER_INSTALL_FAILED">The installation of the device driver has failed. Please restart Windows and then try installing VeraCrypt again.</entry>
<entrylang="en"key="DRIVER_UINSTALL_FAILED">Uninstallation of the device driver has failed. Please note that, due to a Windows issue, it may be necessary to log off or restart the system before the device driver can be uninstalled (or reinstalled).</entry>
<entrylang="en"key="COM_REG_FAILED">Registration of the User Account Control support library failed.</entry>
<entrylang="en"key="COM_DEREG_FAILED">Unregistration of the User Account Control support library failed.</entry>
<entrylang="en"key="TRAVELER_LIMITATIONS_NOTE">Note about portable mode:\n\nPlease note that the operating system requires drivers to be registered with it before they can be started. Hence, the VeraCrypt driver is not (and cannot be) fully portable (whereas the VeraCrypt applications are fully portable, i.e. they do not have to be installed or registered with the operating system). Also note that VeraCrypt needs a driver to provide transparent on-the-fly encryption/decryption.</entry>
<entrylang="en"key="TRAVELER_UAC_NOTE">Note that if you decide to run VeraCrypt in portable mode (as opposed to running an installed copy of VeraCrypt), the system will ask you for permission to run VeraCrypt (UAC prompt) every time you attempt to run it.\n\nThe reason is that when you run VeraCrypt in portable mode, VeraCrypt needs to load and start the VeraCrypt device driver. VeraCrypt needs a device driver to provide transparent on-the-fly encryption/decryption, and users without administrator privileges cannot start device drivers in Windows. Therefore, the system will ask you for permission to run VeraCrypt with administrator privileges (UAC prompt).\n\nNote that if you install VeraCrypt on the system (as opposed to running VeraCrypt in portable mode), the system will NOT ask you for permission to run VeraCrypt (UAC prompt) every time you attempt to run it.\n\nAre you sure you want to extract the files?</entry>
<entrylang="en"key="CONTAINER_ADMIN_WARNING">Warning: This instance of the Volume Creation Wizard has administrator privileges.\n\nYour new volume may be created with permissions that will not allow you to write to the volume when it is mounted. If you want to avoid that, close this instance of the Volume Creation Wizard and launch a new one without administrator privileges.\n\nDo you want to close this instance of the Volume Creation Wizard?</entry>
<entrylang="en"key="SYS_FAVORITE_VOLUMES_SAVED">System favorite volumes saved.\n\nTo enable mounting of system favorite volumes when the system starts, please select 'Settings' > 'System Favorite Volumes' > 'Mount system favorite volumes when Windows starts'.</entry>
<entrylang="en"key="FAVORITE_ADD_DRIVE_DEV_WARNING">The volume you are adding to favorites is neither a partition nor a dynamic volume. Therefore, VeraCrypt will be unable to mount this favorite volume if the device number changes.</entry>
<entrylang="en"key="FAVORITE_ADD_PARTITION_TYPE_WARNING">The volume you are adding to favorites is a partition not recognized by Windows.\n\nVeraCrypt will be unable to mount this favorite volume if the device number changes. Please set the type of the partition to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then add the partition to favorites again.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_BACKGROUND_TASK_ERR">VeraCrypt Background Task is disabled or it is configured to exit when there are no mounted volumes (or VeraCrypt is running in portable mode). This may prevent your favorite volumes from being automatically mounted when devices hosting them get connected.\n\nNote: To enable the VeraCrypt Background Task, select Settings > Preferences and check the 'Enabled' checkbox in the section 'VeraCrypt Background Task'.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_NETWORK_PATH_ERR">A container stored in a remote filesystem shared over a network cannot be automatically mounted when its host device gets connected.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, the volume hosted on the device cannot be automatically mounted when the device gets connected.</entry>
<entrylang="en"key="FAVORITE_ARRIVAL_MOUNT_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable the volume hosted on the device to be automatically mounted when the device gets connected.</entry>
<entrylang="en"key="FAVORITE_LABEL_DEVICE_PATH_ERR">The device displayed below is neither a partition nor a dynamic volume. Therefore, no label can be assigned to it.</entry>
<entrylang="en"key="FAVORITE_LABEL_PARTITION_TYPE_ERR">Please set the type of the partition displayed below to a type recognized by Windows (use the SETID command of the Windows 'diskpart' tool). Then remove the partition from favorites and add it again. This will enable VeraCrypt to assign a label to the partition.</entry>
<entrylang="en"key="SYSTEM_FAVORITE_NETWORK_PATH_ERR">Due to a Windows limitation, a container stored in a remote filesystem shared over a network cannot be mounted as a system favorite volume (however, it can be mounted as a non-system favorite volume when a user logs on).</entry>
<entrylang="sl"key="ENTER_PASSWORD_FOR">Vnesite geslo za %s</entry>
<entrylang="en"key="ENTER_PASSWORD_FOR_LABEL">Enter password for '%s'</entry>
<entrylang="en"key="ENTER_NORMAL_VOL_PASSWORD">Enter password for the normal/outer volume</entry>
<entrylang="en"key="ENTER_HIDDEN_VOL_PASSWORD">Enter password for the hidden volume</entry>
<entrylang="en"key="ENTER_HEADER_BACKUP_PASSWORD">Enter password for the header stored in backup file</entry>
<entrylang="en"key="KEYFILE_CREATED">Keyfile has been successfully created.</entry>
<entrylang="en"key="KEYFILE_INCORRECT_NUMBER">The number of keyfiles you supplied is invalid.</entry>
<entrylang="en"key="KEYFILE_EMPTY_BASE_NAME">Please enter a name for the keyfile(s) to be generated</entry>
<entrylang="en"key="KEYFILE_INVALID_BASE_NAME">The base name of the keyfile(s) is invalid</entry>
<entrylang="en"key="KEYFILE_ALREADY_EXISTS">The keyfile '%s' already exists.\nDo you want to overwrite it? The generation process will be stopped if you answer No.</entry>
<entrylang="en"key="HEADER_DAMAGED_AUTO_USED_HEADER_BAK">WARNING: The header of this volume is damaged! VeraCrypt automatically used the backup of the volume header embedded in the volume.\n\nYou should repair the volume header by selecting 'Tools' > 'Restore Volume Header'.</entry>
<entrylang="en"key="VOL_HEADER_BACKED_UP">Volume header backup has been successfully created.\n\nIMPORTANT: Restoring the volume header using this backup will also restore the current volume password. Moreover, if keyfile(s) are/is necessary to mount the volume, the same keyfile(s) will be necessary to mount the volume again when the volume header is restored.\n\nWARNING: This volume header backup may be used to restore the header ONLY of this particular volume. If you use this header backup to restore a header of a different volume, you will be able to mount the volume, but you will NOT be able to decrypt any data stored in the volume (because you will change its master key).</entry>
<entrylang="en"key="VOL_HEADER_RESTORED">The volume header has been successfully restored.\n\nIMPORTANT: Please note that an old password may have been restored as well. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) are now necessary to mount the volume again.</entry>
<entrylang="en"key="EXTERNAL_VOL_HEADER_BAK_FIRST_INFO">For security reasons, you will have to enter the correct password (and/or supply the correct keyfiles) for the volume.\n\nNote: If the volume contains a hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the outer volume first. Afterwards, if you choose to back up the header of the hidden volume, you will have to enter the correct password (and/or supply the correct keyfiles) for the hidden volume.</entry>
<entrylang="en"key="CONFIRM_VOL_HEADER_BAK">Are you sure you want to create volume header backup for %s?\n\nAfter you click Yes, you will prompted for a filename for the header backup.\n\nNote: Both the standard and the hidden volume headers will be re-encrypted using a new salt and stored in the backup file. If there is no hidden volume within this volume, the area reserved for the hidden volume header in the backup file will be filled with random data (to preserve plausible deniability). When restoring a volume header from the backup file, you will need to enter the correct password (and/or to supply the correct keyfiles) that was/were valid when the volume header backup was created. The password (and/or keyfiles) will also automatically determine the type of the volume header to restore, i.e. standard or hidden (note that VeraCrypt determines the type through the process of trial and error).</entry>
<entrylang="en"key="CONFIRM_VOL_HEADER_RESTORE">Are you sure you want to restore volume header of %s?\n\nWARNING: Restoring a volume header also restores the volume password that was valid when the backup was created. Moreover, if keyfile(s) were/was necessary to mount the volume when the backup was created, the same keyfile(s) will be necessary to mount the volume again after the volume header is restored.\n\nAfter you click Yes, you will select the header backup file.</entry>
<entrylang="en"key="DOES_VOLUME_CONTAIN_HIDDEN">Does the volume contain a hidden volume?</entry>
<entrylang="en"key="VOLUME_CONTAINS_HIDDEN">The volume contains a hidden volume</entry>
<entrylang="en"key="VOLUME_DOES_NOT_CONTAIN_HIDDEN">The volume does not contain a hidden volume</entry>
<entrylang="en"key="HEADER_RESTORE_EXTERNAL_INTERNAL">Please select the type of volume header backup you want to use:</entry>
<entrylang="en"key="HEADER_RESTORE_INTERNAL">Restore the volume header from the backup embedded in the volume</entry>
<entrylang="en"key="HEADER_RESTORE_EXTERNAL">Restore the volume header from an external backup file</entry>
<entrylang="en"key="HEADER_BACKUP_SIZE_INCORRECT">The size of the volume header backup file is incorrect.</entry>
<entrylang="en"key="VOLUME_HAS_NO_BACKUP_HEADER">There is no backup header embedded in this volume (note that only volumes created by TrueCrypt 6.0 or later contain embedded backup headers).</entry>
<entrylang="en"key="BACKUP_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to back up the header of the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</entry>
<entrylang="en"key="RESTORE_HEADER_NOT_FOR_SYS_DEVICE">You are attempting to restore the header of a virtual VeraCrypt volume but you selected the system partition/drive. This is not allowed. Backup/restore operations pertaining to the system partition/drive can be performed only using the VeraCrypt Rescue Disk.\n\nDo you want to create a VeraCrypt Rescue Disk?</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CREATION_SELECT_PATH">After you click OK, you will select a filename for the new VeraCrypt Rescue Disk image and the location where you wish to place it.</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CREATION_BURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nIMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software.\n\nAfter you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CREATION_WIN_ISOBURN">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn the Rescue Disk image to a CD or DVD.\n\nDo you want to launch the Microsoft Windows Disc Image Burner now?\n\nNote: After you burn the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly burned.</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CHECK_INSERT">Please insert your VeraCrypt Rescue Disk and click OK to verify it.</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CHECK_PASSED">The VeraCrypt Rescue Disk has been successfully verified.</entry>
<entrylang="en"key="RESCUE_DISK_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then try again. If this does not help, please try other CD/DVD recording software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="RESCUE_DISK_ISO_IMAGE_CHECK_PASSED">The VeraCrypt Rescue Disk image has been successfully verified.</entry>
<entrylang="en"key="RESCUE_DISK_ISO_IMAGE_CHECK_FAILED">The Rescue Disk image verification failed.\n\nIf you attempted to verify a VeraCrypt Rescue Disk image created for a different master key, password, salt, etc., please note that such Rescue Disk image will always fail this verification. To create a new Rescue Disk image fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="CANNOT_CREATE_RESCUE_DISK_ON_HIDDEN_OS">VeraCrypt Rescue Disk cannot be created when a hidden operating system is running.\n\nTo create a VeraCrypt Rescue Disk, boot the decoy operating system and then select 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="RESCUE_DISK_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly burned.\n\nIf you have burned the Rescue Disk, please eject and reinsert the CD/DVD; then click Next to try again. If this does not help, please try another medium%s.\n\nIf you have not burned the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to burn the newly generated Rescue Disk.</entry>
<entrylang="en"key="RESCUE_DISK_CHECK_FAILED_SENTENCE_APPENDIX"> and/or other CD/DVD recording software</entry>
<entrylang="en"key="SYSTEM_FAVORITES_DLG_TITLE">VeraCrypt - System Favorite Volumes</entry>
<entrylang="en"key="SYS_FAVORITES_HELP_LINK">What are system favorite volumes?</entry>
<entrylang="en"key="SYS_FAVORITES_REQUIRE_PBA">The system partition/drive does not appear to be encrypted.\n\nSystem favorite volumes can be mounted using only a pre-boot authentication password. Therefore, to enable use of system favorite volumes, you need to encrypt the system partition/drive first.</entry>
<entrylang="sl"key="DISMOUNT_FIRST">Prosim, da prvo odklopite zbirnik preden nadaljujete.</entry>
<entrylang="en"key="CANNOT_SET_TIMER">Error: Cannot set timer.</entry>
<entrylang="sl"key="UNSUPPORTED_CHARS_IN_PWD">Napaka: Geslo mora vsebovati samo ASCII znake.\n\nZnaki, ki niso ASCII narave in so vsebovani v geslu lahko povzročijo, da bo zbirnik nemogoče priklopiti, ko se bodo spremenile Vaše sistemske nastavitve.\n\nSledeči znaki so dovoljeni:\n\n ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \\ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~</entry>
<entrylang="en"key="UNSUPPORTED_CHARS_IN_PWD_RECOM">Warning: Password contains non-ASCII characters. This may cause the volume to be impossible to mount when your system configuration changes.\n\nYou should replace all non-ASCII characters in the password with ASCII characters. To do so, click 'Volumes' -> 'Change Volume Password'.\n\nThe following are ASCII characters:\n\n ! " # $ % & ' ( ) * + , - . / 0 1 2 3 4 5 6 7 8 9 : ; < = > ? @ A B C D E F G H I J K L M N O P Q R S T U V W X Y Z [ \\ ] ^ _ ` a b c d e f g h i j k l m n o p q r s t u v w x y z { | } ~</entry>
<entrylang="en"key="EXE_FILE_EXTENSION_CONFIRM">WARNING: We strongly recommend that you avoid file extensions that are used for executable files (such as .exe, .sys, or .dll) and other similarly problematic file extensions. Using such file extensions causes Windows and antivirus software to interfere with the container, which adversely affects the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension or change it (e.g., to '.hc').\n\nAre you sure you want to use the problematic file extension?</entry>
<entrylang="en"key="EXE_FILE_EXTENSION_MOUNT_WARNING">WARNING: This container has a file extension that is used for executable files (such as .exe, .sys, or .dll) or some other file extension that is similarly problematic. It will very likely cause Windows and antivirus software to interfere with the container, which will adversely affect the performance of the volume and may also cause other serious problems.\n\nWe strongly recommend that you remove the file extension of the container or change it (e.g., to '.hc') after you dismount the volume.</entry>
<entrylang="en"key="HOMEPAGE">Homepage</entry>
<entrylang="en"key="LARGE_IDE_WARNING_XP">WARNING: It appears that you have not applied any Service Pack to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows XP to which you did not apply Service Pack 1 or later! If you do, data on the disk (no matter if it is a VeraCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in VeraCrypt.</entry>
<entrylang="en"key="LARGE_IDE_WARNING_2K">WARNING: It appears that you have not applied Service Pack 3 or later to your Windows installation. You should not write to IDE disks larger than 128 GB under Windows 2000 to which you did not apply Service Pack 3 or later! If you do, data on the disk (no matter if it is a VeraCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a bug in VeraCrypt.\n\nNote: You may also need to enable the 48-bit LBA support in the registry; for more information, see http://support.microsoft.com/kb/305098/EN-US</entry>
<entrylang="en"key="LARGE_IDE_WARNING_2K_REGISTRY">WARNING: 48-bit LBA ATAPI support is disabled on your system. Therefore, you should not write to IDE disks larger than 128 GB! If you do, data on the disk (no matter if it is a VeraCrypt volume or not) may get corrupted. Note that this is a limitation of Windows, not a limitation of VeraCrypt.\n\nTo enable the 48-bit LBA support, add the 'EnableBigLba' registry value in the registry key HKEY_LOCAL_MACHINE\\SYSTEM\\CurrentControlSet\\Services\\atapi\\Parameters and set it to 1.\n\nFor more information, see http://support.microsoft.com/kb/305098</entry>
<entrylang="en"key="VOLUME_TOO_LARGE_FOR_FAT32">Error: Files larger than 4 GB cannot be stored on a FAT32 file system. Therefore, file-hosted VeraCrypt volumes (containers) stored on a FAT32 file system cannot be larger than 4 GB.\n\nIf you need a larger volume, create it on an NTFS file system (or, if you use Windows Vista SP1 or later, on an exFAT file system) or, instead of creating a file-hosted volume, encrypt an entire partition or device.</entry>
<entrylang="en"key="VOLUME_TOO_LARGE_FOR_WINXP">Warning: Windows XP does not support files larger than 2048 GB (it will report that "Not enough storage is available"). Therefore, you cannot create a file-hosted VeraCrypt volume (container) larger than 2048 GB under Windows XP.\n\nNote that it is still possible to encrypt the entire drive or create a partition-hosted VeraCrypt volume larger than 2048 GB under Windows XP.</entry>
<entrylang="sl"key="FREE_SPACE_FOR_WRITING_TO_OUTER_VOLUME">OPOZORILO: Če hočete, da bi lahko v prihodnosti dodali več podatkov/datotek v zunanji zbirnik, potem bi morali razmisliti o izbiri manjše velikosti za skriti zbirnik.\n\nAli ste prepričani, da želite nadaljevati z izbrano velikostjo ?</entry>
<entrylang="sl"key="NO_VOLUME_SELECTED">Nobeden zbirnik ni izbran.\n\nKliknite 'Izberi napravo' ali 'Izberi datoteko', da lahko izberete VeraCrypt zbirnik.</entry>
<entrylang="sl"key="NO_SYSENC_PARTITION_SELECTED">Nobeden razdelek ni izbran.\n\nKliknite 'Izberi napravo', da lahko izberete nepriklopljen razdelek, ki običajno zahteva predzagonsko overitev (npr. razdelek, ki se nahaja na šifriranem sistemskem disku drugega operacijskega sistema, ki se ne zaganja ali šifrirani sistemski razdelek drugega operacijskega sistema).\n\nOpomba: Izbrani razdelek bo priklopljen kot običajen VeraCrypt zbirnik brez predzagonske overitve. To je uporabno za, npr. rezervne ali popravljalne postopke.</entry>
<entrylang="en"key="CONFIRM_SAVE_DEFAULT_KEYFILES">WARNING: If default keyfiles are set and enabled, volumes that are not using these keyfiles will be impossible to mount. Therefore, after you enable default keyfiles, keep in mind to uncheck the 'Use keyfiles' checkbox (below a password input field) whenever mounting such volumes.\n\nAre you sure you want to save the selected keyfiles/paths as default?</entry>
<entrylang="sl"key="HK_SHOW_HIDE_MAIN_WINDOW">Pokaži/Skrij glavno okno VeraCrypt-a</entry>
<entrylang="en"key="PRESS_A_KEY_TO_ASSIGN">(Click here and press a key)</entry>
<entrylang="sl"key="ACTION">Ukrep</entry>
<entrylang="sl"key="SHORTCUT">Bližnjica</entry>
<entrylang="en"key="CANNOT_USE_RESERVED_KEY">Error: This shortcut is reserved. Please choose a different shortcut.</entry>
<entrylang="en"key="SHORTCUT_ALREADY_IN_USE">Error: Shortcut already in use.</entry>
<entrylang="en"key="HOTKEY_REGISTRATION_ERROR">WARNING: One or more VeraCrypt system-wide hot keys will not work!\n\nPlease make sure that other applications and the operating system do not use the same shortcut(s) as VeraCrypt.</entry>
<entrylang="en"key="PAGING_FILE_CREATION_PREVENTED">Paging file creation has been prevented.\n\nPlease note that, due to Windows issues, paging files cannot be located on non-system VeraCrypt volumes (including system favorite volumes). VeraCrypt supports creation of paging files only on an encrypted system partition/drive.</entry>
<entrylang="en"key="SYS_ENC_HIBERNATION_PREVENTED">An error or incompatibility prevents VeraCrypt from encrypting the hibernation file. Therefore, hibernation has been prevented.\n\nNote: When a computer hibernates (or enters a power-saving mode), the content of its system memory is written to a hibernation storage file residing on the system drive. VeraCrypt would not be able to prevent encryption keys and the contents of sensitive files opened in RAM from being saved unencrypted to the hibernation storage file.</entry>
<entrylang="en"key="HIDDEN_OS_HIBERNATION_PREVENTED">Hibernation has been prevented.\n\nVeraCrypt does not support hibernation on hidden operating systems that use an extra boot partition. Please note that the boot partition is shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, VeraCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.</entry>
<entrylang="en"key="VOLUME_MOUNTED_AS_DRIVE_LETTER_X_DISMOUNTED">VeraCrypt volume mounted as %c: has been dismounted.</entry>
<entrylang="en"key="MOUNTED_VOLUMES_DISMOUNTED">VeraCrypt volumes have been dismounted.</entry>
<entrylang="en"key="VOLUMES_DISMOUNTED_CACHE_WIPED">VeraCrypt volumes have been dismounted and password cache has been wiped.</entry>
<entrylang="en"key="CONFIRM_BACKGROUND_TASK_DISABLED">WARNING: If the VeraCrypt Background Task is disabled, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n5) Tray icon\n\nNote: You can shut down the Background Task anytime by right-clicking the VeraCrypt tray icon and selecting 'Exit'.\n\nAre you sure you want to permanently disable the VeraCrypt Background Task?</entry>
<entrylang="en"key="CONFIRM_NO_FORCED_AUTODISMOUNT">WARNING: If this option is disabled, volumes containing open files/directories will not be possible to auto-dismount.\n\nAre you sure you want to disable this option?</entry>
<entrylang="en"key="WARN_PREF_AUTO_DISMOUNT">WARNING: Volumes containing open files/directories will NOT be auto-dismounted.\n\nTo prevent this, enable the following option in this dialog window: 'Force auto-dismount even if volume contains open files or directories'</entry>
<entrylang="en"key="WARN_PREF_AUTO_DISMOUNT_ON_POWER">WARNING: When the notebook battery power is low, Windows may omit sending the appropriate messages to running applications when the computer is entering power saving mode. Therefore, VeraCrypt may fail to auto-dismount volumes in such cases.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_RESUME_PROMPT">You have scheduled the process of encryption of a partition/volume. The process has not been completed yet.\n\nDo you want to resume the process now?</entry>
<entrylang="en"key="SYSTEM_ENCRYPTION_RESUME_PROMPT">You have scheduled the process of encryption or decryption of the system partition/drive. The process has not been completed yet.\n\nDo you want to start (resume) the process now?</entry>
<entrylang="en"key="ASK_NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL">Do you want to be prompted about whether you want to resume the currently scheduled processes of encryption of non-system partitions/volumes?</entry>
<entrylang="en"key="DO_NOT_PROMPT_ME">No, do not prompt me</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_NOTIFICATION_REMOVAL_NOTE">IMPORTANT: Keep in mind that you can resume the process of encryption of any non-system partition/volume by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="en"key="SYSTEM_ENCRYPTION_SCHEDULED_BUT_PBA_FAILED">You have scheduled the process of encryption or decryption of the system partition/drive. However, pre-boot authentication failed (or was bypassed).\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by selecting 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="en"key="CONFIRM_EXIT">WARNING: If VeraCrypt exits now, the following functions will be disabled:\n\n1) Hot keys\n2) Auto-dismount (e.g., upon logoff, inadvertent host device removal, time-out, etc.)\n3) Auto-mount of favorite volumes\n4) Notifications (e.g., when damage to hidden volume is prevented)\n\nNote: If you do not wish VeraCrypt to run in the background, disable the VeraCrypt Background Task in the Preferences (and, if necessary, disable the automatic start of VeraCrypt in the Preferences).\n\nAre you sure you want VeraCrypt to exit?</entry>
<entrylang="en"key="CHOOSE_ENCRYPT_OR_DECRYPT">VeraCrypt does not have sufficient information to determine whether to encrypt or decrypt.</entry>
<entrylang="en"key="CHOOSE_ENCRYPT_OR_DECRYPT_FINALIZE_DECRYPT_NOTE">VeraCrypt does not have sufficient information to determine whether to encrypt or decrypt.\n\nNote: If you decrypted the system partition/drive in the pre-boot environment, you may need to finalize the process by clicking Decrypt.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_REVERSE_INFO">Note: When you are encrypting a non-system partition/volume in place and an error persistently prevents you from finishing the process, you will not be able to mount the volume (and access data stored on it) until you entirely DECRYPT the volume (i.e. reverse the process).\n\nIf you need to do so, follow these steps:\n1) Exit this wizard.\n2) In the main VeraCrypt window, select 'Volumes' > 'Resume Interrupted Process'.\n3) Select 'Decrypt'.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the partition/volume?\n\nNote: Keep in mind that the volume cannot be mounted until it has been fully encrypted. You will be able to resume the process of encryption and it will continue from the point it was stopped. You can do so, for example, by selecting 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="en"key="SYSTEM_ENCRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of encryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window. If you want to permanently terminate or reverse the encryption process, select 'System' > 'Permanently Decrypt System Partition/Drive'.</entry>
<entrylang="en"key="SYSTEM_DECRYPTION_DEFER_CONFIRM">Do you want to interrupt and postpone the process of decryption of the system partition/drive?\n\nNote: You will be able to resume the process and it will continue from the point it was stopped. You can do so, for example, by selecting 'System' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window. If you want to reverse the decryption process (and start encrypting), select 'System' > 'Encrypt System Partition/Drive'.</entry>
<entrylang="en"key="FAILED_TO_INTERRUPT_SYSTEM_ENCRYPTION">Error: Failed to interrupt the process of encryption/decryption of the system partition/drive.</entry>
<entrylang="en"key="FAILED_TO_INTERRUPT_WIPING">Error: Failed to interrupt the process of wiping.</entry>
<entrylang="en"key="FAILED_TO_RESUME_SYSTEM_ENCRYPTION">Error: Failed to resume the process of encryption/decryption of the system partition/drive.</entry>
<entrylang="en"key="FAILED_TO_START_WIPING">Error: Failed to start the process of wiping.</entry>
<entrylang="en"key="INCONSISTENCY_RESOLVED">Inconsistency resolved.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</entry>
<entrylang="en"key="UNEXPECTED_STATE">Error: Unexpected state.\n\n\n(If you report a bug in connection with this, please include the following technical information in the bug report:\n%hs)</entry>
<entrylang="en"key="NO_SYS_ENC_PROCESS_TO_RESUME">There is no interrupted process of encryption/decryption of the system partition/drive to resume.\n\nNote: If you want to resume an interrupted process of encryption/decryption of a non-system partition/volume, select 'Volumes' > 'Resume Interrupted Process'.</entry>
<entrylang="en"key="HIDVOL_PROT_BKG_TASK_WARNING">WARNING: VeraCrypt Background Task is disabled. After you exit VeraCrypt, you will not be notified if damage to hidden volume is prevented.\n\nNote: You may shut down the Background Task anytime by right-clicking the VeraCrypt tray icon and selecting 'Exit'.\n\nEnable VeraCrypt Background Task?</entry>
<entrylang="en"key="CHECKING_FS">Checking the file system on the VeraCrypt volume mounted as %s...</entry>
<entrylang="en"key="REPAIRING_FS">Attempting to repair the file system on the VeraCrypt volume mounted as %s...</entry>
<entrylang="en"key="WARN_64_BIT_BLOCK_CIPHER">Warning: This volume is encrypted with a legacy encryption algorithm.\n\nAll 64-bit-block encryption algorithms (e.g., Blowfish, CAST-128, or Triple DES) are deprecated. It will be possible to mount this volume using future versions of VeraCrypt. However, there will be no further enhancements to the implementations of these legacy encryption algorithms. We recommend that you create a new VeraCrypt volume encrypted with a 128-bit-block encryption algorithm (e.g., AES, Serpent, Twofish, etc.) and that you move all files from this volume to the new volume.</entry>
<entrylang="en"key="SYS_AUTOMOUNT_DISABLED">Your system is not configured to auto-mount new volumes. It may be impossible to mount device-hosted VeraCrypt volumes. Auto-mounting can be enabled by executing the following command and restarting the system.\n\nmountvol.exe /E</entry>
<entrylang="en"key="SYS_ASSIGN_DRIVE_LETTER">Please assign a drive letter to the partition/device before proceeding ('Control Panel' > 'System and Maintenance' > 'Administrative Tools' - 'Create and format hard disk partitions').\n\nNote that this is a requirement of the operating system.</entry>
<entrylang="en"key="DISMOUNT_ALL_TC_VOLUMES">Dismount all VeraCrypt volumes</entry>
<entrylang="en"key="UAC_INIT_ERROR">VeraCrypt failed to obtain Administrator privileges.</entry>
<entrylang="en"key="ERR_ACCESS_DENIED">Access was denied by the operating system.\n\nPossible cause: The operating system requires that you have read/write permission (or administrator privileges) for certain folders, files, and devices, in order for you to be allowed to read and write data to/from them. Normally, a user without administrator privileges is allowed to create, read and modify files in his or her Documents folder.</entry>
<entrylang="en"key="SECTOR_SIZE_UNSUPPORTED">Error: The drive uses an unsupported sector size.\n\nIt is currently not possible to create partition/device-hosted volumes on drives that use sectors larger than 4096 bytes. However, note that you can create file-hosted volumes (containers) on such drives.</entry>
<entrylang="en"key="SYSENC_UNSUPPORTED_SECTOR_SIZE_BIOS">It is currently not possible to encrypt a system installed on a disk that uses a sector size other than 512 bytes.</entry>
<entrylang="en"key="NO_SPACE_FOR_BOOT_LOADER">The VeraCrypt Boot Loader requires at least 32 KBytes of free space at the beginning of the system drive (the VeraCrypt Boot Loader needs to be stored in that area). Unfortunately, your drive does not meet this condition.\n\nPlease do NOT report this as a bug/problem in VeraCrypt. To solve this problem, you will need to repartition your disk and leave the first 32 KBytes of the disk free (in most cases, you will need to delete and recreate the first partition). We recommend that you use the Microsoft partition manager that is available e.g. when you are installing Windows.</entry>
<entrylang="en"key="FEATURE_UNSUPPORTED_ON_CURRENT_OS">The feature is not supported on the version of the operating system you are currently using.</entry>
<entrylang="en"key="SYS_ENCRYPTION_UNSUPPORTED_ON_CURRENT_OS">VeraCrypt does not support encryption of a system partition/drive on the version of the operating system you are currently using.</entry>
<entrylang="en"key="SYS_ENCRYPTION_UNSUPPORTED_ON_VISTA_SP0">Before you can encrypt the system partition/drive on Windows Vista, you need to install Service Pack 1 or higher for Windows Vista (no such Service Pack has been installed on this system yet).\n\nNote: Service Pack 1 for Windows Vista resolved an issue causing a shortage of free base memory during system boot.</entry>
<entrylang="en"key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ON_VISTA_SP0">VeraCrypt no longer supports encryption of the system partition/drive on Windows Vista with no Service Pack installed. Before upgrading VeraCrypt, please install Service Pack 1 or higher for Windows Vista.</entry>
<entrylang="en"key="FEATURE_REQUIRES_INSTALLATION">Error: This feature requires VeraCrypt to be installed on the system (you are running VeraCrypt in portable mode).\n\nPlease install VeraCrypt and then try again.</entry>
<entrylang="en"key="WINDOWS_NOT_ON_BOOT_DRIVE_ERROR">WARNING: Windows does not appear to be installed on the drive from which it boots. This is not supported.\n\nYou should continue only if you are sure that Windows is installed on the drive from which it boots.\n\nDo you want to continue?</entry>
<entrylang="en"key="TC_BOOT_LOADER_ALREADY_INSTALLED">CAUTION: The VeraCrypt Boot Loader is already installed on your system drive!\n\nIt is possible that another system on your computer is already encrypted.\n\nWARNING: PROCEEDING WITH ENCRYPTION OF THE CURRENTLY RUNNING SYSTEM MAY MAKE OTHER SYSTEM(S) IMPOSSIBLE TO START AND RELATED DATA INACCESSIBLE.\n\nAre you sure you want to continue?</entry>
<entrylang="en"key="SYS_LOADER_RESTORE_FAILED">Failed to restore the original system loader.\n\nPlease use your VeraCrypt Rescue Disk ('Repair Options' > 'Restore original system loader') or Windows installation medium to replace the VeraCrypt Boot Loader with the Windows system loader.</entry>
<entrylang="en"key="SYS_LOADER_UNAVAILABLE_FOR_RESCUE_DISK">The original system loader will not be stored on the Rescue Disk (probable cause: missing backup file).</entry>
<entrylang="en"key="ERROR_MBR_PROTECTED">Failed to write the MBR sector.\n\nYour BIOS may be configured to protect the MBR sector. Check your BIOS settings (press F2, Delete, or Esc, after powering on your computer) for MBR/antivirus protection.</entry>
<entrylang="en"key="BOOT_LOADER_FINGERPRINT_CHECK_FAILED">WARNING: The verification of VeraCrypt bootloader fingerprint failed!\nYour disk may have been tampered with by an attacker ("Evil Maid" attack).\n\nThis warning can also be triggered if you restored VeraCrypt boot loader using an Rescue Disk generated using a different VeraCrypt version.\n\nYou are advised to change your password immediately which will also restore the correct VeraCrypt bootloader. It is recommended to reinstall VeraCrypt and to take measures to avoid access to this machine by untrusted entities.</entry>
<entrylang="en"key="BOOT_LOADER_VERSION_INCORRECT_PREFERENCES">The required version of the VeraCrypt Boot Loader is currently not installed. This may prevent some of the settings from being saved.</entry>
<entrylang="en"key="CUSTOM_BOOT_LOADER_MESSAGE_HELP">Note: In some situations, you may wish to prevent a person (adversary) that is watching you start the computer from knowing that you use VeraCrypt. The above options allow you to do that by customizing the VeraCrypt boot loader screen. If you enable the first option, no texts will be displayed by the boot loader (not even when you enter the wrong password). The computer will appear to be "frozen" while you can type your password. In addition, a custom message can be displayed to mislead the adversary. For example, fake error messages such as "Missing operating system" (which is normally displayed by the Windows boot loader if it finds no Windows boot partition). It is, however, important to note that if the adversary can analyze the content of the hard drive, he can still find out that it contains the VeraCrypt boot loader.</entry>
<entrylang="en"key="CUSTOM_BOOT_LOADER_MESSAGE_PROMPT">WARNING: Please keep in mind that if you enable this option, the VeraCrypt boot loader will not display any texts (not even when you enter the wrong password). The computer will appear to be "frozen" (unresponsive) while you can type your password (the cursor will NOT move and no asterisk will be displayed when you press a key).\n\nAre you sure you want to enable this option?</entry>
<entrylang="en"key="SYS_PARTITION_OR_DRIVE_APPEARS_FULLY_ENCRYPTED">Your system partition/drive appears to be fully encrypted.</entry>
<entrylang="en"key="SYSENC_UNSUPPORTED_FOR_DYNAMIC_DISK">VeraCrypt does not support encrypting a system drive that has been converted to a dynamic disk.</entry>
<entrylang="en"key="WDE_UNSUPPORTED_FOR_EXTENDED_PARTITIONS">The system drive contains extended (logical) partitions.\n\nYou can encrypt an entire system drive containing extended (logical) partitions only on Windows Vista and later versions of Windows. On Windows XP, you can encrypt an entire system drive provided that it contains only primary partitions.\n\nNote: You can still encrypt the system partition instead of the entire system drive (and, in addition to that, you can create partition-hosted VeraCrypt volumes within any non-system partitions on the drive).</entry>
<entrylang="en"key="WDE_EXTENDED_PARTITIONS_WARNING">WARNING: As you are running Windows XP/2003, after you start encrypting the drive, you must NOT create any extended (logical) partitions on it (you may create only primary partitions). Any extended (logical) partition on the drive would be inaccessible after you start encrypting (the drive currently does not contain any such partition).\n\nNote: If this limitation is not acceptable, you can go back and choose to encrypt only the system partition instead of the entire drive (and, in addition to that, you can create partition-hosted VeraCrypt volumes within any non-system partitions on the drive).\n\nAlternatively, if this limitation is not acceptable, you may want to consider upgrading to Windows Vista or a later version of Windows (you can encrypt an entire system drive containing extended/logical partitions only on Windows Vista or later).</entry>
<entrylang="en"key="SYSDRIVE_NON_STANDARD_PARTITIONS">Your system drive contains a non-standard partition.\n\nIf you are using a notebook, your system drive probably contains a special recovery partition. After the whole system drive is encrypted (including any recovery partition), your system might become unbootable if your computer is using an inappropriately designed BIOS. It would also be impossible to use any recovery partition until the system drive is decrypted. Therefore, we recommend that you encrypt only the system partition.</entry>
<entrylang="sl"key="ASK_ENCRYPT_PARTITION_INSTEAD_OF_DRIVE">Ali želite šifrirati sistemski razdelek namesto celotnega trdega diska ?\n\nZabeležite si, da lahko ustvarite gostujoče VeraCrypt-ove zbirnike na razdelku znotraj kateregakoli nesistemskega razdelka na trdem disku (poleg šifriranja sistemskega razdelka).</entry>
<entrylang="en"key="WHOLE_SYC_DEVICE_RECOM">As your system drive contains only a single partition that occupies the whole drive, it is preferable (more secure) to encrypt the entire drive including the free "slack" space that typically surrounds such a partition.\n\nDo you want to encrypt the entire system drive?</entry>
<entrylang="en"key="TEMP_NOT_ON_SYS_PARTITION">Your system is configured to store temporary files on a non-system partition.\n\nTemporary files may be stored only on the system partition.</entry>
<entrylang="en"key="USER_PROFILE_NOT_ON_SYS_PARTITION">Your user profile files are not stored on the system partition.\n\nUser profile files may be stored only on the system partition.</entry>
<entrylang="en"key="PAGING_FILE_NOT_ON_SYS_PARTITION">There is/are paging file(s) on non-system partitions.\n\nPaging files may be located only on the system partition.</entry>
<entrylang="en"key="RESTRICT_PAGING_FILES_TO_SYS_PARTITION">Do you want to configure Windows to create paging files only on the Windows partition now?\n\nNote that if you click 'Yes', the computer will be restarted. Then start VeraCrypt and try creating the hidden OS again.</entry>
<entrylang="en"key="LEAKS_OUTSIDE_SYSPART_UNIVERSAL_EXPLANATION"> Otherwise, plausible deniability of the hidden operating system might be adversely affected.\n\nNote: If an adversary analyzed the content of such files (residing on a non-system partition), he might find out that you used this wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer). Also note that any such files stored on the system partition will be securely erased by VeraCrypt during the process of creation of the hidden operating system.</entry>
<entrylang="en"key="DECOY_OS_REINSTALL_WARNING">WARNING: During the process of creation of the hidden operating system, you will be required to fully reinstall the currently running system (in order to create a decoy system securely).\n\nNote: The currently running operating system and the entire content of the system partition will be copied to the hidden volume (in order to create the hidden system).\n\n\nAre you sure you will be able to install Windows using a Windows Setup medium (or using a service partition)?</entry>
<entrylang="en"key="DECOY_OS_REQUIREMENTS">For security reasons, if the currently running operating system requires activation, it must be activated before proceeding. Note that the hidden operating system will be created by copying the content of the system partition to a hidden volume (so if this operating system is not activated, the hidden operating system will not be activated either). For more information, see the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide.\n\nImportant: Before proceeding, please make sure you have read the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide.\n\n\nDoes the currently running operating system meet the above condition?</entry>
<entrylang="en"key="CONFIRM_HIDDEN_OS_EXTRA_BOOT_PARTITION">Your system uses an extra boot partition. VeraCrypt does not support hibernation on hidden operating systems that use an extra boot partition (decoy systems can be hibernated without any problems).\n\nPlease note that the boot partition would be shared by both the decoy and the hidden system. Therefore, in order to prevent data leaks and problems while resuming from hibernation, VeraCrypt has to prevent the hidden system from writing to the shared boot partition and from hibernating.\n\n\nDo you want to continue? If you select 'No', instructions for removing the extra boot partition will be displayed.</entry>
<entrylang="en"key="EXTRA_BOOT_PARTITION_REMOVAL_INSTRUCTIONS">\nThe extra boot partition can be removed before installing Windows. To do so, follow these steps:\n\n1) Boot your Windows installation disc.\n\n2) In the Windows installer screen, click 'Install now' > 'Custom (advanced)'.\n\n3) Click 'Drive Options'.\n\n4) Select the main system partition and delete it by clicking 'Delete' and 'OK'.\n\n5) Select the 'System Reserved' partition, click 'Extend', and increase its size so that the operating system can be installed to it.\n\n6) Click 'Apply' and 'OK'.\n\n7) Install Windows on the 'System Reserved' partition.\n\n\nShould an attacker ask why you removed the extra boot partition, you can answer that you wanted to prevent any possible data leaks to the unencrypted boot partition.\n\nNote: You can print this text by clicking the 'Print' button below. If you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after removing the extra boot partition (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).</entry>
<entrylang="en"key="GAP_BETWEEN_SYS_AND_HIDDEN_OS_PARTITION">Warning: There is unallocated space between the system partition and the first partition behind it. After you create the hidden operating system, you must not create any new partitions in that unallocated space. Otherwise, the hidden operating system will be impossible to boot (until you delete such newly created partitions).</entry>
<entrylang="en"key="ALGO_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">This algorithm is currently not supported for system encryption.</entry>
<entrylang="en"key="ALGO_NOT_SUPPORTED_FOR_TRUECRYPT_MODE">This algorithm is not supported for TrueCrypt mode.</entry>
<entrylang="en"key="PIM_NOT_SUPPORTED_FOR_TRUECRYPT_MODE">PIM (Personal Iterations Multiplier) not supported for TrueCrypt mode.</entry>
<entrylang="en"key="PIM_REQUIRE_LONG_PASSWORD">Password must contain 20 or more characters in order to use the specified PIM.\nShorter passwords can only be used if the PIM is 485 or greater.</entry>
<entrylang="en"key="BOOT_PIM_REQUIRE_LONG_PASSWORD">Pre-boot authentication Password must contain 20 or more characters in order to use the specified PIM.\nShorter passwords can only be used if the PIM is 98 or greater.</entry>
<entrylang="en"key="KEYFILES_NOT_SUPPORTED_FOR_SYS_ENCRYPTION">Keyfiles are currently not supported for system encryption.</entry>
<entrylang="en"key="CANNOT_RESTORE_KEYBOARD_LAYOUT">Warning: VeraCrypt could not restore the original keyboard layout. This may cause you to enter a password incorrectly.</entry>
<entrylang="en"key="CANT_CHANGE_KEYB_LAYOUT_FOR_SYS_ENCRYPTION">Error: Cannot set the keyboard layout for VeraCrypt to the standard US keyboard layout.\n\nNote that the password needs to be typed in the pre-boot environment (before Windows starts) where non-US Windows keyboard layouts are not available. Therefore, the password must always be typed using the standard US keyboard layout.</entry>
<entrylang="en"key="ALT_KEY_CHARS_NOT_FOR_SYS_ENCRYPTION">As VeraCrypt temporarily changed the keyboard layout to the standard US keyboard layout, it is not possible to type characters by pressing keys while the right Alt key is held down. However, you can type most of such characters by pressing appropriate keys while the Shift key is held down.</entry>
<entrylang="sl"key="KEYB_LAYOUT_CHANGE_PREVENTED">VeraCrypt je preprečil spremembo postavitve tipkovnice.</entry>
<entrylang="sl"key="KEYB_LAYOUT_SYS_ENC_EXPLANATION">Opomba: Geslo se bo moralo vtipkati v predzagonskem okolju (preden se Okna zaženejo), kjer ni možna postavitev neameriških Okenskih tipkovnic. Tako torej se mora geslo vedno vtipkati z uporabo standardne postavitve ameriške tipkovnice. Čeprav je pa pomembno, da si zabeležite, da dejansko NE potrebujete ameriške tipkovnice. VeraCrypt samodejno zagotavlja, da lahko varno vtipkate geslo (takoj in v predzagonskem okolju) četudi NIMATE prave ameriške tipkovnice.</entry>
<entrylang="en"key="RESCUE_DISK_INFO">Before you can encrypt the partition/drive, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition/drive before Windows starts.\n\n- The VRD will contain a backup of the present content of the first drive track (which typically contains a system loader or boot manager) and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ISO image will be created in the location specified below.</entry>
<entrylang="en"key="RESCUE_DISK_WIN_ISOBURN_PRELAUNCH_NOTE">After you click OK, Microsoft Windows Disc Image Burner will be launched. Please use it to burn the VeraCrypt Rescue Disk ISO image to a CD or DVD.\n\nAfter you do so, return to the VeraCrypt Volume Creation Wizard and follow its instructions.</entry>
<entrylang="en"key="RESCUE_DISK_BURN_INFO">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to burn it to a CD or DVD.\n\n%lsAfter you burn the Rescue Disk, click Next to verify that it has been correctly burned.</entry>
<entrylang="en"key="RESCUE_DISK_BURN_INFO_NO_CHECK">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you should either burn the image to a CD/DVD or move it to a safe location for later use.\n\n%lsClick Next to continue.</entry>
<entrylang="en"key="RESCUE_DISK_BURN_INFO_NONWIN_ISO_BURNER">IMPORTANT: Note that the file must be written to the CD/DVD as an ISO disk image (not as an individual file). For information on how to do so, please refer to the documentation of your CD/DVD recording software. If you do not have any CD/DVD recording software that can write the ISO disk image to a CD/DVD, click the link below to download such free software.\n\n</entry>
<entrylang="en"key="LAUNCH_WIN_ISOBURN">Launch Microsoft Windows Disc Image Burner</entry>
<entrylang="en"key="RESCUE_DISK_BURN_NO_CHECK_WARN">WARNING: If you already created a VeraCrypt Rescue Disk in the past, it cannot be reused for this system partition/drive because it was created for a different master key! Every time you encrypt a system partition/drive, you must create a new VeraCrypt Rescue Disk for it even if you use the same password.</entry>
<entrylang="en"key="CANNOT_SAVE_SYS_ENCRYPTION_SETTINGS">Error: Cannot save system encryption settings.</entry>
<entrylang="en"key="CANNOT_INITIATE_SYS_ENCRYPTION_PRETEST">Cannot initiate the system encryption pretest.</entry>
<entrylang="en"key="CANNOT_INITIATE_HIDDEN_OS_CREATION">Cannot initiate the process of creation of the hidden operating system.</entry>
<entrylang="en"key="INPLACE_ENC_WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data, it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. This also applies to data that are overwritten with their encrypted form (which happens when VeraCrypt initially encrypts an unencrypted partition or drive). According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data you intend encrypt, you may want to select one of the wipe modes (existing data will NOT be lost). Note that wiping will NOT be performed after the partition/drive is encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk.</entry>
<entrylang="en"key="WIPE_MODE_INFO">On some types of storage media, when data is overwritten with other data (e.g. when the data is erased), it may be possible to recover the overwritten data using techniques such as magnetic force microscopy. According to some studies and governmental publications, recovery of overwritten data can be prevented (or made very difficult) by overwritting the data with pseudorandom and certain non-random data a certain number of times. Therefore, if you believe that an adversary might be able to use such techniques to recover the data that is to be erased, you may want to select one of the multi-pass wipe modes.\n\nNote: The more wipe passes you use, the longer it takes to erase the data.</entry>
<entrylang="en"key="DEVICE_WIPE_PAGE_INFO_HIDDEN_OS">\nNote: You can interrupt the process of wiping, shut down your computer, start the hidden system again and then resume the process (this wizard will be launched automatically). However, if you interrupt it, the entire process of wiping will have to start from the beginning.</entry>
<entrylang="en"key="DEVICE_WIPE_PAGE_INFO">\n\nNote: If you interrupt the process of wiping and then attempt to resume it, the entire process will have to start from the beginning.</entry>
<entrylang="en"key="CONFIRM_WIPE_ABORT">Do you want to abort the process of wiping?</entry>
<entrylang="en"key="CONFIRM_WIPE_START">Warning: The entire content of the selected partition/device will be erased and lost.</entry>
<entrylang="en"key="CONFIRM_WIPE_START_DECOY_SYS_PARTITION">The entire content of the partition where the original system resides will be erased.\n\nNote: The entire content of the partition that is to be erased has been copied to this hidden system partition.</entry>
<entrylang="en"key="WIPE_MODE_WARN">WARNING: Note that when you choose e.g. the 3-pass wipe mode, the time necessary to encrypt the partition/drive will be up to 4 times longer. Likewise, if you choose the 35-pass wipe mode, it will be up to 36 times longer (it might even take several weeks).\n\nHowever, please note that wiping will NOT be performed after the partition/drive is fully encrypted. When the partition/drive is fully encrypted, no unencrypted data is written to it. Any data being written to it is first encrypted on the fly in memory and only then is the (encrypted) data written to the disk (so the performance will NOT be affected).\n\nAre you sure you want to use the wipe mode?</entry>
<entrylang="sl"key="MULTI_BOOT_FOR_ADVANCED_ONLY">OPOZORILO: Neizkušeni uporabniki naj ne bi nikoli poizkušali šifrirati Okna v nastavitvi poljubnega zagona.\n\nNadaljujem?</entry>
<entrylang="en"key="HIDDEN_OS_MULTI_BOOT">When creating/using a hidden operating system, VeraCrypt supports multi-boot configurations only when the following conditions are met:\n\n- The currently running operating system must be installed on the boot drive, which must not contain any other operating systems.\n\n- Operating systems installed on other drives must not use any boot loader residing on the drive on which the currently running operating system is installed.\n\nAre the above conditions met?</entry>
<entrylang="en"key="UNSUPPORTED_HIDDEN_OS_MULTI_BOOT_CFG">VeraCrypt does not support this multi-boot configuration when creating/using a hidden operating system.</entry>
<entrylang="sl"key="SYSENC_MULTI_BOOT_SYS_EQ_BOOT_HELP">Je trenutno zaganjajoči operacijski sistem naložen na zagonskem pogonu?\n\nOpomba: Včasih Okna niso naložena na istem pogonu kot zagonski program Oken (zagonski razdelek). Če so to tovrstne okoliščine (kot navedeno), potem izberite možnost 'Ne'.</entry>
<entrylang="en"key="SYS_PARTITION_MUST_BE_ON_BOOT_DRIVE">VeraCrypt currently does not support encrypting an operating system that does not boot from the drive on which it is installed.</entry>
<entrylang="sl"key="SYSENC_MULTI_BOOT_NBR_SYS_DRIVES_HELP">Koliko pogonov vsebuje operacijski sistem?\n\nOpomba: Na primer, če imate katerikoli operacijski sistem (npr., Okna Mac OS X, Linux, itn.) naložen na Vašem primarnem pogonu in če imate še kateri dodatni operacijski sistem naložen na Vašem sekundarnem pogonu, izberite možnost 'Dva ali več'.</entry>
<entrylang="en"key="WDE_UNSUPPORTED_FOR_MULTIPLE_SYSTEMS_ON_ONE_DRIVE">VeraCrypt currently does not support encrypting a whole drive that contains multiple operating systems.\n\nPossible Solutions:\n\n- You can still encrypt one of the systems if you go back and choose to encrypt only a single system partition (as opposed to choosing to encrypt the entire system drive).\n\n- Alternatively, you will be able to encrypt the entire drive if you move some of the systems to other drives leaving only one system on the drive you want to encrypt.</entry>
<entrylang="en"key="SYSENC_MULTI_BOOT_ADJACENT_SYS_TITLE">Multiple Systems on Single Drive</entry>
<entrylang="en"key="SYSENC_MULTI_BOOT_ADJACENT_SYS_HELP">Are there any other operating systems installed on the drive on which the currently running operating system is installed?\n\nNote: For example, if the currently running operating system is installed on the drive #0, which contains several partitions, and if one of the partitions contains Windows and another partition contains any additional operating system (e.g. Windows, Mac OS X, Linux, etc.), select 'Yes'.</entry>
<entrylang="en"key="SYSENC_MULTI_BOOT_NONWIN_BOOT_LOADER_HELP">Is a non-Windows boot loader (or boot manager) installed in the master boot record (MBR)?\n\nNote: For example, if the first track of the boot drive contains GRUB, LILO, XOSL, or some other non-Windows boot manager (or boot loader), select 'Yes'.</entry>
<entrylang="en"key="CUSTOM_BOOT_MANAGERS_IN_MBR_UNSUPPORTED">VeraCrypt currently does not support multi-boot configurations where a non-Windows boot loader is installed in the Master Boot Record.\n\nPossible Solutions:\n\n- If you use a boot manager to boot Windows and Linux, move the boot manager (typically, GRUB) from the Master Boot Record to a partition. Then start this wizard again and encrypt the system partition/drive. Note that the VeraCrypt Boot Loader will become your primary boot manager and it will allow you to launch the original boot manager (e.g. GRUB) as your secondary boot manager (by pressing Esc in the VeraCrypt Boot Loader screen) and thus you will be able boot Linux.</entry>
<entrylang="en"key="WINDOWS_BOOT_LOADER_HINTS">If the currently running operating system is installed on the boot partition, then, after you encrypt it, you will need to enter the correct password even if you want to start any other unencrypted Windows system(s) (as they will share a single encrypted Windows boot loader/manager).\n\nIn contrast, if the currently running operating system is not installed on the boot partition (or if the Windows boot loader/manager is not used by any other system), then, after you encrypt this system, you will not need to enter the correct password to boot the other unencrypted system(s) -- you will only need to press the Esc key to start the unencrypted system (if there are multiple unencrypted systems, you will also need to choose which system to start in the VeraCrypt Boot Manager menu).\n\nNote: Typically, the earliest installed Windows system is installed on the boot partition.</entry>
<entrylang="en"key="SYSENC_PRE_DRIVE_ANALYSIS_TITLE">Encryption of Host Protected Area</entry>
<entrylang="en"key="SYSENC_PRE_DRIVE_ANALYSIS_HELP">At the end of many drives, there is an area that is normally hidden from the operating system (such areas are usually referred to as Host Protected Areas). However, some programs can read and write data from/to such areas.\n\nWARNING: Some computer manufacturers may use such areas to store tools and data for RAID, system recovery, system setup, diagnostic, or other purposes. If such tools or data must be accessible before booting, the hidden area should NOT be encrypted (choose 'No' above).\n\nDo you want VeraCrypt to detect and encrypt such a hidden area (if any) at the end of the system drive?</entry>
<entrylang="sl"key="SYSENC_NORMAL_TYPE_HELP">Izberite to možnost če želite samo šifrirati sistemski razdelek ali celoten trdi disk.</entry>
<entrylang="en"key="SYSENC_HIDDEN_TYPE_HELP">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion). If you select this option, you will create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password to the hidden operating system. For a detailed explanation, please click the link below.</entry>
<entrylang="en"key="HIDDEN_OS_PREINFO">It may happen that you are forced by somebody to decrypt the operating system. There are many situations where you cannot refuse to do so (for example, due to extortion).\n\nUsing this wizard, you can create a hidden operating system whose existence should be impossible to prove (provided that certain guidelines are followed). Thus, you will not have to decrypt or reveal the password for the hidden operating system.</entry>
<entrylang="sl"key="SYSENC_HIDDEN_OS_REQ_CHECK_PAGE_HELP">V nadaljnih korakih boste ustvarili dva VeraCrypt-ova zbirnika (zunanji in skriti) znotraj prvega razdelka zadaj, za sistemskim razdelkom. Skriti zbirnik bo vseboval skriti operacijski sistem (OS). VeraCrypt bo ustvaril skriti OS s kopiranjem vsebine sistemskega razdelka (kjer je naložen trenutno zaganjajoči-se OS) v skriti zbirnik. Na zunanji zbirnik boste pa prekopirali na videz nekaj občutljivih datotek, katerih dejansko NE želite skriti. Datoteke bodo tam na ogled vsakomur, ki bo Vas silil v razkritje gesla do Vašega skritega razdelka z OS. Lahko razkrijete geslo za zunanji zbirnik znotraj skritega OS razdelka (obstoj skritega OS ostaja skrivnost).\n\nV zaključku boste na razdelek trenutno zaganjajočega-se OS naložili nov OS, ki bo imel vlogo vabe in ga boste tudi šifrirali. Slednji ne sme vsebovati občutljivih podatkov in bo tako tam za vsakogar na ogled, ki bo od Vas zahteval-a razkritje Vašega predzagonskega overitvenega gesla. V celoti nastavite tri gesla. Dva od njih lahko razkrijete (za OS vloge vabe in za zunanji zbirnik). Če uporabite tretjega, se bo skriti OS zagnal.</entry>
<entrylang="en"key="SYSENC_DRIVE_ANALYSIS_INFO">Please wait while VeraCrypt is detecting possible hidden sectors at the end of the system drive. Note that it may take a long time to complete.\n\nNote: In very rare cases, on some computers, the system may become unresponsive during this detection process. If it happens, restart the computer, start VeraCrypt, repeat the previous steps but skip this detection process. Note that this issue is not caused by a bug in VeraCrypt.</entry>
<entrylang="sl"key="SYS_ENCRYPTION_SPAN_TITLE">Mesto za šifrirati</entry>
<entrylang="en"key="SYS_ENCRYPTION_SPAN_WHOLE_SYS_DRIVE_HELP">Select this option if you want to encrypt the entire drive on which the currently running Windows system is installed. The whole drive, including all its partitions, will be encrypted except the first track where the VeraCrypt Boot Loader will reside. Anyone who wants to access a system installed on the drive, or files stored on the drive, will need to enter the correct password each time before the system starts. This option cannot be used to encrypt a secondary or external drive if Windows is not installed on it and does not boot from it.</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT">VeraCrypt has found no CD/DVD burner connected to your computer. VeraCrypt needs a CD/DVD burner to burn a bootable VeraCrypt Rescue Disk containing a backup of the encryption keys, VeraCrypt boot loader, original system loader, etc.\n\nWe strongly recommend that you burn the VeraCrypt Rescue Disk.</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO">I have no CD/DVD burner but I will store the Rescue Disk ISO image on a removable drive (e.g. USB flash drive).</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_WILL_CONNECT_LATER">I will connect a CD/DVD burner to my computer later. Terminate the process now.</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_CONNECTED_NOW">A CD/DVD burner is connected to my computer now. Continue and write the Rescue Disk.</entry>
<entrylang="en"key="CD_BURNER_NOT_PRESENT_WILL_STORE_ISO_INFO">Please follow these steps:\n\n1) Connect a removable drive, such as a USB flash drive, to your computer now.\n\n2) Copy the VeraCrypt Rescue Disk image file (%s) to the removable drive.\n\nIn case you need to use the VeraCrypt Rescue Disk in the future, you will be able to connect your removable drive (containing the VeraCrypt Rescue Disk image) to a computer with a CD/DVD burner and create a bootable VeraCrypt Rescue Disk by burning the image to a CD or DVD. IMPORTANT: Note that the VeraCrypt Rescue Disk image file must be written to the CD/DVD as an ISO disk image (not as an individual file).</entry>
<entrylang="en"key="RESCUE_DISK_DISK_VERIFIED_TITLE">Rescue Disk Verified</entry>
<entrylang="en"key="RESCUE_DISK_VERIFIED_INFO">\nThe VeraCrypt Rescue Disk has been successfully verified. Please remove it from the drive now and store it in a safe place.\n\nClick Next to continue.</entry>
<entrylang="en"key="REMOVE_RESCUE_DISK_FROM_DRIVE">WARNING: During the next steps, the VeraCrypt Rescue Disk must not be in the drive. Otherwise, it will not be possible to complete the steps correctly.\n\nPlease remove it from the drive now and store it in a safe place. Then click OK.</entry>
<entrylang="en"key="PREBOOT_NOT_LOCALIZED">Warning: Due to technical limitations of the pre-boot environment, texts displayed by VeraCrypt in the pre-boot environment (i.e. before Windows starts) cannot be localized. The VeraCrypt Boot Loader user interface is completely in English.\n\nContinue?</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO">Before encrypting your system partition or drive, VeraCrypt needs to verify that everything works correctly.\n\nAfter you click Test, all the necessary components (for example, the pre-boot authentication component, i.e. the VeraCrypt Boot Loader) will be installed and your computer will be restarted. Then you will have to enter your password in the VeraCrypt Boot Loader screen that will appear before Windows starts. After Windows starts, you will be automatically informed about the result of this pretest.\n\nThe following device will be modified: Drive #%d\n\n\nIf you click Cancel now, nothing will be installed and the pretest will not be performed.</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_1">IMPORTANT NOTES -- PLEASE READ OR PRINT (click 'Print'):\n\nNote that none of your files will be encrypted before you successfully restart your computer and start Windows. Thus, if anything fails, your data will NOT be lost. However, if something does go wrong, you might encounter difficulties in starting Windows. Therefore, please read (and, if possible, print) the following guidelines on what to do if Windows cannot start after you restart the computer.\n\n</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_2">What to Do If Windows Cannot Start\n------------------------------------------------\n\nNote: These instructions are valid only if you have not started encrypting.\n\n- If Windows does not start after you enter the correct password (or if you repeatedly enter the correct password but VeraCrypt says that the password is incorrect), do not panic. Restart (power off and on) the computer, and in the VeraCrypt Boot Loader screen, press the Esc key on your keyboard (and if you have multiple systems, choose which to start). Then Windows should start (provided that it is not encrypted) and VeraCrypt will automatically ask whether you want to uninstall the pre-boot authentication component. Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_3">- If the previous steps do not help or if the VeraCrypt Boot Loader screen does not appear (before Windows starts), insert the VeraCrypt Rescue Disk into your CD/DVD drive and restart your computer. If the VeraCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the VeraCrypt Rescue Disk screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The VeraCrypt Rescue Disk screen should appear now. In the VeraCrypt Rescue Disk screen, select 'Repair Options' by pressing F8 on your keyboard. From the 'Repair Options' menu, select 'Restore original system loader'. Then remove the Rescue Disk from your CD/DVD drive and restart your computer. Windows should start normally (provided that it is not encrypted).\n\n</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_INFO2_PORTION_4">Note that the previous steps do NOT work if the system partition/drive is encrypted (nobody can start Windows or access encrypted data on the drive without the correct password even if he or she follows the previous steps).\n\n\nNote that even if you lose your VeraCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</entry>
<entrylang="en"key="SYS_ENCRYPTION_PRETEST_RESULT_INFO">The pretest has been successfully completed.\n\nWARNING: Please note that if power supply is suddenly interrupted while encrypting existing data in place, or when the operating system crashes due to a software error or hardware malfunction while VeraCrypt is encrypting existing data in place, portions of the data will be corrupted or lost. Therefore, before you start encrypting, please make sure that you have backup copies of the files you want to encrypt. If you do not, please back up the files now (you can click Defer, back up the files, then run VeraCrypt again anytime, and select 'System' > 'Resume Interrupted Process' to start encrypting).\n\nWhen ready, click Encrypt to start encrypting.</entry>
<entrylang="en"key="SYSENC_ENCRYPTION_PAGE_INFO">You can click Pause or Defer anytime to interrupt the process of encryption or decryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. To prevent slowdown when the system or applications write or read data from the system drive, VeraCrypt automatically waits until the data is written or read (see Status above) and then automatically continues encrypting or decrypting.</entry>
<entrylang="en"key="NONSYS_INPLACE_ENC_ENCRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of encryption, exit this wizard, restart or shut down your computer, and then resume the process, which will continue from the point it was stopped. Note that the volume cannot be mounted until it has been fully encrypted.</entry>
<entrylang="en"key="NONSYS_INPLACE_DEC_DECRYPTION_PAGE_INFO">\n\nYou can click Pause or Defer anytime to interrupt the process of decryption, exit this wizard, restart or shut down the computer, and then resume the process, which will continue from the point where it was stopped. Note that the volume cannot be mounted until it has been fully decrypted.</entry>
<entrylang="en"key="SYSENC_HIDDEN_OS_INITIAL_INFO_TITLE">Hidden System Started</entry>
<entrylang="en"key="SYSENC_HIDDEN_OS_WIPE_INFO">Windows creates (typically, without your knowledge or consent) various log files, temporary files, etc., on the system partition. It also saves the content of RAM to hibernation and paging files located on the system partition. Therefore, if an adversary analyzed files stored on the partition where the original system (of which the hidden system is a clone) resides, he might find out, for example, that you used the VeraCrypt wizard in the hidden-system-creation mode (which might indicate the existence of a hidden operating system on your computer).\n\nTo prevent such issues, VeraCrypt will, in the next steps, securely erase the entire content of the partition where the original system resides. Afterwards, in order to achieve plausible deniability, you will need to install a new system on the partition and encrypt it. Thus you will create the decoy system and the whole process of creation of the hidden operating system will be completed.</entry>
<entrylang="en"key="OS_WIPING_NOT_FINISHED_ASK">The hidden operating system has been successfully created. However, before you can start using it (and achieve plausible deniability), you need to securely erase (using VeraCrypt) the entire content of the partition where the currently running operating system is installed. Before you can do that, you need to restart the computer and, in the VeraCrypt Boot Loader screen (which appears before Windows starts), enter the pre-boot authentication password for the hidden operating system. Then, after the hidden system starts, the VeraCrypt wizard will be launched automatically.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process and the hidden system will NOT be accessible (because the VeraCrypt Boot Loader will be removed).</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_ASK">You have scheduled the process of creation of a hidden operating system. The process has not been completed yet. To complete it, you need to restart the computer and, in the VeraCrypt Boot Loader screen (which appears before Windows starts), enter the password for the hidden operating system.\n\nNote: If you choose to terminate the process of creation of the hidden operating system now, you will NOT be able to resume the process.</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_RETRY">Restart the computer and proceed</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_TERMINATE">Permanently terminate the process of creation of the hidden operating system</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_NOT_FINISHED_CHOICE_ASK_LATER">Do nothing now and ask again later</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_1">\nIF POSSIBLE, PLEASE PRINT THIS TEXT (click 'Print' below).\n\n\nHow and When to Use VeraCrypt Rescue Disk (After Encrypting)\n-----------------------------------------------------------------------------------\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_2">I. How to Boot VeraCrypt Rescue Disk\n\nTo boot a VeraCrypt Rescue Disk, insert it into your CD/DVD drive and restart your computer. If the VeraCrypt Rescue Disk screen does not appear (or if you do not see the 'Repair Options' item in the 'Keyboard Controls' section of the screen), it is possible that your BIOS is configured to attempt to boot from hard drives before CD/DVD drives. If that is the case, restart your computer, press F2 or Delete (as soon as you see a BIOS start-up screen), and wait until a BIOS configuration screen appears. If no BIOS configuration screen appears, restart (reset) the computer again and start pressing F2 or Delete repeatedly as soon as you restart (reset) the computer. When a BIOS configuration screen appears, configure your BIOS to boot from the CD/DVD drive first (for information on how to do so, please refer to the documentation for your BIOS/motherboard or contact your computer vendor's technical support team for assistance). Then restart your computer. The VeraCrypt Rescue Disk screen should appear now. Note: In the VeraCrypt Rescue Disk screen, you can select 'Repair Options' by pressing F8 on your keyboard.\n\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_3">II. When and How to Use VeraCrypt Rescue Disk (After Encrypting)\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_4">1) If the VeraCrypt Boot Loader screen does not appear after you start your computer (or if Windows does not boot), the VeraCrypt Boot Loader may be damaged. The VeraCrypt Rescue Disk allows you to restore it and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore VeraCrypt Boot Loader'. Then press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive and restart your computer.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_5">2) If you repeatedly enter the correct password but VeraCrypt says that the password is incorrect, the master key or other critical data may be damaged. The VeraCrypt Rescue Disk allows you to restore them and thus to regain access to your encrypted system and data (however, note that you will still have to enter the correct password then). In the Rescue Disk screen, select 'Repair Options' > 'Restore key data'. Then enter your password, press 'Y' to confirm the action, remove the Rescue Disk from your CD/DVD drive, and restart your computer.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_6">3) If the VeraCrypt Boot Loader is damaged, you can avoid running it by booting directly from the VeraCrypt Rescue Disk. Insert your Rescue Disk into your CD/DVD drive and then enter your password in the Rescue Disk screen.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_7">4) If Windows is damaged and cannot start, the VeraCrypt Rescue Disk allows you to permanently decrypt the partition/drive before Windows starts. In the Rescue Disk screen, select 'Repair Options' > 'Permanently decrypt system partition/drive'. Enter the correct password and wait until decryption is complete. Then you can e.g. boot your MS Windows setup CD/DVD to repair your Windows installation.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_8">Note: Alternatively, if Windows is damaged (cannot start) and you need to repair it (or access files on it), you can avoid decrypting the system partition/drive by following these steps: If you have multiple operating systems installed on your computer, boot the one that does not require pre-boot authentication. If you do not have multiple operating systems installed on your computer, you can boot a WinPE or BartPE CD/DVD or you can connect your system drive as a secondary or external drive to another computer and then boot the operating system installed on the computer. After you boot a system, run VeraCrypt, click 'Select Device', select the affected system partition, click 'OK', select 'System' > 'Mount Without Pre-Boot Authentication', enter your pre-boot authentication password and click 'OK'. The partition will be mounted as a regular VeraCrypt volume (data will be on-the-fly decrypted/encrypted in RAM on access, as usual).\n\n\n</entry>
<entrylang="en"key="RESCUE_DISK_HELP_PORTION_9">Note that even if you lose your VeraCrypt Rescue Disk and an attacker finds it, he or she will NOT be able to decrypt the system partition or drive without the correct password.</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_1">\n\nI M P O R T A N T -- PLEASE PRINT THIS TEXT IF POSSIBLE (click 'Print' below).\n\n\nNote: This text will be automatically displayed each time you start the hidden system until you start creating the decoy system.\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_2">How to Create Decoy System Safely and Securely\n----------------------------------------------------------------------------\n\nIn order to achieve plausible deniability, you need to create the decoy operating system now. To do so, follow these steps:\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_3">1) For security reasons, shut down your computer and leave it powered off for at least several minutes (the longer, the better). This is required to clear the memory, which contains sensitive data. Then turn on the computer but do not boot the hidden system.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_4">2) Install Windows on the partition whose content has been erased (i.e. on the partition where the original system, of which the hidden system is a clone, was installed).\n\nIMPORTANT: WHEN YOU START INSTALLING THE DECOY SYSTEM, THE HIDDEN SYSTEM WILL *NOT* BE POSSIBLE TO BOOT (because the VeraCrypt Boot Loader will be erased by the Windows system installer). THIS IS NORMAL AND EXPECTED. PLEASE DO NOT PANIC. YOU WILL BE ABLE TO BOOT THE HIDDEN SYSTEM AGAIN AS SOON AS YOU START ENCRYPTING THE DECOY SYSTEM (because VeraCrypt will then automatically install the VeraCrypt Boot Loader on the system drive).\n\nImportant: The size of the decoy system partition must remain the same as the size of the hidden volume (this condition is now met). Moreover, you must not create any partition between the decoy system partition and the partition where the hidden system resides.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_5">3) Boot the decoy system (which you installed in step 2 and install VeraCrypt on it).\n\nKeep in mind that the decoy system must never contain any sensitive data.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_6">4) On the decoy system, run VeraCrypt and select 'System' > 'Encrypt System Partition/Drive'. The VeraCrypt Volume Creation Wizard window should appear.\n\nThe following steps apply to the VeraCrypt Volume Creation Wizard.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_7">5) In the VeraCrypt Volume Creation Wizard, do NOT select the 'Hidden' option. Leave the 'Normal' option selected and click 'Next'.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_8">6) Select the option 'Encrypt the Windows system partition' and then click 'Next'.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_9">7) If there are only the hidden system and the decoy system installed on the computer, select the option 'Single-boot' (if there are more than these two systems installed on the computer, select 'Multi-boot'). Then click 'Next'.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_10">8) IMPORTANT: In this step, FOR THE DECOY SYSTEM, YOU MUST SELECT THE SAME ENCRYPTION ALGORITHM AND HASH ALGORITHM THAT YOU SELECTED FOR THE HIDDEN SYSTEM! OTHERWISE, THE HIDDEN SYSTEM WILL BE INACCESSIBLE! In other words, the decoy system must be encrypted with the same encryption algorithm as the hidden system. Note: The reason is that the decoy system and the hidden system will share a single boot loader, which supports only a single algorithm, selected by the user (for each algorithm, there is a special version of the VeraCrypt Boot Loader).\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_11">9) In this step, choose a password for the decoy operating system. This will be the password that you will be able to reveal to an adversary if you are asked or forced to disclose your pre-boot authentication password (the other password you can reveal is the one for the outer volume). The existence of the third password (i.e. of the pre-boot authentication password for the hidden operating system) will remain secret.\n\nImportant: The password you choose for the decoy system must be substantially different from the one you chose for the hidden volume (i.e. for the hidden operating system).\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_12">10) Follow the remaining instructions in the wizard so as to encrypt the decoy operating system.\n\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_13">After Decoy System Is Created\n------------------------------------------------\n\nAfter you encrypt the decoy system, the whole process of creation of the hidden operating system will be completed and you will be able to use these three passwords:\n\n1) Pre-boot authentication password for the hidden operating system.\n\n2) Pre-boot authentication password for the decoy operating system.\n\n3) Password for the outer volume.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_14">If you want to start the hidden operating system, you will just need to enter the password for the hidden operating system in the VeraCrypt Boot Loader screen (which appears after you turn on or restart your computer).\n\nIf you want to start the decoy operating system, you will just need to enter the password for the decoy operating system in the VeraCrypt Boot Loader screen.\n\nThe password for the decoy system can be disclosed to anyone forcing you to reveal your pre-boot authentication password. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_15">The third password (for the outer volume) can be disclosed to anyone forcing you to reveal the password for the first partition behind the system partition, where both the outer volume and the hidden volume (containing the hidden operating system) reside. The existence of the hidden volume (and of the hidden operating system) will remain secret.\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_16">If you revealed the password for the decoy system to an adversary and he asked you why the free space of the (decoy) system partition contains random data, you could answer, for example: "The partition previously contained a system encrypted by VeraCrypt, but I forgot the pre-boot authentication password (or the system was damaged and stopped booting), so I had to reinstall Windows and encrypt the partition again."\n\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_17">If all the instructions are followed and if the precautions and requirements listed in the section "Security Requirements and Precautions Pertaining to Hidden Volumes" in the VeraCrypt User's Guide are followed, it should be impossible to prove that the hidden volume and hidden operating system exist, even when the outer volume is mounted or when the decoy operating system is decrypted or started.\n\nIf you save a copy of this text or print it (strongly recommended, unless your printer stores copies of documents it prints on its internal drive), you should destroy any copies of it after you have created the decoy system and after you have understood all the information contained in the text (otherwise, if such a copy was found, it might indicate that there is a hidden operating system on this computer).\n\n</entry>
<entrylang="en"key="DECOY_OS_INSTRUCTIONS_PORTION_18">WARNING: IF YOU DO NOT PROTECT THE HIDDEN VOLUME (for information on how to do so, refer to the section "Protection of Hidden Volumes Against Damage" in the VeraCrypt User's Guide), DO NOT WRITE TO THE OUTER VOLUME (note that the decoy operating system is NOT installed in the outer volume). OTHERWISE, YOU MAY OVERWRITE AND DAMAGE THE HIDDEN VOLUME (AND THE HIDDEN OPERATING SYSTEM WITHIN IT)!</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_PREINFO_TITLE">Operating System Cloning</entry>
<entrylang="en"key="HIDDEN_OS_CREATION_PREINFO_HELP">In the next steps, VeraCrypt will create the hidden operating system by copying the content of the system partition to the hidden volume (data being copied will be encrypted on the fly with an encryption key different from the one that will be used for the decoy operating system).\n\nPlease note that the process will be performed in the pre-boot environment (before Windows starts) and it may take a long time to complete; several hours or even several days (depending on the size of the system partition and on the performance of your computer).\n\nYou will be able to interrupt the process, shut down your computer, start the operating system and then resume the process. However, if you interrupt it, the entire process of copying the system will have to start from the beginning (because the content of the system partition must not change during cloning).</entry>
<entrylang="en"key="CONFIRM_CANCEL_HIDDEN_OS_CREATION">Do you want to cancel the entire process of creation of the hidden operating system?\n\nNote: You will NOT be able to resume the process if you cancel it now.</entry>
<entrylang="en"key="CONFIRM_CANCEL_SYS_ENC_PRETEST">Do you want to cancel the system encryption pretest?</entry>
<entrylang="en"key="BOOT_PRETEST_FAILED_RETRY">The VeraCrypt system encryption pretest failed. Do you want to try again?\n\nIf you select 'No', the pre-boot authentication component will be uninstalled.\n\nNotes:\n\n- If the VeraCrypt Boot Loader did not ask you to enter the password before Windows started, it is possible that your operating system does not boot from the drive on which it is installed. This is not supported.\n\n- If you used an encryption algorithm other than AES and the pretest failed (and you entered the password), it may have been caused by an inappropriately designed driver. Select 'No', and try encrypting the system partition/drive again, but use the AES encryption algorithm (which has the lowest memory requirements).\n\n- For more possible causes and solutions, see: https://www.veracrypt.fr/en/Troubleshooting.html</entry>
<entrylang="sl"key="SYS_DRIVE_NOT_ENCRYPTED">Sistemski razdelek/pogon očitno ni šifriran (ne deloma ali v celoti).</entry>
<entrylang="en"key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED">Your system partition/drive is encrypted (partially or fully).\n\nPlease decrypt your system partition/drive entirely before proceeding. To do so, select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="en"key="SETUP_FAILED_BOOT_DRIVE_ENCRYPTED_DOWNGRADE">When the system partition/drive is encrypted (partially or fully), you cannot downgrade VeraCrypt (but you can upgrade it or reinstall the same version).</entry>
<entrylang="en"key="SYS_ENCRYPTION_OR_DECRYPTION_IN_PROGRESS">Your system partition/drive is currently being encrypted, decrypted, or otherwise modified. Please interrupt the encryption/decryption/modification process (or wait until it is complete) before proceeding.</entry>
<entrylang="sl"key="SYSTEM_ENCRYPTION_IN_PROGRESS_ELSEWHERE">Eden primer VeraCrypt-ovega čarovnika za ustvarjanje zbirnikov je trenutno na tem sistemu zagnan in izvaja ali pripravlja šifriranje/dešifriranje sistemskega razdelka/pogona. Preden nadaljujete prosim, da počakate da le-ta zaključi in ga nato zaprite. Če ga pa ne morete zapreti, potem pa prosim, da ponovno zaženete računalnik preden nadaljujete.</entry>
<entrylang="en"key="SYSTEM_ENCRYPTION_NOT_COMPLETED">The process of encryption or decryption of the system partition/drive has not been completed. Please wait until it is complete before proceeding.</entry>
<entrylang="en"key="ERR_ENCRYPTION_NOT_COMPLETED">Error: The process of encryption of the partition/drive has not been completed. It must be completed first.</entry>
<entrylang="en"key="ERR_NONSYS_INPLACE_ENC_INCOMPLETE">Error: The process of encryption of the partition/volume has not been completed. It must be completed first.\n\nNote: To resume the process, select 'Volumes' > 'Resume Interrupted Process' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="en"key="ERR_SYS_HIDVOL_HEAD_REENC_MODE_WRONG">The password is correct, VeraCrypt has successfully decrypted the volume header and detected that this volume is a hidden system volume. However, you cannot modify the header of a hidden system volume this way.\n\nTo change the password for a hidden system volume, boot the operating system residing in the hidden volume, and then select 'System' > 'Change Password' from the menu bar of the main VeraCrypt window.\n\nTo set the header key derivation algorithm, boot the hidden operating system and then select 'System' > 'Set Header Key Derivation Algorithm'.</entry>
<entrylang="en"key="CANNOT_DECRYPT_HIDDEN_OS">VeraCrypt does not support in-place decryption of a hidden system partition.\n\nNote: If you want to decrypt the decoy system partition, boot the decoy system, and then select 'System' > 'Permanently Decrypt System Partition/Drive' from the menu bar of the main VeraCrypt window.</entry>
<entrylang="en"key="DEVICE_SELECTED_IN_NON_DEVICE_MODE">You have selected a partition or a device but the wizard mode you selected is suitable only for file containers.\n\nDo you want to change the wizard mode?</entry>
<entrylang="en"key="CONFIRM_SYSTEM_ENCRYPTION_MODE">You have selected the system partition/drive (or the boot partition), but the wizard mode you selected is suitable only for non-system partitions/drives.\n\nDo you want to set up pre-boot authentication (which means that you will need to enter your password each time before Windows boots/starts) and encrypt the system partition/drive?</entry>
<entrylang="en"key="CONFIRM_DECRYPT_SYS_DEVICE">Are you sure you want to permanently decrypt the system partition/drive?</entry>
<entrylang="en"key="CONFIRM_DECRYPT_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the system partition/drive, unencrypted data will be written to it.\n\nAre you really sure you want to permanently decrypt the system partition/drive?</entry>
<entrylang="en"key="CONFIRM_DECRYPT_NON_SYS_DEVICE">Are you sure you want to permanently decrypt the following volume?</entry>
<entrylang="en"key="CONFIRM_DECRYPT_NON_SYS_DEVICE_CAUTION">CAUTION: If you permanently decrypt the VeraCrypt volume, unencrypted data will be written to the disk.\n\nAre you really sure you want to permanently decrypt the selected volume?</entry>
<entrylang="en"key="CONFIRM_CASCADE_FOR_SYS_ENCRYPTION">Warning: If you use a cascade of ciphers for system encryption, you may encounter the following issues:\n\n1) The VeraCrypt Boot Loader is larger than normal and, therefore, there is not enough space in the first drive track for a backup of the VeraCrypt Boot Loader. Hence, whenever it gets damaged (which often happens, for example, during inappropriately designed anti-piracy activation procedures of certain programs), you will need to use the VeraCrypt Rescue Disk to boot or to repair the VeraCrypt Boot Loader.\n\n2) On some computers, resuming from hibernation takes longer.\n\nThese potential issues can be prevented by choosing a non-cascade encryption algorithm (e.g. AES).\n\nAre you sure you want to use a cascade of ciphers?</entry>
<entrylang="en"key="NOTE_CASCADE_FOR_SYS_ENCRYPTION">If you encounter any of the previously described problems, decrypt the partition/drive (if it is encrypted) and then try encrypting it again using a non-cascade encryption algorithm (e.g. AES).</entry>
<entrylang="en"key="UPDATE_TC_IN_DECOY_OS_FIRST">WARNING: For safety and security reasons, you should update VeraCrypt on the decoy operating system before you update it on the hidden operating system.\n\nTo do so, boot the decoy system and run the VeraCrypt installer from within it. Then boot the hidden system and run the installer from within it as well.\n\nNote: The decoy system and the hidden system share a single boot loader. If you upgraded VeraCrypt only on the hidden system (but not on the decoy system), the decoy system would contain a VeraCrypt driver and VeraCrypt applications whose version numbers are different from the version number of the VeraCrypt Boot Loader. Such a discrepancy might indicate that there is a hidden operating system on this computer.\n\n\nDo you want to continue?</entry>
<entrylang="en"key="UPDATE_TC_IN_HIDDEN_OS_TOO">The version number of the VeraCrypt Boot Loader that booted this operating system is different from the version number of the VeraCrypt driver (and of the VeraCrypt applications) installed on this system.\n\nYou should run the VeraCrypt installer (whose version number is the same as the one of the VeraCrypt Boot Loader) to update VeraCrypt on this operating system.</entry>
<entrylang="en"key="BOOT_LOADER_VERSION_DIFFERENT_FROM_DRIVER_VERSION">The version number of the VeraCrypt Boot Loader that booted this operating system is different from the version number of the VeraCrypt driver (and of the VeraCrypt applications) installed on this system. Note that older versions may contain bugs fixed in later versions.\n\nIf you did not boot from the VeraCrypt Rescue Disk, you should reinstall VeraCrypt or upgrade it to the latest stable version (the boot loader will be updated too).\n\nIf you booted from the VeraCrypt Rescue Disk, you should update it ('System' > 'Create Rescue Disk').</entry>
<entrylang="en"key="BOOT_LOADER_UPGRADE_OK">The VeraCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk' after you restart your computer.</entry>
<entrylang="en"key="BOOT_LOADER_UPGRADE_OK_HIDDEN_OS">The VeraCrypt Boot Loader has been upgraded.\n\nIt is strongly recommended that you boot the decoy operating system and then create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="BOOT_LOADER_UPGRADE_FAILED">Failed to upgrade the VeraCrypt Boot Loader.</entry>
<entrylang="en"key="SYS_DRIVE_SIZE_PROBE_TIMEOUT">VeraCrypt failed to detect the real size of the system drive and, therefore, the size reported by the operating system (which may be smaller than the real size) will be used. Also note that this is not a bug in VeraCrypt.</entry>
<entrylang="en"key="HIDDEN_SECTOR_DETECTION_FAILED_PREVIOUSLY">WARNING: It appears that VeraCrypt has already tried to detect hidden sectors on this system drive. If you encountered any problems during the previous detection process, you can avoid the problems by skipping the detection of hidden sectors now. Note that if you do so, VeraCrypt will use the size reported by the operating system (which may be smaller than the real size of the drive).\n\nNote that this issue is not caused by a bug in VeraCrypt.</entry>
<entrylang="en"key="SKIP_HIDDEN_SECTOR_DETECTION">Skip detection of hidden sectors (use the size reported by the operating system)</entry>
<entrylang="en"key="RETRY_HIDDEN_SECTOR_DETECTION">Try to detect hidden sectors again</entry>
<entrylang="en"key="ENABLE_BAD_SECTOR_ZEROING">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nThe process of in-place encryption can continue only when the sectors have been made readable again. VeraCrypt can attempt to make these sectors readable by writing zeros to the sectors (subsequently such all-zero blocks would be encrypted). However, note that any data stored in the unreadable sectors will be lost. If you want to avoid that, you can attempt to recover portions of the corrupted data using appropriate third-party tools.\n\nNote: In case of physically damaged sectors (as opposed to mere data corruption and checksum errors) most types of storage devices internally reallocate the sectors when data is attempted to be written to them (so the existing data in the damaged sectors may remain unencrypted on the drive).\n\nDo you want VeraCrypt to write zeroes to unreadable sectors?</entry>
<entrylang="en"key="DISCARD_UNREADABLE_ENCRYPTED_SECTORS">Error: Content of one or more sectors on the disk cannot be read (probably due to a physical defect).\n\nTo be able to proceed with decryption, VeraCrypt will have to discard the content of the unreadable sectors (the content will be replaced with pseudorandom data). Please note that, before proceeding, you can attempt to recover portions of any corrupted data using appropriate third-party tools.\n\nDo you want VeraCrypt to discard data in the unreadable sectors now?</entry>
<entrylang="en"key="ZEROED_BAD_SECTOR_COUNT">Note: VeraCrypt has replaced the content of %I64d unreadable sectors (%s) with encrypted all-zero plaintext blocks.</entry>
<entrylang="en"key="SKIPPED_BAD_SECTOR_COUNT">Note: VeraCrypt has replaced the content of %I64d unreadable sectors (%s) with pseudorandom data.</entry>
<entrylang="en"key="ENTER_TOKEN_PASSWORD">Enter password/PIN for token '%s':</entry>
<entrylang="sl"key="PKCS11_LIB_LOCATION_HELP">Zato da lahko VeraCrypt-u omogočite dostop do varnostega žetona ali pametne kartice, morate prvo izbrati programsko knjižico PKCS#11 za varnostni žeton ali pametno kartico. Tovrstna knjižica je lahko priložena z napravo ali pa si jo je možno shraniti iz spletne strani proizvajalca ali drugih tretjih strani.\n\nPotem ko si naložite knjižico, jo lahko ali ročno izberete preko 'Izberi knjižico' ali pa dovolite VeraCrypt-u, da jo sam najde in samodejno izbere z klikom na 'Samodejno zaznaj knjižico' (samo sistemski direktorij Oken bo preiskan).</entry>
<entrylang="en"key="SELECT_PKCS11_MODULE_HELP">Note: For the filename and location of the PKCS #11 library installed for your security token or smart card, please refer to the documentation supplied with the token, card, or third-party software.\n\nClick 'OK' to select the path and filename.</entry>
<entrylang="sl"key="NO_PKCS11_MODULE_SPECIFIED">Zato da lahko VeraCryptu omogočite dostop do varnostnega žetona ali pametne kartice, morate prvo izbrati programsko knjižico PKCS#11 za varnostni žeton ali pametno kartico. To lahko storite tako, da izberete 'Nastavitve' > 'Varnostni žetoni'.</entry>
<entrylang="en"key="PKCS11_MODULE_INIT_FAILED">Failed to initialize PKCS #11 security token library.\n\nPlease make sure the specified path and filename refer to a valid PKCS #11 library. To specify a PKCS #11 library path and filename, select 'Settings' > 'Security Tokens'.</entry>
<entrylang="en"key="PKCS11_MODULE_AUTO_DETECTION_FAILED">No PKCS #11 library has been found in the Windows system directory.\n\nPlease make sure that a PKCS #11 library for your security token (or for your smart card) is installed (such a library may be supplied with the token/card or it may be available for download from the website of the vendor or other third parties). If it is installed in a directory other than the Windows system directory, click 'Select Library' to locate the library (e.g. in the folder where the software for the token/card is installed).</entry>
<entrylang="en"key="NO_TOKENS_FOUND">No security token found.\n\nPlease make sure your security token is connected to your computer and the correct device driver for your token is installed.</entry>
<entrylang="en"key="TOKEN_KEYFILE_NOT_FOUND">Security token keyfile not found.</entry>
<entrylang="en"key="TOKEN_KEYFILE_ALREADY_EXISTS">A security token keyfile with the same name already exists.</entry>
<entrylang="en"key="CONFIRM_SEL_FILES_DELETE">Do you want to delete the selected files?</entry>
<entrylang="en"key="INVALID_TOKEN_KEYFILE_PATH">Security token keyfile path is invalid.</entry>
<entrylang="en"key="CKR_PIN_INCORRECT">Password for security token is incorrect.</entry>
<entrylang="en"key="CKR_DEVICE_MEMORY">The security token does not have enough memory/space to perform the requested operation.\n\nIf you are attempting to import a keyfile, you should select a smaller file or use a keyfile generated by VeraCrypt (select 'Tools' > 'Keyfile Generator').</entry>
<entrylang="sl"key="ALL_TOKEN_SESSIONS_CLOSED">Vse odprte varnostne žetonske seje so bile zaprte.</entry>
<entrylang="en"key="BOOT_PASSWORD_CACHE_KEYBOARD_WARNING">IMPORTANT: Please note that pre-boot authentication passwords are always typed using the standard US keyboard layout. Therefore, a volume that uses a password typed using any other keyboard layout may be impossible to mount using a pre-boot authentication password (note that this is not a bug in VeraCrypt). To allow such a volume to be mounted using a pre-boot authentication password, follow these steps:\n\n1) Click 'Select File' or 'Select Device' and select the volume.\n2) Select 'Volumes' > 'Change Volume Password'.\n3) Enter the current password for the volume.\n4) Change the keyboard layout to English (US) by clicking the Language bar icon in the Windows taskbar and selecting 'EN English (United States)'.\n5) In VeraCrypt, in the field for the new password, type the pre-boot authentication password.\n6) Confirm the new password by retyping it in the confirmation field and click 'OK'.\nWARNING: Please keep in mind that if you follow these steps, the volume password will always have to be typed using the US keyboard layout (which is automatically ensured only in the pre-boot environment).</entry>
<entrylang="en"key="SYS_FAVORITES_KEYBOARD_WARNING">System favorite volumes will be mounted using the pre-boot authentication password. If any system favorite volume uses a different password, it will not be mounted.</entry>
<entrylang="en"key="SYS_FAVORITES_ADMIN_ONLY_INFO">Please note that if you need to prevent normal VeraCrypt volume actions (such as 'Dismount All', auto-dismount, etc.) from affecting system favorite volumes, you should enable the option 'Allow only administrators to view and dismount system favorite volumes in VeraCrypt'. In addition, when VeraCrypt is run without administrator privileges (the default on Windows Vista and later), system favorite volumes will not be displayed in the drive letter list in the main VeraCrypt application window.</entry>
<entrylang="en"key="SYS_FAVORITES_ADMIN_ONLY_WARNING">IMPORTANT: Please keep in mind that if this option is enabled and VeraCrypt does not have administrator privileges, mounted system favorite volumes are NOT displayed in the VeraCrypt application window and they cannot be dismounted. Therefore, if you need e.g. to dismount a system favorite volume, please right-click the VeraCrypt icon (in the Start menu) and select 'Run as administrator' first. The same limitation applies to the 'Dismount All' function, 'Auto-Dismount' functions, 'Dismount All' hot keys, etc.</entry>
<entrylang="en"key="SETTING_REQUIRES_REBOOT">Note that this setting takes effect only after the operating system is restarted.</entry>
<entrylang="en"key="COMMAND_LINE_ERROR">Error while parsing command line.</entry>
<entrylang="en"key="SELECT_FILE_AND_MOUNT">Select &File and Mount...</entry>
<entrylang="en"key="SELECT_DEVICE_AND_MOUNT">Select &Device and Mount...</entry>
<entrylang="en"key="DISABLE_NONADMIN_SYS_FAVORITES_ACCESS">Allow only administrators to view and dismount system favorite volumes in VeraCrypt</entry>
<entrylang="en"key="MOUNT_SYSTEM_FAVORITES_ON_BOOT">Mount system favorite volumes when Windows starts (in the initial phase of the startup procedure)</entry>
<entrylang="en"key="MOUNTED_VOLUME_DIRTY">Warning: The filesystem on the volume mounted as '%s' was not cleanly dismounted and thus may contain errors. Using a corrupted filesystem can cause data loss or data corruption.\n\nNote: Before you physically remove or switch off a device (such as a USB flash drive or an external hard drive) where a mounted VeraCrypt volume resides, you should always dismount the VeraCrypt volume in VeraCrypt first.\n\n\nDo you want Windows to attempt to detect and fix errors (if any) on the filesystem?</entry>
<entrylang="en"key="SYS_FAVORITE_VOLUME_DIRTY">Warning: One or more system favorite volumes were not cleanly dismounted and thus may contain filesystem errors. Please see the system event log for further details.\n\nUsing a corrupted filesystem can cause data loss or data corruption. You should check the affected system favorite volume(s) for errors (right-click each of them in VeraCrypt and select 'Repair Filesystem').</entry>
<entrylang="en"key="FILESYS_REPAIR_CONFIRM_BACKUP">Warning: Repairing a damaged filesystem using the Microsoft 'chkdsk' tool might cause loss of files in damaged areas. Therefore, it is recommended that you first back up the files stored on the VeraCrypt volume to another, healthy, VeraCrypt volume.\n\nDo you want to repair the filesystem now?</entry>
<entrylang="en"key="MOUNTED_CONTAINER_FORCED_READ_ONLY">Volume '%s' has been mounted as read-only because write access was denied.\n\nPlease make sure the security permissions of the file container allow you to write to it (right-click the container and select Properties > Security).\n\nNote that, due to a Windows issue, you may see this warning even after setting the appropriate security permissions. This is not caused by a bug in VeraCrypt. A possible solution is to move your container to, e.g., your 'Documents' folder.\n\nIf you intend to keep your volume read-only, set the read-only attribute of the container (right-click the container and select Properties > Read-only), which will suppress this warning.</entry>
<entrylang="en"key="MOUNTED_DEVICE_FORCED_READ_ONLY">Volume '%s' had to be mounted as read-only because write access was denied.\n\nPlease make sure no other application (e.g. antivirus software) is accessing the partition/device on which the volume is hosted.</entry>
<entrylang="en"key="MOUNTED_DEVICE_FORCED_READ_ONLY_WRITE_PROTECTION">Volume '%s' has been mounted as read-only because the operating system reported the host device to be write-protected.\n\nPlease note that some custom chipset drivers have been reported to cause writable media to falsely appear write-protected. This problem is not caused by VeraCrypt. It may be solved by updating or uninstalling any custom (non-Microsoft) chipset drivers that are currently installed on this system.</entry>
<entrylang="en"key="LIMIT_ENC_THREAD_POOL_NOTE">Note that the Hyper-Threading technology provides multiple logical cores per a single physical core. When Hyper Threading is enabled, the number selected above represents the number of logical processors/cores.</entry>
<entrylang="en"key="DISABLED_HW_AES_AFFECTS_PERFORMANCE">Note that hardware-accelerated AES is disabled, which will affect benchmark results (worse performance).\n\nTo enable hardware acceleration, select 'Settings' > 'Performance' and enable the corresponding option.</entry>
<entrylang="en"key="LIMITED_THREAD_COUNT_AFFECTS_PERFORMANCE">Note that the number of threads is currently limited, which will affect benchmark results (worse performance).\n\nTo utilize the full potential of the processor(s), select 'Settings' > 'Performance' and disable the corresponding option.</entry>
<entrylang="en"key="ASK_REMOVE_DEVICE_WRITE_PROTECTION">Do you want VeraCrypt to attempt to disable write protection of the partition/drive?</entry>
<entrylang="en"key="CONFIRM_SETTING_DEGRADES_PERFORMANCE">WARNING: This setting may degrade performance.\n\nAre you sure you want to use this setting?</entry>
<entrylang="en"key="HOST_DEVICE_REMOVAL_DISMOUNT_WARN">Before you physically remove or turn off a device containing a mounted volume, you should always dismount the volume in VeraCrypt first.\n\nUnexpected spontaneous dismount is usually caused by an intermittently failing cable, drive (enclosure), etc.</entry>
<entrylang="en"key="UNSUPPORTED_TRUECRYPT_FORMAT">This volume was created with TrueCrypt %x.%x but VeraCrypt supports only TrueCrypt volumes created with TrueCrypt 6.x/7.x series</entry>
<entrylang="en"key="PASSWORD_UTF8_INVALID">The entered password contains Unicode characters that couldn't be converted to UTF-8 representation.</entry>
<entrylang="en"key="INIT_DLL">Error: Failed to load a system library.</entry>
<entrylang="en"key="ERR_EXFAT_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected exFAT filesystem.</entry>
<entrylang="en"key="IDT_ENTROPY_BAR">Randomness Collected From Mouse Movements</entry>
<entrylang="en"key="IDC_FAVORITE_USE_VOLUME_ID">Use Volume ID to mount favorite</entry>
<entrylang="en"key="VOLUME_ID_INVALID">The Volume ID value is invalid</entry>
<entrylang="en"key="VOLUME_ID_NOT_FOUND">No Volume with the specified ID was found on the system</entry>
<entrylang="en"key="IDPM_COPY_VALUE_TO_CLIPBOARD">Copy Value to Clipboard...</entry>
<entrylang="en"key="IDC_DISABLE_BOOT_LOADER_PIM_PROMPT">Do not request PIM in the pre-boot authentication screen (PIM value is stored unencrypted on disk)</entry>
<entrylang="en"key="DISABLE_BOOT_LOADER_PIM_PROMPT">WARNING: Please keep in mind that if you enable this option, the PIM value will be stored unencrypted on the disk.\n\nAre you sure you want to enable this option?</entry>
<entrylang="en"key="PIM_TOO_BIG">Personal Iterations Multiplier (PIM) maximum value is 2147468.</entry>
<entrylang="en"key="IDC_SKIP_RESCUE_VERIFICATION">Skip Rescue Disk verification</entry>
<entrylang="en"key="IDC_HIDE_WAITING_DIALOG">Don't show wait message dialog when performing operations</entry>
<entrylang="en"key="IDC_DISABLE_BOOT_LOADER_HASH_PROMPT">Do not request Hash algorithm in the pre-boot authentication screen</entry>
<entrylang="en"key="KUZNYECHIK_HELP">Kuznyechik is a block cipher first published in 2015 and defined in the National Standard of the Russian Federation GOST R 34.12-2015 and also in RFC 7801. 256-bit key, 128-bit block. Mode of operation is XTS.</entry>
<entrylang="en"key="CAMELLIA_HELP">Jointly developed by Mitsubishi Electric and NTT of Japan. First published on 2000. 256-bit key, 128-bit block. Mode of operation is XTS. It has been approved for use by the ISO/IEC, the European Union's NESSIE project and the Japanese CRYPTREC project.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_INFO">Before you can encrypt the partition, you must create a VeraCrypt Rescue Disk (VRD), which serves the following purposes:\n\n- If the VeraCrypt Boot Loader, master key, or other critical data gets damaged, the VRD allows you to restore it (note, however, that you will still have to enter the correct password then).\n\n- If Windows gets damaged and cannot start, the VRD allows you to permanently decrypt the partition before Windows starts.\n\n- The VRD will contain a backup of the present EFI boot loader and will allow you to restore it if necessary.\n\nThe VeraCrypt Rescue Disk ZIP image will be created in the location specified below.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_EXTRACT_INFO">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you need to extract it to a USB stick that is formatted as FAT/FAT32.\n\n%lsAfter you create the Rescue Disk, click Next to verify that it has been correctly created.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_EXTRACT_INFO_NO_CHECK">The Rescue Disk ZIP image has been created and stored in this file:\n%s\n\nNow you should either extract the image to a USB stick that is formatted as FAT/FAT32 or move it to a safe location for later use.\n\n%lsClick Next to continue.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_EXTRACT_INFO_NOTE">IMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\n</entry>
<entrylang="en"key="RESCUE_DISK_EFI_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk, please eject and reinsert the USB stick; then click Next to try again. If this does not help, please try another USB stick and/or another ZIP software.\n\nIf you have not extracted the Rescue Disk yet, please do so, and then click Next.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created before you started this wizard, please note that such Rescue Disk cannot be used, because it was created for a different master key. You need to extract the newly generated Rescue Disk ZIP image.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_NON_WIZARD_CHECK_FAILED">Cannot verify that the Rescue Disk has been correctly extracted.\n\nIf you have extracted the Rescue Disk image to a USB stick, please eject it and reinsert it; then try again. If this does not help, please try other ZIP software and/or medium.\n\nIf you attempted to verify a VeraCrypt Rescue Disk created for a different master key, password, salt, etc., please note that such Rescue Disk will always fail this verification. To create a new Rescue Disk fully compatible with your current configuration, select 'System' > 'Create Rescue Disk'.</entry>
<entrylang="en"key="RESCUE_DISK_EFI_NON_WIZARD_CREATION">The Rescue Disk image has been created and stored in this file:\n%s\n\nNow you need to extract the Rescue Disk image to a USB stick that is formatted as FAT/FAT32.\n\nIMPORTANT: Note that the zip file must be extracted directly to the root of the USB stick. For example, if the drive letter of the USB stick is E: then extracting the zip file should create a folder E:\\EFI on the USB stick.\n\nAfter you create the Rescue Disk, select 'System' > 'Verify Rescue Disk' to verify that it has been correctly created.</entry>
<entrylang="en"key="ERR_REFS_INVALID_VOLUME_SIZE">The volume file size specified in the command line is incompatible with selected ReFS filesystem.</entry>
<entrylang="en"key="EDIT_DCSPROP_FOR_ADVANCED_ONLY">WARNING: Inexperienced users should never attempt to manually edit boot loader configurations.\n\nContinue?</entry>
<entrylang="en"key="DCSPROP_XML_VALIDATION_FAILED">WARNING: Failed to validate the XML format of the Boot Loader configuration. Please check your modifications.</entry>
<entrylang="en"key="AFTER_UPGRADE_RESCUE_DISK">It is strongly recommended that you create a new VeraCrypt Rescue Disk (which will contain the new version of the VeraCrypt Boot Loader) by selecting 'System' > 'Create Rescue Disk'.\nDo you want to do it now?</entry>
<entrylang="en"key="IDC_ALLOW_TRIM_NONSYS_SSD">Allow TRIM command for non-system SSD partition/drive</entry>
<entrylang="en"key="IDC_BLOCK_SYSENC_TRIM">Block TRIM command on system partition/drive</entry>
<entrylang="en"key="WINDOWS_EFI_BOOT_LOADER_MISSING">ERROR: Windows EFI system loader could not be located on the disk. Operation will be aborted.</entry>
<entrylang="en"key="SYSENC_EFI_UNSUPPORTED_SECUREBOOT">It is currently not possible to encrypt a system if SecureBoot is enabled and if VeraCrypt custom keys are not loaded into the machine firmware. SecureBoot needs to be disabled in the BIOS configuration in order to allow system encryption to proceed.</entry>
<entrylang="en"key="PASSWORD_PASTED_TRUNCATED">Pasted text truncated because the password maximum length is %d characters</entry>
<entrylang="en"key="PASSWORD_MAXLENGTH_REACHED">Password already reached its maximum length of %d characters.\nNo additional character is allowed.</entry>
<entrylang="en"key="CONFIRM_ALLOW_WINDOWS_DEFRAG">WARNING: Defragmenting non-system partitions/drives may leak metadata about their content or cause issues with hidden volumes they may contain.\n\nContinue?</entry>
<entrylang="en"key="MOUNTED_VOLUME_NOT_ASSOCIATED">The selected mounted volume is not associated with its drive letter in Windows and so it can not be opened in Windows Explorer.</entry>
<entrylang="en"key="IDC_CLEAR_KEYS_ON_NEW_DEVICE_INSERTION">Clear encryption keys from memory if a new device is inserted</entry>
<entrylang="en"key="CLEAR_KEYS_ON_DEVICE_INSERTION_WARNING">IMPORTANT NOTES:\n - Please keep in mind that this option will not persist after a shutdown/reboot so you will need to select it again next time the machine is started.\n\n - With this option enabled and after a new device is connected, the machine will freeze and it will eventually crash with a BSOD since Windows can not access the encrypted disk after its keys are cleared from memory.\n</entry>
<entrylang="en"key="RAM_ENCRYPTION_DISABLE_HIBERNATE">WARNING: RAM encryption is not compatible with Windows Hibernate and Windows Fast Startup features. VeraCrypt needs to disable them before activating RAM encryption.\n\nContinue?</entry>
<entrylang="en"key="CONFIRM_DISABLE_FAST_STARTUP">WARNING: Windows Fast Startup is enabled and it is known to cause issues when working with VeraCrypt volumes. It is advised to disable it for better security and usability.\n\nDo you want to disable Windows Fast Startup?</entry>
<entrylang="en"key="QUICK_FORMAT_HELP">In order to enable your operating system to mount your new volume, it has to be formatted with a filesystem. Please select a filesystem type.\n\nIf your volume is going to be hosted on a device or partition, you can use 'Quick format' to skip encryption of free space of the volume.</entry>
<entrylang="en"key="IDC_ENABLE_HARDWARE_ENCRYPTION_NEG">Do not accelerate AES encryption/decryption by using the AES instructions of the processor</entry>
<entrylang="en"key="IDM_ADD_ALL_VOLUME_TO_FAVORITES">Add All Mounted Volumes to Favorites...</entry>
<entrylang="en"key="TASKICON_PREF_MENU_ITEMS">Task Icon Menu Items</entry>
<entrylang="en"key="DISK_FREE">Free space available: {0}</entry>
<entrylang="en"key="VOLUME_SIZE_HELP">Please specify the size of the container to create. Note that the minimum possible size of a volume is 292 KiB.</entry>
<entrylang="en"key="LINUX_CONFIRM_INNER_VOLUME_CALC">WARNING: You have selected a filesystem other than FAT for the outer volume.\nPlease Note that in this case VeraCrypt can't calculate the exact maximum allowed size for the hidden volume and it will use only an estimation that can be wrong.\nThus, it is your responsibility to use an adequate value for the size of the hidden volume so that it does not overlap the outer volume.\n\nDo you want to continue using the selected filesystem for the outer volume?</entry>
<entrylang="en"key="LINUX_OPEN_FINDER">Open Finder window for successfully mounted volume</entry>
<entrylang="en"key="LINUX_DISABLE_KERNEL_ONLY_SETTING">Please note that this setting takes effect only if use of the kernel cryptographic services is disabled.</entry>
<entrylang="en"key="LINUX_DISABLE_KERNEL_CRYPT_CONFIRM">Disabling the use of kernel cryptographic services can degrade performance.\n\nAre you sure?</entry>
<entrylang="en"key="LINUX_KERNEL_CRYPT_OPTION_CHANGE_MOUNTED_HINT">Please note that disabling this option may have no effect on volumes mounted using kernel cryptographic services.</entry>
<entrylang="en"key="LINUX_REMOUNT_BECAUSEOF_SETTING">Please note that any currently mounted volumes need to be remounted before they can use this setting.</entry>
<entrylang="en"key="LINUX_FIRST_AID">"Disk Utility will be launched after you press 'OK'.\n\nPlease select your volume in the Disk Utility window and press 'Verify Disk' or 'Repair Disk' button on the 'First Aid' page.</entry>
<entrylang="en"key="LINUX_MOUNT_ALL_DEV">Mount All Devices</entry>
<entrylang="en"key="LINUX_ERROR_LOADING_CONFIG">Error while loading configuration files located in </entry>
<entrylang="en"key="LINUX_SELECT_FREE_SLOT">Please select a free drive slot from the list.</entry>
<entrylang="en"key="LINUX_MESSAGE_ON_MOUNT_AGAIN">\n\nDo you want to show this message next time you mount such a volume?</entry>
<entrylang="en"key="LINUX_ONLY_TEXTMODE">This feature is currently supported only in text mode.</entry>
<entrylang="en"key="LINUX_FREE_SPACE_ON_DRIVE">Free space on drive {0}: is {1}.</entry>
<entrylang="en"key="LINUX_DYNAMIC_NOTICE">Please note that if your operating system does not allocate files from the beginning of the free space, the maximum possible hidden volume size may be much smaller than the size of the free space on the outer volume. This is not a bug in VeraCrypt but a limitation of the operating system.</entry>
<entrylang="en"key="LINUX_MAX_HIDDEN_SIZE">Maximum possible hidden volume size for this volume is {0}.</entry>
<entrylang="en"key="LINUX_OUTER_VOL_IS_MOUNTED">Outer volume has been successfully created and mounted as '{0}'. To this volume you should now copy some sensitive-looking files that you actually do NOT want to hide. The files will be there for anyone forcing you to disclose your password. You will reveal only the password for this outer volume, not for the hidden one. The files that you really care about will be stored in the hidden volume, which will be created later on. When you finish copying, click Next. Do not dismount the volume.\n\nNote: After you click Next, the outer volume will be analyzed to determine the size of uninterrupted area of free space whose end is aligned with the end of the volume. This area will accommodate the hidden volume, so it will limit its maximum possible size. The procedure ensures no data on the outer volume are overwritten by the hidden volume.</entry>
<entrylang="en"key="LINUX_ERROR_TRY_ENCRYPT_SYSTEM_DRIVE">Error: You are trying to encrypt a system drive.\n\nVeraCrypt can encrypt a system drive only under Windows.</entry>
<entrylang="en"key="LINUX_ERROR_TRY_ENCRYPT_SYSTEM_PARTITION">Error: You are trying to encrypt a system partition.\n\nVeraCrypt can encrypt system partitions only under Windows.</entry>
<entrylang="en"key="LINUX_WARNING_FORMAT_DESTROY_FS">WARNING: Formatting of the device will destroy all data on filesystem '{0}'.\n\nDo you want to continue?</entry>
<entrylang="en"key="LINUX_MOUNTET_HINT">The filesystem of the selected device is currently mounted. Please dismount '{0}' before proceeding.</entry>
<entrylang="en"key="LINUX_HIDDEN_PASS_NO_DIFF">The Hidden volume can't have the same password, PIM and keyfiles as the Outer volume</entry>
<entrylang="en"key="LINUX_NOT_FAT_HINT">Please note that the volume will not be formatted with a FAT filesystem and, therefore, you may be required to install additional filesystem drivers on platforms other than {0}, which will enable you to mount the volume.</entry>
<entrylang="en"key="LINUX_ERROR_SIZE_HIDDEN_VOL">Error: The hidden volume to be created is larger than {0} TB ({1} GB).\n\nPossible solutions:\n- Create a container/partition smaller than {0} TB.\n</entry>
<entrylang="en"key="LINUX_MAX_SIZE_HINT">- Use a drive with 4096-byte sectors to be able to create partition/device-hosted hidden volumes up to 16 TB in size</entry>
<entrylang="en"key="LINUX_DOT_LF">.\n</entry>
<entrylang="en"key="LINUX_NOT_SUPPORTED"> (not supported by components available on this platform).\n</entry>
<entrylang="en"key="LINUX_KERNEL_OLD">Your system uses an old version of the Linux kernel.\n\nDue to a bug in the Linux kernel, your system may stop responding when writing data to a VeraCrypt volume. This problem can be solved by upgrading the kernel to version 2.6.24 or later.</entry>
<entrylang="en"key="LINUX_VOL_DISMOUNTED">Volume {0} has been dismounted.</entry>
<entrylang="en"key="LINUX_CMD_HELP">VeraCrypt Command Line Help</entry>
<entrylang="en"key="LINUX_HIDDEN_FILES_PRESENT_IN_KEYFILE_PATH">\n\nWarning: Hidden files are present in a keyfile path. If you need to use them as keyfiles, remove the leading dot from their filenames. Hidden files are visible only if enabled in system options.</entry>
<entrylang="en"key="LINUX_EX2MSG_DEVICESECTORSIZEMISMATCH">Storage device and VC volume sector size mismatch</entry>
<entrylang="en"key="LINUX_EX2MSG_ENCRYPTEDSYSTEMREQUIRED">This operation must be performed only when the system hosted on the volume is running.</entry>
<entrylang="en"key="LINUX_EX2MSG_INSUFFICIENTDATA">Not enough data available.</entry>
<entrylang="en"key="LINUX_EX2MSG_KERNELCRYPTOSERVICETESTFAILED">Kernel cryptographic service test failed. The cryptographic service of your kernel most likely does not support volumes larger than 2 TB.\n\nPossible solutions:\n- Upgrade the Linux kernel to version 2.6.33 or later.\n- Disable use of the kernel cryptographic services (Settings > Preferences > System Integration) or use 'nokernelcrypto' mount option on the command line.</entry>
<entrylang="en"key="LINUX_EX2MSG_LOOPDEVICESETUPFAILED">Failed to set up a loop device.</entry>
<entrylang="en"key="LINUX_EX2MSG_MISSINGARGUMENT">A required argument is missing.</entry>
<entrylang="en"key="LINUX_EX2MSG_MISSINGVOLUMEDATA">Volume data missing.</entry>
<entrylang="en"key="LINUX_EX2MSG_MOUNTPOINTREQUIRED">Mount point required.</entry>
<entrylang="en"key="LINUX_EX2MSG_MOUNTPOINTUNAVAILABLE">Mount point is already in use.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDEMPTY">No password or keyfile specified.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDORKEYBOARDLAYOUTINCORRECT">\n\nNote that pre-boot authentication passwords need to be typed in the pre-boot environment where non-US keyboard layouts are not available. Therefore, pre-boot authentication passwords must always be typed using the standard US keyboard layout (otherwise, the password will be typed incorrectly in most cases). However, note that you do NOT need a real US keyboard; you just need to change the keyboard layout in your operating system.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDORMOUNTOPTIONSINCORRECT">\n\nNote: If you are attempting to mount a partition located on an encrypted system drive without pre-boot authentication or to mount the encrypted system partition of an operating system that is not running, you can do so by selecting 'Options >' > 'Mount partition using system encryption'.</entry>
<entrylang="en"key="LINUX_EX2MSG_PASSWORDTOOLONG">Password is longer than {0} characters.</entry>
<entrylang="en"key="LINUX_EX2MSG_PROTECTIONPASSWORDINCORRECT">Incorrect password to the protected hidden volume or the hidden volume does not exist.</entry>
<entrylang="en"key="LINUX_EX2MSG_PROTECTIONPASSWORDKEYFILESINCORRECT">Incorrect keyfile(s) and/or password to the protected hidden volume or the hidden volume does not exist.</entry>
<entrylang="en"key="LINUX_EX2MSG_STRINGFORMATTEREXCEPTION">Error while parsing formatted string.</entry>
<entrylang="en"key="LINUX_EX2MSG_TEMPORARYDIRECTORYFAILURE">Failed to create a file or directory in a temporary directory.\n\nPlease make sure that the temporary directory exists, its security permissions allow you to access it, and there is sufficient disk space.</entry>
<entrylang="en"key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZEHIDDENVOLUMEPROTECTION">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, outer volumes hosted on the drive cannot be mounted using hidden volume protection.\n\nPossible solutions:\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.\n- Backup the contents of the hidden volume and then update the outer volume.</entry>
<entrylang="en"key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZENOKERNELCRYPTO">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes on the drive can only be mounted using kernel cryptographic services.\n\nPossible solutions:\n- Enable use of the kernel cryptographic services (Preferences > System Integration).\n- Use a drive with 512-byte sectors.\n- Create a file-hosted volume (container) on the drive.</entry>
<entrylang="en"key="LINUX_EX2MSG_UNSUPPORTEDSECTORSIZE">Error: The drive uses a sector size other than 512 bytes.\n\nDue to limitations of components available on your platform, partition/device-hosted volumes cannot be created/used on the drive.\n\nPossible solutions:\n- Create a file-hosted volume (container) on the drive.\n- Use a drive with 512-byte sectors.\n- Use VeraCrypt on another platform.</entry>
<entrylang="en"key="LINUX_EX2MSG_VOLUMEHOSTINUSE">The host file/device is already in use.</entry>
<entrylang="en"key="VOLUME_HOST_IN_USE">WARNING: The host file/device {0} is already in use!\n\nIgnoring this can cause undesired results including system instability. All applications that might be using the host file/device should be closed before mounting the volume.\n\nContinue mounting?</entry>
<entrylang="en"key="CANT_INSTALL_WITH_EXE_OVER_MSI">VeraCrypt was previously installed using an MSI package and so it can't be updated using the standard installer.\n\nPlease use the MSI package to update your VeraCrypt installation.</entry>
<entrylang="en"key="SYS_ENCRYPTION_UPGRADE_UNSUPPORTED_ALGORITHM">VeraCrypt cannot be upgraded because the system partition/drive was encrypted using an algorithm that is not supported anymore.\nPlease decrypt your system before upgrading VeraCrypt and then encrypt it again.</entry>
<entrylang="en"key="LINUX_EX2MSG_TERMINALNOTFOUND">Supported terminal application could not be found, you need either xterm, konsole or gnome-terminal (with dbus-x11).</entry>
<entrylang="en"key="EXPANDER_INFO">:: VeraCrypt Expander ::\n\nExpand a VeraCrypt volume on the fly without reformatting\n\n\nAll kind of volumes (container files, disks and partitions) formatted with NTFS are supported. The only condition is that there must be enough free space on the host drive or host device of the VeraCrypt volume.\n\nDo not use this software to expand an outer volume containing a hidden volume, because this destroys the hidden volume!\n</entry>
<entrylang="en"key="IDC_STEPSEXPAND">1. Select the VeraCrypt volume to be expanded\n2. Click the 'Mount' button</entry>
<entrylang="en"key="IDT_INIT_SPACE">Fill new space: </entry>
<entrylang="en"key="EXPANDER_FREE_SPACE">%s free space available on host drive</entry>
<entrylang="en"key="EXPANDER_HELP_DEVICE">This is a device-based VeraCrypt volume.\n\nThe new volume size will be choosen automatically as the size of the host device.</entry>
<entrylang="en"key="EXPANDER_HELP_FILE">Please specify the new size of the VeraCrypt volume (must be at least %I64u KB larger than the current size).</entry>
<entrylang="en"key="QUICK_EXPAND_WARNING">WARNING: You should use Quick Expand only in the following cases:\n\n1) The device where the file container is located contains no sensitive data and you do not need plausible deniability.\n2) The device where the file container is located has already been securely and fully encrypted.\n\nAre you sure you want to use Quick Expand?</entry>
<entrylang="en"key="EXPANDER_STATUS_TEXT">IMPORTANT: Move your mouse as randomly as possible within this window. The longer you move it, the better. This significantly increases the cryptographic strength of the encryption keys. Then click 'Continue' to expand the volume.</entry>
<entrylang="en"key="EXPANDER_STATUS_TEXT_LEGACY">Click 'Continue' to expand the volume.</entry>
<entrylang="en"key="EXPANDER_CANCEL_WARNING">Warning: Volume expansion is in progress!\n\nStopping now may result in a damaged volume.\n\nDo you really want to cancel?</entry>
<entrylang="en"key="EXPANDER_HIDDEN_VOLUME_ERROR">An outer volume containing a hidden volume can't be expanded, because this destroys the hidden volume.\n</entry>
<entrylang="en"key="EXPANDER_SYSTEM_VOLUME_ERROR">A VeraCrypt system volume can't be expanded.</entry>
<entrylang="en"key="EXPANDER_NO_FREE_SPACE">Not enough free space to expand the volume</entry>
<entrylang="en"key="EXPANDER_WARNING_FILE_CONTAINER_JUNK">Warning: The container file is larger than the VeraCrypt volume area. The data after the VeraCrypt volume area will be overwritten.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_WARNING_FAT">Warning: The VeraCrypt volume contains a FAT file system!\n\nOnly the VeraCrypt volume itself will be expanded, but not the file system.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_WARNING_EXFAT">Warning: The VeraCrypt volume contains an exFAT file system!\n\nOnly the VeraCrypt volume itself will be expanded, but not the file system.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_WARNING_UNKNOWN_FS">Warning: The VeraCrypt volume contains an unknown or no file system!\n\nOnly the VeraCrypt volume itself will be expanded, the file system remains unchanged.\n\nDo you want to continue?</entry>
<entrylang="en"key="EXPANDER_ERROR_VOLUME_SIZE_TOO_SMALL">New volume size too small, must be at least %I64u kB larger than the current size.</entry>
<entrylang="en"key="EXPANDER_ERROR_VOLUME_SIZE_TOO_LARGE">New volume size too large, not enough space on host drive.</entry>
<entrylang="en"key="EXPANDER_ERROR_MAX_FILE_SIZE_EXCEEDED">Maximum file size of %I64u MB on host drive exceeded.</entry>
<entrylang="en"key="EXPANDER_ERROR_QUICKEXPAND_PRIVILEGES">Error: Failed to get necessary privileges to enable Quick Expand!\nPlease uncheck Quick Expand option and try again.</entry>
<entrylang="en"key="EXPANDER_ERROR_MAX_VC_VOLUME_SIZE_EXCEEDED">Maximum VeraCrypt volume size of %I64u TB exceeded!\n</entry>
<entrylang="en"key="WARN_FAST_CREATE">WARNING: You should use Fast Create only in the following cases:\n\n1) The device contains no sensitive data and you do not need plausible deniability.\n2) The device has already been securely and fully encrypted.\n\nAre you sure you want to use Fast Create?</entry>
<entrylang="en"key="EMV_KEYFILE_DATA_NOTFOUND">Unable to build a keyfile from the EMV card's data.\n\nOne of the following is missing:\n- ICC Public Key Certificate.\n- Issuer Public Key Certificate.\n- CPLC data.</entry>
<entrylang="en"key="FORMAT_EXTERNAL_FAILED">Windows format.com command failed to format the volume as NTFS/exFAT/ReFS: Error 0x%.8X.\n\nFalling back to using Windows FormatEx API.</entry>
<entrylang="en"key="FORMATEX_API_FAILED">Windows FormatEx API failed to format the volume as NTFS/exFAT/ReFS.\n\nFailure status = %s.</entry>
<entrylang="en"key="PARTIAL_SYSENC_MOUNT_READONLY">Warning: The system partition you attempted to mount was not fully encrypted. As a safety measure to prevent potential corruption or unwanted modifications, volume '%s' was mounted as read-only.</entry>
<entrylang="en"key="IDC_DISABLE_MEMORY_PROTECTION">Disable memory protection for Accessibility tools compatibility</entry>
<entrylang="en"key="DISABLE_MEMORY_PROTECTION_WARNING">WARNING: Disabling memory protection significantly reduces security. Enable this option ONLY if you rely on Accessibility tools, like Screen Readers, to interact with VeraCrypt's UI.</entry>
<entrylang="en"key="ERR_XTS_MASTERKEY_VULNERABLE">WARNING: The volume's master key is vulnerable to an attack that compromises data security.\n\nPlease create a new volume and transfer the data to it.</entry>
<entrylang="en"key="ERR_SYSENC_XTS_MASTERKEY_VULNERABLE">WARNING: The encrypted system's master key is vulnerable to an attack that compromises data security.\nPlease decrypt the system partition/drive and then re-encrypt it.</entry>
<entrylang="en"key="ERR_XTS_MASTERKEY_VULNERABLE_SHORT">WARNING: The volume's master key has a security vulnerability.</entry>
