VeraCrypt/README.md

This archive contains the source code of VeraCrypt.
It is based on original TrueCrypt 7.1a with security enhancements and modifications.


Important
=========

You may use the source code contained in this archive only if you accept and
agree to the license terms contained in the file 'License.txt', which is
included in this archive.

Note that the license specifies, for example, that a derived work must not be
called 'TrueCrypt' or 'VeraCrypt'



Contents
========

[I. Windows](#i-windows)

[II. Linux and Mac OS X](#ii-linux-and-mac-os-x)

[III. FreeBSD](#iii-freebsd) 

[IV. Third-Party Developers (Contributors)](#iv-third-party-developers-contributors) 

[V. Legal Information](#v-legal-information) 

[VI. Further Information](#vi-further-information) 



I. Windows
==========

Requirements for Building VeraCrypt for Windows:
------------------------------------------------

A detailed guide on how to build VeraCrypt on Windows can be found in 
the file doc/html/CompilingGuidelineWin.html. it is also available online
at https://www.veracrypt.fr/en/CompilingGuidelineWin.html

IMPORTANT:

The 64-bit editions of Windows Vista and later versions of Windows, and in
some cases (e.g. playback of HD DVD content) also the 32-bit editions, do not
allow the VeraCrypt driver to run without an appropriate digital signature.
Therefore, all .sys files in official VeraCrypt binary packages are digitally
signed with the digital certificate of the IDRIX, which was issued by 
GlobalSign certification authority. At the end of each official .exe and
.sys file, there are embedded digital signatures and all related certificates
(i.e. all certificates in the relevant certification chain, such as the
certification authority certificates, CA-MS cross-certificate, and the
IDRIX certificate).
Keep this in mind if you compile VeraCrypt and compare your binaries with the
official binaries. If your binaries are unsigned, the sizes of the official
binaries will usually be approximately 10 KiB greater than sizes of your 
binaries (there may be further differences if you use a different version of
the compiler, or if you install a different or no service pack for Visual
Studio, or different hotfixes for it, or if you use different versions of
the required SDKs).

Instructions for Signing and Packaging VeraCrypt for Windows:
-------------------------------------------------------------

First, create an environment variable 'WSDK81' pointing to the Windows SDK
for Windows 8.1 installation directory.
The folder "Signing" contains a batch file (sign.bat) that will sign all
VeraCrypt components using a code signing certificate present on the
certificate store and also build the final installation setup and MSI package.
The batch file suppose that the code signing certificate is issued by
GlobalSign. This is the case for IDRIX's certificate. If yours is issued by
another CA, then you should put its intermediate certificates in the "Signing"
folder and modify sign.bat accordingly.

In order to generate MSI packages, WiX Toolset v3.11 must be installed.

VeraCrypt EFI Boot Loader:
--------------------------

VeraCrypt source code contains pre-built EFI binaries under src\Boot\EFI.
The source code of VeraCrypt EFI Boot Loader is licensed under LGPL and
it is available at https://github.com/veracrypt/VeraCrypt-DCS.
For build instructions, please refer to the file src\Boot\EFI\Readme.txt.


II. Linux and Mac OS X
======================

A detailed guide on how to build VeraCrypt on Linux can be found in 
the file doc/html/CompilingGuidelineLinux.html. it is also available online
at https://www.veracrypt.fr/en/CompilingGuidelineLinux.html

Requirements for Building VeraCrypt for Linux and Mac OS X:
-----------------------------------------------------------

- GNU Make
- GNU C++ Compiler 4.0 or compatible
- Apple Xcode (Mac OS X only)
- YASM 1.3.0 or newer (Linux only, x86/x64 architecture only)
- pkg-config
- wxWidgets 3.0 shared library and header files installed or
  wxWidgets 3.0 library source code (available at https://www.wxwidgets.org)
- FUSE library and header files (available at https://github.com/libfuse/libfuse
  and https://osxfuse.github.io/)


Instructions for Building VeraCrypt for Linux and Mac OS X:
-----------------------------------------------------------

1) Change the current directory to the root of the VeraCrypt source code.

2) If you have no wxWidgets shared library installed, run the following
   command to configure the wxWidgets static library for VeraCrypt and to
   build it:

       $ make WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild

   The variable WX_ROOT must point to the location of the source code of the
   wxWidgets library. Output files will be placed in the './wxrelease/'
   directory.

3) To build VeraCrypt, run the following command:

       $ make

   or if you have no wxWidgets shared library installed:

       $ make WXSTATIC=1

4) If successful, the VeraCrypt executable should be located in the directory
   'Main'.

By default, a universal executable supporting both graphical and text user
interface (through the switch --text) is built.
On Linux, a console-only executable, which requires no GUI library, can be
built using the 'NOGUI' parameter:

    $ make NOGUI=1 WXSTATIC=1 WX_ROOT=/usr/src/wxWidgets wxbuild
    $ make NOGUI=1 WXSTATIC=1

On MacOSX, building a console-only executable is not supported.

Mac OS X specifics:
-----------------------------------------------------------

Under MacOSX, the SDK for OSX 11.3 is used by default. To use another version
of the SDK (i.e. 10.15), you can export the environment variable VC_OSX_TARGET:

	$ export VC_OSX_TARGET=10.15


Before building under MacOSX, pkg-config must be installed if not yet available.
Get it from https://pkgconfig.freedesktop.org/releases/pkg-config-0.28.tar.gz and
compile using the following commands :

	$ ./configure --with-internal-glib
	$ make
	$ sudo make install

After making sure pkg-config is available, download and install OSXFuse from
https://osxfuse.github.io/

The script build_veracrypt_macosx.sh available under "src/Build" performs the
full build of VeraCrypt including the creation of the installer pkg. It expects
to find the wxWidgets 3.1.2 sources at the same level as where you put
VeraCrypt sources (i.e. if "src" path is "/Users/joe/Projects/VeraCrypt/src"
then wxWidgets should be at "/Users/joe/Projects/wxWidgets-3.1.2")

The build process uses Code Signing certificates whose ID is specified in
src/Main/Main.make (look for lines containing "Developer ID Application" and
"Developer ID Installer"). You'll have to modify these lines to put the ID of
your Code Signing certificates or comment them if you don't have one.

Because of incompatibility issues with OSXFUSE, the SDK 10.9 generates a
VeraCrypt binary that has issues communicating with the OSXFUSE kernel extension.
Thus, we recommend using a different OSX SDK version for building VeraCrypt.



III. FreeBSD
============================

FreeBSD is supported starting from version 11.
The build requirements and instructions are the same as Linux except that gmake
should be used instead of make.



IV. Third-Party Developers (Contributors)
=========================================

If you intend to implement a feature, please contact us first to make sure:

1) That the feature has not been implemented (we may have already implemented
   it, but haven't released the code yet).
2) That the feature is acceptable.
3) Whether we need help of third-party developers with implementing the feature.

Information on how to contact us can be found at:
https://www.veracrypt.fr/



V. Legal Information
====================

Copyright Information
---------------------

This software as a whole:  
Copyright (c) 2013-2022 IDRIX. All rights reserved.

Portions of this software:  
Copyright (c) 2013-2022 IDRIX. All rights reserved.  
Copyright (c) 2003-2012 TrueCrypt Developers Association. All rights reserved.  
Copyright (c) 1998-2000 Paul Le Roux. All rights reserved.  
Copyright (c) 1998-2008 Brian Gladman, Worcester, UK. All rights reserved.  
Copyright (c) 1995-2017 Jean-loup Gailly and Mark Adler.  
Copyright (c) 2016 Disk Cryptography Services for EFI (DCS), Alex Kolotnikov  
Copyright (c) 1999-2017 Dieter Baron and Thomas Klausner.  
Copyright (c) 2013, Alexey Degtyarev. All rights reserved.  
Copyright (c) 1999-2016 Jack Lloyd. All rights reserved.  
Copyright (c) 2013-2019 Stephan Mueller <smueller@chronox.de>  
Copyright (c) 1999-2021 Igor Pavlov  

For more information, please see the legal notices attached to parts of the
source code.

Trademark Information
---------------------

Any trademarks contained in the source code, binaries, and/or in the
documentation, are the sole property of their respective owners.



VI. Further Information
=======================

https://www.veracrypt.fr